Classifieds - Parts - Page 33

Classifieds - Parts

New Topic

9199 topics

Page 33 of 92
- Jump to page:
Previous
1
…
31
32
33
34
35
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79226 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Floating rear axle hub kit F/S

Last post by Layden Butler « Tue Jul 09, 2024 2:54 pm
Replies: 1
by Layden Butler » Sun Jun 16, 2024 2:06 pm

First post

This new never installed kit replaces the Hyatt outer roller rear axle bearing with a sealed large ball bearing. It also provides a modern seal on the axle shaft to stop differential lube from leaking onto the brakes. This kit does both left and right rear axles. The bearing mounts have 6 holes so are intended for wood wheels ( that includes...

Last post

$475 including shipping!

1 Replies

1050 Views

Last post by Layden Butler
Tue Jul 09, 2024 2:54 pm
SOLD: Original Updraft Carburetor Manifold with Linkage For Small Winfield, Miller Master, Zenith, Model A Etc

Last post by Jerry VanOoteghem « Tue Jul 09, 2024 11:54 am
Replies: 4
by GGZ » Fri Jun 14, 2024 7:17 pm

First post

SOLD TO CHRIS! Thank you.

Here is an original, cast iron, updraft manifold with the L linkage. This is in good condition and is made for a Model T stock block. One of the bolt holes has been enlarged but still works well.
It has an about 1 1/4 bore and a 2 1/2 center to center bolt mounting.
This can be used for Winfield, Miller-Master, Zenith,...

Last post

What else is really neat about this, is that you apparently do not have to use the glands, only the crush rings, when you mount this. Why didn't Ford do it this way on both intake & exhaust???

4 Replies

1261 Views

Last post by Jerry VanOoteghem
Tue Jul 09, 2024 11:54 am
FS NEW PRICE BUDD WHEELS $100

Last post by Jakekj « Tue Jul 09, 2024 7:26 am
Replies: 7
by got10carz » Sat Jun 22, 2024 1:51 pm

First post

For Sale parts pictured. No hubs.30x3 1/2 size. 3 loose rims are good, 1 has wobble. 3 loose centers have bad pitting. 2 centers have rear hubs welded in. Free delivery to Cadillac, or the brass event at the Gilmore. $100 for all. Steve 701 212 5009

Last post

100 All? I'll bite. Will you ship? I'll PM you

7 Replies

2138 Views

Last post by Jakekj
Tue Jul 09, 2024 7:26 am
WTB 1926-27 parking brake shoes

Last post by Reno Speedster « Tue Jul 09, 2024 12:33 am
Replies: 2
by Reno Speedster » Sat Jul 06, 2024 12:37 pm

First post

I am looking for a good pair of 1926-27 parking brake shoes.

Last post

I have a set the way. Thanks to the folks who got in touch.

2 Replies

629 Views

Last post by Reno Speedster
Tue Jul 09, 2024 12:33 am
FS 1926-27 touring and sedan and 1923-25 sedan fenders

Last post by Shannon_in_Texas « Mon Jul 08, 2024 9:57 pm
Replies: 5
by KimDobbins » Wed Jun 19, 2024 7:35 pm

First post

I have 2 right side 26-27 rear fenders. Surface rust, good solid fenders. $150.00 each.
2 right side 1923-25 sedan rear fenders. Nice fenders, $50.00 each. All plus shipping, kdmks@ att.net.

Last post

Kim,
I sent you a PM/email. Thanks!

5 Replies

1362 Views

Last post by Shannon_in_Texas
Mon Jul 08, 2024 9:57 pm
WTB Original E&J Pat 1908 Tailight for a 1911

Last post by wjrmga « Mon Jul 08, 2024 8:28 pm
Replies: 8
by ahovey » Mon Jun 17, 2024 1:09 pm

First post

Hi,

I am looking for a good quality, original tail light that doesn't need to be restored. Specifically looking for a E&J Patent 1908 tail lamp.

Please email me through the forum if you can help.

Thank you!

Austin Hovey

Last post

You might try Carl Leonard, email rocktoy4x4@aol.com.

8 Replies

1442 Views

Last post by wjrmga
Mon Jul 08, 2024 8:28 pm
FS pan mount bandaids

Last post by Karl Von Neumann « Mon Jul 08, 2024 11:54 am

by Karl Von Neumann » Mon Jul 08, 2024 11:54 am

Apco and Hudson pan mount repair bandaid neat for shelf sitters 20$ ea plus the ride

0 Replies

948 Views

Last post by Karl Von Neumann
Mon Jul 08, 2024 11:54 am
FS used pistons

Last post by Karl Von Neumann « Mon Jul 08, 2024 11:14 am
Replies: 1
by Karl Von Neumann » Fri Jul 05, 2024 5:23 pm

First post

Used pistons 5ea plus the ride. Used Rods also avaliable 10$ea plus the ride

Last post

Move to top

1 Replies

519 Views

Last post by Karl Von Neumann
Mon Jul 08, 2024 11:14 am
Ecct

Last post by Eddieleft « Mon Jul 08, 2024 8:25 am
Replies: 16
by Eddieleft » Tue Jul 02, 2024 12:45 pm

First post

Does anybody have a used ecct they would like to sell. If so please let me know. Thank you

Last post

Did you get my email?

16 Replies

1668 Views

Last post by Eddieleft
Mon Jul 08, 2024 8:25 am
Chevrolet 21" rims

Last post by Jakekj « Mon Jul 08, 2024 7:00 am
Replies: 6
by ModelTWoods » Fri Jul 05, 2024 10:12 pm

First post

Earlier this year, I advertised FOUR 21 Chevrolet de-mountable rims. A Gent in the midwest, Ohio, if I remember right, called and said he would like them. He stated that he and his wife were taking a cross country vacation in May-June and would be going as far as California, Coming back from California, he would come through New Mexico, before...

Last post

Thank you. Let me know if they become available.

6 Replies

911 Views

Last post by Jakekj
Mon Jul 08, 2024 7:00 am
FS: Ruckstell Rear Ends - Removed from the Market

Last post by Michael Peternell « Sun Jul 07, 2024 10:14 pm
Replies: 2
by JTT3 » Sat Jul 06, 2024 11:59 pm

First post

Jonathan I believe that’s what you call a deal. Montana is a bit too far from New Orleans area if it wasn’t I’d take all 4 at those prices.

Last post

Want to meet up at the Divide county threshing bee in Crosby ND? Drive wise about the same. I'm going to be there, and pretty sure other folks I know wood take them off your hands.

2 Replies

1411 Views

Last post by Michael Peternell
Sun Jul 07, 2024 10:14 pm
Reproduction Brass Steering Wheel Spider Sold!

Last post by 22_ Tcoupe « Sun Jul 07, 2024 9:29 pm
Replies: 1
by Rodger Erickson » Sun Jul 07, 2024 12:51 pm

First post

FS: Reproduction brass steering wheel spider, fits wheels with an ID of approx 12 1/4 . There are a couple of rough spots that will need to be smoothed out, including one spot where there was a hole in the casting that had to be brazed up. If cleaned up and polished this would look fantastic. Asking $40 not including shipping.

brspd01.jpg...

Last post

I will take it. Sending you an email.

1 Replies

486 Views

Last post by 22_ Tcoupe
Sun Jul 07, 2024 9:29 pm
For Sale: 1926-27 Model T Wire Wheels with Hubs

Last post by GatorsModelT « Sun Jul 07, 2024 4:25 pm
Replies: 2
by GatorsModelT » Sat Jul 06, 2024 1:29 am

First post

For Sale: 1926-27 Model T Wire Wheels with Hubs. These wheels have been sandblasted and primed. $1000.00 Contact Eric Gator Gould 251-765-2677 Monroeville, AL

Last post

Hi yes I can get pictures for you. And I'll send them to you.

2 Replies

898 Views

Last post by GatorsModelT
Sun Jul 07, 2024 4:25 pm
WTB 26-27 Hood Shelves

Last post by ModelTWoods « Sun Jul 07, 2024 1:52 pm
Replies: 3
by ckrafft » Thu Jul 04, 2024 3:43 pm

First post

WTB 1926-1927 hood shelves.

Last post

Dang, I wish I wasn't 140 miles one way from my parts storage. I know that I have some; Original and Reproduction.

3 Replies

647 Views

Last post by ModelTWoods
Sun Jul 07, 2024 1:52 pm
FS frame cross members

Last post by Karl Von Neumann « Sun Jul 07, 2024 12:29 pm

by Karl Von Neumann » Sun Jul 07, 2024 12:29 pm

Cross members fronts and rears will ship 40 ea plus the ride

0 Replies

825 Views

Last post by Karl Von Neumann
Sun Jul 07, 2024 12:29 pm
side curtain hooks

Last post by Melba Nolan « Sun Jul 07, 2024 9:44 am
Replies: 8
by Melba Nolan » Sat Jun 15, 2024 8:44 pm

First post

For sale: side curtain hooks $2 each or 6 for $10 plus postage

20240102_123309.jpg

Last post

I still have 6 hooks left

8 Replies

1315 Views

Last post by Melba Nolan
Sun Jul 07, 2024 9:44 am
WTB pedal extension

Last post by WayneJ « Sun Jul 07, 2024 8:46 am
Replies: 1
by WayneJ » Wed Jun 12, 2024 7:18 am

First post

WTB reproduction brake and low pedal extensions.

Last post

Still looking

1 Replies

743 Views

Last post by WayneJ
Sun Jul 07, 2024 8:46 am
Ribbed Low Pedal - Lower Price

Last post by BE_ZERO_BE « Sun Jul 07, 2024 5:09 am
Replies: 3
by BE_ZERO_BE » Thu Jul 04, 2024 12:27 am

First post

Ribbed Low Pedal.
$20.00 + Shipping. - OBO
Last chance before it goes into the scrap pile.

bcascisa@gmail.com

Last post

sale is pending

3 Replies

902 Views

Last post by BE_ZERO_BE
Sun Jul 07, 2024 5:09 am
15-16 Door Latch With Striker Plate - Lower price

Last post by BE_ZERO_BE « Sun Jul 07, 2024 5:05 am
Replies: 3
by BE_ZERO_BE » Thu Jul 04, 2024 12:36 am

First post

15-16 Door Latch With Striker Plate.
Good Condition.

Was $100 - Now $50 + Shipping - OBO
Last chance before it goes into the scrap pile.

bcascisa@gmail.com

Last post

Sale is pending.

3 Replies

855 Views

Last post by BE_ZERO_BE
Sun Jul 07, 2024 5:05 am
Speedster Gas Tank Air Pump - Lower Price

Last post by Craig Leach « Sun Jul 07, 2024 12:30 am
Replies: 6
by BE_ZERO_BE » Thu Jul 04, 2024 12:20 am

First post

Speedster Gas Tank Air Pump.
Nickel plated brass.
Works - Pumps Air just fine.

$50 Last chance before it goes into the brass scrap pile. + Shipping.
bcascisa@gmail.com

Last post

Glad to hear, thanks for letting me know.
Craig.

6 Replies

1344 Views

Last post by Craig Leach
Sun Jul 07, 2024 12:30 am
Brand New Cast Zinc starter/generator Brush Holders

Last post by AdminJeff « Sun Jul 07, 2024 12:15 am

by AdminJeff » Sun Jul 07, 2024 12:15 am

After months of tweaking and fiddling and back and forth modifying engineering drawings, molds and testing samples, they are finally done. They are perfect in every way. I even snuck my MTS logo in at the last minute.

Set of 4 large brush holders, meticulously copied and cast from durable Zinc instead of the weak, crack-prone, stripped threads,...

0 Replies

1231 Views

Last post by AdminJeff
Sun Jul 07, 2024 12:15 am
WTB BLACKHAWK 4422 wrench

Last post by JTT3 « Sat Jul 06, 2024 9:45 pm

by JTT3 » Sat Jul 06, 2024 9:45 pm

Anyone have an extra Blackhawk number 4422 used for the 4 11/16 bolts for the flywheel. I like one in good condition, already got the bad condition one ha.
Best John

0 Replies

731 Views

Last post by JTT3
Sat Jul 06, 2024 9:45 pm
nice 26-27 radiator shell

Last post by Allan « Sat Jul 06, 2024 7:56 pm
Replies: 6
by BuddyPugs » Tue Jul 02, 2024 7:49 pm

First post

I have a nice 26-27 model T radiator shell for sale I bought it a few years ago from a model T restorer and I paid $100 for it so I would like to get my money back. the 26-27 shells flair out on the sides to match the hood the 23-25 shells are flat on the sides and the hood goes straight back. look at the pictures because this is not your average...

Last post

Not so Terry. I believe the flared sides came with the high radiators in 1923.

Allan from down under.

6 Replies

884 Views

Last post by Allan
Sat Jul 06, 2024 7:56 pm
Set of Dill tire stem covers SOLD

Last post by Allan « Sat Jul 06, 2024 7:54 pm
Replies: 2
by Layden Butler » Sat Jul 06, 2024 4:22 pm

First post

Set of 5 very nice Dill brand tire tube stem covers, these are made of brass and nickel plated.

Last post

These are the best! They thread onto the universal small end of any valve stem, metal or rubber. The internal thread slides up and down so the dust cover can fit any length of stem.

Allan from down under.

2 Replies

613 Views

Last post by Allan
Sat Jul 06, 2024 7:54 pm
E-Timer

Last post by Bruce Compton « Sat Jul 06, 2024 3:07 pm
Replies: 2
by jamlip » Fri Jul 05, 2024 9:59 pm

First post

E-Timer, light use, $400.

Used on my car for a couple of years. Works beautifully. Can mail.

James
Tel: 310.Twenty-Two.Seven.Sixty-5.Twenty-5

Last post

James, I'm interested. Does it have the spacer mentioned and the wiring diagram with it? Bruce

2 Replies

714 Views

Last post by Bruce Compton
Sat Jul 06, 2024 3:07 pm
Jefferson Coil Buzz Boxes

Last post by BE_ZERO_BE « Sat Jul 06, 2024 1:55 pm
Replies: 2
by BE_ZERO_BE » Thu Jul 04, 2024 12:49 am

First post

Jefferson Coil Buzz Boxes

Refurbished with new power cords.
Very nice condition.

Light and dark finish.

$100.00 each + Shipping

Last post

They are SOLD :)

2 Replies

879 Views

Last post by BE_ZERO_BE
Sat Jul 06, 2024 1:55 pm
12 rivet housings

Last post by Joe Bell « Sat Jul 06, 2024 12:59 pm

by Joe Bell » Sat Jul 06, 2024 12:59 pm

I have three sets of 12 rivet housings, two are complete axle, no dive shafts, 200. take your pick. 419-618-1025 Joe Bell and no I will not ship them, they could make it to Hershey in the fall with me.

0 Replies

890 Views

Last post by Joe Bell
Sat Jul 06, 2024 12:59 pm
Looking for one headlight.

Last post by Dollisdad « Sat Jul 06, 2024 12:30 pm
Replies: 3
by Dollisdad » Fri Jul 05, 2024 9:34 pm

First post

Looking for a Jno. Brown model 16. Will take parts.
Thanks

Last post

Sent you an email.

3 Replies

699 Views

Last post by Dollisdad
Sat Jul 06, 2024 12:30 pm
HCCT

Last post by Melba Nolan « Sat Jul 06, 2024 10:54 am
Replies: 1
by Melba Nolan » Wed Jun 26, 2024 9:38 am

First post

For sale: Allen coil tester $1200 pickup
works good. 20230714_191806.jpg 20230714_191840.jpg

Last post

move to top

1 Replies

653 Views

Last post by Melba Nolan
Sat Jul 06, 2024 10:54 am
Pack nut accessory clamp

Last post by Ed Fuller « Sat Jul 06, 2024 10:40 am
Replies: 8
by Mopar_man » Wed Jul 03, 2024 9:06 pm

First post

Anyone know where i can get one? Seems Rattles is living up to his name. Everyplace seems to be out of stock. I know I can make one but I'd like to get the accessory if someone has one.

Thanks
Rob

Last post

Jerry, like Terry Woods said. A hose clamp installed on the pipe and jammed right up against the back of the nut will keep the nut from backing off.

8 Replies

2254 Views

Last post by Ed Fuller
Sat Jul 06, 2024 10:40 am
WTB - Rebuildable 1926-27 Model T engine block s/n 12222529 or higher

Last post by Joe Bell « Sat Jul 06, 2024 7:18 am
Replies: 9
by joeoldcars » Sat Jun 29, 2024 8:29 am

First post

Looking to purchase a rebuildable 1926-27 type Model T engine block to replace one on my engine that cracked through coolant cavity into and top of valve gallery. I have obtained 3 so far, cleaned and crack inspected and found all three with cracks around valve seats heading down to the same area that can’t be used or reliably repaired. Goal is to...

Last post

I have several to look at already tore down give me a jingle Tiffin Ohio

9 Replies

1756 Views

Last post by Joe Bell
Sat Jul 06, 2024 7:18 am
1926 model T touring body

Last post by Fozz71 « Fri Jul 05, 2024 9:02 pm
Replies: 3
by BuddyPugs » Tue Jul 02, 2024 1:21 pm

First post

I have a nice 26 model T touring body for sale. This is a nice body not the normal ones that are out there it still has paint on it and it still has upholstery in it. it is not rusted out anywhere.Im in Sherman texas and I'm asking $2000 for it. this is just the body

Last post

If the winner would be willing to sell the old upholstery, I may be interested. (in case they want new)

Thanks,
James 630-608-3978

3 Replies

909 Views

Last post by Fozz71
Fri Jul 05, 2024 9:02 pm
WANTED: 26-27 Used/New Upholstery

Last post by Fozz71 « Fri Jul 05, 2024 9:00 pm

by Fozz71 » Fri Jul 05, 2024 9:00 pm

I am hunting for a used or new 1926-7 Touring upholstery whole or in part. I have a driver and would like to get some sort of interior into it. I am in northern Illinois but will pay for shipping.

Thanks,
James
630-608-3978
text/call

0 Replies

748 Views

Last post by Fozz71
Fri Jul 05, 2024 9:00 pm
FS transmission parts

Last post by Karl Von Neumann « Fri Jul 05, 2024 5:24 pm

by Karl Von Neumann » Fri Jul 05, 2024 5:24 pm

Many transmission parts for sale email with your needs more that what's pictured

0 Replies

712 Views

Last post by Karl Von Neumann
Fri Jul 05, 2024 5:24 pm
WTB Door catch for TT cab

Last post by TheSaintDiscJockey « Fri Jul 05, 2024 3:50 pm
Replies: 2
by TheSaintDiscJockey » Wed Jul 03, 2024 8:29 am

First post

Looking to buy two (2) catches that I can use to secure the doors to a wood TT cab when the doors are folded back.
Anything period correct for a 1923 TT.
I'm thinking even two metal strips that I could bend to accommodate the handles.
Any help/advice much appreciated.
Thanking all in advance.
Text @ six zero 9, nine two 0, 4 two two 0.
Or, pm.

Last post

I guess I'll get something made to hold these doors flat against the cab when they are open. TT guys will know in particular, especially with the aftermarket cabs.
Thought I would just throw it out there.

2 Replies

547 Views

Last post by TheSaintDiscJockey
Fri Jul 05, 2024 3:50 pm
Need One Hub Cap

Last post by TheSaintDiscJockey « Fri Jul 05, 2024 3:46 pm
Replies: 8
by ChuckLebeda » Mon Jun 17, 2024 5:06 pm

First post

I am in need of one (1) hub cap to fit my 1919 C-door.

Would like one that matches the 'patina' of my other three on the car.

Thanks,

Chuck

Last post

Let me know if you are interested 😊. I do have one previously posted.

8 Replies

1937 Views

Last post by TheSaintDiscJockey
Fri Jul 05, 2024 3:46 pm
FS mag coils for reapair

Last post by Karl Von Neumann « Fri Jul 05, 2024 2:18 pm

by Karl Von Neumann » Fri Jul 05, 2024 2:18 pm

Mag coils I will pull them off and ship you the copper coil 10$ each 15 available currently mag plate free w/o coils you pay shipping

0 Replies

687 Views

Last post by Karl Von Neumann
Fri Jul 05, 2024 2:18 pm
FS cheap rough trans

Last post by Karl Von Neumann « Fri Jul 05, 2024 2:16 pm

by Karl Von Neumann » Fri Jul 05, 2024 2:16 pm

Limted time only rough ugly frozen trans 50$ no shipping pick up in pleasant prairie wisconsin. Other wise I'll strip what I can toss the rest

0 Replies

714 Views

Last post by Karl Von Neumann
Fri Jul 05, 2024 2:16 pm
FS: Non-Ford Brown? Black & Brass Head Light $145

Last post by Rodger Erickson « Fri Jul 05, 2024 12:37 pm
Replies: 1
by Rodger Erickson » Sun Jun 23, 2024 1:11 pm

First post

FS: One non-Ford carbide headlight bucket ca. 1912-1913 that I believe was mfd by Jno. Brown, as the smoke bonnet is real similar to a Brown 19. This is a Black & Brass light with a steel bucket for a car that's a little larger than a Model T; the headlight fork mounts are approx 8 1/2 center to center. Decent shape, no rustout, but sadly the...

Last post

Any takers at $125?

1 Replies

647 Views

Last post by Rodger Erickson
Fri Jul 05, 2024 12:37 pm
FS Morsher-Lee Round Tank Day-Night Gas Gauge *sold pending payment*

Last post by bdtutton « Fri Jul 05, 2024 12:15 pm
Replies: 2
by NealW » Sat Jun 29, 2024 4:19 pm

First post

For Sale
Lee Day-Night gas gauge reproduction made by Tim Morsher. It is calibrated for a ROUND gas tank. Tim stopped making these in 2022.

Price is $140, which includes tracked shipping within the US. International sale shipping would be extra.

Please contact me using the information provided below. NO PM please.

Last post

I have a 1914 with a round gas tank and I am interested....will send an e-mail.

2 Replies

1058 Views

Last post by bdtutton
Fri Jul 05, 2024 12:15 pm
F-S UNIVERSAL JOINT

Last post by John iaccino « Thu Jul 04, 2024 6:06 pm
Replies: 2
by John iaccino » Tue Jul 02, 2024 8:47 pm

First post

Good U-joint $50 plus flat rate shipping. USA only

Last post

Sold, pending funds. email sent to Tim

2 Replies

744 Views

Last post by John iaccino
Thu Jul 04, 2024 6:06 pm
Camshaft Rear Bushing Reamer

Last post by BE_ZERO_BE « Thu Jul 04, 2024 3:39 pm
Replies: 4
by BE_ZERO_BE » Thu Jul 04, 2024 12:53 am

First post

Camshaft Rear Bushing Reamer.
Reamer protected with a piece of heat shrink

$200.00 + Shipping

bcascisa@gmail.com

Last post

Pending sale.

4 Replies

1114 Views

Last post by BE_ZERO_BE
Thu Jul 04, 2024 3:39 pm
15 Coil Box Switch

Last post by BE_ZERO_BE « Thu Jul 04, 2024 3:38 pm
Replies: 2
by BE_ZERO_BE » Thu Jul 04, 2024 12:39 am

First post

15 Coil Box Switch
Good Condition.

$50.00

bcascisa@gmail.com

Last post

Pending Sale

2 Replies

737 Views

Last post by BE_ZERO_BE
Thu Jul 04, 2024 3:38 pm
15-16 Horn Button

Last post by BE_ZERO_BE « Thu Jul 04, 2024 3:37 pm
Replies: 3
by BE_ZERO_BE » Thu Jul 04, 2024 12:31 am

First post

15-16 Horn Button.
Very good shape.

$50.00 + Shipping.

bcascisa@gmail.com

Last post

Pending Sale

3 Replies

772 Views

Last post by BE_ZERO_BE
Thu Jul 04, 2024 3:37 pm
Ruckstell Shift Lock

Last post by BE_ZERO_BE « Thu Jul 04, 2024 3:36 pm
Replies: 2
by BE_ZERO_BE » Thu Jul 04, 2024 1:01 am

First post

Ruckstell Shift Lock.
Made from a new bronze casting by a master machinist.
Notice the thickness of the collar around the shift lever.
I have had one on my T for many years - It's indestructible.

$150.00 + Shipping

bcascisa@gmail.com

Last post

Pending Sale.

2 Replies

828 Views

Last post by BE_ZERO_BE
Thu Jul 04, 2024 3:36 pm
WTD: Working New Day Timer

Last post by desertexplorer « Thu Jul 04, 2024 12:25 pm
Replies: 3
by PhoneGuy » Wed Jul 03, 2024 11:21 am

First post

Looking for an older new day timer and the contact/ bracket that goes on the cam.

Scott

Last post

The New Days are great timers but will sometimes start to get uneven with long use but are easy to turn on a lathe and reface to like new. I’ve probably refaced over 20 of them over the years.

3 Replies

735 Views

Last post by desertexplorer
Thu Jul 04, 2024 12:25 pm
Looking for Unusuak Model T Coil Box Keys

Last post by Don Demio « Thu Jul 04, 2024 12:22 pm
Replies: 3
by Don Demio » Thu Jul 04, 2024 11:03 am

First post

Help wanted - Looking for Unusual Model T Coil Box Keys or quality photos of them..

Please see the attached MS Word document because I don't know how to post photos.

Thanks for your attention,

Don

LOOKING FOR THESE UNIQUE MODEL T FORD COIL BOX KEYS.docx

Last post

John,

Thank you for your assistance so others can see them.

Wallace,

Thank you for posting these. While very unique, due to the kindness of others, I do have them in my collection.

This forum is truly great and soooo helpful.

Happy 4th of July to all,

Don

3 Replies

667 Views

Last post by Don Demio
Thu Jul 04, 2024 12:22 pm
1928 Model AR Tire and Wheel for Sale

Last post by J1MGOLDEN « Thu Jul 04, 2024 8:25 am

by J1MGOLDEN » Thu Jul 04, 2024 8:25 am

This 1928 Model AR Tire and Wheel has no milage on a new Made in USA Tire and Tube installed on a rim with not bent spokes that was bead blasted and painted with expensive paint. The hub cap is a little larger than a Model T wheel has and can easily fool a novice! The part is located in Bowie, Maryland. $500.00 Jim Golden

0 Replies

777 Views

Last post by J1MGOLDEN
Thu Jul 04, 2024 8:25 am
FS- '13/14 brass radiator

Last post by TWrenn « Thu Jul 04, 2024 5:59 am
Replies: 1
by TWrenn » Tue Jul 02, 2024 11:48 am

First post

Selling for a club friend. This is a nice usable brass radiator. '13/14 with gas lamp holes in the sides. Yes it has a bit of solder work as you can see. Owner leak tested and said it's tight. I gave it two of the infamous 4-second evacuation tests and it passed with flying colors...no more than 5 seconds if that. So should be pretty clear in the...

Last post

SOLD..pending pmt. Thanks Kurt & MTFCA

1 Replies

682 Views

Last post by TWrenn
Thu Jul 04, 2024 5:59 am
Early Door Latches - Lower Price

Last post by BE_ZERO_BE « Thu Jul 04, 2024 12:45 am

by BE_ZERO_BE » Thu Jul 04, 2024 12:45 am

Early Door Latches
Not sure what they are for.

Last chance before it goes into the scrap pile.
$50.00 + Shipping for all - OBO

bcascisa@gmail.com

0 Replies

787 Views

Last post by BE_ZERO_BE
Thu Jul 04, 2024 12:45 am
WTB 1914 head water outlet

Last post by Tparts « Wed Jul 03, 2024 9:15 pm
Replies: 3
by Daisy Mae » Tue Jul 02, 2024 8:50 pm

First post

In need of a brass era (my 1914) upper water outlet. Repros no longer available, and mine is shot...
Need one in decent condition.
Pm/email with any for sale with pics & price
Thanks!

Last post

Talk to Steve

3 Replies

631 Views

Last post by Tparts
Wed Jul 03, 2024 9:15 pm
WTB: Sun Visor for a 23 coupe

Last post by PhoneGuy « Wed Jul 03, 2024 4:41 pm

by PhoneGuy » Wed Jul 03, 2024 4:41 pm

Looking for a sun visor that fits above the windshield on a '23 / '24 coupe.

0 Replies

659 Views

Last post by PhoneGuy
Wed Jul 03, 2024 4:41 pm
1914-5 Ford Special Speedometer Road Gear SOLD

Last post by Layden Butler « Wed Jul 03, 2024 3:04 pm

by Layden Butler » Wed Jul 03, 2024 3:04 pm

This gear was used on all brands of the 1914-15 Ford Special speedometers, it is in perfect restored condition with no wear marks or signs it was ever mounted.

0 Replies

746 Views

Last post by Layden Butler
Wed Jul 03, 2024 3:04 pm
FS Transmission oil screen - SOLD

Last post by TheSaintDiscJockey « Wed Jul 03, 2024 10:14 am
Replies: 2
by TheSaintDiscJockey » Tue Jul 02, 2024 4:32 pm

First post

Transmission oil screen, with magnet.
Used, but in great shape and ready to install.
It's an extra sitting in the shed.
$20.00, plus $15.00 for shipping.
Text @ six zero 9 9 two zero 4 two two 0.
Or, pm.
Many thanks.

Last post

Item has sold.
Many thanks, MTFCA!

2 Replies

578 Views

Last post by TheSaintDiscJockey
Wed Jul 03, 2024 10:14 am
1913 Bare block FS

Last post by Tbird « Wed Jul 03, 2024 9:37 am
Replies: 4
by Tbird » Wed Jun 12, 2024 9:32 pm

First post

13 block serial number 186389. No casting date that I can find. The block was thermo cleaned, and shot peened clean. It was magma fluxed and has a crack along the water jacket area. It will need the usual machine work
The block has many of the 12 features such as the pronounced lip at the rear, and the single webbing.
Has some heavy pitting on...

Last post

Round two.

4 Replies

1190 Views

Last post by Tbird
Wed Jul 03, 2024 9:37 am
13-14 Running Board Brackets SOLD

Last post by Tbird « Wed Jul 03, 2024 9:35 am
Replies: 1
by Tbird » Tue Jun 11, 2024 1:58 pm

First post

These were removed off a 13-14 chassis
I did some straightening on them using Tom Rootlieb’s running board bracket jig. They just need a little tweaking
Boss bolt areas measure .41-.43” the brackets have been sandblasted as well.
$85 plus shipping.

mikebird@lifeattheridge.net

IMG_1963.jpeg

IMG_1964.jpeg

IMG_1965.jpeg

Last post

Round two!

1 Replies

670 Views

Last post by Tbird
Wed Jul 03, 2024 9:35 am
26 model T headlight

Last post by micshotrodgarage « Wed Jul 03, 2024 8:28 am
Replies: 1
by BuddyPugs » Tue Jul 02, 2024 2:17 pm

First post

I have a pair of 26 model T headlights for sale I'm in Sherman texas and I'm asking $25 each I also have a pair of 27 headlights mounted on the bar I would take $75 for

Last post

Hello Harold, I may be interested in the 27 headlights you mentioned in the add. Might I get a picture please. You can send it to micscarz@yahoo.com. Thank you... Mike

1 Replies

442 Views

Last post by micshotrodgarage
Wed Jul 03, 2024 8:28 am
F-S SPARK PLUG WIRES NEW

Last post by John iaccino « Wed Jul 03, 2024 8:12 am
Replies: 2
by John iaccino » Tue Jul 02, 2024 8:36 pm

First post

New spark plug wires for sale. $10 plus flat rate shipping. USA only.

Last post

email sent, sold to Rick.

2 Replies

583 Views

Last post by John iaccino
Wed Jul 03, 2024 8:12 am
26-27 nickel radiator shell

Last post by BuddyPugs « Tue Jul 02, 2024 8:57 pm

by BuddyPugs » Tue Jul 02, 2024 8:57 pm

I have a 26-27 nickel radiator shell for sale. they only made these on the 26-27 cars all the closed cars had this shell in 26-27 and some of the open cars also had this one but the trucks didn't come with the nickel radiator shell. This shell is made out of brass so it wont rust like the steel ones did. it probably cant be fixed to look good but...

0 Replies

750 Views

Last post by BuddyPugs
Tue Jul 02, 2024 8:57 pm
F/S Stewart & Clark Clock

Last post by Bruce Z « Tue Jul 02, 2024 7:45 pm
Replies: 2
by Bruce Z » Tue Jul 02, 2024 4:48 pm

First post

Stewart & Clark 8 day rim wind clock that is housed in a brass case. I would it just a little and the clock did not respond. I have taken clocks to a repair shop where they cleaned the clock to make it work. The 2 & 1/2 inch face appears to be in good condition. $250.00

Last post

Sold pending payment.

2 Replies

538 Views

Last post by Bruce Z
Tue Jul 02, 2024 7:45 pm
F/S Stewart & Clark Speedometer

Last post by Bruce Z « Tue Jul 02, 2024 7:44 pm
Replies: 2
by Bruce Z » Tue Jul 02, 2024 4:37 pm

First post

Stewart & Clark model 26 speedometer with a 3 inch face and mounting bracket. It seems to work as lightly spinning the drive end moves the needle. This speedometer is housed in a brass case. $300.00 plus shipping.

Last post

Sold pending payment.

2 Replies

516 Views

Last post by Bruce Z
Tue Jul 02, 2024 7:44 pm
worm gear REDUCED PRICE 2nd time SOLD

Last post by Melba Nolan « Tue Jul 02, 2024 6:15 pm
Replies: 6
by Melba Nolan » Sat Dec 23, 2023 10:57 pm

First post

20221120_091937 (1).jpg 20221120_091947 (1).jpg

For sale: worm gear in good condition $150 plus postage

Last post

reduced price is $75 plus postage

6 Replies

1610 Views

Last post by Melba Nolan
Tue Jul 02, 2024 6:15 pm
model T 21 inch split rims

Last post by kmatt2 « Tue Jul 02, 2024 5:04 pm
Replies: 5
by BuddyPugs » Tue Jul 02, 2024 1:15 pm

First post

I have 4 21 inch model T split rims for sale I'm asking $50 each and I'm in Sherman texas I also have wheels both 21 and clincher

Last post

Sorry double post.

5 Replies

1033 Views

Last post by kmatt2
Tue Jul 02, 2024 5:04 pm
1915-22 model T windshield

Last post by BuddyPugs « Tue Jul 02, 2024 2:08 pm

by BuddyPugs » Tue Jul 02, 2024 2:08 pm

I have a 1915-22 model T windshield with the glass and hinges for sale I'm in Sherman texas and I'm asking $100 for it

0 Replies

609 Views

Last post by BuddyPugs
Tue Jul 02, 2024 2:08 pm
Original Rocky Mountain Brake Part

Last post by Original Smith « Tue Jul 02, 2024 12:51 pm

by Original Smith » Tue Jul 02, 2024 12:51 pm

Wanted to Buy, an original bell bell crank that mounts at the front of the torque tube, and connects to the brake cable and equalizer. It is held onto the back of the engine by the two lower bolts.

0 Replies

796 Views

Last post by Original Smith
Tue Jul 02, 2024 12:51 pm
1926 model T touring body

Last post by BuddyPugs « Tue Jul 02, 2024 12:11 pm

by BuddyPugs » Tue Jul 02, 2024 12:11 pm

I have 3 26 touring body's this is a picture of one of them you will also notice there is wire wheels on it with hubs I do have a nice 26 touring body that still has black paint on it and upholstery. it is not rusted out anywhere this is a nice body. I'm in Sherman texas I'm asking $750 for just the body

0 Replies

661 Views

Last post by BuddyPugs
Tue Jul 02, 2024 12:11 pm
model T fenders

Last post by BuddyPugs « Tue Jul 02, 2024 11:58 am

by BuddyPugs » Tue Jul 02, 2024 11:58 am

I have a collection of model T fenders they are from about 1917-27 I would sell all or just one I'm in Sherman texas and I'm asking $50 each

0 Replies

655 Views

Last post by BuddyPugs
Tue Jul 02, 2024 11:58 am
23-25 left touring body pannel

Last post by BuddyPugs « Tue Jul 02, 2024 11:49 am

by BuddyPugs » Tue Jul 02, 2024 11:49 am

I have some body panels for a touring car also have door skins and some rear sections here is one picture of a left side there is also a 26-27 gas tank in the picture I'm in Sherman texas. I'm asking $25 for the body pannel

0 Replies

590 Views

Last post by BuddyPugs
Tue Jul 02, 2024 11:49 am
23-25model T turtle deck

Last post by BuddyPugs « Tue Jul 02, 2024 11:40 am

by BuddyPugs » Tue Jul 02, 2024 11:40 am

I have a turtle deck to fit a 23-25 model T roadster and I'm asking $75 for it. there is also lots of parts I would make a deal on. I'm in Sherman texas

0 Replies

603 Views

Last post by BuddyPugs
Tue Jul 02, 2024 11:40 am
FS Accessory Stop Light (SOLD)

Last post by JSteele « Tue Jul 02, 2024 9:33 am
Replies: 1
by ThreePedalTapDancer » Sun Jun 30, 2024 3:54 pm

First post

Accessory stop light. Mounts on flat spade bracket. Polished brass faceplate. Has single post small 12v bulb inside, can switched to 6 volt bulb if desired. Shines a bright purple “STOP” when activated. Nice condition. 4.75 x 2x 2. 100 includes shipping.

IMG_1337.jpeg

Last post

email sent

1 Replies

825 Views

Last post by JSteele
Tue Jul 02, 2024 9:33 am
WTB: E&J Burner

Last post by Bruce Z « Tue Jul 02, 2024 9:13 am
Replies: 5
by bowerss2 » Mon Jul 01, 2024 11:39 am

First post

Looking for an E&J burner (bayonet style)

Last post

I have the burners you are looking for. I sent you an email.

5 Replies

1302 Views

Last post by Bruce Z
Tue Jul 02, 2024 9:13 am
23-27 tall honeycomb radiator

Last post by South Park Zephyr « Tue Jul 02, 2024 8:27 am
Replies: 1
by BuddyPugs » Tue Jul 02, 2024 12:25 am

First post

I have a 23-27 tall honeycomb radiator that has been to the radiator shop and it was flow tested and was good and clear also leak checked and repaired. you can see the repair in the pictures but it would work for a driver just fine. I'm in Sherman texas and I'm asking $200 for it or best offer

Last post

Will you ship the radiator?
If so, Ill take it
I’m in the Saint Louis Area

Scott
636-544-775zero

Email sent

1 Replies

503 Views

Last post by South Park Zephyr
Tue Jul 02, 2024 8:27 am
SOLD! rebuilt Holley NH carburetor

Last post by Walt Wise « Tue Jul 02, 2024 7:17 am
Replies: 3
by Walt Wise » Sun Jun 30, 2024 2:01 pm

First post

I have too many spares on the shelf that I will probably never use, so I am selling this one that I had gone through for myself and test ran it afterwards. The carburetor was completely disassembled, cleaning all parts thoroughly, new choke spring, new Viton tipped needle and seat, reconditioned spray needle, new throttle and choke plates, new...

Last post

Mr. Cushway, check possibly your SPAM folder for emails from me(Walt Wise) and I also sent you a PM too. Thanks!!! Walt Wise

3 Replies

872 Views

Last post by Walt Wise
Tue Jul 02, 2024 7:17 am
Kingston 4 ball carburetor

Last post by BuddyPugs « Mon Jul 01, 2024 10:38 pm

by BuddyPugs » Mon Jul 01, 2024 10:38 pm

I have a Kingston 4 ball carburetor for sale I have had it for at least 40 years and it is pretty complete it looks like the only thing missing is the choke. I'm located in Sherman texas and I'm asking $200 or best offer

0 Replies

670 Views

Last post by BuddyPugs
Mon Jul 01, 2024 10:38 pm
Ray Wells Bodies; 1911,1910,1922

Last post by ryanpad « Mon Jul 01, 2024 7:08 pm

by ryanpad » Mon Jul 01, 2024 7:08 pm

I just picked up my '13 body and Ray Wells asked me to share that he has a 1911 touring (original/new wood) a '10 roadster and a '22 roadster body for sale. Message me and I'll share his phone number if interested.

0 Replies

982 Views

Last post by ryanpad
Mon Jul 01, 2024 7:08 pm
FS 1917 to 1925 NOS Complete Set Of Fenders

Last post by Stephen1915 « Mon Jul 01, 2024 6:38 pm
Replies: 2
by GPS » Mon Jul 01, 2024 11:24 am

First post

Selling a set of New Old Stock genuine Ford front and rear fenders, splash aprons and runningboards suitable for 1917 to 1925 Roadsters and Touring cars. All still have original factory black paint. The front fenders are the commercial style without the extra beads. One has a front lip, the other does not. $2500. for all Greg 612-940-5972...

Last post

Greg. Sending email

2 Replies

889 Views

Last post by Stephen1915
Mon Jul 01, 2024 6:38 pm
sediment bulb SOLD

Last post by John_Aldrich « Mon Jul 01, 2024 11:27 am
Replies: 3
by Melba Nolan » Sun May 12, 2024 9:43 pm

First post

For sale: sediment bulb and shut off #2902CBQ $30 plus shipping
20240625_153805.jpg 20240625_153644.jpg

email melbanolan@aol.com or text 314-575-7115

Last post

Check is in the mail.

3 Replies

975 Views

Last post by John_Aldrich
Mon Jul 01, 2024 11:27 am
Sold 26-7 hims water pump

Last post by Jakekj « Mon Jul 01, 2024 10:57 am
Replies: 2
by Karl Von Neumann » Fri Jun 28, 2024 11:49 am

First post

Himself water pump nice shape both pulled spring free 40$ plus the ride

Last post

I'm interested in the nims. I will send p m.

2 Replies

704 Views

Last post by Jakekj
Mon Jul 01, 2024 10:57 am
FS 1915 Rubes horn

Last post by fordrelic « Mon Jul 01, 2024 7:20 am
Replies: 9
by fordrelic » Sat Mar 23, 2024 3:31 pm

First post

For Sale: Black Rubes horn.

$250 plus shipping.

Last post

to the top

9 Replies

2087 Views

Last post by fordrelic
Mon Jul 01, 2024 7:20 am
FS Rubes Horn

Last post by fordrelic « Mon Jul 01, 2024 7:20 am
Replies: 12
by fordrelic » Wed Jan 10, 2024 6:51 pm

First post

original Rubes horn for sale.
$300 plus shipping

This horn does have reed and works.

Sumner, Illinois rubes horn.jpg rubes horn 2.jpg rubes horn 3.jpg rubes horn 5.jpg

Last post

to the top

12 Replies

2764 Views

Last post by fordrelic
Mon Jul 01, 2024 7:20 am
Champion X spark plugs NOS

Last post by MNToys « Sun Jun 30, 2024 7:37 pm
Replies: 1
by MNToys » Thu Jun 27, 2024 8:10 pm

First post

NOS set of four (4) Champion X spark plugs.
Asking $120 shipped CONUS.
Thanks!
Nick Rein
551 427 1593
PSUNicholas@yahoo.com

IMG_9158.jpeg

Last post

Sold!
Thanks!

1 Replies

722 Views

Last post by MNToys
Sun Jun 30, 2024 7:37 pm
Sold Jacobson Brandow coil box

Last post by model t americana « Sun Jun 30, 2024 5:31 pm
Replies: 1
by Bjerm » Sun Jun 30, 2024 3:39 pm

First post

Coil box is unfortunately missing the lid. $375 plus the ride best way to reach me is through the forum

Last post

Ben, I purchased a coil box from you several months ago which has worked out very well. Am interested in your Jacobson box and wondered what the total would be sent to 67039. Thanks, Dean from Kansas

1 Replies

514 Views

Last post by model t americana
Sun Jun 30, 2024 5:31 pm
SOLD! various brass Holley G parts and gasket set

Last post by Walt Wise « Sun Jun 30, 2024 3:35 pm
Replies: 2
by Walt Wise » Sun Jun 30, 2024 2:19 pm

First post

What we have here is some left over parts from rebuilding Holley G carbs and since I have sold all the G's that I have, plus won't be buying anymore, I thought for sure that someone could use these parts: the allusive strangling tube that always seems to be robbed out of cores, plus the set screw that the tube is attached to that a lot of times...

Last post

Thanks MTFCA!!!

Walt Wise

2 Replies

584 Views

Last post by Walt Wise
Sun Jun 30, 2024 3:35 pm
Brass Tire Tube Stem Covers

Last post by Layden Butler « Sun Jun 30, 2024 3:23 pm

by Layden Butler » Sun Jun 30, 2024 3:23 pm

These covers are made of brass and while nickel plated they can be stripped to solid brass.
Set of 4, $30 including domestic postage.

0 Replies

784 Views

Last post by Layden Butler
Sun Jun 30, 2024 3:23 pm
Wanted to buy, St Louis Magneto Tester

Last post by jab35 « Sun Jun 30, 2024 3:00 pm
Replies: 3
by Ron Patterson » Sat Jun 29, 2024 6:06 pm

First post

Cash ready to buy.
If anyone has one they want to sell please contact me.
Ron Patterson
231-348-5085

Last post

Joe, I think Texas T is owned by Birdhaven of Colfax IA, who did also buy Funprojects as you said. Respectfully, jb

3 Replies

1259 Views

Last post by jab35
Sun Jun 30, 2024 3:00 pm
T trailer FS

Last post by colonelpowers « Sun Jun 30, 2024 1:03 pm
Replies: 9
by colonelpowers » Sat Mar 30, 2024 4:42 pm

First post

The old trailer is ugly but solid. With different wheels stuck on it I towed it home and it pulled smooth and straight. It comes with an old set more 16 inch rims that have T hubs welded on. I have had them on and they run pretty well. I was going to fix it up but I have enough projects. $300

Last post

Still Available

9 Replies

2824 Views

Last post by colonelpowers
Sun Jun 30, 2024 1:03 pm
Anybody have anything pertaining to the "Lee Highway" ?

Last post by colonelpowers « Sun Jun 30, 2024 1:03 pm
Replies: 3
by colonelpowers » Thu Jun 27, 2024 3:05 pm

First post

Someone else in the club is looking for a specific Lincoln Highway item so I thought that I would see if anyone might have any Lee Highway items? I have been trying to plan a trip along the length of the Lee Highway from D.C. to San Diego in our T and am always searching for more information, literature, and memorabilia. It isn't really a T...

Last post

Thanks for the link to that map. I have seen one of those years ago and have searched for an original but never found one. It will be nice to finally get one.

3 Replies

954 Views

Last post by colonelpowers
Sun Jun 30, 2024 1:03 pm
FS: Nickel-Era Spotlight Restoration Project SOLD

Last post by Rodger Erickson « Sun Jun 30, 2024 12:54 pm
Replies: 1
by Rodger Erickson » Sun Jun 02, 2024 2:30 pm

First post

FS: one spot light, probably ca. 1915-1920, measuring approx. 6 OD, steel body with brass trim. Features a Pull type on-off switch appropriate to that era. The lens is missing as is part of the mounting bracket. The reflector will need to be replated. Restore or use for parts, this was a decent quality light back in the day. SOLD!

xspot01.jpg...

Last post

OK just pay shipping and its yours!

1 Replies

771 Views

Last post by Rodger Erickson
Sun Jun 30, 2024 12:54 pm
NOS Fiber Gear #2721 for T $20

Last post by Rodger Erickson « Sun Jun 30, 2024 12:51 pm

by Rodger Erickson » Sun Jun 30, 2024 12:51 pm

FS: Fiber gear for a Model T, p/n 2721. From what I understand these make the motor run more quietly, at least for a little while. NOS. Asking $20 not including shipping.

t272101.jpg

272102.jpg

Thanks for looking!

0 Replies

661 Views

Last post by Rodger Erickson
Sun Jun 30, 2024 12:51 pm
1909-1910 coil box?

Last post by TRDxB2 « Sun Jun 30, 2024 12:05 pm
Replies: 2
by Junk poor » Fri Jun 28, 2024 8:30 pm

First post

No connection to this. Just passing along the information.

Last post

A link with pictures of a Kingston Kokomo Electric coil box as the one above

2 Replies

873 Views

Last post by TRDxB2
Sun Jun 30, 2024 12:05 pm
FS tie rods

Last post by Karl Von Neumann « Sun Jun 30, 2024 11:39 am

by Karl Von Neumann » Sun Jun 30, 2024 11:39 am

Fresh in tierods need one there cheap only 30$ and the ride few earlier style ones as well

0 Replies

597 Views

Last post by Karl Von Neumann
Sun Jun 30, 2024 11:39 am
WTB 27 Valve Cover

Last post by Tim D « Sun Jun 30, 2024 11:30 am
Replies: 3
by EricMac » Sun Jun 30, 2024 8:09 am

First post

I am looking for a valve cover for a '27. It is unique because it lacks the hole for the carb control rod (because it is a Vaporizer car). Thanks for looking.

Last post

I have one also.

3 Replies

553 Views

Last post by Tim D
Sun Jun 30, 2024 11:30 am
FS main caps

Last post by ModelTWoods « Sun Jun 30, 2024 10:46 am
Replies: 1
by Karl Von Neumann » Sat Jun 29, 2024 1:32 pm

First post

Main bearing caps used will need babbitt buy one or all $10 each

Last post

Should get the block with the main caps at $10.00 each

If you know anyone selling GOOD blocks with main caps for $10.00 each, do us a favor and let all Forum members in on it. They won't last long at that price.

1 Replies

421 Views

Last post by ModelTWoods
Sun Jun 30, 2024 10:46 am
,WTB 1914 coil box in unrestored condition

Last post by Original14T « Sat Jun 29, 2024 10:27 pm
Replies: 1
by Original14T » Sun Jun 23, 2024 4:46 am

First post

Wanted to buy a 1914 Ford or KW coil box with either original paint or with plenty of patina for my unrestored October 1913 touring car. Don't need coils just the box with switch and lid. Thanks, Bill

Last post

Thanks Jonathan, PM sent

1 Replies

840 Views

Last post by Original14T
Sat Jun 29, 2024 10:27 pm
Model T? Windshield Hinges

Last post by RajoRacer « Sat Jun 29, 2024 8:42 pm
Replies: 1
by Rodger Erickson » Sat Jun 29, 2024 2:22 pm

First post

FS: A pair of windshield hinges. They look like your typical 1917-23 hinges except both arms are long. I don't know if these are for a 1914 or maybe even a different make of car. Also, someone chrome plated them at some point which makes them even more of a mess. They're yours for $25 not including shipping.

xhng01.jpg

xhng02.jpg

Thanks for...

Last post

'14 has double bump detents.

1 Replies

480 Views

Last post by RajoRacer
Sat Jun 29, 2024 8:42 pm
VINTAGE FORD MAGAZINE

Last post by SamInStL « Sat Jun 29, 2024 6:54 pm
Replies: 2
by Chaffins » Fri Jun 21, 2024 5:26 pm

First post

VOL 1 N0 1 TO VOL 40 N0 6
VOL 41 NO 1,2,3,4 MISSING
VOL 42 NO 3 MISSING
VOL 43 COMPLETE
VOL 44 NO 5 MISSING
VOL 45 COMPLETE
VOL 46 COMPLETE
VOL 47 NO 4 MISSING
VOL 48 COMPLETE
VOL 49 NO 3,4,5 6 MISSING
$100.00 FOR ALL. CAN SHIP UPS, POST OFFICE OR FASTENAL.
CUSTOMER PAYS SHIPPING.

Last post

Herb, if they're not sold yet I'll buy them.

2 Replies

977 Views

Last post by SamInStL
Sat Jun 29, 2024 6:54 pm
?? Any calling for bad hyatts

Last post by speedytinc « Sat Jun 29, 2024 5:46 pm
Replies: 5
by Karl Von Neumann » Sat Jun 29, 2024 1:36 pm

First post

I've got 2 half full boxes of hyatts all are loose cages falling apart twisted etc etc if there's any interest beer money and the ride for how ever many you want other wise it's off to the scrapper at some point

Last post

If the roller dims check out, sell em loose & let the buyer tighten them up for the bargain price.

5 Replies

696 Views

Last post by speedytinc
Sat Jun 29, 2024 5:46 pm
SOLD accessory horn button

Last post by Karl Von Neumann « Sat Jun 29, 2024 1:37 pm
Replies: 4
by Karl Von Neumann » Fri Jun 28, 2024 11:52 am

First post

Accessory horn button goes on the steering shaft wires are only 6 ish inches button move free haven't checked if it works $15 plus the ride. SOLD

Last post

If the first buyer backs out I will take it. Thanks!

Already marked as sold

4 Replies

660 Views

Last post by Karl Von Neumann
Sat Jun 29, 2024 1:37 pm
FS 1913 Holley S 4450 Carburetor (SOLD)

Last post by ThreePedalTapDancer « Sat Jun 29, 2024 1:34 pm
Replies: 3
by ThreePedalTapDancer » Mon Jun 17, 2024 5:10 pm

First post

Here is an original, very rare, 1913 Holley S 4450 “2-Screw” carburetor. It is in excellent condition, complete, with the impossible to find, correct, UNCRACKED brass bowl. It has minimal play in the throttle shaft, and only requires a replacement choke return spring. It is very clean inside and out, and was stored dry for countless decades. The...

Last post

Nice carb with rare uncracked brass bowl.

3 Replies

1152 Views

Last post by ThreePedalTapDancer
Sat Jun 29, 2024 1:34 pm
FS brass petcocks used

Last post by Karl Von Neumann « Sat Jun 29, 2024 1:34 pm

by Karl Von Neumann » Sat Jun 29, 2024 1:34 pm

Brass petcocks used haven't messed with them 3 move 2 don't as is parts or repair $30 takes all 5 shipping lower 48

0 Replies

551 Views

Last post by Karl Von Neumann
Sat Jun 29, 2024 1:34 pm

New Topic

9199 topics

Page 33 of 92
- Jump to page:
Previous
1
…
31
32
33
34
35
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum