MTFCA Forum

Re: OFF TOPIC, F.S. enclosed trailer New price as of 7/14/2025 $3500 obo

New price as of 7/14/2025
$3500 obo

Jay,
The rear doors open like barn doors and there are aluminum ramps that hook onto the end of the trailer

Re: OFF TOPIC, F.S. enclosed trailer New price as of 7/1/2025 $3750

New price as of 7/1/2025
$3750

To the top please

Interested, Where are these located?

Is this a car version or TT version?

In between fenders is 77”, the fenders are 10-1/2” tall
The door opening is 85” wide x 76” tall

To the top please

Bill, I do not know the weight of the trailer It has brakes on both axles It has two interior lights It has 4 e-tracks mounted to the floor It does not have a winch, but there is an access door on the front of the body that can open up. If you mounted a winch to the tongue the cable could pass throu...

Sort of off topic, but sort of not. This trailer has been used to haul many brass era cars. It’s a 8’ x 20’ Jensen enclosed trailer. 6 lug axles, 2-5/16” ball, stored inside its whole life until may 2025. Roof does not leak, a few repaired spots on the body (last picture) that were well done, but ov...

Once more to the top please

sent you an email

I don’t have plans but if you need any dimensions off of mine let me know

Thankful for the forum and all the nice folks in the T hobby. I was able to purchase this very nice TT jack at a great price.

New lower price, these would look great on a speedster!

George I sent you an email

Thanks Dan! That’s exactly what I was looking for!

I was lucky today a snagged a TT-5893 wrench at a swap meet. The description that the seller had on the tag read as follows: “Ford TT-5873 only made 1925-1927 for TT truck, spark plug, head bolt, and rim wrench” It got me thinking… what are the correct tools that were supplied with the ton trucks fr...

To the top please

Does anyone know where I can buy the rubber weather strip that goes on the vertical edge of the upper windshield frame (the upper half that can open up) on a steel closed cab TT (factory ford closed cab)?

Price reduced to $350

To the top please

For sale: Two gas tank brackets for a 14” ~ 15” round tank. 1.5” wide brass castings. They will need final sanding and polishing. Will look spectacular on your brass era speedster; Model-T, Simplex, Packard etc… $200 plus shipping. Please contact me through P.M. or email thru this website. E4E4F1CD-...

Email sent

Here’s my 26 TT the day I bought it in 2018. What you see in the picture is all that was included in the sale. 954698E4-CBDC-4906-9C15-A5528DD82CCF.jpeg Here it is today, still very much a project, but a lot more complete than when I bought it. 18F5F7F3-B2FB-4F00-B726-4F266BECCE1B.jpeg And here’s my...

Eric,
PM sent
-Nathan

What diameter is this steering wheel?

https://www.facebook.com/share/18JN1vuf ... tid=79PoIi

There’s a hand cranked dump bed for a model A on marketplace in Shelby, Ohio for $500.

Mark, I sent you a text.

I’d like to trade these low hood (17-22) hood shelves for a pair the later high hood (23-25) style. Looking for a nice set in similar condition to the ones I have. Not looking to sell, would really like to trade for the correct ones I need. I bought these at a swap meet thinking they were correct fo...

Wow amazing deal!

Any updates as to the status of the car’s repairs and journey?

Is there a way to contact the group to find their whereabouts? Would like to join up with them in Dalton/orrville/Wooster Ohio area

William ‘wingnut’ I’m in the Wooster area. Don’t know that I’d be able to swing in and tag along, but would sure like to see them go by. Do you know when they’re expected in our area? Their website says day 3 goes through Wooster, but I couldn’t find when it said the trip started.

I'm interested in the four footman loops if they're 2-1/4" center to center

Horn is sold

All items are sold

Bell is sold

Moo horn sale pending

The car is sold and headed to Wisconsin. Thank you MTFCA

Price reduced to $7500

Sold thanks MTFCA

Sale pending

Bell is sold

Whistle is sold

Anyone interested in the moo horn? MOO MOOOOO!

A lot of the hard and expensive work is already done! Get yourself a T for spring!

Price lowered to $180

Sold thanks MTFCA

For sale: bells and whistles, literally! I had these listed separately but having too many separate posts became confusing so here they are on one posting. Take your pick $150 each plus shipping. Item 1: Bevin brothers Bermuda bell. Nickel plated, mounts on the underside of the floor board and can b...

The car is located in Wooster, ohio

To the top please

Thank you Tom, it'll make someone a nice car with a little bit of work to finish it up and lucky for them a lot of the hard work is done and a lot of part’s already bought. I was restoring this car to be my “family car” model T and the only reason for selling is because I recently purchased another ...

Sold pending payment

For sale as-is 1927 model T Tudor sedan. $7500 obo Engine: The correct number matching engine for the car is not in the car, but it is included with the sale. I had it running briefly before putting my “spare” engine in. It ran fine and was quiet but was leaking badly around the hogs head felt. Curr...

Complete “Tickin Through Time” hidden 6v turn signal kit. Came off of a 1925 Tudor sedan, but would fit any T. I labeled everything as I took it off so it should be easy to install. Everything works fine other than I accidentally rolled over the turn signal toggle switch with my creeper during disas...

Lower price, could bring with me to Marietta Ohio swap meet this Saturday

Lower price, could bring with me to Marietta Ohio swap meet this Saturday

Lower price, could bring to Marietta Ohio swap meet this Saturday

Now that you mention it it does sort of sound like a cow.

For sale: variable pitch horn, unknown make, operates off of 6 volt and is lever operated. The position of the lever varies the pitch of the horn, cable operated (cable included). This horn was mounted on the drivers side frame rail of my T directly below the drivers seat and the lever was mounted o...

