MTFCA Forum

A good friend needs 6 of these for A set of TT wheels he's restoring. Any help would be appreciated, Thanks!

: RICH 1.jpg (41.6 KiB) Viewed 277 times

: RICH 2.jpg (27.53 KiB) Viewed 277 times

please use this email to contact me.

: q3.jpg (11.17 KiB) Viewed 277 times

This is one of the best brands of accessory gas gauges for the Model T. It's for Model T's with a round gas tank. The original acid paper box I got it in crumbed beyond saving. A stock Ford gas tank cap fits this gauge. Asking $135 plus postage. Detroit gas gauge 1.jpg Detroit gas gauge 2.jpg Please...

This set of anti rattlers is close to 100 years old in the original shelf worn box. Asking $75 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 644 times

Here's a nice used set of clamp on slide out running board carrier brackets that are Ideal for carrying auto camping gear or over size cargo. They extend out to 16 inches and are provisioned with eyelets for straps or webbing. The first photo shows them extended with my pants belt (not included) thr...

NEW PRICE $35 PLUS POSTAGE.

: q3.jpg (11.17 KiB) Viewed 439 times

OK, How about $145 (plus Postage) which is only $22 more then just the reproduction lid would cost you being offered by the vendors.

: q3.jpg (11.17 KiB) Viewed 454 times

I got this main piece for The Bull Dog pull from the drivers seat starter that I would consider parting with. http://www.mtfca.com/discus/messages/82 ... 1518364410

This is a nice small spotlight that allows enough space for a drivers side side view mirror to accompany it.. Asking $50 plus postage. Spotlite mini1.jpg spotlite mini 2.jpg spotlite mini 3.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

The box is in good used condition. Coil switch moves freely and has a new reproduction cover face. Asking $175 plus medium flat rate postage. Coil box 1915-17 1.jpg Coil box 1915-17 2.jpg Coil box 1915-17 3.jpg Please use this email address below and NOT the personal messaging system to contact me, ...

SOLD!!!!!!!!!!!!!!!!!!!!

SOLD!!!!!!!!!!!!!!

This is a very nice original condition hard to come by California trailer license plate. Front is excellent back has lite surface rust. I recently sold my Model T era trailer so I no longer need this plate. I am asking $225, plus postage, for the plate which is what I paid for it back in the early 1...

SOLD!!!!!!!!!!!!!!!

NEW PRICE $55 plus postage

NEW PRICE $25 plus postage.

HOW ABOUT $25 PLUS SHIPPING ???

This is a brand new cast brass never used reproduction. These go for $115 from the vendors plus shipping. I am asking $95 plus shipping. License Plate Crank Holder 1.jpg License Plate Crank Holder 2.jpg License Plate Crank Holder 3.jpg License Plate Crank Holder 3.jpg Please use this email address b...

Here are two original brass era cast brake lever pawls with the proper rivet. Asking $25 for the pair plus padded envelope postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

q3.jpg

The spot light is in excellent used condition. Asking $65 plus Postage . reel 1.jpg reel 2.jpg reel 5.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg BTW: Adjusted for inflation, $7.64 in 1920 is equal to $103.88 in 2020.

I have this APCO pressed steel steering column support that will work on your wood firewall That I am asking $50 for. Let me know and I'll hold it.

STILL AVAILABLE.

I originally bought these to go with a set of Riley multi-lifts that I have no longer have. Asking $35 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 478 times

In good usable condition. Spring loaded oilier works fine. Comes with a good used rotor. Asking $35 plus postage. ford script timer1.jpg ford script timer 2.jpg Timer cast iron ford script.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

This is a brand new ford factory early over the axle wishbone perch in mint condition. Asking $40 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 924 times

In great condition. Asking $30 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 501 times

This is a great original period accessory for stiffening the Model T steering column in the earlier Model T's. I have included a photo of the one on my 1915 roadster and it really does a good job of taking the flex out of the steering column. This is in great shape. I am asking $50 plus small flat r...

ASKE accessory intake manifold has a electric glow wire element to help vaporize gas in cold weather. It's in good condition. Asking $75 plus postage. ASKE 1.jpg ASKE 2.jpg ASKE 3.jpg ASKE ad.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

Asking $45 for the lot with FREE SHIPPING!

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 457 times

This is the tool you use to install fastener eyelets on your soft top. It's in mint condition. New repro knock offs of this tool are sell for over $95 plus shipping. I'm asking $45 plus $6 flat rate postage for this original tool. top tool 1.jpg top tool 2.jpg Please use this email address below and...

Here you go Harry. http://www.mtfca.com/discus/messages/11 ... 1287613217

SOLD!!!!!!!!!!!!!

NEW PRICE $25 plus postage

NEW PRICE $100 Plus postage.

NEW PRICE $40 plus postage.

