MTFCA Forum

Thank you Dan T.

HI all .
What is is the thickness of the Transmission clutch discs [25 discs ]

Thank you !!
Toon

What is the max. temperatur of the tar for the capactors ???

Toon

K Burket ;
Thanks for your reaction !!
Toon

From a club member I got a box with model T parts .
One part is a DU MOR Timer .
I have never seen this before .What I am missing is the [rotor ] inside .
Do one of you know what I am missing ???
IF you have a picture then I can make one .
Thanks for your answer .

Toon

Hallo .
One of our Wheels of our 1912 have some spooks who are a little loose .
What is the best way to repair that ???
My spooks appear to be in excellent shape
Thanks for your answer .

Toon

Vincent , On our 1912 We did it the same way as the later ones.
Toon

Allen : here are some pictures of hoe I do the wheels, when they talked to me [ claking]
Toon

A Model T friend of me ,made a tester with a batterie and a led lamp .

Toon

Someone told me ,that you need the magnets to DE Magnetizing before [charging ]
.
How do you do that ,And is it neccessary ???
Thanks for your Answer .
Toon

For some Club members I made chargers .

Toon

To clean the timer I use the following :

And for the roller I use two ball bearings ,till now it works for me
Toon

In the Netherlands we have : Histoparts in Oudega Friesland .
Toon

THANK YOU ALL for your information !!!!
Toon .

Hi all .
I just open an Engine , and see that the Wrist pin bolts are faces away from the Camshaft .
Is that a problem ??
I don't like to change that because , I like to have the Connection rods on the same place as they are now .

Thanks for your Answer .
Toon

For that oil leak , I use a ]DIAPER ] see pictures .
Toon
.

Kevin W .
The plate is : 125 x 50 x 12 mm
The holes are 13 mm , and centre to centre 82 mm .
And the two small plates are : 40 x 25 x 6 mm with a 10 mm hole .
I hope this helps you .

Toon

I use this puller , and works good .
Toon

What do you think about to use Loctite by replacing new pins .

Toon

Tim , The picture of the model T's on Russ's place, is the place where our model T illness start .
Toon

Rich P.
The news paper , must that be all around , or just the cap .
Toon

As Dan says , check your to-in
Toon

Mark G.
Sorry , I was not clear enough.
What I mean is : where are the slits when installing ?
Toon

Hi ;
Some time ago I read on the Forum about the location of the Pistonrings .
But I can't find it back .
I hope you can help me .
Thanks !!
Toon

Craig B ;
All Model T's have the same problem.
You can read that in:
The model T FordOwner The best of Murray Fahnestock
page "304-305
Toon

To : Larry L.
To seal the Crankshaft I use an oilseal and [ glue ] them with JB weld
See the pictures .
Toon

Toon

For years I use this one ;

Toon

Hi Karl ;
I have two sets of seat cutters , but the parts numbers are 20-Z-340
For the O.S valves I made on oversize handel .
Toon .

Barry P.
All Model T's do that , You can read that in :
The Model T owner the best of : Murray Fahnstock
Pag. 303 - 305

Toon

HI ; do one of you us this Ford Tool # 20-Z-340 .
Toon

David W. I do nearly the same with the snout of the starter as you. But sometime I have some problem to line up all the bearings : The brushcap , the bronze bearing , and the new bronze n the snout . Do you have a solution for that ?? Is there a reamer to make all three in line . Thanks for your ans...

What is the best way to clean the inside canals of a NH Carburetor .
Thanks for your answer .
Toon

Leo v. S
Thanks for your EXPLANATION .
Toon

Hallo ,
Why are Negative Cables Braided , And is it neccessary ???
thank for your answer
Toon

Joe ; I mount the switch on the same location as by the later once's .

Toon

EMP ; Please help me ;
What is EMP , I am from an other planet .
Toon

The Forum is crossing the Ocean very fast now Thanks Chris !!!!
Toon

Glay ,I got this from a club member .
When the lamp goes on , then I know that the sec . winding is OK .
Toon

Toon

Ron, I made this one thanks to John Regan !!!!

Toon

To know or your starter is working right ,
The best way is to test them .

Toon

Kerry , You can easy make a voltage Regulator by your self .
With the help of the drawing from John Regan.

Toon

I have good result with These Irons ,
One is original Michelin ,
The other is a reproduction

Toon

George H.
I weld a piece of metal on the bolts

Toon

Thanks for all the information !!!!!
Toon

From a friend I got a Octopus Growler ,he is made in England .
Here in the Netherlands we have 240 Volt AC .
So I like to know or this growler is 110 or 220 [240] Volt .
Thanks for your answer .

Toon

This is what I find :
I don't know or it is a thread like a bolt , or just grooves ?