For sale: Bevin Bros. bell, nickel plated. Attaches to your floor board and is foot operated and produces a loud and clear “ding-dong!” Fun accessory for your T. Send me a PM and I can email or text you a video of it in action. $250 plus shipping. 202FD5CC-7E45-49DF-8437-D7E20D7343C7.jpeg A375425C-D...

Federal enterprises model “O” siren. Perfect for a model T or model A fire truck or for someone who just likes to make noise! Great addition for your T. Works well and is plenty loud! Send me a PM and I can email or text you a video of it in action. $150 plus shipping. 6416E80C-FD7A-4F12-8DF2-7C3297...

Sold thanks MTFCA

New price: $25 + shipping. To the top!

To the top please

To the top please

Sold thanks MTFCA

Sold thanks MTFCA

For sale: as is, anti shimmy springs. $15 + shipping

For sale as-is. Very nice original condition solid TT wheels. No rot or looseness in any of the wood. The solid tire is 32 x 3-1/2 made by Firestone in Akron Ohio. The rubber is not dry rotted. One wheel is missing its hub. I believe that these are in their original paint and would be a great additi...

Bruce, send me a private message with your address and I’ll figure shipping.

For sale, as is, Robinson auto jack (Vicksburg Mi) An easy way to store your T for the winter to avoid flat spots on your tires. Simply place one under each hub, pull the handle down, and done! Still in their original paint and labeling. Adjustable for other heights also. $180 + shipping for the set...

For sale, as is, accessory elevated timer, I do not have the cam gear for it, great for display in your accessory collection, conversation piece, or with some work make it usable. $25 + shipping. 9E79F2A9-8040-4A17-8A89-4869700B47CE.jpeg E6EC5B8D-2534-4873-87A1-ABF33DE43790.jpeg FB7AF27F-41B1-48C5-B...

For sale, as-is, Stewart speedometer, in nice shape, but will need rebuilt before use. $40 + shipping. Please respond through private message on the forum.

As others have stated, chassis ground is very important. I run an auxiliary ground wire from one of the hogs head bolts to the frame to ensure the engine is grounded to the chassis

I have a 1926 TT with a ford enclosed steel cab. What would be the proper floor mat to fit this? A 1915-25 open car front rubber floor mat? Or a 1926/7 open car front rubber floor mat? Pictures of a mat installed in a truck would be helpful too. Thanks!

To the top

For sale: 32 x 3-1/2 TT solid rear wheels. Rare to find in this condition!! Made by Firestone in Akron Ohio. One wheel is complete and one is missing the hub and brake drum. The wood in both wheels is very very nice and solid, no rot at all, not loose either. Both are still in what I believe to be o...

Stewart speedometer, brass rim, will need to be gone through. As-is $40 + shipping 9994FA64-A8AF-4688-AA45-5C48FE893AC4.jpeg 0D317A98-1646-45E0-8D3D-E354482A297E.jpeg Anti-shimmy spring accessory. As-is $20 + shipping AA335121-5023-40F4-91BF-7BA890779A96.jpeg Elevated timer, unknown make, interestin...

Thanks, that’s good to know. I’ve never recharged magnets before

James, what voltage does yours run off of and for how long do you charge the magnet?

Hello, a club member is trying to find out information about his magnetizer and I thought I’d post it on here to see if anyone could help. Google has not turned up anything useful so far when searching “FORE ELECTRIC CO.” You can see a + and - symbol pressed into the wood next to the terminals. I’d ...

I’m definitely interested! The Lincoln highway goes right through my hometown. I’ll pass this info along to our local mode T chapter.

Email sent

Email sent

Finally got the last of the parts cleaned up and painted and the field coil/ flywheel adjustments made. I thought this would be a quick and easy restoration but there are so many little parts in these HCCT’s. It seems to work as it should, I need to learn how to use it and adjust coils on it properl...

Lots of progress this past week and some picture updates. The main casting has been clear coated, and some reassembly has begun,the flywheel painted and magnets assembled, got my meter back from bob completely restored, new insulators made because many of the small ones were cracked, wiring installe...

283E6B7B-943E-4050-8D33-6133D86D4AFB.jpeg 1C323DE4-DFA2-489C-85C0-F1FA147415DF.jpeg Ron, the wire routing is quite distinctive and I intend on duplicating it. Both wires from the meter travel down together where they separate and go on either side of the shaft, then come back together and continue ...

Update: while cleaning up the main casting for the HCCT I discovered that the original paint is actually gray and is mostly in tact. Also, the company name tag is still visible, barely… so I’m changing course and instead of repainting the body it’s going to get a thorough cleaning and clear coat. Al...

Ok, so it sounds like it is not important to maintain continuity between the fly wheel and magnetic components. I kind of thought that because it is a magnetic field and not current flowing through the flywheel portion of the magneto. Also, with the spools originally being brass or aluminum instead ...

67A22052-0FDB-4E63-8BFA-BE2912DE3CDC.jpeg I’m finally getting around to restoring my HCCT. I’ve owned it for probably 12 years now and with needing to restore a couple sets of coils this winter I figured now is the time. I thought some of you might like to see some pictures during the restoration p...

Mike,
Just the frame or axles too?

Update: everything is sold. Thanks MTFCA

Update: everything is sold except group #1 (the complete warfard, shortened drive shaft and housing and radius rods. The sale of those items is still pending at the moment.

Update:
Group #1 is sold pending payment
I have also sold 4 gears out of group #2

I will try and get updated pictures of what is left uploaded soon.

James, What gears in particular are you looking for?

I sent you another e-mail, check again before I post my info on here. Both times when I sent an email I got a receipt that it was sent.

Email sent

Jack, I’d like to by these. I’ll send you a message as well.

Search found 151 matches