This is a reproduction that the late Max edmunds of the Mother Lode Model T Club had reproduced from an original 40 odd years ago. It's in brand new never used condition with a in-line see through brass sight gauge. The site glass is used in excellent condition and is visible on two sides. Asking $1...

This is a complete coil box that needs new wood and a rebuild. Switch is good and moves freely. Bottom half of the box shows some orange rind. Comes with the coil box key. Asking $60 plus medium flat rate postage. coilbox3.jpg coilbox4.jpg coilbox2.jpg Please use this email address below and NOT the...

NEW PRICE $30 plus medium flat rate postage. This also would be nice for stationary engine setup

In excellent condition in primmer. Asking $35 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 660 times

Great item and well made! Thanks for making these available.

NEW PRICE $65 PLUS $8 postage.

Here's a nice used set of clamp on slide out running board carrier brackets that are Ideal for carrying auto camping gear or over size cargo. They extend out to 16 inches and are provisioned with eyelets for straps or webbing. The first photo shows them extended with my pants belt (not included) thr...

In excellent condition in original box Asking $30 plus $8 small flat rate postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 438 times

One of these is new old stock and one (The black one) is in good used condition but will need the threads chased. The new old stock one has a hole for a oiler and the black one is earlier with no hole for a oiler. Asking $75 plus $8 postage. early perch set 1.jpg early perch set 2.jpg early perch 3....

This is a nice original accessory spring loaded cast iron set of brake rod anti-rattle supports that install in place of the original pressed steel factory supports. Asking $45 plus $8 small flat rate shipping. Brake rod ant rattlers 1.jpg Brake rod ant rattlers 2.jpg Please use this email address b...

Sold to Cliff!

These lock the spring perch nuts and also bond the wishbone to the axle. They are used and one set is usable as is and the other set will need new rod stock pieces bent and threaded. I have only seen these two sets in all my years of collecting Model T accessories. Asking $60 for the lot plus $8 pri...

This is one of the nicest cut out pedals I have ever come across and it's in like new condition. Asking $50 plus $8 priority mail shipping. Cast cut out pedal 1.jpg Cast cut out pedal 2.jpg Cast cut out pedal 3.jpg Please use this email address below and NOT the personal messaging system to contact ...

SOLD!!!!!!!!!!!!!!!!!!!

New price $30 plus postage.

: q3.jpg (11.17 KiB) Viewed 479 times

SOLD!!!!!!!!!!!!!!!!!!

The packet of rivets are missing otherwise this is a excellent set ready to mount. Asking $40 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 647 times

NEW PRICE $130 plus postage.

: q3.jpg (11.17 KiB) Viewed 578 times

SOLD!!!!!!!!!!!!!!!

These two items are hard to find auto camping related items to add to your display. Asking $45 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 724 times

I believe the buyer is going to have these reproduced.

SOLD!!!!!!!!!!!!!!!

This is a brand new never used setup that was reproduced by Max Edmunds of the Motherlode Model T Club back in the 1980's from a original unit. It is complete and ready to bolt on Asking $145 plus postage. FF oiler 1.jpg FF oiler 2.jpg Please use this email address below and NOT the personal messagi...

After many years of collecting Model T accessories this is the only one of these setups I have ever come across. It hooks on to the fender bracket on both sides and the rod holds the frame members tightly together. The brackets are like new and the rod stock is pitted. Asking $75 plus postage. Frame...

NEW PRICE $65 plus postage.

: q3.jpg (11.17 KiB) Viewed 342 times

NEW PRICE $125 plus postage.

: q3.jpg (11.17 KiB) Viewed 468 times

SOLD!!!!!!!!!!!!!!!!!!!!!

SOLD!!!!!!!!!!!!!!!!!!!

SOLD!!!!!!!!!!!!!!!!!!!!

Asking $30 plus postage.

: q3.jpg (11.17 KiB) Viewed 436 times

Please use this email address below and NOT the personal messaging system to contact me.

ASKE accessory intake manifold has a electric glow wire element to help vaporize gas in cold weather. It's in good condition. Asking $85 plus postage.

: ASKE ad.jpg (75.04 KiB) Viewed 473 times

Please use this email address below and NOT the personal messaging system to contact me.

: q3.jpg (11.17 KiB) Viewed 473 times

NEW PRICE $100 plus postage.

: q3.jpg (11.17 KiB) Viewed 682 times

This set of pedal pants has been waiting over ninety years for someone to install them. Asking $35 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 631 times

The transmission cover is cast iron and the engine side receiver is brass and is fitted for a O ring for a good seal to the oil pan. It is in excellent usable condition. The large majority of the other transmission cover outside oiler setups you see are sheet metal like the Ford Faithful units. Aski...

