MTFCA Forum

Are you permitted to drive your own T in Greenfield Village? Is that only during the once a year festival parade? Where do I find the details?

Still looking to buy a matching pair of 1923 Colorado license plates for my Runabout.
Thanks!

Thanks Terry, I would be very happy with either restored or original plates.

Still looking.

I’d like to buy a matching set of 1923 Colorado license plates.
TIA, Kevin

I’m interEsted in buying running board brackets if any for sale.

I called Steve Lang. He has one!

Anyone have a good rear u-bolt for sale? Doesn’t seem to appear on the vendors’ list.

Thinking Bob is a scammer… beware

Can you send me a dated picture and a price please?

Please let me know if you have one for sale.
Thanks, Kevin

Thanks!! I can sleep well now

Wondering about this rather large oval hole in my ‘25 Coupe firewall passenger side. Is it for a speedometer cable? Maybe it lets heat in? It’s not for carb adjusting rod, that fits elsewhere.

Alignment wasn’t good when I got it. Thought body to frame shims were supposed to fix it. I cleaned up frame rust, painted it after replacing a couple cracked body to frame brackets.

I recently put the body of my 1925 Coupe back on the frame. Passenger door aligned but driver door didn’t … low by 1/8 inch in the latch and gap at top rear of door. What is the process for aligning/shimming. I’ve loosened the three driver’s side mounting bolts, I’ve placed body to frame shims in va...

I installed Rocky Mtn brakes on my 1925. Seems I have to shim the axles to install wheels. I don’t like using shims - are there other options?

Will “tight” pistons and/or wrist pins break in with time and patience? Is there a process I should follow? Or are these reasons to pull an engine and work on internally immediately?

Someone before me had installed what looked like new pistons. 0.030 over…good compression. Do I continue running on level to “break them in”? Or is there a process for doing this?

Reassembled a non-running 1925 engine. Rebuilt coil box, new wiring harness, rebuilt carburetor… Starts right up, idles great…runs in low gear and high on level. After heated up completely loses power - stalls trying to pull in low gear. I have to let it cool off to even start it again? Any ideas wh...

Wanted: quality Ruckstell Rear End assembly for 1925 Coupe

Thanks for replying Scott, hope I don’t sound arrogant…I like to think I learned the lesson an easy way not the hard way. I’m so glad it happened now just as you implied. I’m never afraid to ask for advice (that’s why I posted my issue in the first place); but that all has to be balanced or I’d be p...

It is a different one as the teeth on the original were/are not optimal. I bought a used ring gear and it really seemed to be in good order. Now I’m thinking it must have been distorted even though the teeth were good.

Yikes! I wonder why it was so tight. Taking the old one off was such a pain that I thought the replacement had to be pressed on.

I tried pressing the ring gear on and it seemed to be taking too much force… well, it broke. This is after leaving the diff half it bolts to in the freezer for a couple days and after oiling the interface. Is it suppose to be this tight?

I’m replacing the rods on the ‘25 I bought because someone ran it with nuts loose and not only wore off threads but wore away half the metal. The rods I purchased online have good threads but of course they are easy to observe the seam opening.

Thank you!

The side of my rear radius rod at the manufacturing seam (1925) is opening slightly near the fork. Is this sn issue that needs corrected? If so, what do I do to fix it?

Looking for a good set for small drums. How much are you asking. I’ll pay for shipping to Colorado. Can you send overall pics and closeups of both ends, I need good threads. Thank you.

Any rear radius arms for 1925? I need two good ones.

Wanted: used set of rear radius rods for 1925 - in useable condition. Thanks in advance!

Thank you! Now I can’t wait to pull and examine the other three!!

Not supposed to be welded this way, is it?

Windshield decal - there when I purchased.

Curious that one VR can work for 6, 12, and 24 volt systems? I’m no electrical engineer but that just doesn’t sound right to me.

What are these wire springs and where do I get new ones?

Thank you! I guess I’ve been duped! They should not be allowed to advertise “voltage regulator” if it is a cutout. I will buy the ebay version and also set my third brush. Thanks again!

I don’t have the VR yet so I don’t know what the bottom looks like. It should arrive from amazon in the next week. It says R6363 Voltage Regulator - 6 Volt Fits Ford.

I’ve heard that a Voltage Regulator (cutout look alike) is smarter than the original generator cutouts. How is the generator third brush adjusted when a VR is used…or does it even matter?

Want to buy a Magneto Gauge Tool - KRW reproduction. If you aren’t selling one, will you rent one to me?

I will buy one. Thanks!

If you are interested in selling a Model T Ford Magneto Gap Gauge Tool - KRW Reproduction… please message me.

Doing an engine rebuild and found camshaft bearings epoxied in place! Why would this have been done and any recommendations for undoing it?

I’ve got leaks.

Yes, the one that uses the Ford steering wheel and folds up.

Anyone have a used fat man steering wheel bracket they are looking to sell?

Anyone have a used fat man steering wheel bracket they are looking to sell?

Thank you!

I’m in! Please text me at (719) 352-1915. Thank you!

1925 engine

Anyone have main bearing bolts and castle nuts? Or just the castle nuts for sale?

Search found 50 matches