MTFCA Forum

are egypt lights still in business. Cant get the address to go thru. Need a bracket for my latest car

repro would work

Yes its for my Fordoor Approx 23" long

Need rod for carb adj rod

i will take it send info

If Allan does'nt buy it I will

got a horn thank you

sent a reply

I need a horn for my 26 fordor. Restoration just about complete except for a horn. Does'nt need to be pretty but needs to work good

I would like to purchase Send me PM with address

these say pat 4-6 -23 on them and RH and LH Cleveland

are these what you need

I see you have a 1928 Graham-Paige.I used to have one. Yours didnt come from Ill did it It was a 4door sedan

I bought Mikes kit for my 26 Fordor. It fit perfect. Top, interior and carpets. You get what you pay for. Very satisfied. Also bought a kit for my 24 touring. Top and interior. Very nice

I would like to buy a set of float valves if they are available, Im just finishing a 1926 4dor. I'm having a NH rebuilt for it Vern Enis 509-671-1382

don't need it any more made one. Have interior all done Ya Hoo

move to top has to be one somewhere???

I need the metal trim piece that goes inside the car below the header. See picture. Have my interior about done but need this piece. This is on another car of a friend

Well I thought I knew where the parts go but I can't find any old holes for them. Could someone give me a drawing. Thank you

OK. Thanks very much. I put all new channels in so I coverd up the old nail holes. I knew they went there some where.

move to top

I took these two parts off of the rear windows and I can't remember where they go. One for each side? Car is coming along good. Just painted the body. Still have the fenders and hood to paint. You have to lay down to look at the one picture!!!!!

would like to purchase. Send me total Vern

I would like to buy a copy if possible

if they dont get sold I will take them

That is what I needed . Thankyou John

can someone give me a diagram of the wiring for the dome light on me 4dor. I have the dome light and the switch is on the post but I don;'nt know where the wires go

If you happen to find another one I need one for my car

I will take them, Vern

Got my dome light, Thanks to Joe

Got my dash light Thanks Joe

Need a dash light for my 26 4 dor as picture

Need a dome light for my 4dor. See pictures provided by another member Thanks

Thank you for the pictures and info. Now I know what to look for

I bought a dome light but it does not match the mounting holes in my car. Maybe someone can identify it for me.It is 3" round and the mounting holes are 3 5/8 " apart. It was supposed to be for a "T". The mounting holes in my car are 4 1/8" apart. Thats the light that I need . Anyone have a picture ...

Thanks for the reply. OK guys, this is what I need

need a dash light for my 29 4dor Have no idea what it looks like. See the picture of the hole on the dash. The hole looks to be factory? Holes for mounting are 1 7/16" apart. Tabs look factory cut?

I need the top and bottom door hinges. Are they the same for each door just flipped over.These are for the left front that I need, but the right rear door seems to be the same. The hole the pin fits in is 1.2 " od. I have found some that were 5/8 " od that will not fit.

to everyone that has a fordor. I need the top and bottom door hinges . They seem to be the same on each door just flipped over. Its a 26. The part or barrel that the pin fits in is 1/2" od. I have found some 5/8 " od but they are not the right ones. Can someone help me. I will also post this in clas...

Does the window regulator have the spring on it

forgot to say left front door Drivers side in USA

I need the top and bottom hinges for a 1926 4 door sedan. I have the half that screws on the door but am missing the half that is on the door pillar. The pictures are of the top and bottom that I made. I would like the original parts Size is close to approximate. Let me know what you have. You could...

Ever heard "the checks in the mail" It really is, vern

Ed, for shipping I'm at POB 1812 Newport Wa 99156 Vern

Yes I want one pair. Send me the price and where to send the money Vern

I want them. Where do I send payment. Vern Enis

I will take them Do I send money to your store?

Need the gutter moldings for a 26 4dor sedan

Need the gutter moldings for a 26 4dor sedan

here a pictures of what I am looking for. The round black part of tailight, the spring that holds it in place and the glass lense that fits inside the black part

bump to top

bump to top please

WTB,for 1926 tailight, need only the round part and wire clip, I have the bracket,Dome light for 4door, wire spring for door window regulator

found my part, Thanks to Joe

bump to top

I need a top of the window seal trim piece. I have a 1926 fordoor that I need it for. The part is the same for top of all doors and rear windows. Maybe other years of coupes and sedans may be the same????

my mistake. I have two left side regulators. Need a right side rear door.

I need a window regulator for my 1926 fordor. Right rear door.( right description Alan} Someone installed a right side in the door so I have a extra right regulator.Will other years work ??Let me know price and shipping to Nwport Wa

you can call me at 509-671-1382 Vern

need two half hinges or two full hinges, one is3 1/2 " overall and one is 4 7/8 " overall. They are the top and bottom hinge for a sedan door. I have a door I cant hang without them.

Thank you Allen. I still need left side door hinges top and bottom Ehhh Drivers door left

the bottom hinge flange that screws to the pillar is about 4 1/4 " long and the top hinge flange is about2 3/4" long Ill try and load the pic but they probably wont be right side up. They are on my computer but not when I download them. I dont know what to do .0477 is the top and 0478 is the bottom

I made a mistake. I need hinges for the DRIVER door. Sorry for the mistake. Driver door!!!!!

I am missing half of each hinge. The half that attaches to the front door pillar. Top and bottom. Picture show door edge. Missing the top half and bottom half of the hinges. Have the complete center hinge Why do my pictures come out sideways?

I need the top and bottom hinges for a 1926 four door. Front passinger door

I need the top and bottom door hinges for a 26 4 door. Front pass side

This is what I started with

I have the wood temporally installed to make sure it fits.Front window is 1/16 out of square. That can be fixed easy enough. Back doors open and close very nice with good margerines. Now I.ll take it apart and get ready to glue and screw

I am not taking the whole car apart. The metal on the pass rear has come loose with the trim piece from the side window Plus the whole top needs do be replaced. I dont see a problem with that. I did restore a 1926 Nash that I had to replace all the wood in the top. Bows rails etc. I have to replace ...

I,m trying to ask questions before I take the car apart. Don,t want to back myself in a corner

OK I have looked at the cars Don Booth did. I will refer back to his post as I restore mine. One question I have is how do you reattach the trim that is nailed on around the rear window and across the back below the window. The nails are embeded in a lead or pot metal trim. Do you drill new holes an...

I have been looking at Don Booths cars that he did. What a beautiful job. I have learned a great deal already. Really looking forward to doing mine. Lots of fun hours ahead of me. Even saw the Bill Mullins name from Spokane Wa. Bought some wheels from him about ten years ago for my first T. Thanks e...

Thank you I will look at these older posts

has anybody restored a four door. I;m not getting much response.I have questions???

The trim that covers the joints on the sedan has nails imbeded in them Whats the solution to replace the nails that have come loose from the body. Somebody must have restored one of these. I want to do a 4 door sedan. Help me with information 1926 T

Starting a new project Anyone who has restored a four door I would like some input I have new wood that came with the car. I know I will need the trim piece that goes around the top. I have the windshields and doors motor and 98% of the parts I plan on a ground up restoration. This is my third T Jus...

Found my answer in the search part of the forum

I had my engine rebuilt and after machineing my head bolts are a 16 th to long . Im going to 2 1/2 " bolts. Do they need to be grade 5 or 8

started a new project Bought a basket case 24 touring with two extra frames,rear ends ,front ends Lots of fun for this winter

: IMG_0182[15359].jpg (32.2 KiB) Viewed 6109 times

[image]

[/image]

Search found 79 matches