The switch is in great cosmetic working condition. Comes with the key and a brand new brass face plate with it's protective film still on it. Asking $140 plus $8 postage. This is half the price of A new reproduction switch. coilbox switch 3.jpg coilbox switch 1.jpg coilbox switch 2.jpg Please use th...

Looks like this was rebuilt not long ago. It has a new modern float and new inlet and outlet flaps. A good clean up and adjustment should get this running on you car. Asking $75 plus postage. Holley G 1.jpg holley G 2.jpg holley 3.jpg Please use this email address below and NOT the personal messagin...

NEW PRICE $ 70 plus postage.

: q3.jpg (11.17 KiB) Viewed 461 times

SOLD TO UNCLE STAN!!!

This is the only hand pull cut out I have ever seen or come across in my years of collecting Model T accessories. This can be mounted in a number of different locations to hand pull a exhaust whistle or any other device that would use a cut out pedal. Asking $65 plus small flat rate postage. hand pu...

This will need to be gone through and restored. The bowl is brass and has a few small dings on one side. I haven't taken it apart and I don't hear a float when I shake it. This carb. is correct for 1912. Asking $125 plus postage. Hi 4550 1.jpg Hi 4550 2.jpg Hi 4550 3.jpg Please use this email addres...

The clear light is a running light.

This is a brand new old stock unit ready to mount on your T. Comes with the original light bulbs install. Wiring is easy through the removeable inspection cover plate on one side in between the lenses. The original box is not included with the sale. Asking $85 plus $15 priority mail postage. dup1.jp...

THEY SOLD, SORRY!

Thought you might be interested in a original auto campers Tin Can Tourist radiator badge in excellent original condition with great original patina. It measures 3 inches in diameter. It is solid brass sheet with a original lacquer coating. It is the only one of these I have ever seen in years of co...

In good overall condition. It has been restored in the past. Asking $85 plus postage.

: q3.jpg (11.17 KiB) Viewed 379 times

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

This is a brand new complete unit never opened in the original box. The flapper in this unit fits under the transmission door and light's the dash light which stays lite when oil stops splashing on it. The late Ralph Ricks found one of these handy when he ran the Great Race years ago for letting him...

This came to me new in the original crumbling acid paper box. It is the nicest foot feed gas pedal I have ever come across for the Model T. I have included a copy of the installation instructs which you can enlarge and read to learn more about the device. This makes shifting an auxiliary transmissio...

SOLD!!!!! Thank You MTFCA!

This came to me new in the original crumbling acid paper box. It is the nicest foot feed gas pedal I have ever come across for the Model T. I have included a copy of the installation instructs which you can enlarge and read to learn more about the device. Asking $135 plus postage. Speederator 1.jpg ...

This is a good used set of schackle's plus one extra front half side piece(see photos), Asking $125 shipped to your door. Figure eight shackle set 1.jpg Figure eight shackle set 2.jpg Figure eight shackle set 3.jpg Please use this email address below and NOT the personal messaging system to contact ...

Nice set, rare as hens teeth!!

New price $135 plus postage.

Please use this email address below and NOT the personal messaging system to contact me.

: q3.jpg (11.17 KiB) Viewed 418 times

New price $28 with free shipping.

: q3.jpg (11.17 KiB) Viewed 380 times

SOLD TO STAN, THANKS MTFCA

RODGER THAT STAN!

In good condition. Asking $45 plus postage. Kulsa ford ad.jpg Kulsa ford 1.jpg Kulsa ford 2.jpg Here is the patent for the KULS A FORD breather. Patent number: 1529936 Filing date: Apr 27, 1923 Issue date: Mar 17, 1925 http://tinyurl.com/ye6p6as Please use this email address below and NOT the person...

NEW PRICE $70 plus postage.

Please use this email address below and NOT the personal messaging system to contact me.

: q3.jpg (11.17 KiB) Viewed 755 times

The whistle in is good condition and will clean up nicely. Asking $85 plus postage.

Please use this email address below and NOT the personal messaging system to contact me.

: q3.jpg (11.17 KiB) Viewed 877 times

This is a good hardly used plug with excellent electrodes. Asking $35 which includes postage.

Please use this email address below and NOT the personal messaging system to contact me.

: q3.jpg (11.17 KiB) Viewed 536 times

SOLD THANK YOU MTFCA

SOLD! Thank you MTFCA!

SOLD!!!!!!

SOLD!!!!!!

This came to me new in the original crumbling acid paper box. It is the nicest foot feed gas pedal I have ever come across for the Model T. I have included a copy of the installation instructs which you can enlarge and read to learn more about the device. Asking $145 plus postage. Speederator 1.jpg ...

This is a very nice well cared for Model T era tachometer that would be a great addition to a speedster dash. Glass face is 3" in diameter. It has spent many years in one our display cases.The drive spins freely. Era correct low RPM tachometers are very difficult to find especially in such nice cond...

Search found 855 matches