MTFCA Forum

I haven't heard anything from Richard Wolfe who was living in Florida. Anyone heard from him, he used to be a regular poster.

Just received my set from Ross, very happy with their work. Took about 4 weeks. Egge not doing anymore.

I ran my speedster with a 23 radiator for many miles without any heating problems. I recently changed the front end and radiator to a 14 brass, which was suppose to be new. After about 6 miles it started to get hot and boil. I have not changed any timing or anything else that would be related to hea...

Start them young they never forget. I let all young kids play and get acquainted with my cars, most owners make the kids get back and don"t touch. Why would a child want to get involved if they are told stay away?

I have used Bill, he is a honest straight up Christian man, I don't think you will find anyone better trust your prized "T" too.

After adjusting the fingers two times I finally got high gear and a good neutral.
Thanks to all for you help. Sam

It was not the spring after all. I had to adjust the
fingers twice and finally got a high gear and good neutral. Thanks guys for your time and info.
Sam

Has anyone replace transmission spring without pulling the engine. I have heard you can pull the rear end, would the hogs head have to be removed? If you have done this I would sure like your opinion, pull the engine or not. Thanks Sam

Jerry, Dan and George, none of the clutch linkage had been touched since car was built. I pulled the inspection plate on transmission and on further inspection found there is a space between the first two spring rings and the third about 1 inch apart. I don't think that is correct? If the spring is ...

The car I just bought had been setting for 20 some years, when it went into a museum status it had a fresh engine and transmission, I am led to believe that the brake lever was left in the down mode in high gear which I think could have caused the clutch disc to stick together? After starting the ca...

When you have a good experience with vendors I think it should be shared. This past week I had my Mercury Body Speedster delivered to the MTFCA Museum by Bill Squires of Bill's Auto Works, never had a better hauler that was on time to the minute and went out of his way big time to meet my demands. A...

I love having the book in my hand, if it would cost a little more to continue this I would be all for it. It is a bargain at the price the best of
publications. My opinion. Thanks MTFCA for a fine rag.

Bill just waiting for a confirmed date on my Mercury transport from Ct.
Sam

I really don"t care about the gallery or what they think, this is my car bought and paid for buy me not anyone else. That is what is so cool about a T, you can do what you want and enjoy it. I do have cars that are political correct but this project is a speedster so it does not matter. Thanks to al...

Thanks Rich that is what I was looking for. I think I will have to change the fan also, it hits the upper hose connector.

I have the hood and former and firewall correct, would a low head be the difference in the space between the two hose connections.

I have the hood and former and firewall correct, would a low head be the difference in the space between the two hose connections.

I would like to put a 14 radiator on a 23 frame, has anyone done this or can
it be done? Hose connections upper ,not line up, fan to large what is different
on the frames. Thanks

If it was a 15 engine it would have to be cranked? water pump or water cooled? lol, where did exhaust exit. This will have to be researched but very interesting to say the least. Thanks Sam

Will there be a homecoming this year? If so what are the dates.