MTFCA Forum

It has to be for a coupe an early 23

I need the turtle deck assembly for a 1923 coupe with suicide doors. This is an early 23 which has the deck assembly separate from the main body.

It’s a brand new pad

The spring goes up into the frame ok. But when I tighten it down it pulls down on the left side , uneven from the right . Is there a certain position the clamps go in ?

I keep having trouble getting to get the rear spring in straight. Every time I clamp the u bolts down it pulls the spring down tighter on the one side making the spring sit angled down on the left side. This makes the car sit angled down on the left side. Is there a certain position for the spring c...

They don’t even teach them to write cursive any more, or to even sign there names.

Again what is the reduced price?

What was it reduced to?

I loved your live stream. It looks Canadians now how to have fun on a winters day.

I would like to buy it . Do you take PayPal?

I take a six pack Can you do PayPal? Let me know about shipping cost
John Leffler
1101 Blair Street
Lebanon ,Pa. 17046

Sold to John Thank you John and MTFCA

Pictures

I have owned this car for 34 years . It has an amateur restoration done in 1992 . It runs fair I am asking $7000 . I would negotiate also.

I want to put an inline fuse in my 23 . It would be a fuse holder and what amperage fuse should I use?

Sold Thank You MTFCA

Sold Hank You MTFCA

I sent you a email with contact info
Thanks for the interest

Did you send a p,m or email?

Back to the top

Would you be willing to ship to Pa. 17046 if I pre pay for shipping ?

Back to the top . I need to get this sold . Give me an offer.

It is a TT chassis

Back to the top . Help me get this sold

To the top

My friend is anxious this 1922 TT HUCKSTER truck. He has lowered his asking price to $9000 dollars.
If interested you can call his mechanic anytime to get the specifics on the vehicle. His number and name is 313-948-8919 Jose DeJesus.
Thank you for your interested.

Back to the top

I forget to include that the vehicle is a 1922. Any interst you may contact me by text a 717-304-3208 ,or through the forum.

My friend is selling his Model T Ford hucksters truck . Not sure of the year. I will forward any interest to him . He is asking $10.000 for it.

Horn Sold Thank David

Let me know what you think. $25.00 plus $15.00 shipping . I can do Pay Pal.

Photos attached . If you like the horn $25.00 plus shipping and handling.

I have a ahooga horn that I will sell. It has the short bezel , and is 6 volt. Needs a little cleaning for $25.00 . Let me know.

I hade my generator rebuilt and it’s not charging correctly. My friend said they may have wired it for a positive ground. How do I check this?

Is the turtle deck for a coupe or a roadster?

I have 1927 touring , paint red , body nice amateur restoration, motor runs fair ,should be rebuilt . I have owned this car for 32 years.
Pictures on request. Price $7000.

Is there a certain tightening sequence to tighten up the rear spring assembly? My 23 T coupe always tighten up more to the left side then the right. Which make the car lean to the left.

Thanks , book is on order.

Awhile back there was a post about the larger print edition of the service manual. Can you help me find this ?

Always looking forwarded Tuesday highlights. Thanks

Started dusting them off from there winter nap. Waiting for spring to go Ting again.

Re: Marietta, March 5, 2022 How about an address for the show .

How about an address for the show .

Where can I get the thermometer insert for a Boyce motor meter ? I can’t seem to find any parts supplier.

Ok ; got my axle straight and ready to put it back together. What is the best way to adjust toe in ,toe out?

I installing the front axle again after I had it straightened out .How do I identify a left from a right front spring perch? Is there a difference?

While depressing clutch for low gear , I get on occasions a slight squealing noise. Could it be time for new bands? Now it’s not all the time but every now and then. I thought maybe the rivets that bound the lining to the band. Opinions please.

Ok all finished with the differential rebuild, had the 23 out yesterday for a test drive. It was great.

The keys that I bought from the suppler fit the hub but not the new axle.

Just got everything remounted back on the 23 . I tried to fit the key way on to the new axles, but the slot where the key way fits is to tight. Is is common that you have to fit the key way to the new axle ? They fit perfectly into the wheel hub.

Great ideaI am stopping at the hardware store in the AM to get the external lock washers.

Ok ,so I finished my differential rebuild . Now should I put lock washers on the 7 bolts that hold the 2 halves together?

