MTFCA Forum

I should have one

That brand & design of front springs/shocks were pointed out as a factor in the fatal crash of Ken Meek. My apologies for bringing this up. I do not like sabotaging people's for sale items. However, on these style shock absorbers, it is very important to keep reminding that the fronts of these shou...

Can we have at least a brief explanation of the design dangers? As I understand ut age and lack of maintainence cause the springs the break. Letting the center part of the shock fall down cause the car to drastically change front end geometry and causing especially the front axle to buckle under. I...

No idea on brand on spring is busted and missing 3 caps $80 shipped

I've got a pair 20$ plus the ride

Move to top

Move to top

Wood wheel big brake drums and hubs 50$ each both have nice keyways. Hub cap threads are so so drums are nice

Brake rod brackets one pair and 2 of the same side 10$ each plus the ride

Pair of nice windshield brackets part no T-7846-B $50 for the pair plus the ride

Stewart speedometer gear see pics for condition 40$ ea plus the ride

That tire mount you have is probably riveted to the frame 3 rivets each side if you lucky its bolted

More to top

1913 engine standard bore #1cyl has a nice wrist pin mark it will probably need a sleeve other cylinders look good what's you are buying in the block and rotating assembly no trans pan or hogs head they will be removed. $600 Local pick up pleasant prairie wisconsin

Nice set of 4 storage stands one is mismatched all work fine all will need new pads 200$ shipped lower 48

Sent a email several days ago with pics for you

Wayne Sheldon wrote: ↑
Mon Aug 18, 2025 6:32 am
Are most of those non-demountable wheels? If so, I sure wish you/they were a lot closer to me. I would want the wood as well as a few rims, but cannot justify the cost of shipping for me.

Shipping rims is easy and cheap they go cross county for about 20 to 45 $

I have one that needs some work that's can be budget friendly ill send you a email with some pics

I'll email you pics of the one I have

Move to top

Move to top

Move to top

Move to top

Move to top

Move to top

Move to top

Move to top

What size is this?

Decent patina horn some small dings and dents would be correct for 14 15 16 cars $100 shipped lower 48 SOLD

Nice zenith o4 carb for rebuild complete a little stiff nice float 200$ shipped lower 48

Move to top

Move to top

Move to top

I'll look in my band stash I may have loose ear if not I may have complete bands

Do you need one with drum or just the hub?

Move to top

Mine to top

Move to top

JonLong55 wrote: ↑
Wed Jul 02, 2025 12:33 am
Have you ever seen plans for the 15-22 touring car?

They are out there I have a few sets

ryanpad wrote: ↑
Mon Jun 30, 2025 10:05 pm
Do you have any of those still?

I always have these on hand this is a old post ill have to look and see if I have these specificly

More pictures

Decent brass orignal brass rad will need some repairs. Lower water outlet has several holes I have a replacement that will go with it. I did fill it up with water usual mouse nest in the top tank but seems to hold water well for being over 100 years old. $400 plus the ride would prefer local pickup ...

Pair of 1913 1914 12 rivet housings THE LEFT HOUSING HAS A CRACK thru one of the pinion spool bolt holes it is fixable. Will probably need to be re riveted the rivets have been peened over on the left side $ 250 for the pair plus shipping but would prefer local pickup located pleasant prairie wiscon...

Move to top

Move to top

Move to top

Move to top

I have just the out hoops if that helps you

Move to top

Move to top

Move to top

Thanks to all of you for your responses. I figured there was a "snowball's chance in hell" of finding one but it was worth a shot. I considered modifying the holes but questioned the wisdom of doing that. Glad to hear Ford recommended it and that it works. Karl, I appreciate you looking through you...

First one I grabbed measures 6 11/16 across the pattern

I can look thru my stash I may have one

Move to top

Move to top

Move to top

Move to top

Move to top

Move to top

Move to top

Come and getting them before the scrapper does 2 pairs I parted them out I've got a pile of whole axles don't need empty housings sitting around located pleasant prairie wisconsin. I would have to be heavily bribed to ship any of these

Move to top

Move to top

Nice used armature has been turned and checked 90$ shipped lower 48

Move to top

Move to top

Move to top

Move to top

Move to top

Ben just a fyi for me I post from my phone and I have to resize every pic to get them to post

For interest sake only, the primed shelves are not an exact pair, but easily made to be same. The one on the left is the latest style, having the big hole at the front for the hard rubber grommet that protects the headlight wiring. The other one has an inverted U shaped cutout in the inner edge to ...

Jones in Aiken SC wrote: ↑
Wed May 28, 2025 1:32 pm
Karl-
I'm late to the party here. Do you have any of these early ones left?

No I do not I did look I have some later ones tho

Fan mount / water outlet $45 each one missing fan 35$ plus the ride will probably need bushings one has pitting round the hos connection

Hood shelves pair in primer 50$ plus the ride fits 17 to 25. Rest are singles 15 each plus the ride

Coil boxes for starter cars 19-22 and all 22 -25 no tops no coils all have the latches all need work $20 each plus the ride

Top and bottom and sold middle is still available

Cheap empty coil boxes 30$ plus the ride for all 4 all have latches no wood no coils no tops

Dash choke pull 2 have the fire wall levers all are decent shape 10 each plus the ride

Orignal oil pipes all will need to be cleaned 20$each plus the ride

Small drum steel brake shoes good shape $50 plus the ride

Move to top

Moxie26 wrote: ↑
Mon May 26, 2025 4:09 pm
Don't bother, you'll learn someday.

No prob I run a business sir you'll be on the do not sell ro list thanks

Karl... If this item was sold before I responded to your post, why did you not , in courtesy to the purchaser and yourself , state that it was sold through the MTFCA forum? It sold Friday and I was not on the fourm over the weekend that's why. If you need one I have 3 others here shoot me an email

Moxie26 wrote: ↑
Sun May 25, 2025 2:42 pm
Sold. ..... Moxie26. Please email your contact info so I can send you a check. Thank you

Please don't post sold on my post it's not your post if you are needing one this one has sold but I believe I have another please email me directly thanks Karl

I'm not going to Richmond but I have them shipping isn't to bad on them and my parts are reasonable

Move to top

Move to top

Move to top

Water neck fan assembly nice shape 45$ plus the ride probably needs bushings

Nice complete riveted fan hub one blade is a bit tweeked tight rivets $30 plus the ride

Plenty of drive shaft spooks on hand 15$ plus the ride

Horn button missing the button inside part isn't pretty probably needs to be replaced as well 25$ shipped

Nice aftermarket tail lamp bracket no makers mark that I've found
$50 plus the ride

I'll take that to

Sent you a email

Move to top

Nice spare tire mount corner of the flage is bent and could probably use studs. I also have the Y forks avaliable if you have wood wheels spare carrier 70$ plus the ride

70 plus the ride

I've got them ill get some pics later

I have one good front and 2 that are bad altho one may be fixable

Search found 707 matches