MTFCA Forum

Price now $40.00 plus shipping

Still available

These are still available.
Thanks

I am in search of the horn ring that is suppose to be with this steering wheel. I have the complete wheel and fixtures including the bracket that houses the horn ring and mounts to the steering gear box. I have the keys and everything works great. Anybody have a spare horn ring or at least a good ph...

Dennis This is from Bruce's C-D enclyl on factory part numbers. Yours appear to have stamped in numerals along with cast in numerals. The stamped appear to be T-5178 and T-5179. So using his info, the 2nd dates column is "Used On" dates, then these might then be 1915-1921 Top Irons rear seat. Espec...

Dennis This is from Bruce's C-D enclyl on factory part numbers. Yours appear to have stamped in numerals along with cast in numerals. The stamped appear to be T-5178 and T-5179. So using his info, the 2nd dates column is "Used On" dates, then these might then be 1915-1921 Top Irons rear seat. Espec...

Wayne these are Ford brackets but you are somewhat correct. From some research they appear to be for later 21-25 bodied touring (rear pivot) and or roadster with the wood bodies and metal seat frame.
Anybody else know exactly?
Thanks

Hey Dan would that work on small drum AC style brakes.?
I need some to line a set.

Nice straight bracket w good tail light and lens. $40.00 plus shipping

Set of roadster top iron body brackets. Right and left with top nuts. $50.00 plus shipping

Nice set of firewall brackets.
$100 plus Shipping for the set.
Thank you

Here is a nice straight pair of unrestored Jno W Brown Side lights. One broken glass lens and a small pin hole in one oil tank. Correct for 1913 - 1914. $225.00 plus shipping for the pair

Lot of pin type and a few zirk grease fittings and a couple pin type caps. There are a few nos pin type in the bunch. Whole lot $40.00 plus shipping.

Title says it all. Prefer an original set.
Anybody willing to sell??
Dennis

Jerry I believe the hub plates are both 6 inch

I have what I thought were two early front Model T wheels. But there is a difference. One on the right is standard 30x3 and the one on the left is smaller outside dimensions. 2 inches smaller on the rim diameter. Both are wood fellow w / oval spokes. What is the smaller one? IMG_1800.jpeg IMG_1801.j...

Mack I will have several sets of front fender irons.

I will have this for sale at Luray
Mid Atlantic Pre War Swap Meet.
6 days away!!!!

I will have this 23-25 roadster top at Luray

Loading trailer for Luray!!!!

Much much more to load.

We are currently @ 132 vendor spaces sold and more to come.It is going to be a great swap meet. Lots of good Model T Parts and Cars. Plus much much more. The VFW folks are looking forward to everyone coming to vend and visit. They are going to be ready with Breakfast and Lunch each day. See everyone...

Vendor summery list of items that will be at Luray 2025

The 11th annual Luray swap meet is just around the corner. We are on track for another great swap meet. We are currently @ 110 vendor spaces sold. More spaces are still available. Put these dates on your calendar, you won't want to miss it!!!

Tom I am not selling it. I should have posted this on the general forum. Thanks for asking.

Found in a box of Model T parts and accessories I just recently purchased.
Appears to be a horn button that mounts on a slope of some sort. The body with contacts is Bakelite. Anybody seen one of these installed or is it for other make of auto ?

Price now $125.00 shipped

SOLD: Thanks Dave

Very nice 10 tooth ford pinion. $125.00 shipped USA lower 48. These are now listed new at parts supply $285.00
Thank you, Dennis

Here is a very good condition Corcoran Carbide Generator for sale.
$400.00 + shipping or will hold for Mid Atlantic Pre War Swap Meet in May (Luray)

These large wing nut style studs were in with a bunch of T Parts.
Anybody know what there are for. 3/8 course thread steel stud w/ chrome plated brass wing nuts approx. 3 inches overall length.

Hey Craig , I have an original gas line clamp if you need one.

A) swivel is SOLD

A) (SOLD) Model 1913 - 2 1/2 to 1 Stewart right hand swivel —$150 B) Model 1959 - 2 1/2 to 1 Stewart left hand swivel —$150 C) & D) Model 4007 Stewart Clamp Bracket and Bar w/clamp bolt— $40 ea. E) & F) Stewart Clamp Block $20 ea. G) Stewart # 160 Spindle Arm Extension w/Bolt $15 Both swivels turn f...

Thanks Steve and Dan,
I think I am missing a few.
Do you think it is still worth $3.50

I did not know these Timken bearing races where provided in cardboard tubes. An original but tattered example.

Thank you Dan and Jim

Good morning,
I have this dash clock and the key wind is stuck. My question is is this one worth sending to a clock smith for repair and does anyone know any good smiths to do the work. Any suggestions are appreciated.
Thanks

Description says it all. Very good condition. I have not seen many of these anywhere. Asking $400 plus shipping or will hold for Luray swap meet for pickup. Table not included.

Sold pending

KRW Generator Tester for sale made by Hoyt Electrical Instrument Works. Needle moves freely. In very good condition.
$150.00 plus shipping

Hi Andrew , Thank you for asking about Mid Atlantic Pre War Swap Meet ( Luray) . Last year we had 84 vendors and 75 % of those are primarily Model T and Model A Ford. Many Model T parts are available and usually early Ford T parts are there. Brass era car parts are well represented. Usually we have ...

Steve ,
I sent you an email.
Thanks and Merry Christmas

Thanks Richard, looks like you are correct on the brand. Also it appears all three cans are the same size, as seen on the internet.
So anyone have a Monarch co. Brand tank?

“”Long Shot””
I am looking for a matching (thinner)oil can for this set. 9 1/8 inch diameter
Anyone have a spare???
Also missing the mounting bracket. Pictures would be helpful.
I don’t know the brand of this set.

Oh by the way the weather is now looking pretty good for Luray.

I will have a KR Wilson combination machine setup for model T and a KR Wilson rearend stand. Low 17-21 radiator shell nice. 20’s era Side lights and many T era Spark plugs. Plus much more.

Hey Donnie,
Here is the field layout 2023 w/ vendor names.
We set this up at the entrance of the swap meet.
Camping on site is permitted. The VFW is trying to get shower rooms installed on site as well.
Hope this helps.
We are old school

Luray Setup is Thursday May 11@ 3:00 PM
Friday May 12 - 8:00 AM- 5:00 PM
Saturday May 13 - 8:00 AM - 12:00 Noon

All information is on the flyer you can download and print from the website below

www.mapwsm.com

We are nearing 70 vendors and some cool stuff is coming to Luray. I know of a 15 Model T touring , 16 Model T Touring, Model T Snowmobile, Model A speedster, 16 Studebaker , 1907 Thomas Body, early 1910’s Cadillac Parts, Buffalo Wire wheels and hubs, early Chevy parts. Ford Flat head parts. KRWilson...

MTFCI regional Model T tour begins Sunday following the swap meet. 3 days of touring the beautiful Shenandoah Valley. We will be traveling along the Shenandoah River and the Skyline Drive. Visiting Caverns, Civil War Battlefield, covered bridge, car museums, Cooters garage, brewery and much more. Co...

: 562F1FD9-1C71-45A0-B2A8-6D1E14CEEAAD.jpeg (27.76 KiB) Viewed 1380 times

: 799202E0-9631-47CF-B3E4-8BE45C9140CD.jpeg (27.55 KiB) Viewed 1380 times

: 4A83AB11-0A29-4950-83C8-F0921A3E3C63.jpeg (27.11 KiB) Viewed 1380 times

: F5F077FB-CC9A-42D5-AD9C-850F6D308287.jpeg (27.88 KiB) Viewed 1380 times

: 9689E4A5-6C63-4E5E-9C3B-224FE567A565.jpeg (29.18 KiB) Viewed 1380 times

What are these and are they adaptable to Model T ?
Looks like 6:00 x 20 tires

Ed Fuller wrote: ↑
Tue May 24, 2022 6:08 pm
Hey Dennis, neat tank. Love the rivets!

