MTFCA Forum

closer inspection they were made from front hubs, appreciate the responses

Can you help identify these hubs, they fit a t front spindle, thought they might be for a ski, probably going to sell them for my top fund Thanks for your help

interested in pick up bed front and bumper and bumper brackets sent a pm, Thanks

Sorry it took a bit to reply wanted to mock up and get some pictures. Dan and Ken thank you very much for your guidance, all of my cars are made up of parts so its all refitting rough stuff i ended up with the wood kit top bow that came with car and marked 26-7 roadster the wood kit had one bow that...

Thank you both for your advice, i will put the windshield and top assembly back together and reassemble to fit everything on the roadster, and get some pictures got the touring top welded up and straightened, received the solid rivets for the top bows from langes need to figure out how to succesfull...

i have a 26-7 roadster i am having difficulty with top irons and bows, i have looked at the forum and found a few details (2013)however my top appears to wide, i measure car body at pivot on body at about 48 inches wide, top irons with bows at 54 wide, at pivot point where attatched to car . what is...

I do need both sides, the previous owner was going to hot rod it and had removed them, thanks for the picture helps to see what im looking for

front body to frame mounts were removed does anyone have replacements or a drawing to fabricate from? Thanks for your help

Thank you , just the info i needed , will heed the advice of fitting tack strip, been looking at possibly synthetic or laminating, the picture of end profile helps a bunch. the gentleman who started on the car passed away so i don't have much reference and am missing many small detail parts, my tour...

Can someone measure the location of where the top pivot should be located on a 26-7 roadster. the previous owner had started assembly and has welded 1x1 square tube to inside as shown, plan is to locate drill and tap and or weld top pivot in place and if possible send a picture of the tack strip ang...

Thanks for the input, a friend had sent me the screen shot, its on facebook in vero beach florida and there's a couple more pictures there, haven't seen the car in person, thought the tiller steering was interesting

[geima][/image]

said to be a 1904 any thoughts

thanks for your input
Dave

I don't have history on car, bought rolling chassis from a hot rodder, Working on a 26-7 transmission, upon disassembly found needle bearings (kaydon kn 162016) used in shaft rather than bushings, (drum side came apart during disassembly) both had discolored with heat. my plan is to replace needle b...