Classifieds - Parts - Page 19

Classifieds - Parts

New Topic

10463 topics

Page 19 of 105
- Jump to page:
Previous
1
…
17
18
19
20
21
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84127 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

WTB carb heater assembly for 2016 runabout

Last post by w_cbeyer@hotmail.com « Mon Jul 14, 2025 8:04 am
Replies: 2
by w_cbeyer@hotmail.com » Sat Jul 12, 2025 3:42 pm

First post

New to model T car I acquired is missing the carb heater.

Last post

Need carb heater assembly for 1916 T

2 Replies

604 Views

Last post by w_cbeyer@hotmail.com
Mon Jul 14, 2025 8:04 am
65" speedometer cable sheaths. SOLD

Last post by big2bird « Sun Jul 13, 2025 10:21 pm
Replies: 3
by big2bird » Sun Jul 13, 2025 5:48 pm

First post

20250713_141651.jpg 20250713_141656.jpg 20250713_141703.jpg

Two speedo cable sheaths only. Both 65 . I believe Mr. Furstnow can shorten these if needed.

$30 each + $10 shipping.

Contact via forum. PM or e- mail.

Check or PayPal

Last post

Both sold.....

3 Replies

462 Views

Last post by big2bird
Sun Jul 13, 2025 10:21 pm
FS - Runabout (Touring)top iron body brackets

Last post by Hap_Tucker « Sun Jul 13, 2025 9:23 pm
Replies: 10
by Dennis Fleming » Thu Jun 26, 2025 5:56 pm

First post

Set of roadster top iron body brackets. Right and left with top nuts. $50.00 plus shipping IMG_2190.jpeg IMG_2189.jpeg

Last post

(continued)

Below is a photo from Clayton Swanson when he was selling an unmolested 1921 touring that still had the 5-piece rear tub and the top saddle rest coming down from the rear seat like the previous 1915-1920 cars.

1921 By Clayton Swanson.jpg

Below is what I believe are the typical 1921ish (again overlap in production) to 1925 rear...

10 Replies

1821 Views

Last post by Hap_Tucker
Sun Jul 13, 2025 9:23 pm
WTB ‘26-‘27 Tail Lights

Last post by schwabd1 « Sun Jul 13, 2025 8:15 pm
Replies: 13
by schwabd1 » Wed Jul 09, 2025 6:40 pm

First post

Looking for a pair of ‘26-‘27 tail lights, (actually I think they started to use the drum tail light in 1924) one license bracket and left and right fender mounting brackets or any of those parts.

Last post

I talked to Steve at Lang’s a few days ago. He said he just sold the last one he had and just ordered 5 more. I would think their supplier would have told them they weren’t available, I’ll have to call him again tomorrow.

13 Replies

1355 Views

Last post by schwabd1
Sun Jul 13, 2025 8:15 pm
For Sale Pair of Glass Headlight Mirrors

Last post by Larry Debaugh « Sun Jul 13, 2025 4:16 pm
Replies: 5
by BigAl » Sun Jul 13, 2025 11:19 am

First post

For sale a pair of very nice headlmp mirrors/reflectors, These were removed from a pair of Jno Brown 19's. They are 6 in Dia. and are in excellent condition with no chips or scatches, These will make an extronary pair of mirrors/reflectors once resilvered. Asking $195.00 plus shipping. Please contact me via email or phone through the forum system,...

Last post

There is a 3/4 inch circle along the edge …. Within the circle it says John Brown Mfg Co. Larry

5 Replies

804 Views

Last post by Larry Debaugh
Sun Jul 13, 2025 4:16 pm
Brass open car mirror sold

Last post by big2bird « Sun Jul 13, 2025 3:06 pm
Replies: 2
by big2bird » Sun Jul 13, 2025 12:37 pm

First post

20250713_092320.jpg 20250713_092334.jpg 20250713_092340.jpg

One repo brass open car mirror.
$75 shipped to lower 48
Contact via forum pm or email

Last post

Sold to Scott pending payment.

2 Replies

567 Views

Last post by big2bird
Sun Jul 13, 2025 3:06 pm
Two pole dash switch sold

Last post by big2bird « Sun Jul 13, 2025 3:05 pm
Replies: 1
by big2bird » Sun Jul 13, 2025 12:40 pm

First post

20250713_092131.jpg 20250713_092127.jpg

Two pole accessory switch. Works. Needs cleaning.
$50 & $10 postage

Contact via forum pm or email.

Last post

Sale pending

1 Replies

456 Views

Last post by big2bird
Sun Jul 13, 2025 3:05 pm
FOR SALE...TRANSMISSION DRUM SET 1926-27

Last post by Ken Buhler « Sun Jul 13, 2025 11:23 am
Replies: 2
by Jack Putnam, in Ohio » Thu Jun 19, 2025 8:44 pm

First post

Set of 3 transmission drums for model Ts 1926 and 1927. These drums have been cleaned, checked for cracks by magna flux and have been precision ground and polished. The gears are excellent and tight. Brake drum uses replaceable shoes. Original bushings are on place and could be used without replacement. This is a great set of original Ford...

Last post

Hello Jack,
I sent a message and left one on your phone.
Ken Buhler

2 Replies

1908 Views

Last post by Ken Buhler
Sun Jul 13, 2025 11:23 am
Wanted: Stromberg LF Literature or Info

Last post by RajoRacer « Sat Jul 12, 2025 11:32 am
Replies: 5
by RajoRacer » Fri Jul 11, 2025 7:53 pm

First post

Anyone happen to have any literature on a LF - diagrams, cut-aways, etc ?

Last post

The late Stan Howe also re-printed the OF manual.

5 Replies

2222 Views

Last post by RajoRacer
Sat Jul 12, 2025 11:32 am
Got it done.....

Last post by GGZ « Fri Jul 11, 2025 6:17 pm
Replies: 5
by GGZ » Tue Jul 08, 2025 9:40 pm

First post

.....................

Last post

Thanks for your help!

5 Replies

2322 Views

Last post by GGZ
Fri Jul 11, 2025 6:17 pm
speedo swivel drive parts.

Last post by Allan « Fri Jul 11, 2025 8:37 am
Replies: 1
by Allan » Sat Jul 05, 2025 8:59 am

First post

I have these two original parts available. New reproduction are $79.95 each plus shipping.
These are $60 each with tracking postage delivered to your door. Either one, or save some postage if you want both.
20250705_163847.jpg
20250705_165854.jpg
Allan from down under

Last post

S bracket sold. L bracket still available.

Allan from down under.

1 Replies

1010 Views

Last post by Allan
Fri Jul 11, 2025 8:37 am
Clincher wheels with steel fellows and steel spokes

Last post by G.ARMS86 « Thu Jul 10, 2025 4:49 pm
Replies: 12
by G.ARMS86 » Fri Jul 04, 2025 12:20 pm

First post

For sale pair of red painted wheels with steel fellows and steel spokes in good condition asking 250 for the pair plus shipping or can deliver to Hershey text or call 2036873827

Last post

Back to the top

12 Replies

2066 Views

Last post by G.ARMS86
Thu Jul 10, 2025 4:49 pm
WTB 26/27 Roadster Side Curtains with rods.

Last post by 25tfire « Thu Jul 10, 2025 1:03 pm
Replies: 2
by 25tfire » Thu Jun 19, 2025 12:49 pm

First post

Looking for a set of side curtains for a 1926/27 Roadster with Irons, any condition will work, Jim

Last post

Hi Robert, were you able to find them and are they for sale?

2 Replies

1501 Views

Last post by 25tfire
Thu Jul 10, 2025 1:03 pm
WTB...RUNNUNG BOARDS 13-25

Last post by Jack Putnam, in Ohio « Thu Jul 10, 2025 12:59 pm
Replies: 5
by Jack Putnam, in Ohio » Mon Jul 07, 2025 4:54 pm

First post

I'm in need of a pair of running boards of the 1913 to 1925 vintage. Dont need be perfect but should be respectful and worthy on new paint. Please reply using the forum message.

Last post

Yes they cost to ship, that's ok. What will I owe you for the boards? My cell 419-306-3966 for text

5 Replies

1087 Views

Last post by Jack Putnam, in Ohio
Thu Jul 10, 2025 12:59 pm
WTB 1915 cowl lamps

Last post by mklooksup « Thu Jul 10, 2025 9:19 am
Replies: 1
by mklooksup » Sun Jun 22, 2025 8:41 pm

First post

Looking for a 1915 cowl lamp or two. Black and brass type.

Thanks

Manny

Last post

any condition?

1 Replies

1166 Views

Last post by mklooksup
Thu Jul 10, 2025 9:19 am
Kingston L4 carburetor

Last post by Corey Walker « Thu Jul 10, 2025 12:09 am

by Corey Walker » Thu Jul 10, 2025 12:09 am

Completely disassembled and cleaned, viton tipped float valve, tested float, new choke spring and ID tag, test run
$185 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

789 Views

Last post by Corey Walker
Thu Jul 10, 2025 12:09 am
Hollywood H1 carburetor for sale.

Last post by Allan « Wed Jul 09, 2025 8:10 pm
Replies: 5
by Allan » Wed Jul 09, 2025 12:06 am

First post

I ran this on my 1912 van for 25 years. The car got hard to crank start so I replaced it with Stan Howe rebuilt spare. It turned out that the hard starting was due to a shrunken cork float that was very loose on the hinge so the float level was all over th place.

It will need a new float. It may be better with a viton tip needle and seat, and a...

Last post

I completely overlooked that detail Layden. Thankyou for pointing it out.

Allan from down under.

5 Replies

1029 Views

Last post by Allan
Wed Jul 09, 2025 8:10 pm
WTB - SMALL DRUM REAR AXLE- Found, thank you.

Last post by Sarikatime « Wed Jul 09, 2025 9:53 am
Replies: 3
by Sarikatime » Mon Jun 30, 2025 9:32 am

First post

Want to buy a small drum standard rear axle for my model T.
Frank. Eight one eight two five four six seven nine seven.

Last post

Still looking. Anyone in the Arizona vicinity?

3 Replies

986 Views

Last post by Sarikatime
Wed Jul 09, 2025 9:53 am
Good Used Front Outer Wheel Bearings

Last post by RajoRacer « Tue Jul 08, 2025 12:02 pm
Replies: 6
by RajoRacer » Sun Sep 08, 2024 2:04 pm

First post

Cleaning out some coffee cans and have multiple matched sets of the threaded Timken's available - clean & ready to grease - photos coming soon - $100 pair includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Last post

BTT - price reduction to $75 a set - drop me a note through the Forum, please.

6 Replies

2508 Views

Last post by RajoRacer
Tue Jul 08, 2025 12:02 pm
Brass Phinney-Walker clock Spoken for!

Last post by Layden Butler « Mon Jul 07, 2025 11:26 pm
Replies: 2
by Layden Butler » Mon Jul 07, 2025 6:58 pm

First post

All brass Phinney-Walker keyless ( rim wind and rim set) clock, winds runs and sets properly, no dents cracks or chips, 2 1/2 diameter face. Please respond using MTFCA messaging system.

Last post

Clock is spoken for.

2 Replies

706 Views

Last post by Layden Butler
Mon Jul 07, 2025 11:26 pm
WTB Kelsey outer rim

Last post by Allan « Mon Jul 07, 2025 8:22 pm
Replies: 1
by Larry LaPatka » Mon Jul 07, 2025 7:58 pm

First post

Need a Kelsey outer rim that uses 30 x 3 1/2 tires
And takes the stud bolts holding clips and nuts.
The outer rim has one tab near the valve stem and has the ridge going completely around the outer edge with 4 slits the hold the 4 clips that grip the fellow of the inner wheel. Using for a spare tire.
Thank You MTFCA
LARRY
EMAIL: ltlapatka@gmail.com

Last post

Larry, a second type has a shoulder around the inside diameter of the rim. This shoulder wedges on the outer felloe edge. This type does not have the slits that let water into the rim/tyre assembly. The U shaped clip grip on the shoulder, rather than a cut out. They are interchangeable on the correct wheels. I have found Kelsey branded rims of...

1 Replies

548 Views

Last post by Allan
Mon Jul 07, 2025 8:22 pm
Sold! Master Vibrator New York Coil Co. Brass Era

Last post by GGZ « Sun Jul 06, 2025 11:15 am
Replies: 2
by GGZ » Mon Jun 23, 2025 10:15 pm

First post

Sold to Ed. Thank you. Here is a nice Master Vibrator by the New York Coil Co. in New York. It measures about 3 by 3 by 6 . Terminals Bat-Off-Mag. It says Model T under the key. Very nice condition and complete with the removable key and instructions under the lid. Price is 140.00 including shipping via FedEx Ground within the USA. Email me...

Last post

Sold to Ed! Price reduced to 125.00 including shipping within the USA.

2 Replies

1200 Views

Last post by GGZ
Sun Jul 06, 2025 11:15 am
'26 -'27 fuel tank

Last post by Chad_Marcheese « Sun Jul 06, 2025 10:47 am
Replies: 1
by Chad_Marcheese » Sun Jul 06, 2025 10:45 am

First post

Fuel Tank for 1926 1927 Model T. SOLD

Last post

20250705_195129~2.jpg

20250705_195154~2.jpg

20250705_195203~2.jpg

1 Replies

656 Views

Last post by Chad_Marcheese
Sun Jul 06, 2025 10:47 am
FS: Demountable Rims

Last post by tselliott « Sat Jul 05, 2025 11:57 pm
Replies: 3
by tselliott » Sat Mar 29, 2025 1:39 am

First post

3 really nice demountable rims. These are not Hayes rims but have the fixed lugs, so I guess that makes them the Ford rims. Oddly enough 1 of the rims has Hayes lugs, but it is not a Hayes rim. I don’t know if the lugs are interchangeable between the 2 fixed lug type rims but all the lugs are tight on all the rims. These have been blasted clean....

Last post

All 3 for $280 shipped anywhere in the lower 48

3 Replies

2975 Views

Last post by tselliott
Sat Jul 05, 2025 11:57 pm
Budd wire wheel hubs and caps F/S

Last post by Layden Butler « Sat Jul 05, 2025 6:59 pm

by Layden Butler » Sat Jul 05, 2025 6:59 pm

Pair of front hubs and matching hubcaps for Budd wire wheels 30 x 3 1/2 size. Matched set left and right, good threads and caps. Off an Overland and readily converted to Model T Ford axles either front or rear. $325 for 4 pieces. Please respond thru MTFCA message system.

0 Replies

1038 Views

Last post by Layden Butler
Sat Jul 05, 2025 6:59 pm
WTB Completer 1926 Roadster Top Frame

Last post by J1MGOLDEN « Sat Jul 05, 2025 6:58 pm

by J1MGOLDEN » Sat Jul 05, 2025 6:58 pm

One of our newer club members that lives in Baltimore, MD needs a complete 1926 Roadster Top Frame.

Email Jim Golden for more details.

0 Replies

859 Views

Last post by J1MGOLDEN
Sat Jul 05, 2025 6:58 pm
Top Boot strap end cap

Last post by Original Smith « Sat Jul 05, 2025 12:02 pm
Replies: 5
by Original Smith » Fri Jul 04, 2025 4:58 pm

First post

I want to make a new top boot. I have the strap material, which is 5/8 wide as per original. I can't find the caps which are called C tips too. I used to be able to get them from Mark Cameron, but he must not have any more?

Last post

I am hoping someone may have a jar of these clips laying around? Maybe I'll luck out?

5 Replies

1096 Views

Last post by Original Smith
Sat Jul 05, 2025 12:02 pm
HEAVY connecting rod set ( CHEAP )

Last post by Gene_French « Sat Jul 05, 2025 8:36 am
Replies: 3
by Gene_French » Sun Jun 08, 2025 1:03 pm

First post

for sale : set of early HEAVY type connecting rods for sale ( CHEAP) ... i removed these from the 1st. open valve T engine i worked on 30 years ago ...the babbitt was still very good and i butt ground the caps and ball burnished to STANDARD diameter to restore the fit ... these are too good to throw out and there is very little call to re-babbitt...

Last post

to the top again ..thanks MTFCA

3 Replies

2204 Views

Last post by Gene_French
Sat Jul 05, 2025 8:36 am
valve lifting tool

Last post by Art Ebeling « Sat Jul 05, 2025 5:12 am
Replies: 1
by Allan » Sat Jul 05, 2025 5:06 am

First post

This one is my back-up tool if I ever lost my original. It still has much of the original black paint and works well. These lifters make fitting modern valves with keepers and collects a breeze as they compress the spring without cocking it
$41 with tracked postage to your door. PayPal for payment. 20250705_155236.jpg 9 20250705_155252.jpg
Allan...

Last post

I will take it. Send PM with PayPal info and I will do the same with shipping info. Thanks, Art

1 Replies

579 Views

Last post by Art Ebeling
Sat Jul 05, 2025 5:12 am
Generator parts

Last post by G.ARMS86 « Fri Jul 04, 2025 12:47 pm

by G.ARMS86 » Fri Jul 04, 2025 12:47 pm

Box full of generator parts unknown condition asking 75 or best offer plus shipping please call or text 2036873827

0 Replies

936 Views

Last post by G.ARMS86
Fri Jul 04, 2025 12:47 pm
luggage rack straight SOLD

Last post by Melba Nolan « Thu Jul 03, 2025 9:48 pm
Replies: 7
by Melba Nolan » Mon Oct 28, 2024 7:43 am

First post

For sale: adjustable luggage rack $50 each plus shipping
20241027_132751.jpg 20241027_132529.jpg 20241027_132545.jpg

Last post

37 long x 5 wide x 9 high

7 Replies

2328 Views

Last post by Melba Nolan
Thu Jul 03, 2025 9:48 pm
Wanted Rear Cross Menber with braket for 1922

Last post by Ken Buhler « Thu Jul 03, 2025 9:47 pm
Replies: 1
by Sanary22FT » Thu Jul 03, 2025 5:18 pm

First post

Wanted Rear Cross Menber with braket for 1922 Touring

Thanks a lot

Last post

Stephane,
I have one that is very nice, it has the corner braces and the small brackets on the underside. It is straight and has a clean square spring bolt hole. It will be sand blasted before shipping. Email me to discuss where we can go from here.
Ken Buhler in Kelowna British Columbia Canada.

1 Replies

580 Views

Last post by Ken Buhler
Thu Jul 03, 2025 9:47 pm
Wanted; engine block

Last post by Randy SR « Thu Jul 03, 2025 11:54 am
Replies: 7
by Randy SR » Tue Jun 24, 2025 9:48 pm

First post

I had a catastrophic failure of the #2 rod and I'm now in the market for an engine block for my 1927 Roadster. The current engine is a 1925, my hogs head had the ears cut off by a previous owner,

Last post

I have found an engine block, and can use my old hogs head, even though it has the ears cut off. I'd replace it if I found one in the Portland area for a reasonable price....

7 Replies

1815 Views

Last post by Randy SR
Thu Jul 03, 2025 11:54 am
MODEL T PARTS COLLECTION , CHEAP

Last post by big2bird « Thu Jul 03, 2025 9:52 am
Replies: 10
by Chaffins » Fri Nov 25, 2022 5:54 pm

First post

THIS A 60 YEAR COLLECTION OF MODEL T FORD PARTS. THERE IS NO JUNK PARTS, THEY ARE ALL GOOD USEABLE PARTS. THIS IS A GIVE AWAY PRICE.
PRICES SHOWN ARE FAIR MARKET VALUE, THIS IS WHAT YOU CAN SELL THE PARTS FOR.
ASKING PRICE IS LESS THAN 0.060 CENTS ON THE DOLLAR
BUYER MUST BUY ENTIRE COLLECTION TO GET THESE PRICES

YOU WON’T FIND ANY LOWER...

Last post

Thank you Mark

10 Replies

5788 Views

Last post by big2bird
Thu Jul 03, 2025 9:52 am
1912 Holley carburetor/sold

Last post by Corey Walker « Thu Jul 03, 2025 1:35 am

by Corey Walker » Thu Jul 03, 2025 1:35 am

Completely disassembled and cleaned, new venturi, float, choke spring, viton tipped needle and seat, throttle shaft bushing installed, test run. $600 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

998 Views

Last post by Corey Walker
Thu Jul 03, 2025 1:35 am
Miniature Ford Times Magazines

Last post by ShaneKerry « Wed Jul 02, 2025 12:03 pm

by ShaneKerry » Wed Jul 02, 2025 12:03 pm

Miniature Ford Times Magazines (measurements: 5”x7”)for sale - (1959 all 12 months) and ( 1957 October, November and December)
All for $20 plus shipping. IMG_6389.jpeg IMG_6390.jpeg
Call 740-398-4358 for more information.

0 Replies

887 Views

Last post by ShaneKerry
Wed Jul 02, 2025 12:03 pm
Stevens T-80 U-Joint Tongs ***SOLD***

Last post by Jeepbone1 « Wed Jul 02, 2025 11:08 am
Replies: 3
by Jeepbone1 » Fri Jun 20, 2025 8:31 pm

First post

Very nice set of Stevens U-Joint Tongs for sale. $225 shipped. Call or text any time. 54zero76one2three03. No forum messages/emails please. They tend to get lost. PayPal F/F preferred.

Brad

Last post

SOLD!

Thanks MTFCA!

3 Replies

1677 Views

Last post by Jeepbone1
Wed Jul 02, 2025 11:08 am
WTB Spare tire Cover 21 Black

Last post by Kuffs565 « Wed Jul 02, 2025 10:41 am
Replies: 3
by Kuffs565 » Tue Jul 01, 2025 7:54 pm

First post

I'm looking to buy a 21 inch Ford Model T spare tire cover in black. If anyone has one or knows where I can get a black one please let me know.
Thanks

Last post

Pretty sure I have one left - black/Ford script.

Sent you an email!

3 Replies

737 Views

Last post by Kuffs565
Wed Jul 02, 2025 10:41 am
FS- Jno W Brown # 110 Side Lights/ Right and Left Pair

Last post by Dennis Fleming « Wed Jul 02, 2025 7:42 am
Replies: 2
by Dennis Fleming » Thu Jun 26, 2025 5:24 pm

First post

Here is a nice straight pair of unrestored Jno W Brown Side lights. One broken glass lens and a small pin hole in one oil tank. Correct for 1913 - 1914. $225.00 plus shipping for the pair IMG_2181.jpeg IMG_2182.jpeg IMG_2183.jpeg IMG_2184.jpeg

Last post

These are still available.
Thanks

2 Replies

1045 Views

Last post by Dennis Fleming
Wed Jul 02, 2025 7:42 am
Wanted Dayton number 3 knock on hub cap as in photos

Last post by Mark Herdman « Wed Jul 02, 2025 12:31 am

by Mark Herdman » Wed Jul 02, 2025 12:31 am

Wanted Dayton number 3 knock on hub cap as in photos. Plan on making a pattern to cast them for my Fronty Ford. Any help appreciated

Thanks

Mark

359246 10-08-2011 Dayton Knock Off Hub Cap.jpg

2018-03-10 Dayton #3 Knock Off Wheel Caps 027549.jpg

Have made Dayton dental drive #10 caps from scratch before so know the process.

2002-05-06...

0 Replies

872 Views

Last post by Mark Herdman
Wed Jul 02, 2025 12:31 am
Wanted, Bosch Magneto Plate

Last post by Mark Herdman « Wed Jul 02, 2025 12:20 am
Replies: 17
by Mark Herdman » Thu Aug 29, 2024 9:30 pm

First post

Wanted, a Bosch Magneto setup that replaces the Generator.

2018-01-06 Bosch Magneto plate 026248.jpg

Last post

Thanks for the update, Kevin. Be nice to find some wheel centres.

17 Replies

3355 Views

Last post by Mark Herdman
Wed Jul 02, 2025 12:20 am
FS Original Ford Service Manual Hardbound SOLD

Last post by T4Tom « Tue Jul 01, 2025 10:42 pm
Replies: 3
by Humblej » Tue Jul 01, 2025 1:21 pm

First post

For Sale: Original Hard Bound Ford Service Manual, dated 1926. This is the good one, it is a little bigger and the pictures are much clearer than the reprints. In great condition, sound binding, very clean cover, very clean pages, no greasy fingerprints here, no missing pages, no dog ears, no funky smell. One of the best condition original manuals...

Last post

Thanks, Jeff!

I will send you a check for the book tomorrow.

Thanks for making this available.

Tom

3 Replies

806 Views

Last post by T4Tom
Tue Jul 01, 2025 10:42 pm
Help Please. I need a engine. WTB

Last post by Rjackson « Tue Jul 01, 2025 10:20 pm
Replies: 1
by bobt » Sun Jun 22, 2025 5:37 pm

First post

Hello. I would like to buy a rebuilt or a great running used engine for my 1915 touring. I'm pretty sure all years will fit. I love driving my 15 and I feel like I'm running out of time. Any info will help. thanks, bobt

Last post

I do have a 1915 engine just finishing the rebuild.
Call me at 7202204744 and we can talk. I am in Colorado

1 Replies

1312 Views

Last post by Rjackson
Tue Jul 01, 2025 10:20 pm
WTB 1911 Steering Column

Last post by uk2lax « Tue Jul 01, 2025 9:37 pm
Replies: 3
by Tbird » Sun Jun 01, 2025 12:35 pm

First post

I'm looking for a 1911 steering column. The column length should be 23 1/2 . I have a very nice, complete 1912 column with the offset hole to trade if need to (depending on condition/completeness of your column).
mikebird@lifeattheridge.net

IMG_6468.jpeg IMG_6469.jpeg IMG_6470.jpeg IMG_6479.jpeg IMG_6472.jpeg

Last post

I'm in need of 1912 steering column if you want to sell yours? What length is yours?

3 Replies

1322 Views

Last post by uk2lax
Tue Jul 01, 2025 9:37 pm
Perfecto spare carrier/ Sold

Last post by big2bird « Tue Jul 01, 2025 2:57 pm
Replies: 2
by big2bird » Tue Jul 01, 2025 1:51 pm

First post

20250701_102943.jpg 20250701_102949.jpg 20250630_140141.jpg

Perfecto side mount spare tire carrier. Mounts to slant windshield post. With brkt., you can still have side lights.
I do NOT have the running board piece. Simple 1/8 strap to make one.
It MAY mount to earlier posts, but I do not know 100%.

$175.00. $10 ship to lower 48.
PM or email...

Last post

Sold to Scott. Thank you MTFCA

2 Replies

747 Views

Last post by big2bird
Tue Jul 01, 2025 2:57 pm
Model T belt buckle F S

Last post by elliott1936 « Tue Jul 01, 2025 1:36 pm
Replies: 4
by elliott1936 » Fri Jun 27, 2025 7:24 pm

First post

Early style Model T roaster belt buckle for sale $25.00 plus the postage Five 03- 644-937Four Tom

Last post

I don't know what happened with the picture, but the belt buckle doesn't look like the wheel is out of position.

4 Replies

1228 Views

Last post by elliott1936
Tue Jul 01, 2025 1:36 pm
FS differential carriers

Last post by ryanpad « Tue Jul 01, 2025 12:41 pm
Replies: 3
by Karl Von Neumann » Sat Oct 05, 2024 12:39 pm

First post

For sale 3 differential carriers used fresh off the barn shelf with Spiders inside and used ring gears 94$ each shipped if you buy more that one we can figure out shipping

Last post

Do you have any of those still?

I always have these on hand this is a old post ill have to look and see if I have these specificly

Thanks Karl, it doesn’t have to be one of the ones pictured.

3 Replies

1744 Views

Last post by ryanpad
Tue Jul 01, 2025 12:41 pm
Brake and Reverse Pedal shaft

Last post by Melba Nolan « Tue Jul 01, 2025 3:39 am
Replies: 4
by Melba Nolan » Sun Dec 31, 2023 9:55 pm

First post

For sale: New in original package one Brake and Reverse Pedal shaft. part #T3435 1909-1927
$10 plus postage

Last post

move to top

4 Replies

1372 Views

Last post by Melba Nolan
Tue Jul 01, 2025 3:39 am
FS model T jack SOLD

Last post by fordrelic « Tue Jul 01, 2025 2:37 am
Replies: 2
by fordrelic » Mon Jun 30, 2025 8:30 pm

First post

For Sale: Model T jack.

$45 includes shipping to lower 48.

Last post

Spoken for. Thanks Richard.

2 Replies

649 Views

Last post by fordrelic
Tue Jul 01, 2025 2:37 am
WTB 26/27 engine/trans

Last post by NoelChico « Mon Jun 30, 2025 6:03 pm
Replies: 4
by RoadMoyer » Sat Jun 28, 2025 9:54 am

First post

Rebuilding a 26 Tudor with my dad. It has a working engine/trans but they are not the 26/27 style. Current engine has no stamp on it so not sure it’s vintage. I’m trying to figure out how to find the right style engine to see if it’s worth replacing now or waiting until I have issues with this one. Dad has a 23 to restore next so I could use my...

Last post

If your current engine runs well, I'd use it until it quits. In the meantime, either look for a GOOD engine or have one rebuilt. I've got 2 running 26 engines, the first of which I'm taking out of my 16 to make it correct. HOWEVER, it has cast iron pistons (not a problem), 2-piece valves that tend to come apart and wreck pistons, loose rods and...

4 Replies

1158 Views

Last post by NoelChico
Mon Jun 30, 2025 6:03 pm
SOLD 1911-12 Original Ford Script Transmission Door

Last post by KWTownsend « Mon Jun 30, 2025 3:10 pm
Replies: 1
by Tparts » Mon Jun 30, 2025 12:35 pm

First post

This original transmission cover door has been glass beaded and has some pitting as seen in the photos. Inspector mark ( P ) can still be seen. It will work as designed. $125.00 plus shipping.
Lang’s
1-800-872-7871

Last post

1911
The 1912 door includes: MADE IN USA stamped under the script.

Nice.

1 Replies

663 Views

Last post by KWTownsend
Mon Jun 30, 2025 3:10 pm
5 kw rebuilt coils 1913-1915

Last post by Algonac27 « Mon Jun 30, 2025 12:46 pm
Replies: 1
by Algonac27 » Fri Jun 20, 2025 4:39 pm

First post

5 coils purchased last year at the international tour rebuilt by Ron Patterson should be for a 13-15
525.00 located in Algonac,MI.

Last post

Make offer

1 Replies

1408 Views

Last post by Algonac27
Mon Jun 30, 2025 12:46 pm
WTB…1914 coil box lid

Last post by RajoRacer « Mon Jun 30, 2025 10:35 am
Replies: 1
by WorldChamp1914 » Mon Jun 30, 2025 12:34 am

First post

I have a friend who is not on the forum looking for a 14 lid….it’s straight not angled like 15…..Thanks.

Last post

I have an aftermarket one - drop me a note, Gary.

1 Replies

571 Views

Last post by RajoRacer
Mon Jun 30, 2025 10:35 am
FS: Rare Antique Buffalo Forge No. 13 Bench Top Drill Press

Last post by KellyJons « Sun Jun 29, 2025 11:17 pm

by KellyJons » Sun Jun 29, 2025 11:17 pm

This ad is for the exceptionally rare Buffalo Forge No. 13 bench top drill press, a tool that would look fantastic in your vintage car workshop.

This machine was manufactured by Buffalo Forge sometime in the late nineteen forties, near as I can figure. Other than a bit of surface rust, everything looks great and functions as it should. It runs...

0 Replies

1159 Views

Last post by KellyJons
Sun Jun 29, 2025 11:17 pm
Looking for apco spring wishbone cap and a hand horn

Last post by Tparts « Sun Jun 29, 2025 10:02 pm
Replies: 3
by LittleTimmy52 » Sat Jun 28, 2025 2:18 pm

First post

Edit: after correcting my error, I don't need another drag link spring cap.

I can't seem to find the drag link cap, it's discontinued where ever I see it posted, but I don't mind used. The horn I'm looking for is the side mounted klaxon hand horn the aoogah one with the rod you press down or forward to make it sound. And lastly, the apco spring...

Last post

We have some available
1-800-872-7871
Lang’s

3 Replies

906 Views

Last post by Tparts
Sun Jun 29, 2025 10:02 pm
WTB lecalite junior headlight lens - no longer looking

Last post by 1925 Touring « Sun Jun 29, 2025 3:13 pm

by 1925 Touring » Sun Jun 29, 2025 3:13 pm

Looking for Lecalite junior headlight lens. Lens rattled loose and fell off car. :cry: I would like to find a replacement. If you have a set of 2 and don't want to seperate, I'll take both.
Thanks!
Lens says Top- lecalite junior - 8 1/8 - pat. 12-12-16, 5-1-17
20250628_203504.jpg
20250628_203512.jpg

0 Replies

1009 Views

Last post by 1925 Touring
Sun Jun 29, 2025 3:13 pm
Late 1925 Dashboard

Last post by Original Smith « Sun Jun 29, 2025 2:59 pm

by Original Smith » Sun Jun 29, 2025 2:59 pm

WTB: A late 1925 open car dashboard. They look quite similar the the early ones, but are different. The hole for the carburetor adjustment is 1/16 larger diameter, and the indentation is different too.

0 Replies

1002 Views

Last post by Original Smith
Sun Jun 29, 2025 2:59 pm
SOLD. Chicago Transmission for Sale

Last post by troutjohn « Sun Jun 29, 2025 12:43 pm
Replies: 9
by troutjohn » Tue Jun 10, 2025 3:56 pm

First post

Chicago 3 Speed Transmission for Sale. Very Similar to Warford. Fits in the car same as a Warford. Iron case. Works and came out of running car. Owner wanted a new Warford. All parts as shown. Missing the nob. $250 plus shipping. Located in SE PA.

John Trout

Last post

Trans is sold. Thanks MTFCA.

9 Replies

2342 Views

Last post by troutjohn
Sun Jun 29, 2025 12:43 pm
; Sold, 1912/1913 Engine block.

Last post by Bill Everett « Sun Jun 29, 2025 12:04 pm
Replies: 2
by jelenbaas » Sat Jun 28, 2025 11:23 pm

First post

Block casting date 9-17-12. S/N 170010
Deck has small crack professionally repaired. Former owner advised slight water weep on adjacent bolt holes. Bore measures 3.8 approximately. Main bearings babbit is new. No main caps, however have unbabbited caps available.
Asking $500, will be attending MTFCA national tour at Stetler Ab, with delivery...

Last post

E-Mail sent.

2 Replies

814 Views

Last post by Bill Everett
Sun Jun 29, 2025 12:04 pm
Sold; Late 1912/Early 1913 ,Teacup, 7 rivet oilpan.

Last post by Bill Everett « Sun Jun 29, 2025 12:04 pm
Replies: 3
by jelenbaas » Sat Jun 28, 2025 8:38 pm

First post

Pan has been professionally checked for straightness on KRW pan jig. 7 rivet arms appear to have been replaced at some time. Tea cup is straight with good threads.
Asking $500, will be attending MTFCA national tour at Stetler Ab, with delivery there or other locations between there and Spokane.

Last post

E-Mail sent.

3 Replies

901 Views

Last post by Bill Everett
Sun Jun 29, 2025 12:04 pm
Nevermind sorry.

Last post by LittleTimmy52 « Sun Jun 29, 2025 12:01 pm

by LittleTimmy52 » Sun Jun 29, 2025 12:01 pm

Edit: my horn is the correct one, another user of this forum elaborated on why it wasnt working and I fixed it. Since I do infact have the correct horn I no longer need to buy one.

I have a magneto horn that has 2 contacts, one insulated from the horns body, the other is not and had continuity with the horns body. My t actuates the horn by...

0 Replies

947 Views

Last post by LittleTimmy52
Sun Jun 29, 2025 12:01 pm
WTB 30x3 rim or wheel

Last post by Wayne Mims « Sat Jun 28, 2025 10:54 pm
Replies: 3
by old_charley » Sun Jun 22, 2025 2:04 pm

First post

Hi. I'm in need a a nice 30x3 wood fellow rim. I'm having the wheels for my '13 re-wooded. One of my fronts is useable but the bead has a couple of less than ideal spots. I'd like to find a better one. I'd also be fine with a complete wheel with questionable wood. Whaddaya got? Reasonably close to Prescott, AZ would be great, but I'm happy to pay...

Last post

I have a real nice set of 30 x 3 square wood fellow wheels. I'm willing to part with, but not just one. I think I'm coming out to Phoenix the end of July 1 of August, so something could be arranged there. I belong to the club so you can get my information from them. Have a nice day.

3 Replies

1097 Views

Last post by Wayne Mims
Sat Jun 28, 2025 10:54 pm
SOLD - Line Shaft & Machinery & Farm Drive Belt Hooks

Last post by BE_ZERO_BE « Sat Jun 28, 2025 9:02 pm
Replies: 4
by BE_ZERO_BE » Sat Jun 28, 2025 5:04 am

First post

Sold - New Line Shaft, Machinery & Tractor Drive Belt Hooks
Used to splice leather drive belts for machinery and farm equipment.
Includes tool to install.

$50 OBO + Shipping

IMG_1575.JPG

IMG_1576.JPG

Last post

Item has been sold.
Thank you MTFCA

4 Replies

918 Views

Last post by BE_ZERO_BE
Sat Jun 28, 2025 9:02 pm
WTB Small drum rear axle assembly

Last post by Sarikatime « Sat Jun 28, 2025 8:52 pm
Replies: 3
by old_charley » Fri May 30, 2025 11:28 am

First post

Hey everybody.
I'm helping a friend out in looking for a small drum rear axle assembly. He's removing a Ruckstell for another project and wants to replace it with a standard rear. He'd like to find a complete assembly, torque tube, radius rods that's in good internal condition, ready to install without having to disassemble and re-do. We're in...

Last post

If you have one rear axle that you don’t need, please speak up.

3 Replies

1653 Views

Last post by Sarikatime
Sat Jun 28, 2025 8:52 pm
FS: '17-'23 Fenders, Hood, Shell, Turtle -- NOS, exc. orig., and repro.

Last post by JonLong55 « Sat Jun 28, 2025 7:45 pm
Replies: 4
by Walter Higgins » Mon Feb 24, 2025 11:03 pm

First post

As mentioned in the subject, I'm selling an assortment of very nice sheet metal that was purchased for a 1920 roadster project that never materialized. All of it is very much above average. There are a few photos below. Email or PM me through my profile with your email address and I'll send a link to an album where you can see all the photos and...

Last post

I'm interested in the fenders. They appear to be in much better shape than mine.

4 Replies

1760 Views

Last post by JonLong55
Sat Jun 28, 2025 7:45 pm
Looking for a rear axle brace for a 26

Last post by TRDxB2 « Sat Jun 28, 2025 2:30 pm
Replies: 7
by Reno Speedster » Fri Jun 27, 2025 8:13 pm

First post

As the title says, I am looking for a rear axle brace that will fit on a 26-27 rear end. Let me know if you have one and what you would like for it.

Last post

Shows pictures og different styles & the original attachment that goes on the pumpkin

This is a DIY setup for all part but the pumpkin part is of interest
truss diy.jpg

These pictures are from another links
pumpkin bracket.jpg

7 Replies

1071 Views

Last post by TRDxB2
Sat Jun 28, 2025 2:30 pm
Wanted: 28x3 Non-Skid tires

Last post by Mike Lebsack-Iowa « Sat Jun 28, 2025 12:12 pm
Replies: 2
by Mike Lebsack-Iowa » Fri Jun 27, 2025 5:10 pm

First post

I am looking for a good set of usable but worn Non-Skid tires for a motorcycle restoration. White or black is fine. Will be ridden very very little so not going down any roads or highways. Will be used on an original bike so don’t want anything looking new on it. Please PM me. Thanks, Mike

Last post

Email sent.

2 Replies

699 Views

Last post by Mike Lebsack-Iowa
Sat Jun 28, 2025 12:12 pm
Sold Early fenders and splash aprons

Last post by G.ARMS86 « Sat Jun 28, 2025 11:22 am
Replies: 7
by G.ARMS86 » Fri Jun 27, 2025 5:49 am

First post

[imag IMG_5689.png e] Sold thank you everyone For sale early fenders and splash aprons. The fenders are in ok shape and the splash aprons are in rough shape asking 250 or best offer. Located in Connecticut but can bring to the Minnesota MTFCI tour you can call or text me 2036873827 thank you

Last post

Sold thank you everyone For sale early fenders and splash aprons. The fenders are in ok shape and the splash aprons are in rough shape asking 250 or best offer. Located in Connecticut but can bring to the Minnesota MTFCI tour you can call or text me 2036873827 thank you

7 Replies

1233 Views

Last post by G.ARMS86
Sat Jun 28, 2025 11:22 am
FS - .015 single lock lifters

Last post by tom leroux « Fri Jun 27, 2025 10:49 pm
Replies: 6
by t-time » Wed Apr 23, 2025 9:56 am

First post

New set of + .015 single lock lifters $110 includes US shipping.

Last post

mark
please send your address again
sorry tom

6 Replies

1870 Views

Last post by tom leroux
Fri Jun 27, 2025 10:49 pm
Hand air pump for speedster gas tank F/S

Last post by Layden Butler « Fri Jun 27, 2025 7:49 pm
Replies: 1
by Layden Butler » Fri Jun 27, 2025 7:48 pm

First post

Instrument panel mounting with proper large nut, no dents or repairs, works fine, $150 including 48 state domestic shipping. Contact me thru MTFCA messaging. Also new in box 2 1/2 face gauge, 5 PSI, $25 free shipping with the pump.

Last post

Gauge pictures:

1 Replies

662 Views

Last post by Layden Butler
Fri Jun 27, 2025 7:49 pm
Gas headlamp burners SOLD

Last post by Layden Butler « Fri Jun 27, 2025 7:18 pm

by Layden Butler » Fri Jun 27, 2025 7:18 pm

Pair of used original gas headlamp burners in good shape ready to use. Remember that these are NOT being reproduced! Please reply by MTFCA messaging.

0 Replies

1016 Views

Last post by Layden Butler
Fri Jun 27, 2025 7:18 pm
Riveted axle housings and two speed Jumbo driveshaft

Last post by baltrusch « Fri Jun 27, 2025 1:52 pm

by baltrusch » Fri Jun 27, 2025 1:52 pm

1913-14 riveted rear axle housings with two speed Jumbo driveshaft. It worked well on the car but I think the Jumbo output shaft needs to be shimmed. This provides a nearly hidden two speed while retaining the riveted housing of the early cars. Might deliver to Stettler or pick it up in Great Falls, MT on the way. $500 obo.

0 Replies

1207 Views

Last post by baltrusch
Fri Jun 27, 2025 1:52 pm
5:1 Steering Columns

Last post by baltrusch « Fri Jun 27, 2025 1:45 pm

by baltrusch » Fri Jun 27, 2025 1:45 pm

For Sale: Several 5:1 26-27 steering columns. You can use the main shaft, the gears, and the steering wheel shaft to convert the older units and improve your steering. I might be able to deliver them to Stettler or you can stop in Great Falls, MT, along the way and pick one up! $150 ea.

0 Replies

1147 Views

Last post by baltrusch
Fri Jun 27, 2025 1:45 pm
Free: 17-25 Steering Quadrants and Gear Covers + Misc

Last post by Rodger Erickson « Fri Jun 27, 2025 12:32 pm

by Rodger Erickson » Fri Jun 27, 2025 12:32 pm

Free: A bunch of rusty Throttle & Spark quadrants, along with some gear box tops and some levers and gears. These are pretty marginal - if I had any common sense I'd put them out for the scrap collectors, but I don't so here they are. Free if you pay for shipping.

tquad01.jpg

tstgr01.jpg

Thanks for looking!

0 Replies

980 Views

Last post by Rodger Erickson
Fri Jun 27, 2025 12:32 pm
Nylon timing gears

Last post by Mark Gregush « Fri Jun 27, 2025 12:25 am
Replies: 2
by Melba Nolan » Thu Jun 26, 2025 10:54 pm

First post

For sale: Nylon timing gears. Choice $15 each plus postage
20241119_131519.jpg

Last post

Not nylon, they are fiber gears. Not Model T or A (or B).

2 Replies

771 Views

Last post by Mark Gregush
Fri Jun 27, 2025 12:25 am
wheel SOLD

Last post by Melba Nolan « Thu Jun 26, 2025 10:16 pm
Replies: 5
by Melba Nolan » Mon Mar 24, 2025 4:44 pm

First post

For sale: 30 x 3 1/2 clincher demountable wheel $200 plus shipping

20250318_135017.jpg 20250318_134922.jpg 20250318_135105.jpg 20250408_163516.jpg

Last post

sold pending payment

5 Replies

3896 Views

Last post by Melba Nolan
Thu Jun 26, 2025 10:16 pm
SOLD. FS - Cast Tail light and license plate bracket w/ light and red lens

Last post by Dennis Fleming « Thu Jun 26, 2025 6:04 pm

by Dennis Fleming » Thu Jun 26, 2025 6:04 pm

Nice straight bracket w good tail light and lens. $40.00 plus shipping IMG_2191.jpeg IMG_2192.jpeg

0 Replies

1073 Views

Last post by Dennis Fleming
Thu Jun 26, 2025 6:04 pm
WTB

Last post by Dollisdad « Thu Jun 26, 2025 5:01 pm

by Dollisdad » Thu Jun 26, 2025 5:01 pm

Looking for 5 30X3 1/2 tires. Must be a matched set, good enough to put on the road. Not interested in ancient cracked wanta be tires. Something you got for a project and never used type tires. Thanks.

0 Replies

1114 Views

Last post by Dollisdad
Thu Jun 26, 2025 5:01 pm
SOLD F/S- Alemite pin type and zerk fitting assortment 70 pcs.

Last post by Dennis Fleming « Thu Jun 26, 2025 4:47 pm

by Dennis Fleming » Thu Jun 26, 2025 4:47 pm

Lot of pin type and a few zirk grease fittings and a couple pin type caps. There are a few nos pin type in the bunch. Whole lot $40.00 plus shipping. IMG_2177.jpeg IMG_2178.jpeg IMG_2180.jpeg

0 Replies

1016 Views

Last post by Dennis Fleming
Thu Jun 26, 2025 4:47 pm
WTB Pair of 1914 T Splash Shields

Last post by Tim Hansen « Thu Jun 26, 2025 1:10 pm

by Tim Hansen » Thu Jun 26, 2025 1:10 pm

Looking for a pair of 1914 Touring Splash Shields.

Thanks

Tim

0 Replies

989 Views

Last post by Tim Hansen
Thu Jun 26, 2025 1:10 pm
E & J gas headlamp burner stand SOLD

Last post by Wayne Mims « Wed Jun 25, 2025 12:10 am
Replies: 1
by Layden Butler » Mon Jun 16, 2025 4:05 pm

First post

Original stand in nice unrestored condition. SOLD

Last post

I have you sold the burners yet if not, I'll buy them give me a call at 512 nine95 six013. wayne

1 Replies

1378 Views

Last post by Wayne Mims
Wed Jun 25, 2025 12:10 am
Model T Ford Sign - $20 plus shipping - Made out of welded hex nuts

Last post by sprobst « Tue Jun 24, 2025 7:03 pm
Replies: 1
by sprobst » Tue Jun 24, 2025 3:37 pm

First post

Model T Ford Sign - Made out of welded hex nuts

IMG_4106.jpg

$20 plus shipping

------
If you are interested, please send me a direct message with your zip code. I will calculate how much shipping is.

Last post

Sold. Thanks.

1 Replies

886 Views

Last post by sprobst
Tue Jun 24, 2025 7:03 pm
FS Standing Forming Dolly/Buck

Last post by Henry K. Lee « Tue Jun 24, 2025 6:33 pm
Replies: 1
by Henry K. Lee » Tue Jun 24, 2025 6:32 pm

First post

These are a must for fender straightening, motorcycle parts forming, etc. This is a Cadillac one...., $500.00 you pick up! four23eight3seven5seven09!!!!!!

IMG_4503.jpeg

IMG_4502.jpeg

IMG_4501.jpeg

IMG_4504.jpeg

IMG_4506.jpeg

Last post

IMG_4505.jpeg

1 Replies

868 Views

Last post by Henry K. Lee
Tue Jun 24, 2025 6:33 pm
FS Great Single Axle Trailer..., Can Haul a Model T

Last post by Henry K. Lee « Tue Jun 24, 2025 6:28 pm

by Henry K. Lee » Tue Jun 24, 2025 6:28 pm

A great single axle trailer with hydraulic surge brakes, serious ply tires (new), ramps, extra European diamond plate, just remove the the side stakes and a T fits on it! Pulls like a dream! $1,000.00 you pick up! Has a Tennessee title! four23eight3seven5seven09.

IMG_4702.jpeg

IMG_4701.jpeg

IMG_4703.jpeg

0 Replies

1283 Views

Last post by Henry K. Lee
Tue Jun 24, 2025 6:28 pm
Victor Dual Tail Light/Tag Bracket SOLD

Last post by Drew Wommack « Tue Jun 24, 2025 4:39 pm
Replies: 2
by Jeepbone1 » Fri Jun 20, 2025 8:39 pm

First post

Very nice Victor electric dual tail light for sale. Functions as it should. Top lense is amber. $300 shipped. Call or text any time. 54zero76one2three03. No forum messages/emails please. They tend to get lost. PayPal F/F preferred.

Brad

*****SOLD*****

Last post

Suprised that this hasn't sold....these Cincinnati Victor lights are pretty rare. The $300 was a good price and $250 a bargain. This is a great period correct accessory for the 'cup' tailight introduced during 1924 production and used through '27. The amber lense on top provided a stop light (with the use of the bendix cover mounted switch) and...

2 Replies

1266 Views

Last post by Drew Wommack
Tue Jun 24, 2025 4:39 pm
FS dash choke pull

Last post by Karl Von Neumann « Tue Jun 24, 2025 11:20 am
Replies: 1
by Karl Von Neumann » Wed May 28, 2025 11:46 am

First post

Dash choke pull 2 have the fire wall levers all are decent shape 10 each plus the ride

Last post

Move to top

1 Replies

1585 Views

Last post by Karl Von Neumann
Tue Jun 24, 2025 11:20 am
FS hood shelves

Last post by Karl Von Neumann « Tue Jun 24, 2025 11:20 am
Replies: 3
by Karl Von Neumann » Wed May 28, 2025 11:54 am

First post

Hood shelves pair in primer 50$ plus the ride fits 17 to 25. Rest are singles 15 each plus the ride

Last post

Move to top

3 Replies

1207 Views

Last post by Karl Von Neumann
Tue Jun 24, 2025 11:20 am
For Sale: More Stuff !

Last post by RajoRacer « Tue Jun 24, 2025 11:16 am
Replies: 5
by RajoRacer » Fri Jun 13, 2025 8:29 pm

First post

I'm parting with more stuff - assorted explosion whistle adapters - 2 homemade - $40 all three.

Limited supply of generator 3rd brush repair kits - $20.

3 Atwater-Kent LA distributors, mostly complete, no cracks, good gears & 1 Bosch 600 - no cap but good rotor - $150 for all 4 !

Accessory aluminum hot air pipes - one complete - one missing the...

Last post

BTT - open to offers !

5 Replies

2210 Views

Last post by RajoRacer
Tue Jun 24, 2025 11:16 am
FS 1926 headlights

Last post by Texasroadkill « Tue Jun 24, 2025 9:39 am
Replies: 2
by SleepyT » Sun May 25, 2025 10:17 pm

First post

1926 headlights good condition, original brass headlight rings and H lens. Reduced to 80$ obo plus shipping. 928.863.8375

Last post

Wherabouts?

2 Replies

1488 Views

Last post by Texasroadkill
Tue Jun 24, 2025 9:39 am
aeromotor whistle parts

Last post by Art Ebeling « Tue Jun 24, 2025 8:30 am
Replies: 2
by Art Ebeling » Tue Jun 10, 2025 8:33 am

First post

Aeromoter whistle, cutout and pedal. 225.00 If you want the complete exhaust with whistle and pedal 275.00 but not sure how to ship it. Art

Last post

Gary, I just saw you question and checked the valve. It is stuck, I will try to free it up and post the result. Thanks, Art

2 Replies

1669 Views

Last post by Art Ebeling
Tue Jun 24, 2025 8:30 am
For Sale: set of white tires

Last post by kanecharles « Tue Jun 24, 2025 12:04 am
Replies: 4
by Mike Lebsack-Iowa » Thu May 29, 2025 7:38 pm

First post

I have a set of 4 new Wards Riverside tires, 2-30x3.5 and 2-30x3.0
They were purchased new and put on an early car but of coarse the turned brown shortly thereafter. That said they are brownish in color, all of them. They are nice and pliable and usable but “not bright white”. I would like $250 for the complete set of 4 which is much less than...

Last post

What a pity! I wish I had seen the article sooner. I was also looking to buy Wards Riverside tires iq test free

4 Replies

1750 Views

Last post by kanecharles
Tue Jun 24, 2025 12:04 am
Runningboard Tanks

Last post by schwabd1 « Mon Jun 23, 2025 11:30 pm

by schwabd1 » Mon Jun 23, 2025 11:30 pm

491547185_1571396800223045_4805122552221510944_n.jpg .

Saw on Facebook Marketplace in Lawrenceburg, Indiana. $275.00. Thought someone might be interested,

0 Replies

1217 Views

Last post by schwabd1
Mon Jun 23, 2025 11:30 pm
Wanted turtle deck

Last post by perry kete « Mon Jun 23, 2025 8:15 pm
Replies: 4
by John L » Mon Jun 16, 2025 8:36 am

First post

I need the turtle deck assembly for a 1923 coupe with suicide doors. This is an early 23 which has the deck assembly separate from the main body.

Last post

This is a picture of a '22 Coupe turtle deck. The early '23 would be similar.

IMG_0051.JPG

Model T-'22 Coupe framework rear-Denny's.jpg

4 Replies

1500 Views

Last post by perry kete
Mon Jun 23, 2025 8:15 pm
KR Wilson engine stand

Last post by Mark Gregush « Mon Jun 23, 2025 7:03 pm
Replies: 2
by Junk poor » Sun Jun 22, 2025 11:18 pm

First post

Saw this on Facebook Marketplace. I can’t post a link, as I don’t have nor do I want Facebook. Located in Cedar Rapids Ia.

IMG_9898.png

Last post

If you found it all you have to do is open the window to view, then copy and paste the address from the search box.

2 Replies

1205 Views

Last post by Mark Gregush
Mon Jun 23, 2025 7:03 pm
*Brand New* Starter Field Coil Kit - FINALLY!

Last post by AdminJeff « Mon Jun 23, 2025 6:12 pm
Replies: 11
by AdminJeff » Wed Jun 18, 2025 1:08 pm

First post

After over a year of work, I finally have my brand new Model T Starter field coils completed and ready to ship. They come with everything I also make to get the job done right.

I got tired of spending over $100 on the Wilson field coils so now I make them. These are replicas of the original Model T field coils but are superior to the aftermarket...

Last post

Installation instructions:

11 Replies

2554 Views

Last post by AdminJeff
Mon Jun 23, 2025 6:12 pm
DB rods FS LOWER PRICE

Last post by Dan Hatch « Mon Jun 23, 2025 1:51 pm
Replies: 6
by Dan Hatch » Sun Oct 09, 2022 1:54 pm

First post

Here is a set of DB rods that I was saving, for what I don’t know. Just you don’t see them very often. They are heavy rods, but they were made by John and Horace aka the Dodge Brothers. You can put these rare rods on your shelf for just $35+ shipping. Email me at address in pictures. Thanks Dan
4D5315B1-21BA-4635-B070-0106C68986ED.jpeg...

Last post

Sold pending payment

6 Replies

2504 Views

Last post by Dan Hatch
Mon Jun 23, 2025 1:51 pm
Steel Truss Head Rivets 3/16" x 1"

Last post by blauvelt « Mon Jun 23, 2025 1:37 pm
Replies: 16
by Rodger Erickson » Fri Feb 10, 2023 10:57 am

First post

Free: I still have a whole bunch of Truss Head (or mushroom head or brazier head) rivets, with a 3/16 x 1 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or depot hack...

Last post

I’ll throw in for a small flat rate box.

16 Replies

4206 Views

Last post by blauvelt
Mon Jun 23, 2025 1:37 pm
STEVEN'S TRANSMISSION BUSHING DRIVER SET (LIQUIDATION SALE)

Last post by Mark Chaffin « Mon Jun 23, 2025 12:45 pm
Replies: 5
by Mark Chaffin » Fri Feb 16, 2024 7:02 pm

First post

We are currently in the process of reproducing a complete and very limited run of STEVENS Transmission Bushing Driver Sets. Each set is an exact reproduction of a very nice original set and will include a storage box made of fine hardwood. The tools are all made of 4140 tool steel to give lasting service and finished in dark black oxide. Quantity...

Last post

This was a fun project. We have a few sets remaining. If you rebuild transmissions, you need this tool set. Liquidation price (our cost) $1,000 while supplies last. Mark Chaffin (951) 805-0928

5 Replies

1955 Views

Last post by Mark Chaffin
Mon Jun 23, 2025 12:45 pm
Wtb purple tinted headlight lenses

Last post by David Mazza « Sun Jun 22, 2025 9:26 pm
Replies: 2
by David Mazza » Sun Jun 22, 2025 6:42 pm

First post

I’d love to find a pair of purple tinted headlight lenses for my 25 runabout. Thank you! Have a great summer!

Last post

Two replies thank you!

2 Replies

746 Views

Last post by David Mazza
Sun Jun 22, 2025 9:26 pm
^ volt starter for sale

Last post by elliott1936 « Sun Jun 22, 2025 8:06 pm
Replies: 3
by elliott1936 » Tue Jun 17, 2025 12:43 pm

First post

This starter was rebuilt a few years back and never installed. I would like to sell for $200.00 plus the cost of shipping. Tom Five03-644-937four

Last post

I will ship this starter at my cost for $200.00. I know where is somone out where that can use is.

3 Replies

1331 Views

Last post by elliott1936
Sun Jun 22, 2025 8:06 pm

New Topic

10463 topics

Page 19 of 105
- Jump to page:
Previous
1
…
17
18
19
20
21
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum