MTFCA Forum

tman12

Tracy: Hi From Iowa! I'm just curious as to why you do not respond to my fair offer to accept your $400 asking price? Thanks John

tman12

Hi From Iowa! Out of consideration for you, as you are evidently not familier with how this site works, I will extend my offer to meet your asking price of $400. It is the magneto & drive that I would like to use on a speedster, but there is no way of telling their condition with out disassembly and...

tman12

Hi From Iowa: Just what I need for my '09 if available? Thanks john

tman12

Mark: Hi From Iowa1 I sure could use one of the chasers as well if available? Thanks John

tman12

Hi From Iowa! The mag & drive are the main things of value on the project that I noticed & what I why I was willing to pay the asking price. There is not much more there to add much higher value, but normally when you list something & post your price that is it? I have bought & sold many parts on th...

tman12

A real mystery? I have sent a PM & posted here with no response either. Normally when someone posts a part and a price that is how we know what is out there & can make a purchase like I have done many times! I'm not sure what is going on, but I am interested & would like to hear back from the seller...

tman12

Hi From Iowa: I am interested in your engine & said that I would purchase for your asking price & would also pick up at your location. Do we have a deal or is there something else going on here? Thanks John

tman12

I sent you a PM as I would like to purchase the T engine & would pick it up there. Thanks John

tman12

Hi From Iowa! I would love one of the speedow brackets if available? Thanks John

tman12

Did you ever find a WR Head? If not I have an ex one I would part with! Thanks John

tman12

Hi From Iowa: I have a mint Waukashaw0- Ricardo head. I bought it for a speedster, ran into a Fronti OHV that I have decided to use instead. I would sell for my investment of $600 it is ready to go to a new home. Thanks John

tman12

Hi To All Model Ters From Iowa! I am again looking for members vast knowledge! I have a KR Wilson axle repair stand & would like to find out what color to paint it? It is rusty & ugly & could do with a little refreshing! Thanks John

tman12

I have all your goodies & would love to learn how to use them! Count Me In - John

tman12

How about the Oil Lev guage? Thanks John

tman12

Hi From Iowa! Just a comment - I got some very nice Friction shocks from Speedway a couple of years ago for one of my Speedsters . They are not orig Hartfords, but they were very reasonable & 6they work! Thanks John

tman12

Hi From Iowa! Many Many Heartfelt Thanks To Your Whole Family For Everything you Have Done For our Ole Car Hobby! john

tman12

Bob: I sent you a e-mail for 4. Thanks John

tman12

They Look Good to Me , but you need to consider some wild color for the wheels!?

tman12

RV: Wow That Is More Than Awesome! Good Job!

tman12

You are right about the many versions! I have the cans for my big ole Hudson, but they are larger than the set I have on my T! I will try to copy the sall set & make it big enough to accept the larger cans? Thanks John

tman12

Hi To Everyone - From Iowa Winter! Dumb Question! What is the story behind these rods & is there any advantage to them over the late lighter style H rod? Thanks John

tman12

Roger: Hi From Thawing In Iowa! I could sure use a couple of lbs if available? Thanks John

tman12

Bill: Hi From Iowa! I'm just curious as to what you need the 35x5 tires for? My big ole '19 Hudson uses this size & I could use a demountable Kelsey rim if I can locate one! Thanks John

tman12

Scott: Hi From Iowa! Since I already have 2 of your nice valves I guess you can put me down for one of the tools! No Hurry - John

tman12

Hank: I would like to purchase the wrench! I tried your e-mail & did not get through? Thanks John

tman12

Stan: Hi From Cold In Iowa! As always your work not only looks great, but works as well! Thanks For Sharing with us ole car enthusiasts Who Do Not Have Your Talent! John

tman12

Dave: Hi From Iowa - Shueyville! I could use the '11 plate if available? Thanks John

tman12

Hi From Iowa! I too would love to get a copy - if possible? Thanks John

tman12

Mike: Thoughts & Prayers Headed Your Way From Iowa! John

tman12

Walt: Hi From Iowa: I could use the shutoff if available? Thanks John

tman12

Joe! Hi From Iowa! I could use the B carb if available? Thanks John

tman12

Tim: Hi From Iowa! my records show I paid $128 - did I overpay? It is a very nice unit! Thanks John

tman12

Hi From Iowa! I would like to purchase the fronti stuff? Thanks John

tman12

Bill! That is an awesome unit! It would really make my ole A GO! I will take a look at Hershey! Thanks John

tman12

Hi From Iowa! Do you need both 1/2s? I may have some nos parts if no-one else finds any! Thanks John

tman12

Hi From Iowa! I would love to see the list as well! Thanks John mtrcarmn@southslope.net

tman12

Tim: Hi From Iowa! I could use the dist if available? Thanks John

tman12

Hi From Iowa! the Phelps wheels I have are cen lock & dental drive requiring a spec Phelps hub. Your wheel looks to me like a front that would go right onto the spindle. I'm not an expert - only an enthusiast who like wires! John

tman12

Tim: Hi From Iowa! I could use the oil lev unit if available? Thanks John

tman12

Hi From Iowa! Thanks Again To All you Great Model Ters! You have provided the Exact Info I needed To understand How to go about installing the left side shifter!!! John

tman12

Hi From Hot In Iowa! I purchased a new left side Ruxtel shifter from one of the major suppliers last year and today when I unpacked to put it on my T I found that they had forgotten to supply an instruction sheet to at least give suggestions as to how to install it! I just can't make sense as to whe...

tman12

Many Thanks to all you Great Guys & your Good suggestions - This the Best Group Of People Always willing to Help Us T Lovers With our problems! John

tman12

I have contacted all the main suppliers & the man that made the new cam bearings has had problems with the foundery that supplied the blanks & cannot supply at this time. I need to find someone with an extra set or maybe someone else is now making them? HELP John - PS Glen C is the one who told me t...

tman12

Hi From Iowa: I started to install my new 280 cam & found that I have the wrong frt cam bearing that is not available from main suppliers? At Lincoln last week I was told there may be a new supplier? Des anyone know the scoop & contact? I have also forgotten where to get some red rubber hose for the...

tman12

Keith: Hi From Iowa! If possible I would like to get a paper pattern to make a boot for my early '12 touring (2piece dash car)? I would be glad to buy this of course. Many Thanks John

tman12

I had a set of 25' rims made for my '19 Hudson - best supplier I could find- had to wait a few months for run - were great to work with - the rims are awesome & worth the wait!! Vintage Rims is the way to go! My Opinion John

tman12

How wide is it? I need some brake band lining for my Essex! Thanks John

tman12

Hi To All From Iowa! I tried to get hubs from Alex a long time ago & he evidently decided to give up the project after he finished his set? He did kindly offer to help me if I decided to build my own. There was someone in CA that made excellent new caps years ago as I have 2 sets that came from Ut o...

tman12

A Warning about the use of this type wheel. I am not trying to be a smarty & am not an expert in the field, but as I understand it this type of wheel was designed to be supported at the outer hub (with the center lock cap) as well as the inside! If they are used as someone modified them they will pu...

tman12

Hi From Iowa! I could use the side light brackets if available? Thanks John

tman12

Rick: Hi From Iowa! I could use this bracket if available? Thanks John

tman12

Rick: Hi From Iowa! I could use your patterns if available? Thanks John

tman12

Hi From Iowa: I could use the C peddle 7 shaft if available? Thanks John

tman12

Jay: Hi From Iowa! I would like the Win ball if available? Thanks John

tman12

Rick: Hi From Iowa! I would like 15 of each as well> Thanks John

tman12

Hank: Hi Again From Iowa! I could use the gr fittings if available? Thanks John

tman12

Larry: Hi From Iowa! I could use the tach if available? John

tman12

Hi From Iowa: Thanks to all who have taken the time to respond to my powder coat ? This is an awesome group to help each other out! Many Thanks John

tman12

Tim: Hi From Winter In Iowa! I could use the manuals if available? Thanks John

tman12

Hi Everyone - From Winter in Iowa! I need your help & advise on whether I should powder coat my wire wheels? I am thinking of having my wire wheels powder coated for looks & durability! I was on A T tour years ago where one of the Ts spun the stems off of two tier tubes (30x3 1/2). The rims had been...

tman12

Dan: Hi From Iowa! If the SL brackets are still available I could use them? Thanks John

tman12

Jay: Hi From Iowa! If this horn is still available I would purchase it for $75? Thanks John

tman12

John: Hi From Ice In Iowa! I could use the caps if available? Thanks John

tman12

Adam: Hi From Blizzard Recovery In Iowa! I could sure use the lid for '14 coil box if available? Thanks John

tman12

Hi From A Blizzard In Iowa! If the lights are still available I could use them on my Speedster? Thanks John

tman12

Hi From Iowa! Thanks for getting back. I would like to send you payment in the mail - if that is OK? What is the total? & where do I send it? Thanks John (mtrcarmn@southslope.net)

tman12

Stan: Hi From Snowy Iowa! Thanks I will send my UJ to you ASAP! John

tman12

Hi From Iowa! I would like 1 brass & 1 chrome if available? Thanks John

tman12

Larry: Hi From Iowa! I cannot find your PM? Thanks John

tman12

Larry: Hi From Iowa! I cannot find your PM? Thanks John

tman12

Larry: Hi From Iowa! I could use the caps if available? John

tman12

Larry: Hi From Iowa! I would love the lis plate If available? Thanks John

tman12

Stan: Hi From Now Snowy In Iowa! I hope your winter is going OK for you? With the weather reprieve we finally finished the harvest on Jan 4 about 6 weeks later than we like! I'm sorry I am so terrible about getting things done, but will you still redo my UJ I have talked to you about - but not gotte...

Search found 73 matches