Ok ,so I got my differential haves put together with 3 bolt . I can turn the axles free spin with no end play. I can turn my ring gear without any binding. But how free should it spin? I have not put any grease on the inner bearing yet because as I said it is a fit test.

I Am assembling my differential and need a picture of the ring gear safety wiring. Any picture would be appreciated.

How do you replace the small studs on the ring carrier that hold the trust washers?

Looks very patriotic

I need to do better with my typing. I should have posted a closed spool.

Can I use the coded spool? That what is on it now. And the drive shaft tube bolts up flush to th pinion assembly . I think someone put a different driveshaft it at one time. And the bump side fits up correctly

I ave a 1923 coupe with a closed spool . I guess it called that it has a bump.

Is there any illustrated assembly drawings for drive shaft assembly?
My real interest is the drive shaft spool that holds the pinion bearing assembly.
What would be used for flat washers or shims between the end of the Hyatt bearing and the pinion nut.

Which is the best one to use ? Original , non adjustable or the adjustable.
Need some input on this.

While driving the 1923 Coupe. Everything was fine until I pulled out at the red light .I pushed the couch in and nothing.I got home on a trailer. I released the brake lever all the forward, and I could push the car back and forth no resistance. I thought a broken u joint. I pulled the rear and every...

I got mine today.

I had a 1964 Ford Fairlane Sport Coupe
1968 Dodge Super Bee
1973 Plymouth Duster
I often think of them and wish I could drive them one more .

Where did you get the shut off valve shown in the third post?

I see the reasoning for the switch being placed on the negative post in the vicinity of the the battery, sparks could occur causing battery gas’s to ignite. When I installed the switch on my 27 touring I placed it on the frame near the starter switch.

I work on fire apparatus , and all of the trucks that I service have two switches. One for the batteries, which is a positive connection and one for the ignition. And some of the older ones still use the colherse switch which is also a positive connection. In thirty years I have not seen any issues ...

I need a picture of the rear schakles for an early 23 coupe with suicide doors .

My drag link to the pitman arm is a little loose. I would like to use one of the apco spring loaded caps to take up the play. Have any of you fellow T guys used these.

I am in the process of putting window channel felt in my 1923 T coupe . I need to know does the window felt go all the way to the bottom of the window channel , or just the top half of the closed area.Iput a piece in the channel area but the channel area is curved, and will not allow the window to t...

What about nearby hotels? Should we be making reservations?

Why not , should age be a factor if the guy has all all of his abilities.

I would like to put a better brake system on my 23 coupe. I am undivided what to use . Have any of you t guys used the hydraulic brake system, what do you think? I know there are a lot of you t guys have the Rocky Mountain brakes . Is that the better way to go?

I want to put turn signals on my 23coupe . What are you guys using for lights and brackets?

Driving from Lebanon Pa.

I would like to find one like number 4. Somebody took the one off on my 23 along time ago, and made a wood box for it. It nice , but I would like the turtle deck instead.

Get Russ Firstnows book and get the correct information.

My holly nh side drain needs rebuilt. Can you t guys recommend a goto guy on the forum?

I drove my 23 T coupe today .we drove through IGMR military cemetary in Pa.to see the wreaths on the veterans grave.

You might want to check with some of the other posters. I think your new battery red battery cable should be souldered instead of crimped.

Just ask Russ .

Beautiful car. I see it even has a speadometer.

I got my new tires , now I am ready to install . Should I use rim liners? Yes / No

Ok I need to replace the tires on the front of my 23. As it is there is excess difference in the wear of the two tires. The one on the left seems to have worn evenly, while the on on the right has excess wear on the outer edge. What is the best way to check front end alignment?

It positively spectacular.

Is the Lurray Virginia T swap meet worth the visit?

Are you guys using any cooling system conditioner with your antifreezes? Something to lower the corrosion process.

Beautiful truck ,great restoration. Your workmanship is great.

My opinion save you money. Buy the correct tool for the job , you'll be glad you did.

I would like to put Rocky Mountain Brakes on my 23 coupe. Who's should I buy?

My 27 touting is Lizzie, my 23 coupe is Ottis.

It the way a T marks its territory .

Search found 91 matches