Classifieds - Parts - Page 105

Classifieds - Parts

New Topic

10734 topics

Page 105 of 108
- Jump to page:
Previous
1
…
103
104
105
106
107
108
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

86362 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS ruxtell shifter for tt

Last post by T Cruiser « Sun Nov 13, 2022 11:01 am
Replies: 2
by T Cruiser » Sat Nov 12, 2022 8:45 pm

First post

Used shifter. No broken worn out parts. The lever and spring are rust pitted,and a better one included. $40.00 plus $17.05 shipping in cont. US. Call Ted at 503-728-3476

Last post

Sold thank you

2 Replies

1165 Views

Last post by T Cruiser
Sun Nov 13, 2022 11:01 am
WTB open car mirror

Last post by CudaMan « Sun Nov 13, 2022 9:44 am
Replies: 11
by sweet23 » Sun Nov 06, 2022 9:28 pm

First post

Want to buy an original open car mirror for my '25 roadster. Does not have to have the glass, but frame must be restorable. Darryl

Last post

Congratulations Darryl and Allan!

If anyone else has a mirror frame like that, I could use one for my 1912 Flanders. :)

11 Replies

2645 Views

Last post by CudaMan
Sun Nov 13, 2022 9:44 am
Wanted: Backrest Seat Springs for 1925 Roadster.

Last post by Allan « Sat Nov 12, 2022 11:32 pm
Replies: 1
by RonGlowczewski » Sat Nov 12, 2022 10:41 pm

First post

Looking for an original set, see photo below. It is 3 rows of 8 springs.

1925 backrest springs.png

Last post

Ron, there is no substitute for a good set of seat springs. There is no-one better placed to provide a new seat back spring assembly than Snyders The started their business supplying seat spring assemblies.

Allan from down under

1 Replies

700 Views

Last post by Allan
Sat Nov 12, 2022 11:32 pm
Kingston L4 and a simmo.ns body FS

Last post by ModelT46 « Sat Nov 12, 2022 9:01 pm
Replies: 1
by ModelT46 » Sat Nov 12, 2022 12:40 pm

First post

An early Kingston L4 with brass body. Unrestored as found. $150 plus the ride. A simmons straight through body only as found. $75 plus the ride.

Last post

Open to offers.

1 Replies

851 Views

Last post by ModelT46
Sat Nov 12, 2022 9:01 pm
Wanted: Usable/Repairable High Radiator

Last post by Mr. T Ford « Sat Nov 12, 2022 6:38 pm
Replies: 4
by Papa » Fri Jun 24, 2022 11:58 am

First post

Looking for a high radiator for a non restored '27 T. Any condition other than junk is fine. I will pay for shipping or pick up if possible. Thanks

Last post

Have 26-27 Honey cone radiator for sale if interested

4 Replies

2112 Views

Last post by Mr. T Ford
Sat Nov 12, 2022 6:38 pm
WTB: Front Axle

Last post by Mr. T Ford « Sat Nov 12, 2022 6:26 pm
Replies: 6
by Stephen_heatherly » Wed Sep 21, 2022 10:09 pm

First post

Looking for a friend

WANTED

Model T Friends,

I am looking for a *VERY NICE* front axle for a Model T Ford,

I am aware of the differences through the years, but the majority of the ones out there that are available in *nice condition* will be the 1914 to 1927 style TW or FORD (Non Dodge Brothers) it will be going on a speedster so it is not...

Last post

Have axels assembles,
If interested I am in Ct

6 Replies

2238 Views

Last post by Mr. T Ford
Sat Nov 12, 2022 6:26 pm
For Sale: Thinning Out My Collection !

Last post by RajoRacer « Sat Nov 12, 2022 1:44 pm
Replies: 28
by RajoRacer » Sun Oct 16, 2022 3:40 pm

First post

Here's a couple photos of ONE of my walls with Model T goodies - drop me a note regarding anything that you might like to have EXCEPT the Stevens, Ford wrenches & tools - I'm negotiable for the most part ! Drop me a note through the Forum, please unless you already have my email.

Updated photos - red circles not available.

Last post

How true Richard !

I sent you an email Stephen - no reply ?

28 Replies

7138 Views

Last post by RajoRacer
Sat Nov 12, 2022 1:44 pm
Radius rod to pan bracket NOS

Last post by AZTerry « Sat Nov 12, 2022 1:39 pm
Replies: 3
by elliott1936 » Fri Nov 11, 2022 4:23 pm

First post

I have three new old stock front radius rod to pan brackets. I think they are for the three dip pan and I'm not sure which is which. If you need one, I bet you can tell me which is which. All three are for sale Two of one kind and one other. $30.00 each plus flat rare postage. Tom five 03-644-937four
Take a look and tell me which is which.

Last post

sent email

3 Replies

1322 Views

Last post by AZTerry
Sat Nov 12, 2022 1:39 pm
WTB: Enclosed Trailer....

Last post by TRDxB2 « Sat Nov 12, 2022 12:55 pm
Replies: 3
by George House » Thu Nov 10, 2022 8:39 am

First post

....capable of transporting TT C Cab or centerdoor. So, need extra height. Please help....
gwhouse731(at)gmail(dot)com

Last post

Not much of fan of Facebook either but took a look in your area - 50 miles around Lockhart, TX - Facebook miles are often wrong
Not sure about the length or height of TT C cab. I can search Facebook email me your city and I'll send some pictures back to you. Sent you an email

3 Replies

1437 Views

Last post by TRDxB2
Sat Nov 12, 2022 12:55 pm
SOLD FS Auxiliary oiler and foot. New price $35

Last post by ModelTWoods « Sat Nov 12, 2022 11:39 am
Replies: 2
by RGould1910 » Tue Nov 08, 2022 8:40 am

First post

After market period oiler and foot, $35.00 plus actual shipping.
20221107_153045.jpg 20221107_153030.jpg

Last post

Richard, I'll take it. if not already sold. Contact me by email through this site. Tell me if you have a Paypal account and details, or how you want paid.

2 Replies

1132 Views

Last post by ModelTWoods
Sat Nov 12, 2022 11:39 am
Found!-Stromberg Type B Carb

Last post by Mark Gregush « Sat Nov 12, 2022 11:31 am
Replies: 13
by Tadpole » Mon Nov 07, 2022 7:34 pm

Looking for a usable Stromberg Type B updraft
No need for a fancy, polished carb, going on an old original.

13 Replies

2325 Views

Last post by Mark Gregush
Sat Nov 12, 2022 11:31 am
FS Early front motor mount, lamp burners, New prices $50

Last post by RGould1910 « Sat Nov 12, 2022 11:17 am
Replies: 1
by RGould1910 » Tue Nov 08, 2022 8:17 am

First post

Front motor mount for an early T. Good threads. Complete.
$50.00 plus actual shipping. Working lamp burners. Paint the bonnets silver or use as is. $50.00 plus actual shipping. Payment by check or PayPal, feiends.
20221107_152238.jpg 20221107_151953.jpg 20221107_174300.jpg

Last post

Move to the top

1 Replies

888 Views

Last post by RGould1910
Sat Nov 12, 2022 11:17 am
FS Early firewall brackets. New price $70

Last post by RGould1910 « Sat Nov 12, 2022 11:17 am
Replies: 1
by RGould1910 » Tue Nov 08, 2022 8:33 am

First post

Matched pair. $70.00 plus actual shipping.
20221107_154801.jpg 20221107_154846.jpg

Last post

Move to the top

1 Replies

854 Views

Last post by RGould1910
Sat Nov 12, 2022 11:17 am
FS Kingston 4 ball carburetor, New price $250

Last post by RGould1910 « Sat Nov 12, 2022 11:14 am
Replies: 1
by RGould1910 » Wed Nov 09, 2022 1:48 pm

First post

Overall very good unrestored condition. Ajdustment knob, petcock and float need to be repaired or replaced. Very good internals, threads, ,cosmetics. Price $250 plus $27.05 shipping. Contact me by private email
Richard Gould
20221109_103648.jpg
20221109_100744.jpg 20221109_100711.jpg
l 20221109_100655.jpg

Last post

Move to the top

1 Replies

805 Views

Last post by RGould1910
Sat Nov 12, 2022 11:14 am
SOLD Exhaust deflector

Last post by RGould1910 « Sat Nov 12, 2022 11:11 am
Replies: 2
by RGould1910 » Fri Nov 11, 2022 6:52 pm

First post

Came off a 1927 T roadster I purchased years ago. Believed to be a period aftermarket piece. Price $35.00 plus $9.50 Priority shipping.
20221111_150902.jpg 20221111_150909.jpg

Last post

Email sent

2 Replies

997 Views

Last post by RGould1910
Sat Nov 12, 2022 11:11 am
WTB - Single White Wall

Last post by MadMax « Sat Nov 12, 2022 9:47 am
Replies: 4
by MadMax » Mon May 09, 2022 6:11 pm

First post

Howdy all! I’m looking for a single whitewall tire for the rear wheel of a ‘15 touring.

I will be at Luray if someone has one. Drop me a note.

Sorry for the vague details as it got me that I wanted to do this and forgot… and I’m on a plane and heading out of town for a couple days. I can’t check the size but it is a standard size rear wheel.

Last post

Howdy all,

Sorry for the delay in getting back with you regarding the whitewall tire from back in May. Between travel for work, prepping for the Wisconsin tour, and trying to fix the car as a result of the Wisconsin tour (ha ha ha), I lost track of this post.

I dropped an email to Ed, but figured I'd repost on here.

Joe, do you have one?

4 Replies

1857 Views

Last post by MadMax
Sat Nov 12, 2022 9:47 am
For sale reversed eye front and rear main leaf spring

Last post by Model T Mark « Sat Nov 12, 2022 9:12 am
Replies: 3
by Model T Mark » Fri Nov 11, 2022 7:42 pm

First post

Built for speedster by Travis Cook one rear reversed eye main leaf and one reversed eye main front leaf. In epoxy primer new never used. Decided to lower the chassis an alternate way. 100.00 each plus actually shipping. Mark Eyre

Last post

Ken my email is meyre14t@yahoo.com

Send me your zip code and I’ll get a shipping est Monday.

3 Replies

1455 Views

Last post by Model T Mark
Sat Nov 12, 2022 9:12 am
Early Atwater Kent front plate distributor

Last post by Dan McEachern « Fri Nov 11, 2022 11:45 pm
Replies: 13
by Bruce Compton » Fri Oct 25, 2019 5:07 pm

First post

Atwater Kent front plate distributor for Model T without a generator. Looks like it was never used except for a chip out of the cap. . Asking $450.00 plus shipping.

Last post

I have the gear sets available for these and the LA distributors if anyone needs them.
dmcgearsatyahoodotcom

13 Replies

6139 Views

Last post by Dan McEachern
Fri Nov 11, 2022 11:45 pm
1927 coupe\sedan A pillar body hinges

Last post by micshotrodgarage « Fri Nov 11, 2022 8:55 pm

by micshotrodgarage » Fri Nov 11, 2022 8:55 pm

I have a real nice set six pieces hinges for a 26\27 coupe or sedan, they are for the A pillar body. Would fit Model A pickup as well. $150 for the set. Will add photo or can send out to E mail. Or # 970-527-8005 Mike

0 Replies

888 Views

Last post by micshotrodgarage
Fri Nov 11, 2022 8:55 pm
model A hub

Last post by Melba Nolan « Fri Nov 11, 2022 8:51 pm
Replies: 2
by Melba Nolan » Sat Sep 24, 2022 7:20 pm

First post

For sale: model A front hub with bolts. $125 plus postage
20220924_175826.jpg 20220924_175839.jpg

Last post

reduced price $100 plus postage

2 Replies

1103 Views

Last post by Melba Nolan
Fri Nov 11, 2022 8:51 pm
SOLD Apco oil guage

Last post by Scott_Conger « Fri Nov 11, 2022 8:19 pm
Replies: 2
by RGould1910 » Fri Nov 11, 2022 6:26 pm

First post

Good condition, original paint. Price 45.00 plus 9.50 Prioriy shipping.
20221111_150949.jpg 20221111_150936.jpg

Last post

Ed

be aware that that thing came with an upper support bracket and needs to be found or made!

nice buy

2 Replies

936 Views

Last post by Scott_Conger
Fri Nov 11, 2022 8:19 pm
SOLD 1909-10 Kingston 5 ball carburetor air horn.

Last post by RGould1910 « Fri Nov 11, 2022 6:43 pm

by RGould1910 » Fri Nov 11, 2022 6:43 pm

Price $85 plus $9.50 Priority shipping.
20221111_150844.jpg 20221111_150833.jpg 20221111_150826.jpg

0 Replies

767 Views

Last post by RGould1910
Fri Nov 11, 2022 6:43 pm
Accessory Water Neck Adaptor OHV

Last post by ThreePedalTapDancer « Fri Nov 11, 2022 5:39 pm

by ThreePedalTapDancer » Fri Nov 11, 2022 5:39 pm

This water neck Adaptor was stored with some misc OHV speed parts. It is marked J91 and measures 2-15/16 between bolt hole centers. 4 inch tall from base. It is made of heavy cast steel. The center hole is 1-3/4. 80.00 includes shipping.

A81D1E9F-9035-4AF2-B989-85CC77ADAC01.jpeg

0 Replies

814 Views

Last post by ThreePedalTapDancer
Fri Nov 11, 2022 5:39 pm
Frontenac Carburetor Adaptor

Last post by ThreePedalTapDancer « Fri Nov 11, 2022 5:24 pm

by ThreePedalTapDancer » Fri Nov 11, 2022 5:24 pm

This is a carburetor adaptor for a Frontenac OHV? At least that’s what it was written in storage box. The center to center measurements on the bolt holes is appx 2-11/16. The center hole is 1-7/16 appx. Has number FC1110 cast into it. It is made of cast iron, ready to use. 75.00 includes shipping.

02AA2EF8-8C82-43AC-ABA7-4D567CEF8DCC.jpeg...

0 Replies

817 Views

Last post by ThreePedalTapDancer
Fri Nov 11, 2022 5:24 pm
Pleasentville Hack body

Last post by doug sanford « Fri Nov 11, 2022 4:37 pm

by doug sanford » Fri Aug 19, 2022 6:05 pm

New Pleasentville Hack body never permanently installed, comes with extra seat, firewall and windshield. Asking $4500.
It sits on a complete 1915 running gear. I also have new front and rear fenders, splash aprons, running boards and used aluminum hood.
Chassis- $2000, Front and rear hack fenders - $340 each, splash aprons - $170/pair, Used hood...