Toon

Forum is slow again now
Toon

Dallas L,
That plow looks as a : Little Genius # 8 Am I right ???

Toon

All Model T's do that .
Toon

Alan L . I don't have any problem to removing main jets and the seats of the neadles . I heat the NH carb. on the out site with a Acetyleen flame special the surroundings of the main jet and the seat . After that I throw the carb. in water . Then T turnout the parts out with a small screwdriver . I ...

This is my helper with the Hogs Head .
Toon

Luc P. for extra strength , I made an all thread [bolt ] there .
See Pictures .
Toon

Tim J. It looks to me that you need an other flywheel !!!
Toon

The problem with # 1 and # 2 is already in the Book :
The Model T FordOwner by Murray Fahnesstock 1921 .
pag.303-305 .

Toon

Beat ; Clean them on the outside and put them in your T for atleast the next 10 years .
All the best from Holland
Toon

Years ago when the price for a new one was to much for me . I bought a core the same size as the original with three rows of flat tube,s standing in an angle . So the air go's [ swinging ] through the tube's The top and bottem tank I made them by my self . That was much cheaper , but it took some ti...

We use this for years now , Yes I know they are not period looking.
But they work fine .

Toon

I do it this way , no problem with sideways run out .

Toon

We also have a model t with Firestone Polonium Plugs .
How long are they active ???

Toon

We have an engine # 70784 with Metric M 18 plugs .

Toon

To bring the distance of the radiateur bolts to the 21.5 inch centre to centre .
Toon

Robert ; On a Tour in France , I saw this SOLUTION .

I do it the cheap way before a tour.
Just a few drops of oil on the top of the spring .

Dick ;Deze uitdrukking [How Long is a Shina Man ] werd bij ons ook gebruikt .
Groeten uit Holland.
Toon

Max ,I turn down the Support Spools if they are to high .
And always use old plates .

Toon

Jermain:
If you need some Gears who are the same as model T,I have them for you .

Toon

Matt in Call ;
To put the whole Engine together, I use this Engine Stand .
It can rotate 360 degrees .
Toon

Matt , I use this as a Run Engine Stand .

Toon

Rebuilding Rear Axle .

Toon

Mike , the thread of the oil plug is :
3/4 x 24
Toon

Pat Mc.
Some years ago there was a batch of points who where

not good .
I had the same problem [see pictures ]
Toon

To polish our 1912 to do that it take's about a day . And I don't like to do that often. One time a model T-friend told me he has some thing to spray it on . We both use that for four years ago now .After we drove in rain and snow several times, it looks still good. Just a little darker as after pol...

Joshua ; I do it always this way .

Toon

Dick L. Ik denk dat het iets te maken heeft met Mieren .

Toon

Here is what I use .

Toon

From a friend I got some starter switches ,
They are very old , I think atleast 40 year .,but never used .
I am very happy with them .
They are Bosch # 0343200001
Toon

Don H. All Model T's do that , it is the Camshaft go's over center as Dan Mc Eachern 's reaction .
Toon

Robert , Try a spark plug , then you know .
Toon

I made this , Thanks to John Regan !!

Toon

I use this ;

Toon

Scott H . Is this an solution for your bending Rods ???
Toon

I use engine oil, and that works his way between the springs when driving .

Toon

Is it a problem to lube the bearings with grease ?

Toon

I use a switch off a tractor supply store .
Toon

For the next Hunderd year !!!

Toon

Darin H.
I had the same problem with a good Friends Car last month .
See pictures .

Toon

Did you ever seen this Firestone POLONIUM

Toon

For a long time I use an oilseal for the crankshaft,.and glue them to the engine block and timing cover , with JB weld
And also the normal feld style seal .

Thanks to an Forum user .
Toon

Most of the time I heat the Brake Pedal and bent them backwards .
Till he is vertical between the top and bottom of the Pedal .
Toon

I made a mistake !!!!
for seal must be for sale .
Toon

I read somewhere that there is NEW insulated 3/16 strip for seal .
Do one of you know something about that ???
Toon

Hallo ,
I know wich sleeve go's to the out side of the rear axle housing ,
But , wich sleeve go's to the inner side [differentialside] ????

Thanks for your answer .
Toon

To tests Generators I use this .
Toon

To Day , I made this Thanks to John Regan .
Toon

Robert ;
That is normal for a model T .
Look at the Book :THE MODEL T FORD OWNER ,
page 303 - 305 .
Sorry for your Head Gasket and your work .

Toon

I do it a little differed
Toon

I use this , Electric wire

Toon

What is Russ doing with his left arm ???

Toon

I Use this tools .
Toon

Search found 228 matches