Ed I love it also. Want to put it on a TT chassis and make a water truck out of it.

I'm pretty sure it is T era. I have an old oval truck tank that was Texaco. It has 3 compartments, was painted red, and had round Texaco logos about 8" in diameter. It is pre WWII, and it is welded together. I believe the 3 compartments were for gasoline, (large) kerosene, (medium) and motor oil.(s...

This came from a family that was Texaco dealer for three generations

What would a tank like this been used for and is it of the Model T era?
It has one inlet on top and one outlet on bottom rear. 80 inches long.

I will be bringing a real nice teacup long nose 13/14 engine pan that is pan jig straight. A complete early 12 rivet rear end with two piece driveshaft and early cast end radius rods. 2 good used 13/14 radiators that would get a little warm on a long pull. Both hold water. Numerous other small items.

D16DC14B-8CBF-4252-A5AE-1B6F335BF7AA.jpeg EF8E608C-DA54-400A-A36E-486957E22F48.jpeg This was the first time I had sold a part and was ask if it would be a problem if I could deliver it to the airport and have it picked up. This is Luray airport Luray VA and the gentleman that bought the pan had a f...

Here is a scanned copy( as requested by Steve) of the Car with much clearer details .

Steve Jelf wrote: ↑
Wed Mar 16, 2022 11:33 pm
file.png
Here's the other one blown up. What is the thing between the front wheel and the edge of the picture?

Steve , I think the sidelights and headlights are covered in canvas bags.

Thanks to all the great response. It is much appreciated!!!

Steve I do not have the actual photo. It was sent to me via text and ask if I knew what it was.
I have had two say that it was a Cadillac model 30 .

Would like to know what make and model is of this car.
Thanks

I have these two brass bowls and they are 3 inch diameter. The NH bowls are 2 7/8 inch diameter. The one has a 1 inch center hole and the other has a 1/2 inch center hole. I am interested I learning what they fit.

Bryan I sent you a couple emails yesterday. Did you receive them?

Bryan, I sent you an email about the 13 tooth I have listed on the classifieds parts.

My engine stand

: 302E66AF-FD01-48C8-82E0-9C028DA49752.jpeg (33.1 KiB) Viewed 4570 times

: 2D8E9747-A6DB-4E48-A1D9-A1E4136F9EDC.jpeg (29.71 KiB) Viewed 4570 times

: 5D5A45A7-3895-4869-A650-8D334A3033D3.jpeg (30.74 KiB) Viewed 4570 times

Jonah , would these be yours? 877D9303-44CF-4155-A4CA-7CB023C1DE0A.jpeg There was a pile left and I could not discard this. The magazines I gave to someone else and the Speedo was not much good as it was the pot metal gears and was all swelled up. I think that went on the scrap wagon. I have a big b...

We are nearing 60 vendors and I think we will have a great meet.
Looking forward to it!!!

I will be looking for a good set of early AC style small drum brakes.

This will be at Luray if not sold before. Asking $15000.00. Can also be picked up at Luray Swap meet if needed.

This car is listed in the classified section with more description.
Contact me if interested or want to arrange to see it.
540-860-1384

Hey Tom I think I have one that says passenger on it.

I haven’t received mine yet

Are these useable for engine Babbitt ?

Thanks , Mark,Jay, Dan,Jim, & Frank for all the information and help. I do not think I will ever use the key cutter. Is there any interest in this? Dan Hatch and Chris B. I could have set it on this one for display😏 5E034752-C115-4F11-A407-070D3C46F12D.jpeg and used that table for my fat pine kindli...

Does anyone know what Ford models this KR Wilson key cutter would work for? I don’t think it was used for T. Also is there a code book for the use of this machine. I have several plates with indexing # according to key manufacturer. Any help or advice would be appreciated. 1F5F8E6E-ACD0-4269-B342-5E...

I did not take any other picture. Basically it is a block of steel with that threaded screw through the middle. The screw is about 3/4 inch diameter. The steel is about 3 inches x 11/2 x 1 inch thick. The screw is about 3-4 inch long with a bevel cup on the end. I can’t figure how it can pull a perc...

Anybody know what this is for?

John, This steering box was on the car when I bought it. This car is accessorized to the hilt. It was owned from new by a woman in central PA. She had to this stuff put on the car early on by the dealer AJ List in Tyrone PA. As you can see on the link above there is a lot of the accessories shown. A...

here is the one on my 1923 center door

I sent you an email Mike

Larry,
There is nothing stamped on the riser nor any numbers and or letters stamped in the wooden front cross member under the seat. As I had mentioned to you some of this was replaced years ago and I think the numbers were lost to history.

Jonah it was a pleasure being your neighbor at the Mid Atlantic Pre War Swap Meet. Hope to see you and your family in May at the next Luray meet.

Hi Richard,
Due to the logistics and the size of this meet we will not have our manned consignment table at this special event. We will consider it for our regular spring meet in May.
Thanks for asking

For now it looks like we are in for some fantastic fall weather here in Luray. Looking forward to seeing everyone. I will have a good assortment of Model T Parts. Windshields, engine blocks , transmission parts, wheels, gas tanks, front end and rearend parts. Some TT stuff and a 26 coupe. 0FC8F341-5...

I have a generator that pegs the amp meter while running fast idle and after a few minutes run time the commutator starts to get hot and smoke. Took the brush cover off and while running there are sparks running around the commutator from the brushes. Wiring is correct and when a load is put on ,the...

I think these wrenches are cast steel and a supplier used an existing wrench as a pattern which has left what is called a ghost mark in the sand mold. The supplier probably was required to use the current approved logo. You find this in cast iron skillets from time to time when a new foundry would t...

Long range weather forecast is looking pretty decent right now

You got it!!

Who can guess the purpose of this accessory? I know because I found it in its intended spot on a Model T Ford. It is made of brass and felt lined.

Had a call today that a gentleman is bringing a barn fresh Dec 1910 touring to the Mid Atlantic Pre War Swap Meet In October for sale. Can’t wait to see it.

I have a friend that I think is coming that has a 26-27 gas tank for sale.

If you are using antique tags provided by the DMV you are required to display front and rear. One exception to this is if you register to Year of Manufacture plates you are only required to display as provided in that year. Some early years it think 1914 and earlier may have only had one rear plate.

Richard,
If I were you I would attend Tuesday morning as that will be your best bet to see the most stuff.
I have not had any vendors say they would be here late.
Thank you and hope to see you at the meet

Hi Jonah, The Mid Atlantic Pre War Swap Meet here in Luray is normally held in the middle of May each year. Do to the fact that Hershey has been cancelled this year we believe we can safely hold a meet during the same week. This is a one time fall event. We will resume the spring meet next May and h...

Empty 22 ft enclosed trailer heading to Colorado this coming weekend. Anyone need to move a car anywhere between VA and CO.
PM me if interested. Reasonable costs.
Thank you ,
Dennis

I posted on the Model T Ford Club of Facebook a while back about an engine stand I built from a Model T rear differential. Things I have found out. I can rotate the engine and transmission w/ pan 360 degrees. I can not rotate all the way around with the hogshead or the crank handle in place. The wei...

If the wishbone orientation is incorrect and not installed correctly then the answer to the tittle and question of this thread is absolutely YES!!
The gap between the drag link and wishbone is far less worrisome period!
Please be safe.

Plus the wishbone looks to be installed upside down. If it is ,flipping it would change the gap on the drag link and set the proper caster on the spindles. It appears the spindles are straight up and down or slightly leaning forward on top. Just something to think about.

Tuesday through Thursday seems like an odd choice of dates, but that's what their website says. Hi Mike, our club has decided on the mid week dates because of several factors. Fall Carlisle swap meet ends on Oct 4 and normally many of the vendors would migrate to Hershey the following week. Hershey...

Search found 133 matches