0 Replies

1473 Views

Last post by doug sanford
Fri Nov 11, 2022 4:37 pm
NOS Radius rod support, three dip pan

Last post by Don ellis « Fri Nov 11, 2022 3:32 pm
Replies: 2
by Don ellis » Sat Nov 05, 2022 3:24 pm

First post

NOS Three dip pan wishbone support.
30.00$ plus shipping
Pm me

Last post

Sold pending

2 Replies

1175 Views

Last post by Don ellis
Fri Nov 11, 2022 3:32 pm
Winfield Carburetor Choke Assembly (SOLD)

Last post by ThreePedalTapDancer « Fri Nov 11, 2022 3:20 pm
Replies: 3
by ThreePedalTapDancer » Fri Nov 11, 2022 1:04 pm

First post

Early Winfield choke assembly. Complete with flapper and brass lever. Needs repair of crack on collar, made of aluminum so easy creative welding repair. Hard to find part. 75.00 shipped.

515CB1B6-766C-449D-B168-680B6485D566.jpeg

Last post

No numbers, the male end outside diameter is a tad under 2 inches closer to 1-15/16

3 Replies

1062 Views

Last post by ThreePedalTapDancer
Fri Nov 11, 2022 3:20 pm
FS: Various T parts and accessories

Last post by Nate22huckster « Fri Nov 11, 2022 2:33 pm
Replies: 7
by Nate22huckster » Wed Nov 09, 2022 8:02 pm

First post

For sale:

- vaporizer carburetor $150+ shipping

- T-2710-AS spindle bolt set 09-16, brand new from Snyder’s never used (bought the wrong kit by accident) $55+shipping (Snyder’s price is $66.95 and currently their website shows them temporarily out of stock)

-L.P. Halladay timer elevator $50+shipping

-Model T Ranch part# 1050 modern accessory...

Last post

The vaporizer carburetor is sold pending payment.

7 Replies

2231 Views

Last post by Nate22huckster
Fri Nov 11, 2022 2:33 pm
FREE Splash apron

Last post by Layden Butler « Fri Nov 11, 2022 2:09 pm

by Layden Butler » Fri Nov 11, 2022 2:09 pm

Right side splash apron for 1923-25 sedan. FREE to a good home, pick up only here in Northern California, NO shipping.

0 Replies

854 Views

Last post by Layden Butler
Fri Nov 11, 2022 2:09 pm
Speedster Carburetor Adapter

Last post by ThreePedalTapDancer « Fri Nov 11, 2022 12:22 pm
Replies: 3
by ThreePedalTapDancer » Tue Oct 11, 2022 7:44 pm

First post

Here is a NOS accessory updraft/downdraft swivel carburetor adapter. It allows the adapter to swivel into any angle to allow a variety of updraft or downdraft carburetors. Unused, measures hole to hole appx 2-3/4 to 2-3/16. Made of aluminum with brass center tube. Neat item. 40.00 includes shipping.

711FF669-753B-43D0-9248-A138049AB22F.jpeg

Last post

Email sent

3 Replies

1621 Views

Last post by ThreePedalTapDancer
Fri Nov 11, 2022 12:22 pm
WANTED. Mint Condition Front Axle

Last post by Stephen1915 « Fri Nov 11, 2022 8:39 am

by Stephen1915 » Fri Nov 11, 2022 8:39 am

As the headline states, looking for a mint condition front axle. TW, Ford, DB. All considered. More concerned with quality than correctness. Spindle holes are the exception. Steven’s inserts can be used if need be.

0 Replies

802 Views

Last post by Stephen1915
Fri Nov 11, 2022 8:39 am
12v Converted Model T Starter FS

Last post by AdminJeff « Fri Nov 11, 2022 8:22 am
Replies: 4
by AdminJeff » Thu Oct 20, 2022 9:10 am

First post

I have ONE 12v converted Model T starter for sale that I just finished.

My process is described in gory detail on my new website:

1919-1927 Ford Model T Starter Exchange prices (2022)
12v Starter conversions $500 (new field coils)

New gaskets and woodruff keys included with all rebuilt starters and generators.
Shipping is $25 fully insured....

Last post

I've been at this for a couple years now. Use the search function box! Type 12v starter and you'll find this back 2 years ago.

4 Replies

1300 Views

Last post by AdminJeff
Fri Nov 11, 2022 8:22 am
steering cover

Last post by Melba Nolan « Fri Nov 11, 2022 3:41 am
Replies: 1
by Melba Nolan » Sat Oct 29, 2022 10:36 am

First post

For sale: nickle plated steering cover 17/27 $35 includes shipping
20221028_161503.jpg 20221028_161524.jpg

Last post

move to top

1 Replies

853 Views

Last post by Melba Nolan
Fri Nov 11, 2022 3:41 am
Claxton push horn/parts

Last post by Marty Bufalini « Thu Nov 10, 2022 11:42 pm
Replies: 1
by Angmar » Mon Oct 24, 2022 3:43 pm

First post

Push type horn/parts, as-is $100 plus shipping. Send a PM to me please.

Last post

PM sent
Thanks

1 Replies

1450 Views

Last post by Marty Bufalini
Thu Nov 10, 2022 11:42 pm
1919-1927 Completely Rebuilt Ford Model T Starters With ONE YEAR Warranty!

Last post by AdminJeff « Thu Nov 10, 2022 10:10 pm
Replies: 1
by AdminJeff » Wed Sep 28, 2022 3:15 pm

First post

I just finished 5 more 6v starters and 2 12v starters.
I also have 1 generator with new field coils and a newly rewound armature.

My rebuild process is described in gory detail on my new website:

1919-1927 Ford Model T Starter/GeneratorExchange prices (2022)
Rebuilt Generator: $325 (new field coils)
Rebuilt Generator: $450 (new field...

Last post

I just finished 5 more 6v starters and 2 12v starters.
I also have 1 generator with new field coils and a newly rewound armature.

1 Replies

1452 Views

Last post by AdminJeff
Thu Nov 10, 2022 10:10 pm
For Sale: unknown side curtains

Last post by Will_Vanderburg « Thu Nov 10, 2022 7:57 pm
Replies: 3
by Will_Vanderburg » Sun Nov 06, 2022 2:40 pm

First post

I bought these from a gent at Luray and were told they would fit a 23-25 Model T touring. He said they came from Turlock, CA. There’s no identification on them whatsoever.

They do not fit. I have no clue what they fit. My loss is your gain. They are in really good condition with no cracking.

$200 bucks to your door. US only, please. PM if...

Last post

Bump back up

3 Replies

1214 Views

Last post by Will_Vanderburg
Thu Nov 10, 2022 7:57 pm
Speedster hand air pump and gauge F/S

Last post by Layden Butler « Thu Nov 10, 2022 6:21 pm
Replies: 4
by Layden Butler » Mon Jun 20, 2022 2:09 pm

First post

Hand air pump with T handle for pressurizing a gasoline tank, complete with large nut for instrument panel mounting, works great and has built in check valve, included is a working pressure gauge $235 for both, domestic shipping $15.

Last post

Special price, $199 for the pump and your choice of gauge!

4 Replies

1735 Views

Last post by Layden Butler
Thu Nov 10, 2022 6:21 pm
WTB Model A Ford Fuel Bowl

Last post by Mark Gregush « Thu Nov 10, 2022 6:07 pm
Replies: 3
by ThreePedalTapDancer » Wed Nov 09, 2022 6:22 pm

First post

Looking for a glass firewall mounted fuel bowl for a Model A Ford.

