MTFCA Forum

Well guys mystery solved. The noise in the video was indeed the cam gear. While the backlash was within specs (upper limit) it was definitely the culprit of THAT noise. Now for the rod knock type noise. While I was under the car checking rod bearings (they look like new) and pistons for cracked skir...

I will plastigage the rods for bearing clearance. All rods move front and back with light finger pressure. Hard to look up to piston bottom, but I’ll try and report back.

I have checked the plugs, electrodes are all there no damaged plugs. All valve springs are good - none Cracked or collapsed, guess I’ll pull the head and pull the pistons to check all rod bearings and piston pins. Should probably pull the engine. Was hoping to keep it in the car and be able to find ...

The front crank pulley is loose In the video as I had to pull it off in order to remove the cam gear cover to get a good look at the backlash.

You sure would think so. The cam gear has almost no backlash. You can’t move the rods on the crank and #1 rod bearing looks like new. Was wondering if it could be a piston pin bushing? Is there any to tell without pulling the pistons out? The noise does seem to come more from the front rather than t...

Well I’ll pull the main caps and take a look. Thanks for the insight. Hope I find something.

Here is the link to the video of the noise

https://youtu.be/CbIFlaS-pEc?si=k_RdjhvtgwcQvBNb

Hi all, I need help with a strange noise. I thought I had a rod knock this spring but I only hear the noise under acceleration, not coast or declining RPM. I checked #1 rod bearing and it looks perfect. I assume The others are OK, but maybe not. I also noticed that #3 plug has a very white insulator...

Better give me 2. I can pay pal. Send email with your PP info and total. Thanks.

Jim

Need an oil filler cap. Have no idea what happened to mine. Jim

I would do $200 and pick up.

Interested, but need 2. Do you have 2?

Big brake wire

Do you have 2 rear hubs with drums for a 1926?

If still available would you sell the rear hubs/drums?

Would you sell just the rear hubs/drums?

Looking for 2 rear wire wheel hubs for. 1926. Would rather use wire wheel hubs vs. adaptors. These are model T wheels, not model A wheels.

Any rear wire wheel hubs?

Would you do $250 shipped to 49098?

Are these for T wires? And if so are they still available?

Mark, are these still available? Also need rear’s. Jim 847-612-5486

Are these still available?