C5BBE052-6E48-44E3-B5F9-03F7909FA204.jpeg
94CAD5ED-B97C-42AE-9E3B-968D1C0547BB.png

Last post

If it does not have the brass screen installed, get one. The A parts suppliers should have them in stock. Or make one out of very fine mesh brass screen.

3 Replies

996 Views

Last post by Mark Gregush
Thu Nov 10, 2022 6:07 pm
Wanted driver side Pre 1925 sedan door latch

Last post by Bruce Z « Thu Nov 10, 2022 3:50 pm

by Bruce Z » Thu Nov 10, 2022 3:50 pm

I have passenger side door latch and need drivers side. Passenger side is pictured. IMG_0820.JPG IMG_0616.JPG

0 Replies

796 Views

Last post by Bruce Z
Thu Nov 10, 2022 3:50 pm
Replacement Piston pins FS

Last post by Dan Hatch « Thu Nov 10, 2022 2:59 pm
Replies: 3
by Dan Hatch » Sat Oct 01, 2022 4:13 pm

First post

Here is a set of piston pins. Old stock. Box says.005 so they must be oversized. One has some light surface rust, should clean up.
$10 + shipping. Email me at address in pictures. Thanks Dan
214CA304-B19B-47AA-862D-9393EC1BD77E.jpeg
354097CF-0301-4EF2-860C-795B35552CFE.jpeg
D3870B3B-25D3-40AC-993C-CE1000AE8124.jpeg

Last post

Back to the top

3 Replies

1203 Views

Last post by Dan Hatch
Thu Nov 10, 2022 2:59 pm
Reproduction Ford Service Bulletins FS

Last post by Dan Hatch « Thu Nov 10, 2022 2:59 pm
Replies: 6
by Dan Hatch » Thu Sep 29, 2022 7:36 pm

First post

Here are 18 reproduction Ford Service Bulletins. These were Reproduced by MTFCI back in the 70’s and 80’s. This is Vol3 #7 to Vol 5 #1. Still in the mailing envelope. Has 4th set of 18 written on it. $90 + shipping. That is $5.00 each. Email me at address in pictures. Thanks Dan
66A162E3-198E-40CF-96BC-0000DB20202F.jpeg...

Last post

Back to the top

6 Replies

1754 Views

Last post by Dan Hatch
Thu Nov 10, 2022 2:59 pm
21” wheels FS

Last post by Dan Hatch « Thu Nov 10, 2022 2:58 pm
Replies: 7
by Dan Hatch » Sat Sep 24, 2022 2:24 pm

First post

Here are 21” wood wheels. Fair to good. Hubs look ok. 4 rear 5 front.
$200 for all of them. Pickup only Zip 35173.
Email me at address in pictures. Thanks Dan
5FB0B069-CBAF-490C-8442-C67E0BB0A61F.jpeg
75FDD9AF-ABF4-4A7E-9112-0AEF26D78D27.jpeg
9A035D4D-1A44-4AE0-8DB9-47D7718BB05D.jpeg

Last post

One more week than out comes sawsall

7 Replies

2799 Views

Last post by Dan Hatch
Thu Nov 10, 2022 2:58 pm
WTB Dash, Switch & Ammeter, Coil Box

Last post by CTLeonard « Thu Nov 10, 2022 12:22 pm
Replies: 1
by jamlip » Thu Nov 10, 2022 11:39 am

First post

Would like to buy the following for my 1921 Touring:

Dash
Switch
Ammeter
Coil box (keyless)
Horn button and bracket

Kind regards,

James

Last post

I have a good coil box, and I have the dash if I can just find it. ctleonard64@gmail.com

1 Replies

879 Views

Last post by CTLeonard
Thu Nov 10, 2022 12:22 pm
WTB 1911 fuel shut valve

Last post by got10carz « Thu Nov 10, 2022 11:23 am
Replies: 3
by MarkB » Wed Nov 09, 2022 4:43 pm

First post

I am looking for the fuel shut off valve that comes off of the round gas tank and goes to the carburetor. this is for a 1911 touring car, prefer original but i will consider a repop. i have been told that repops are not available anymore.

Last post

E mail sent. Steve

3 Replies

1210 Views

Last post by got10carz
Thu Nov 10, 2022 11:23 am
FS 3 Wire Wheel Rear Hubs

Last post by 25tfire « Thu Nov 10, 2022 9:32 am

by 25tfire » Thu Nov 10, 2022 9:32 am

Pretty good condition should clean up nice. Pictures to your text or email. Asking $100 each plus shipping. Jim

0 Replies

919 Views

Last post by 25tfire
Thu Nov 10, 2022 9:32 am
FS 4 26/27 Wire wheels

Last post by 25tfire « Thu Nov 10, 2022 9:27 am
Replies: 3
by 25tfire » Wed Nov 09, 2022 10:39 am

First post

These wheels are in good usable condition, Local PU or Shipping by FEDEX (costly). $400.00 Pictures on request to your email or Text, Jim

Last post

Colorado, note that 2 of the wheels have had some welding done to the center hub area, and the black one has a bent spoke. I have 3 left.

3 Replies

1489 Views

Last post by 25tfire
Thu Nov 10, 2022 9:27 am
Speedster Hood Strap Kit

Last post by Stephen1915 « Thu Nov 10, 2022 8:17 am
Replies: 3
by Stephen1915 » Wed Nov 09, 2022 11:56 pm

First post

Black leather and Stainless spring Speedster Hood Strap kit. New, never used. $139.00 new from Lang’s.
$80+$10 shipping.

Last post

SOLD Pending Payment. Thank You MTCF

3 Replies

1162 Views

Last post by Stephen1915
Thu Nov 10, 2022 8:17 am
1913 Touring Parts (PARTS FOUND)

Last post by Don ellis « Wed Nov 09, 2022 4:00 pm
Replies: 1
by kommandant 95 » Tue Nov 08, 2022 8:38 pm

First post

(PARTS FOUND)

Hi,
I am looking for:
Windshield hinges
Taillight bracket for a touring body
Front fender brackets
If anyone is willing to sell me any of these items I am willing to negotiate prices.
Please reply to post or email me at kristian.thurber@comcast.net
Posted in general discussion area as well

Last post

I have these for a 13

1 Replies

1076 Views

Last post by Don ellis
Wed Nov 09, 2022 4:00 pm
3 and 4 dip crankcase covers fs

Last post by CTLeonard « Wed Nov 09, 2022 9:35 am
Replies: 3
by CTLeonard » Wed May 25, 2022 11:34 am

First post

Have a number of these. Will blast clean for you. 25.00 each plus shipping IMG_20220525_103020584.jpg

Last post

Still have some of these

3 Replies

1497 Views

Last post by CTLeonard
Wed Nov 09, 2022 9:35 am
Steering wheel fs. Sold

Last post by CTLeonard « Wed Nov 09, 2022 9:26 am
Replies: 1
by CTLeonard » Mon Oct 24, 2022 12:02 pm

First post

Pretty nice wheel. Actually measures 14.75 od. Cast spider no. T-902. Has a set screw in it, don't believe that to be original. 80.00 plus shipping. ctleonard64@gmail.com IMG_20221024_105511188.jpg IMG_20221024_105450755.jpg IMG_20221024_105558130.jpg IMG_20221024_105526123.jpg IMG_20221024_105517255.jpg

Last post

Now 70.00 plus shipping

1 Replies

1063 Views

Last post by CTLeonard
Wed Nov 09, 2022 9:26 am
Boyco Service Can Top Clamp

Last post by ThreePedalTapDancer « Wed Nov 09, 2022 8:50 am
Replies: 4
by ThreePedalTapDancer » Fri Oct 14, 2022 4:33 pm

First post

Very hard to find original running board can Boyco Service Unit hold down clamp. This would rest on top of the Boyco can lids, and straps would hold it in place. 12 inches long. Stamped steel. 60.00 includes shipping.

D4F7F05E-608F-406E-9120-1AE592032A17.jpeg 51119DFB-A53D-4573-B17C-1B9BC64C2975.jpeg[/attachmen...

Last post

The original strap goes just as seen in photo. It goes up, over and through slot, runs underneath and out of slot on other end down to buckle.

4 Replies

1598 Views

Last post by ThreePedalTapDancer
Wed Nov 09, 2022 8:50 am
SOLD 1912 Holley carburetor

Last post by Mike Lebsack-Iowa « Tue Nov 08, 2022 10:24 pm
Replies: 3
by RGould1910 » Tue Nov 08, 2022 8:07 am

First post

1912 Russ Potter carburetor. Acquired about 20 years ago and put aside after a successful test run. Like a 5 ball Russ restored for me, it has a screw type float adjustment that allows you to dial in the float height. Fully restored. $425 plus actual cost of flat rate Priority shipping. Payment by personal check or PayPal, friends....

Last post

John,
I just sent you an email to your email. Mike Lebsack

3 Replies

1215 Views

Last post by Mike Lebsack-Iowa
Tue Nov 08, 2022 10:24 pm
SOLD Kingston 6 ball carburetor

Last post by Tparts « Tue Nov 08, 2022 10:21 pm
Replies: 1
by RGould1910 » Tue Nov 08, 2022 5:03 pm

First post

Appears to be minimally restored from an excellent original. Excellent original float and components.
Price $600 plus shipping. Contact me by private email. 20221108_134413.jpg 20221108_134128.jpg 20221108_133851.jpg 20221108_133833.jpg 20221108_133330.jpg

Last post

Message sent.
Don Lang

1 Replies

961 Views

Last post by Tparts
Tue Nov 08, 2022 10:21 pm
Leaf Spring Leaves - with moving pictures

Last post by T Cruiser « Tue Nov 08, 2022 8:26 pm
Replies: 1
by Gen3AntiqueAuto » Tue Nov 08, 2022 12:51 pm

First post

Got them out and photographed them for anyone interested.
I am still looking for gas headlights and brass steering column parts - willing to barter.

Last post

I have several early steering columns. What year are you interested in? Ted 503-728-3476

1 Replies

987 Views

Last post by T Cruiser
Tue Nov 08, 2022 8:26 pm
Front and rear hubs fs. Sold

Last post by TWrenn « Tue Nov 08, 2022 5:34 pm
Replies: 2
by CTLeonard » Mon Oct 24, 2022 1:21 pm

First post

Good set of hubs. Inner and outer races are good. Threads are good. And the keyways are good! that's a lot of good . 190.00 plus shipping for all. ctleonard64@gmail.com IMG_20221024_121412693.jpg IMG_20221024_121443329.jpg IMG_20221024_121433826.jpg IMG_20221024_121425460.jpg

Last post

Sending a PM

2 Replies

1146 Views

Last post by TWrenn
Tue Nov 08, 2022 5:34 pm
Kingston carburetor, more photos

Last post by RGould1910 « Tue Nov 08, 2022 5:19 pm

by RGould1910 » Tue Nov 08, 2022 5:19 pm

More photos.
20221108_131552.jpg 20221108_131435.jpg 20221108_131424.jpg 20221108_131336.jpg

0 Replies

786 Views

Last post by RGould1910
Tue Nov 08, 2022 5:19 pm
Sold brackets

Last post by Art Ebeling « Tue Nov 08, 2022 1:23 pm
Replies: 2
by Melba Nolan » Mon Sep 19, 2022 12:41 pm

First post

For sale: brake rod support brackets 16/27 $10 for the pair plus $9 shipping
20220919_113448.jpg 20220919_113405.jpg

Last post

I'll take those. PM sent. Art

2 Replies

1278 Views

Last post by Art Ebeling
Tue Nov 08, 2022 1:23 pm
Contact info

Last post by RGould1910 « Tue Nov 08, 2022 10:40 am
Replies: 2
by RGould1910 » Tue Nov 08, 2022 8:57 am

First post

Re items I have for sale. Please contact me by private email and provide your return email address as yours is not automatically included with your message. Thanks. Rgould 1910

Last post

Thanks, I was able to make contact and conclude the sale.

2 Replies

1151 Views

Last post by RGould1910
Tue Nov 08, 2022 10:40 am
SOLD 1913 Transmission cover

Last post by RGould1910 « Tue Nov 08, 2022 8:44 am

by RGould1910 » Tue Nov 08, 2022 8:44 am

1913 transmission cover believed to be an original, $65. 00 plus actual shipping. 20221107_152102.jpg 20221107_152052.jpg

0 Replies

861 Views

Last post by RGould1910
Tue Nov 08, 2022 8:44 am
SOLD Early front fender irons

Last post by RGould1910 « Tue Nov 08, 2022 8:29 am

by RGould1910 » Tue Nov 08, 2022 8:29 am

Front fender irons for a brass era T. Single fork lip. One iron has a slight bow and twist. 75.00 plus actual shipping.
20221107_155000.jpg 20221107_155027.jpg 20221107_155115.jpg

0 Replies

795 Views

Last post by RGould1910
Tue Nov 08, 2022 8:29 am
New misc oil seal thrust washer

Last post by Melba Nolan « Tue Nov 08, 2022 12:24 am
Replies: 3
by Melba Nolan » Thu Jun 23, 2022 8:27 pm

First post

For Sale: steering gear pin set for 9/27 $2
front axle and steering castle nuts for 9/27
MBB Quadrant mounting rivets. BRASS $1
lower crankcase cover bolts 17 pcs. 9/27 $3
Head bolts High Cylinder 3 1/4 $1.75 each
Differential gear key $1.50
Fan bushing $7.50 pr. 20/27
Manifold studs and nuts 9/23 $2 each
Brass thrust washer $12 each
Brake rod...

Last post

move to top

3 Replies

1596 Views

Last post by Melba Nolan
Tue Nov 08, 2022 12:24 am
dome lights

Last post by Melba Nolan « Tue Nov 08, 2022 12:20 am
Replies: 4
by Melba Nolan » Wed Jun 29, 2022 10:42 pm

First post

For Sale: Dome light $25
Dome light with wood looking trim $25
email for pictures

all plus postage 20220620_185656.jpg 20220629_202617.jpg 202206

Last post

move to top

4 Replies

1641 Views

Last post by Melba Nolan
Tue Nov 08, 2022 12:20 am
Ford script fan pulley and shaft

Last post by Melba Nolan « Tue Nov 08, 2022 12:18 am
Replies: 1
by Melba Nolan » Mon Sep 26, 2022 7:42 pm

First post

For sale: fan pulley with front and rear bushings, shaft, fan shaft cap and castle nut. pulley and shaft have Ford script $40 plus postage
20220926_180651.jpg 20220926_183901.jpg 20220926_183851.jpg

Last post

move to top

1 Replies

927 Views

Last post by Melba Nolan
Tue Nov 08, 2022 12:18 am
FS—->. Headlights

Last post by Runabout « Mon Nov 07, 2022 11:19 pm
Replies: 1
by Runabout » Mon Nov 07, 2022 5:15 pm

First post

These have reflectors,& rings… I also have 2 lenses included and 2 bulb sockets not pictured, ect… $135obo. Plus shipping. Total of 3 lights.
Text or call 423-2eight4-97fifty. Thanks.
8E8DB838-DEF2-4AE5-A2C4-0294715F1460.jpeg A0B9C16C-364D-4829-B39B-F254F5F9BE5D.jpeg

Last post

Back to the top.

1 Replies

1054 Views

Last post by Runabout
Mon Nov 07, 2022 11:19 pm
FS 1932 FORD B MANIFOLDS

Last post by got10carz « Mon Nov 07, 2022 8:46 pm
Replies: 3
by got10carz » Sun Oct 16, 2022 12:59 pm

First post

For Sale 1932 manifold assembly $150. These were considered a performance upgrade, with a exhaust that slants back like a stock T. Steve 701 212 5009

Last post

Yes, please call

3 Replies

1427 Views

Last post by got10carz
Mon Nov 07, 2022 8:46 pm
Non Model T Stromberg OF carb

Last post by Bruce Compton « Mon Nov 07, 2022 8:38 pm
Replies: 6
by Bruce Compton » Fri Nov 04, 2022 9:03 pm

First post

Oddball Stromberg OF carb that has the mounting holes at 3 3/8 centers (the regular T Stromberg OF is 3 1/8 C-C). I bought this as a parts core as it was missing several pieces but I was able to find the correct parts so I did it up. Everything inside appears identical to every OF I've seen (jets,vents,needle valve/seat, throttle bore, float and...

Last post

Any interest or offers on this Stromberg OF before I have the existing holes plugged and a new set of holes bored and threaded at the proper T mounting spacing?? Bruce

6 Replies

1521 Views

Last post by Bruce Compton
Mon Nov 07, 2022 8:38 pm
curtain rod sold

Last post by Melba Nolan « Mon Nov 07, 2022 6:37 pm
Replies: 2
by Melba Nolan » Sat Oct 01, 2022 10:08 pm

First post

For sale: Curtain support rods 26/27 $15 for 2 rods $25 for 4 rods plus postage

Last post

sold pending payment

2 Replies

1059 Views

Last post by Melba Nolan
Mon Nov 07, 2022 6:37 pm
W2B gas head light forks

Last post by lnoller « Mon Nov 07, 2022 5:39 pm
Replies: 1
by Nv Bob » Mon Nov 07, 2022 3:07 pm

First post

Looking for pair 6 7/8
Must be usable can be repops don't care
Thanks in advance
Jalopyt@yahoo.com

Last post

Message sent

1 Replies

865 Views

Last post by lnoller
Mon Nov 07, 2022 5:39 pm
WTB: Octagon hub cap wrench

Last post by nsbrassnut « Mon Nov 07, 2022 4:40 pm
Replies: 23
by jaybee47 » Sun Oct 30, 2022 6:35 pm

First post

Would like to buy a hub cap wrench. 2 octagon (2 measurement from side to side). Material may be iron, brass, bronze or steel. Any design as long as there is a 2 octagonal hole. Reference picture attached. Hub cap wrench octagon.jpg

Last post

Hi Jay

It would be interesting to know.

A thought if you are interested. I did save scans of the small collection of Metz literature that I had when I sold mine. There are a couple parts books, manuals and a sales item or two. If you are interested in any copies they are available for the asking. Just send me a PM with your email contact and I...

23 Replies

5082 Views

Last post by nsbrassnut
Mon Nov 07, 2022 4:40 pm
Stromberg OF restored and tested

Last post by Robert Bente « Mon Nov 07, 2022 3:28 pm
Replies: 6
by Bruce Compton » Fri Nov 04, 2022 8:44 pm

First post

Finally finished another Hershey find. Restored and tested Stromberg OF. Totally gone through with new needle, all cleaned passages and jets, repaired throttle shaft/bushings and added external choke spring and fuel level sight plug. Tested and adjusted, ready to run. Asking $630.00 including shipping.

Last post

John, I’m not sure what I'm going to do with the Winfield yet.

6 Replies

2091 Views

Last post by Robert Bente
Mon Nov 07, 2022 3:28 pm
FS brake pads for Texas T brakes.

Last post by Tim D « Mon Nov 07, 2022 2:07 pm
Replies: 10
by Tim D » Tue Oct 18, 2022 10:54 am

First post

I have 3 boxs of new pads for The Texas T brakes. New been on a shelf.
List is $113 per set
Will sell $50 per box plus $15 shipping in US only.

Last post

Sold all 3 boxs gone thanks everyone.

10 Replies

2505 Views

Last post by Tim D
Mon Nov 07, 2022 2:07 pm
FS clock

Last post by Allan « Mon Nov 07, 2022 6:27 am

by Allan » Mon Nov 07, 2022 6:27 am

Phinney Walker rim wind clock. Undamaged original, with mounting bracket.
Watchmaker cleaned, lubricated and serviced. Keeps very good time. It will stop if left face down. I don't know if this is usual or not. $220 posted to your door.
Allan from down under. 20221107_160004.jpg 20221107_160004.jpg

0 Replies

915 Views

Last post by Allan
Mon Nov 07, 2022 6:27 am
Essex front end

Last post by John kuehn « Sun Nov 06, 2022 9:11 pm
Replies: 3
by brian2264 » Sun Nov 06, 2022 10:46 am

First post

I bought a boat tail speedster project that has an Essex front end in it. I believe that was a period correct set up for speedsters but I'm going a different direction with drop axle and reverse eye spring to lower it. I'm looking to sell this set up but not sure the value. Open to advice and or offers. I'm in barneveld ny

Last post

Looks like a dropped front end like the later old school hot rods. Kinda neat.

3 Replies

1428 Views

Last post by John kuehn
Sun Nov 06, 2022 9:11 pm
FS: E&J "1908" Burners, Missing Thumb Wheels

Last post by pre15dale « Sun Nov 06, 2022 7:13 pm
Replies: 2
by Rodger Erickson » Sat Oct 22, 2022 12:37 am

First post

FS: Three E&J 1908 Burners, all are Missing Thumb Wheels. I have:
One early one with a 2-piece housing, decent condition, $30
One of the more common later ones with 1-piece housing, dull plating, a few dings, $20
Another later one with some fatigue cracks in the housing, $15
Prices do not include shipping.
Thanks for looking.

ej08bn01.jpg...

Last post

Yes there is interest but not so much at thzt price

2 Replies

1337 Views

Last post by pre15dale
Sun Nov 06, 2022 7:13 pm
FOR SALE: MODEL TT TRUCK REAR END SHORTING KIT FOR AUX. TRANSMISSION SOLD SOLD SOLD

Last post by mtntee20 « Sun Nov 06, 2022 10:00 am
Replies: 4
by StevenS » Sat Nov 05, 2022 3:11 pm

First post

I have for sale a MODEL TT TRUCK REAR END SHORTING KIT FOR AUX. TRANSMISSION like a Muncie, Jumbo, Warford, etc. It has the torque tube shout, and the two radius rod ends. The price is $120 and that includes shipping (it's heavy) to the lower 48 states. Shipping elsewhere will need to be adjusted. What this kit will do, allows you to cut off the...

Last post

Thank You Steven
Thank You MTFCA

4 Replies

1238 Views

Last post by mtntee20
Sun Nov 06, 2022 10:00 am
Model N Fenders For Sale

Last post by RedDogPilot « Sun Nov 06, 2022 9:24 am

by RedDogPilot » Sun Nov 06, 2022 9:24 am

IMG_3879.jpg I have made a new set of four Model N Fenders.

I have made them from 22 gauge cold rolled steel, formed to shape, with the correct rolled bead. Price includes fender brackets with clips and rivets. $750.

Pick up locally in Monkton, MD, pay actual shipping cost, or pick up at Hershey in October.[im g]

0 Replies

1088 Views

Last post by RedDogPilot
Sun Nov 06, 2022 9:24 am
FS HEADLIGHT BUCKET SET

Last post by Mark Chaffin « Sun Nov 06, 2022 9:09 am
Replies: 1
by Mark Chaffin » Sat Nov 05, 2022 1:45 pm

First post

Headlight bucket set (15-17) $100 plus $21.50 domestic shipping. Mark Chaffin (951) 805-0928. SOLD

20221105_085053.jpg

20221105_085117.jpg

Last post

These have been sold. Thank you.

1 Replies

941 Views

Last post by Mark Chaffin
Sun Nov 06, 2022 9:09 am
FS MISCELLANEOUS

Last post by Mark Chaffin « Sun Nov 06, 2022 9:08 am
Replies: 7
by Mark Chaffin » Sat Nov 05, 2022 1:50 pm

First post

Miscellaneous parts. Description, prices and shipping as indicated below. Mark Chaffin (951) 805-0928

20221105_085301.jpg
Scandinavia band lining set (09-25). Length overall is 22 3/8 . $50.00 plus $9.50 shipping

20221105_085435.jpg
20221105_085458.jpg
Milwaukie timer $40.00 plus $9.50 shipping

20221105_085803.jpg
Fan pulley lot with...

Last post

Fan pulley lot sold to Chad. Thank you.

7 Replies

1913 Views

Last post by Mark Chaffin
Sun Nov 06, 2022 9:08 am
axle shaft

Last post by Melba Nolan « Sat Nov 05, 2022 10:53 pm
Replies: 6
by Melba Nolan » Tue Nov 01, 2022 8:28 pm

First post

For sale: New axle shaft has surface rust but no pitting $75 plus postage
20221101_173112.jpg 20221101_173148.jpg 20221101_173157.jpg

Last post

were not ford script. still available

6 Replies

1685 Views

Last post by Melba Nolan
Sat Nov 05, 2022 10:53 pm
Found 1923 short slope firewall brackets

Last post by Reno Speedster « Sat Nov 05, 2022 10:04 pm
Replies: 6
by Don ellis » Wed Nov 02, 2022 5:19 pm

First post

I too am in need of a set for a early 23 with metal fire wall. It seems the short slope one’s are correct.

Last post

Thanks for the tips. I have some 26-27 ones on hand but I would like the correct ones. Several folks have offered up sets, but so far I have not been able to find a set that was not cracked or welded. Still looking.

6 Replies

1292 Views

Last post by Reno Speedster
Sat Nov 05, 2022 10:04 pm
Steel Ford-O type Cowl Lamp Retrofit for Early Cars

Last post by Rodger Erickson « Sat Nov 05, 2022 9:52 pm

by Rodger Erickson » Sat Nov 05, 2022 9:52 pm

For Sale: One Right Side steel lantern, I believe this light is an E&J, the lens is a Jefferson 911. This is a retrofit to mount to an earlier car, it uses an earlier-style mounting bracket. The fount, burner and reflector are missing. The steel looks solid. Asking $30, not including shipping.

jef91101.jpg

jef91102.jpg

jef91103.jpg...

0 Replies

854 Views

Last post by Rodger Erickson
Sat Nov 05, 2022 9:52 pm
SOLD: 1925 Automobile Tour Book and 1927 Automobile Blue Book for Northeastern States

Last post by J1MGOLDEN « Sat Nov 05, 2022 7:38 pm
Replies: 8
by GGZ » Sat Jul 09, 2022 6:30 pm

First post

SOLD!!!!

How about 45.00 including shipping within the USA!

Here are two fun pieces of early motoring literature.

The 1925 Automobile Tour Book was published by the Automobile Club of Buffalo AAA. It measures about 9 by 6 and has about 730 pages.

The 1927 Automobile Blue Book Volume 1 was published by Automobile Blue Books Inc and...

Last post

Sold and Shipped.

8 Replies

2273 Views

Last post by J1MGOLDEN
Sat Nov 05, 2022 7:38 pm
FOR SALE Model T Thermostats LOWER PRICE (NUMBER 1 and 2 IS SOLD)

Last post by Tea_time_racer « Sat Nov 05, 2022 6:43 pm
Replies: 10
by StevenS » Tue Oct 25, 2022 6:02 pm

First post

FOR SALE MODEL T THEMOSTATS. There are two different ONES. The one marked #1 is adjustable for temperature, it has some small dents and a lot of paint scratches, but it is NOT USED, NOS. SEE PICTURES. The price for NUMBER ONE is $50 and that includes the shipping to the lower 48 states. The one marked #2 just drops in on the outlet of the head, it...

Last post

Payment and PM sent. Thanks

10 Replies

2464 Views

Last post by Tea_time_racer
Sat Nov 05, 2022 6:43 pm
Contact for Gene French

Last post by TWrenn « Sat Nov 05, 2022 9:50 am
Replies: 5
by RajoRacer » Fri Nov 04, 2022 1:55 pm

First post

Anyone heard from Gene as of late ? Needing a re-Babbitted ball cap !

Last post

Thanks Gene - I'll get in touch.

Didn't receive any email Tim ?

Hmmmm....wow, wonder why. Sorry, but at least Gene answered!

5 Replies

1392 Views

Last post by TWrenn
Sat Nov 05, 2022 9:50 am
FS DEMOUNTABLE BAND SET LINNED

Last post by Mark Chaffin « Fri Nov 04, 2022 11:25 pm
Replies: 3
by Mark Chaffin » Wed Nov 02, 2022 10:35 pm

First post

Scandinavia lined demountable band set. New linings. For 09-25 narrow drums $100 plus $19.50 domestic shipping. Mark Chaffin (951) 805-0928

20221102_191638.jpg

20221102_191654.jpg

20221102_191827.jpg

Last post

Sold to Joe. Thank you.

3 Replies

1181 Views

Last post by Mark Chaffin
Fri Nov 04, 2022 11:25 pm
Stromberg LF PreHeater

Last post by ThreePedalTapDancer « Fri Nov 04, 2022 4:27 pm
Replies: 7
by ThreePedalTapDancer » Fri Oct 14, 2022 4:27 pm

First post

No longer available.

Last post

Still available

7 Replies

1756 Views

Last post by ThreePedalTapDancer
Fri Nov 04, 2022 4:27 pm
FS TAILGATE LATCH SET

Last post by Mark Chaffin « Fri Nov 04, 2022 12:37 pm
Replies: 2
by Mark Chaffin » Wed Nov 02, 2022 10:31 pm

First post

Tailgate latch sets brass $40.00 per set plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20221102_190810.jpg

20221102_190926.jpg

Last post

Both sets sold to Rich. Thanks Rich!

2 Replies

1129 Views

Last post by Mark Chaffin
Fri Nov 04, 2022 12:37 pm
Sold Brass Waltham Watch Company 8 Days Car Auto Clock

Last post by Tourabout « Fri Nov 04, 2022 12:22 pm
Replies: 10
by Quickm007 » Mon Feb 07, 2022 1:04 pm

First post

Vintage solid Brass Waltham Watch Company 8 Days Car Auto Clock Watch. Clock needs Adjustments. Made in USA. 2 minutes hand is in a bag attached to the clock, don't know which one is the correct one. I Bought it from Tim Mosher. He told me '' It is a high quality Waltham 8 days auto clock. Model 1910, made from 1910-1918 ……….that going from memory...

Last post

John is still talking in Morse code??

10 Replies

3701 Views

Last post by Tourabout
Fri Nov 04, 2022 12:22 pm
Free: Steel Truss Head Rivets 3/16" x 1 1/4"

Last post by Rodger Erickson « Fri Nov 04, 2022 12:13 pm
Replies: 7
by Rodger Erickson » Fri Jul 29, 2022 10:39 am

First post

Free: approx 4 lbs (roughly 250 - 300 pcs.) Truss head (or mushroom head or brazier head) rivets, with a 3/16 x 1 1/4 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or...

Last post

Any of you guys need any more steel rivets? I've still got a bunch!

7 Replies

2656 Views

Last post by Rodger Erickson
Fri Nov 04, 2022 12:13 pm
FS WHEEL BEARING SET

Last post by TWrenn « Thu Nov 03, 2022 7:26 pm
Replies: 7
by Mark Chaffin » Wed Nov 02, 2022 10:37 pm

First post

Used front wheel bearings set. Greasy but good! Price is $40.00 plus $9.50 shipping. Mark Chaffin (951) 805 0928.

20221102_191458.jpg

20221102_191527.jpg

Last post

I assumed it was Morse Code ?

:lol: :lol: :lol:

7 Replies

1716 Views

Last post by TWrenn
Thu Nov 03, 2022 7:26 pm
sold haynes rims 30 x 3.5

Last post by jmash2120 « Thu Nov 03, 2022 2:16 pm
Replies: 3
by Melba Nolan » Sat Sep 24, 2022 3:52 pm

First post

For sale: 4 haynes rims. good condition $125 each plus postage
20221013_175927.jpg

Last post

Are any of those rims still available? Very interested.

3 Replies

1702 Views

Last post by jmash2120
Thu Nov 03, 2022 2:16 pm
For Sale: Zenith Carburetor

Last post by RichJ « Thu Nov 03, 2022 2:07 pm

by RichJ » Thu Nov 03, 2022 2:07 pm

Mark just sold a Zenith carburetor. I have one that is very similar. It is clean, complete and there is no wear on the throttle shaft. The bore at the throttle plate is 15/16. The carburetor is NOT rebuilt. but possibly it is functional as is. $65

0 Replies

976 Views

Last post by RichJ
Thu Nov 03, 2022 2:07 pm
spare tire carrier 21"

Last post by Melba Nolan « Thu Nov 03, 2022 10:41 am
Replies: 12
by Melba Nolan » Mon Aug 22, 2022 6:43 pm

First post

For sale: spare tire carrier. $125 plus postage.

20220819_104114.jpg 20220819_104128.jpg

Last post

move to top

12 Replies

3042 Views

Last post by Melba Nolan
Thu Nov 03, 2022 10:41 am
FS Stromberg OF carburetor.

Last post by TRZim « Thu Nov 03, 2022 8:40 am
Replies: 1
by Allan » Thu Nov 03, 2022 7:44 am

First post

As shown in photos. Excellent original condition. Even the needle rod still has its two ears for the float level adjustment. All complete, with economiser lever roller free to work.
Two minor departures from standard. The threaded holes for the manifold mounting bolts have been reamed it to take standard 3/8 nuts and bolts, and the holes elongated...

Last post

I will buy it, let me know about payment. email me at trzim05@yahoo.com

1 Replies

915 Views

Last post by TRZim
Thu Nov 03, 2022 8:40 am
FS NOS tie rod bolts

Last post by Mark Osterman « Thu Nov 03, 2022 4:24 am
Replies: 1
by Charles J » Sat Oct 29, 2022 6:45 pm

First post

A pair nos tie rod bolts with the flip oilers no bushings bolts and oilers only $20 plus shipping these are NOS I got them from Mark chiffen years ago

Last post

Do you still have the bolts for sale?

1 Replies

1208 Views

Last post by Mark Osterman
Thu Nov 03, 2022 4:24 am
FS REBUILT ZENITH CARBURETOR

Last post by Mark Chaffin « Wed Nov 02, 2022 11:34 pm
Replies: 1
by Mark Chaffin » Wed Nov 02, 2022 10:39 pm

First post

One rebuilt Zenith carburetor. Excellent condition $150 plus $19.50 domestic shipping. Mark Chaffin (951) 805-0928.

20221102_191947.jpg

Last post

Carburetor has been sold. Thank you.

1 Replies

845 Views

Last post by Mark Chaffin
Wed Nov 02, 2022 11:34 pm
FS BENDIX ASSEMBLY

Last post by Mark Chaffin « Wed Nov 02, 2022 11:16 pm
Replies: 1
by Mark Chaffin » Wed Nov 02, 2022 10:41 pm

First post

One complete bendix assembly $50.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20221102_192047.jpg

Last post

Bendix has been sold. Thank you.

1 Replies

778 Views

Last post by Mark Chaffin
Wed Nov 02, 2022 11:16 pm
1915 couplet body FS

Last post by 23ford « Wed Nov 02, 2022 9:49 pm
Replies: 1
by Nv Bob » Mon Oct 31, 2022 2:11 am

First post

1915 coiplet body fully restored ready to mount on your chassis
Very SERIOSE Inquireys ONLY for contact info locate western Nv
PRICE 21K
contact me for contact info

Last post

Sent email

1 Replies

1480 Views

Last post by 23ford
Wed Nov 02, 2022 9:49 pm
FOR SALE 1926 1927 APRON RADIATOR SOLD SOLD SOLD

Last post by KeithG « Wed Nov 02, 2022 9:43 pm
Replies: 6
by StevenS » Wed Nov 02, 2022 10:28 am

First post

FOR SALE A 1926 1927 RADIATOR APRON. Looks very solid and cannot see any cracks. The price is $75 and that includes the shipping to the lower 48 states. You can email me or PM me, first come first served.

995 model t 2627.jpg

Last post

Good catch, Jim Sr.!!!
Keith

6 Replies

1932 Views

Last post by KeithG
Wed Nov 02, 2022 9:43 pm
WTB:1915/16 Roadster Turtle Deck Latch Handel

Last post by ModelTMark « Wed Nov 02, 2022 9:42 pm

by ModelTMark » Wed Nov 02, 2022 9:42 pm

WTB:1915/16 Roadster Turtle Deck Latch Handel. One of mine fell off when I was towing my 15 on my open trailer. :( email or message me.

r/Mark

0 Replies

815 Views

Last post by ModelTMark
Wed Nov 02, 2022 9:42 pm

New Topic

10734 topics

Page 105 of 108
- Jump to page:
Previous
1
…
103
104
105
106
107
108
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum