Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 79229 Views
-
Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm
-
-
water inlets
Replies: 10
by
Melba Nolan » Fri Jun 07, 2024 4:42 pm
First post
For sale: 2 early cylinder head water outlets. Has Ford script and part number $25 each plus postage 20240607_135122.jpg 20240607_135122.jpg 20240607_135105.jpg
Last post
move to top
- 10 Replies
- 1958 Views
-
Last post by Melba Nolan
Mon Jun 17, 2024 1:38 pm
-
-
FS: Used Main bearing Cap Set (Reduced Price)
Replies: 4
by
WaltM » Thu Feb 22, 2024 1:30 pm
First post
For sale used main bearing cap set. Set includes front, center, and rear bearing caps. Also includes six original bolts (two short and four long) and nuts. Caps will need to be re-babbitted. Price $100 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
Last post
To the top
- 4 Replies
- 1274 Views
-
Last post by WaltM
Mon Jun 17, 2024 12:43 pm
-
-
FS Oilrite Lubricator AAA NOS
Replies: 1
by
BobP » Wed Apr 24, 2024 8:53 pm
First post
I think it is NOS. Very nice, the writing says oilrite lubricator, patented, pats pend, triple A,spec. co. Chicago, USA. I think it is cast aluminum? Has the original glass jar. $65+ shipping. NO TEXTING five07458677eight.
Last post
Bob, that is sharp.
If you still have it, could you measure the space between the mounting holes? Thanks!
- 1 Replies
- 690 Views
-
Last post by Tadpole
Mon Jun 17, 2024 9:43 am
-
-
Winfield Carburetor Adaptor
Replies: 1
by
ThreePedalTapDancer » Fri Nov 11, 2022 3:31 pm
First post
Original Winfield AA threaded carburetor adapter. 2-11/16 between center of holes. Stamped S52B. 75.00 includes shipping.
B176EB7A-52D8-4A8D-AC3F-5AFEBD81BCEB.jpeg
Last post
Hopped in the way back machine...did this sell?
- 1 Replies
- 974 Views
-
Last post by blauvelt
Sun Jun 16, 2024 5:25 pm
-
-
- 0 Replies
- 578 Views
-
Last post by Dweber
Sun Jun 16, 2024 2:49 pm
-
-
- 1 Replies
- 608 Views
-
Last post by ModelTWoods
Sun Jun 16, 2024 1:05 pm
-
-
WTB Stevens axle tool
Replies: 5
by
Woody23 » Fri Jun 14, 2024 7:24 am
First post
Hello, our local club is looking for a Steven axle repair tool. We are interested in any parts for this kit.
Please see photo.
Thank you
David
Last post
Yes sir, I will email you
- 5 Replies
- 1038 Views
-
Last post by Woody23
Sun Jun 16, 2024 9:03 am
-
-
FS: Locking Wood Rim Steering Wheel
Replies: 3
by
George House » Thu Jun 13, 2024 11:20 am
First post
17” diameter. Wood in beautiful shape. 2 Keys but lock is stuck. I’ll apply PB Blaster today and report results.
Only $150 + the ride… gwhouse731(at)gmail(dot)com
Yes; the PB Blaster worked. Key turned in ‘Sargent’ lock.
And the spiders are forged or cast metal
Last post
Thanks Shannon and MTFCA
- 3 Replies
- 846 Views
-
Last post by George House
Sun Jun 16, 2024 8:04 am
-
-
FS: ‘New and Improved’ Headlamp
Replies: 3
by
George House » Thu Jun 13, 2024 3:59 pm
First post
With original nickel on rim. Very shiny reflector. Don’t know if silvered or chromed. With perfect original fluted Ford script H lens. Just cleaning off shelf and dusting off parts. Only $95 + mailing. gwhouse731(at)gmail(dot)com Primarily for 1926
Bucket nicely painted gloss black…could be either left or right by turning rim 90*
Last post
Thanks Greg and MTFCA
- 3 Replies
- 700 Views
-
Last post by George House
Sun Jun 16, 2024 8:03 am
-
-
FS: Pair ‘New and Improved’ Headlamps
Replies: 3
by
George House » Thu Jun 13, 2024 3:53 pm
First post
Just cleaning off a shelf since I’m turning to brass Ts. Nicely painted buckets. Rims could use a repaint. Original fluted embossed Ford ‘H’ lenses. One very purple. Other turning purple. Very shiny reflectors. Don’t know if silvered or chromed. Only $195 pr + freight.
gwhouse731(at)gmail(dot)com
Last post
Only ‘btt’ this item until the ad falls into obscurity.
- 3 Replies
- 799 Views
-
Last post by George House
Sun Jun 16, 2024 6:53 am
-
-
- 0 Replies
- 517 Views
-
Last post by bmklawt
Sat Jun 15, 2024 5:49 pm
-
-
FS 1909
Replies: 1
by
T-Brass » Sat Jun 15, 2024 2:16 pm
First post
I have given up on my 1909 touring project. my first choice is to sell as a package $12500.00 or best reasonable offer
If the car does not sell with in two weeks. Then and only then I will start to part out the 1909
aluminum body touring car
1909 partial parts list
1909 model t aluminum body with all brackets and firewall redone by Ray Wells...
Last post
Anthony sent you a message
- 1 Replies
- 812 Views
-
Last post by JTT3
Sat Jun 15, 2024 3:14 pm
-
-
HCCT
Replies: 9
by
Melba Nolan » Mon Feb 05, 2024 11:21 pm
First post
20230714_191806.jpg 20230714_191840.jpg 20230714_191913.jpg For sale: a very good Allen Electric Co. tester. My Dad used it when he was rebuilding coils. Since he can no longer do that we are going to sell it.
$1500.00 with you picking up
email melbanolan@aol.com or text 314-575-7115 for pictures couldn't post anymore 20230714_191806.jpg
Last post
Thanks that was easy
- 9 Replies
- 2451 Views
-
Last post by Melba Nolan
Sat Jun 15, 2024 12:03 pm
-
-
Model A connecting rod mold
Replies: 1
by
Gene_French » Sun Mar 31, 2024 9:37 am
First post
Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...
Last post
to the top again , thanks MTFCA
- 1 Replies
- 636 Views
-
Last post by Gene_French
Sat Jun 15, 2024 10:12 am
-
-
FS: Left Outer Spindle Wheel Bearing
Replies: 5
by
George House » Thu Jun 13, 2024 11:07 am
First post
U.S. would say ‘drivers side’. Allan would say ‘passenger side’. 😜 Used. Superficial rust while on the shelf. Washed in gasoline. No bench wire brush or sandblast. Upper left, lower left and lower right Timkin 09075. Rest no markings.
Only $50 ea. mailing included…Plus free spindle nut…..gwhouse731(at)gmail(dot)com
Last post
Counter driver side wise threads ????????
Allan from down under.
- 5 Replies
- 758 Views
-
Last post by Allan
Sat Jun 15, 2024 9:07 am
-
-
Starter Block Off Plates NOS. FS
Replies: 7
by
Dan Hatch » Sat Jun 01, 2024 2:08 pm
First post
Here are 5 square starter block off plates. Look to be NOS, they were in a bunch of NOS parts. Extra to me. $7.50 each + shipping. Email me at address in pictures. Thanks Dan
IMG_3705.jpeg
IMG_3706.jpeg
IMG_0260.jpeg
Last post
Got two left, if you want one better get it.
- 7 Replies
- 957 Views
-
Last post by Dan Hatch
Sat Jun 15, 2024 5:48 am
-
-
3814. NOS. FS
Replies: 11
by
Dan Hatch » Sat May 25, 2024 12:12 pm
First post
Here are some Front Spring Hanger Bars for sale. There are marked Ford T 7648. Extra to me . $5.00 each + shipping.
Came out of a Ford Dealer many years ago. Email me at address in pictures. Thanks Dan
IMG_3651.jpeg
IMG_0260.jpeg
Last post
All gone. Thanks MTFCA
- 11 Replies
- 2395 Views
-
Last post by Dan Hatch
Sat Jun 15, 2024 1:42 am
-
-
toolbox SOLD
Replies: 2
by
Melba Nolan » Thu Jun 13, 2024 2:42 pm
First post
20220704_112921.jpg 20220704_112741.jpg 20220704_112859.jpg
For sale: small toolbox $50 plus shipping 20240615_110633.jpg 20240615_110559.jpg
Last post
Thanks for the Pictures . When I received the pictures I saw that the box you have for sale had tool tray mounted in the box . this makes it impossible to us it for a battery box ,witch was my intended use. So I hope you can Sale it to someone that can us it . I am no longer interested . Perry
- 2 Replies
- 959 Views
-
Last post by Perry Goble
Sat Jun 15, 2024 12:25 am
-
-
For sale: 1915 Rubes horn with 90 degree elbow
Replies: 1
by
Andrew Brand » Sat Jun 15, 2024 12:06 am
First post
For sale:
A Rubes horn in very nice unrestored condition. This has the diamond shaped mounting bracket which is specific to 1915. It also has the extremely hard to find 90 degree elbow which was used in early 1915 only. The horn has a few minor dents which would be easy to fix. One thumb screw for the rim is missing, and the small tube is loose...
Last post
2 more photos:
DSC_3611.JPG
DSC_3610.JPG
- 1 Replies
- 340 Views
-
Last post by Andrew Brand
Sat Jun 15, 2024 12:07 am
-
-
Brass hand air pump for gas tank F/S
Replies: 3
by
Layden Butler » Mon Jun 03, 2024 11:10 pm
First post
High quality all brass original teens era hand air pump to pressurize the gas tank, all brass never plated. $265, 48 state shipping $20.
Brass rim 1 3/4 white face gauge for instrument panel mounting (you just relabel to air or gas). $85, 48 state shipping $15 or free shipping with the pump.
New modern never used 5 pound gauge with 2 1/2 face....
Last post
This is what that pump will look like when polished. IMG_1731.jpg
Craig.
- 3 Replies
- 844 Views
-
Last post by Craig Leach
Fri Jun 14, 2024 6:16 pm
-
-
WTB: 26/27 Front Passenger Fender
by
signsup » Fri Jun 14, 2024 4:13 pm
Not looking for perfect, but we are not welders. So, so dings and dents OK, but no rips, tears or flat out rot. Trying to save some $$ over reproduction. Realize that s/h may be an issue for something this large and bulky, but not heavy. Final destination is Atl GA. Let me know if you have anything. My current fenders do not have the light bar...
- 0 Replies
- 472 Views
-
Last post by signsup
Fri Jun 14, 2024 4:13 pm
-
-
FS parts and tools
Replies: 4
by
KimDobbins » Thu Jun 13, 2024 8:43 pm
First post
Nice brass horn and original tube, the bracket needs repair. $150.00. Transmission band tool, hold all 3 bands in place while installing washers and nuts. $75.00. 4 good bearings, $30 each. Ford 5Z210 flywheel cap screw wrench, $20. Ford 5Z156 main bearing wrench, $20. Blackhawk 4418X 5/8 9/16 wrench, $10. All plus shipping. kdmks@att.net.
Last post
Yes, both are marked.
- 4 Replies
- 1105 Views
-
Last post by KimDobbins
Fri Jun 14, 2024 1:12 pm
-
-
Trade. Found
Replies: 2
by
Dollisdad » Thu Jun 13, 2024 6:53 pm
First post
1911-14 right side/1909-10 left side. Will trade either for a 1911-14 left side. IMG_9553.jpeg
Last post
Thanks George. I’ll send it to you and you can send yours back.
- 2 Replies
- 872 Views
-
Last post by Dollisdad
Fri Jun 14, 2024 10:20 am
-
-
Carburetor Petcocks - FS
Replies: 10
by
OldFord » Tue May 28, 2024 1:06 pm
First post
I have 7 petcocks for the Model T carburetor for sale. $15 each plus shipping. Can put them in a padded envelope to minimize shipping. 518-755-0986
Last post
Thx Darel.
- 10 Replies
- 2219 Views
-
Last post by Scott Rosenthal
Fri Jun 14, 2024 8:09 am
-
-
FS: Exhaust Cutout and Explosion Whistle
Replies: 2
by
George House » Thu Jun 13, 2024 4:05 pm
First post
Buy em together - not separately. Make that soothing steam train sound in parades. With floorboard pedal..
Only $110 + the ride… gwhouse731(at)gmail(dot)com
Last post
Thank you Don. I’ll send you an email…gh
- 2 Replies
- 581 Views
-
Last post by George House
Fri Jun 14, 2024 7:10 am
-
-
Wanted: Do you have this Sidelamp Bracket?
Replies: 1
by
Stephen1915 » Sat May 18, 2024 11:57 pm
First post
Looking for 1 OR a PAIR of these Sidelamp Brackets.
Anything would be helpful.
These fit Coupelets.
Pictures attached for reference.
Call, Text, Or Email
314-287-1901
stephensmail2001@gmail.com
Last post
Still looking
- 1 Replies
- 974 Views
-
Last post by Stephen1915
Thu Jun 13, 2024 4:23 pm
-
-
FS: Right Front Touring or Roadster Door
by
George House » Thu Jun 13, 2024 11:15 am
I’m sure it’ll fit ‘15-‘25. Sandblasted and in primer long ago. Door curvature nice but rust out top and bottom as in pictures. Only $45 + the ride. More pictures ? Just ask.
gwhouse731(at)gmail(dot)com
- 0 Replies
- 493 Views
-
Last post by George House
Thu Jun 13, 2024 11:15 am
-
-
Boss says “Let them go “ FS
Replies: 3
by
Dan Hatch » Fri Jun 07, 2024 6:19 pm
First post
Here are 4 fenders, all for one money.
3 are 23/25 Sedan right rears. 2 are NOS, just had a ruff life.
1 is 26/27 Touring, Sedan Left rear. Little ruff but there they are.
$50 for all 4 picked up here. Email me at email in pictures. Thanks Dan.
IMG_3715.jpeg
IMG_3716.jpeg
IMG_0260.jpeg
Last post
One more try before I cut the brackets off.
- 3 Replies
- 1167 Views
-
Last post by Dan Hatch
Thu Jun 13, 2024 10:51 am
-
-
26/27 two door front seat brackets ***SOLD***
Replies: 1
by
AndyClary » Wed Jun 12, 2024 9:35 pm
First post
Going through boxes found this set of seat brackets. Saw a set for $115 on eBay, sounds ridiculous. How about 30 bucks in a USPS box to you.
Andy
Last post
Forgot the photo.
B9A8DB27-14B0-4507-A37D-4CD9B902C4D3.jpeg
Andy
- 1 Replies
- 447 Views
-
Last post by AndyClary
Thu Jun 13, 2024 9:35 am
-
-
WTB Nickel headlight rings
Replies: 7
by
EricMac » Fri Jun 07, 2024 1:28 pm
First post
I am looking for nickel headlight rings for 26-27. I want the type that has the Ford script. Thanks!
Last post
Hi all, I appreciate the responses. I will keep everyone's contact info as I may still need one more.
Thanks so much.
- 7 Replies
- 1373 Views
-
Last post by EricMac
Thu Jun 13, 2024 6:26 am
-
-
WTB 1912 steering column
Replies: 3
by
T-Brass » Fri May 03, 2024 9:06 pm
First post
WTB 1912 steering column, thank you
PH 313 329 1958
Last post
Yikes! The odds of a random steering column being a 1912 are less than one in a hundred! Someone doesn't know what it looks like or the dimensions are?
- 3 Replies
- 819 Views
-
Last post by Wayne Sheldon
Thu Jun 13, 2024 1:53 am
-
-
WTB: Warner bubble lenz mate
Replies: 6
by
Larry LaPatka » Wed Jun 12, 2024 2:54 pm
First post
Looking for a mate to this lenz.
Outside diameter is 8 1/4”
Writing molded onto says:
Warner Lenz
Pat. June 25, 1912
D. 8 1/4 I.G.
Exact same writing not important as long as it’s the same bubble design. If only available in a pair, I’m not opposed to that.
Thanks MTFCA
Larry LaPatka
Parrottsville, Tennessee. 37843
Email: ltlapatka@gmail.com...
Last post
Looking for a mate to this lenz.
Outside diameter is 8 1/4”
Writing molded onto says:
Warner Lenz
Pat. June 25, 1912
D. 8 1/4 I.G.
Exact same writing not important as long as it’s the same bubble design. If only available in a pair, I’m not opposed to that.
Thanks MTFCA
Larry LaPatka
Parrottsville, Tennessee. 37843
Email: ltlapatka@gmail.com...
- 6 Replies
- 1040 Views
-
Last post by TRDxB2
Thu Jun 13, 2024 12:15 am
-
-
WTB ECCT
Replies: 8
by
Pat Branigan Wisc » Wed May 01, 2024 8:42 pm
First post
Just wondering if anyone has no more use for there HCCT before I purchase a new one. Thank you, Pat
Last post
FYI, ECCT, I-Timer and E-Timer Back in stock.
www.modeltecct.com
www.modeltitimer.com
www.modeltetimer.com
- 8 Replies
- 1729 Views
-
Last post by MKossor
Wed Jun 12, 2024 11:02 pm
-
-
1926 Model T Roadster Body for SALE!
Replies: 1
by
Kennyg26 » Wed Jun 12, 2024 9:26 am
First post
1926 Model T Roadster Body for SALE!
Turtle deck, quarters, seat frame, rails, cowl/firewall. Needs work.
Pickup Only in metro Detroit.
$400
DM me for questions/Interest
Last post
Kenny, I’m interested, sending an email
- 1 Replies
- 668 Views
-
Last post by schwabd1
Wed Jun 12, 2024 12:25 pm
-
-
- 0 Replies
- 678 Views
-
Last post by Dollisdad
Wed Jun 12, 2024 11:34 am
-
-
Original brass carb adjustment bezel SOLD
Replies: 1
by
Tbird » Sat May 04, 2024 12:06 pm
First post
This is an original angled brass bezel for the carb adjustment rod on the dash. This was taken off an original rod. Mine uses the stamped steel style of bezel and so I do not need this one. This would be correct for 11 or earlier. I show a side by side comparison of a repo and the original. $60 plus shipping
mikebird@lifeattheridge.net...
Last post
Round two.
- 1 Replies
- 788 Views
-
Last post by Tbird
Wed Jun 12, 2024 8:28 am
-
-
11-13 Carb adjusting rod SOLD
Replies: 1
by
Tbird » Mon Apr 29, 2024 4:10 pm
First post
This is the 11-13 reproduction adjusting to for the carb. It has a brass angled two hole bracket. $25 plus shipping
mikebird@lifeattheridge.net
IMG_1817.jpeg
IMG_1816.jpeg
Last post
Round two.
- 1 Replies
- 664 Views
-
Last post by Tbird
Wed Jun 12, 2024 8:25 am
-
-
Corcoran burner complete SOLD
Replies: 3
by
Tbird » Mon Feb 12, 2024 12:12 pm
First post
Here’s a nice burner for a Corcoran sidelight/taillight
The wheel is stamped Corcoran Cinti. O
Wheel turns really nice. $30 plus shipping
mikebird@lifeattheridge.net
IMG_1574.jpeg
IMG_1571.jpeg
IMG_1572.jpeg
IMG_1573.jpeg
Last post
Round four
- 3 Replies
- 1113 Views
-
Last post by Tbird
Wed Jun 12, 2024 8:23 am
-
-
E and J burner complete SOLD
Replies: 3
by
Tbird » Mon Feb 12, 2024 12:19 pm
First post
E and J burner. Turns freely and nicely. Wheel has a crack see photo. Vendors are currently out of stock.
Great for an original survivor. Included is an extra burner cover. $15 plus shipping
mikebird@lifeattheridge.net
IMG_1575.jpeg
IMG_1576.jpeg
IMG_1577.jpeg
Last post
Round four
- 3 Replies
- 1221 Views
-
Last post by Tbird
Wed Jun 12, 2024 8:22 am
-
-
SOLD!: Holley NH carburetor
Replies: 7
by
Walt Wise » Sun Jun 09, 2024 8:09 am
First post
Estate find. As the pictures show, carburetor completely disassembled, cleaning all parts thoroughly, new choke spring, polished and reseated needle, reconditioned spray needle, new mounting gasket. Carb only needs paint or clear coat if you choose? When cleaned down to bare metals like this, I sort of like clear coat. I oiled it a bit to prevent...
Last post
Carb has found a new home!
Thanks MTFCA!!!
Walt Wise
- 7 Replies
- 1377 Views
-
Last post by Walt Wise
Wed Jun 12, 2024 6:59 am
-
-
turtle deck reduced price
Replies: 4
by
Melba Nolan » Mon Jun 10, 2024 10:34 pm
First post
For sale: 1915 turtle deck. Good condition except one spot will need welded. $300 with pickup
20200618_170827.jpg 20200618_172358.jpg
20200618_170727.jpg 20200618_172829.jpg
Last post
ok I see that.
- 4 Replies
- 741 Views
-
Last post by Melba Nolan
Tue Jun 11, 2024 11:07 pm
-
-
WTB: Engine and trans
Replies: 2
by
jaybee47 » Mon Jun 10, 2024 8:08 pm
First post
WTB: Fully restored and operating starter engine with fully restored transmission. I prefer just the engine and transmission excluding the starter, generator, carburetor, manifolds, fan, etc. BUT my preference is not a requisite.
Last post
Thank you Nick. I'll call you tomorrow.
- 2 Replies
- 717 Views
-
Last post by jaybee47
Tue Jun 11, 2024 10:03 pm
-
-
WTB Front seat spring for 1916
Replies: 2
by
Belliott3 » Tue Jun 11, 2024 4:58 pm
First post
Does anyone have a decent front seat spring that will fit an early 16 touring?
Last post
I know, but I’m a T owner and therefore I cringe at the thought of spending $275 plus shipping if I can find a good usable one. In the end, I may have to,
- 2 Replies
- 641 Views
-
Last post by Belliott3
Tue Jun 11, 2024 7:36 pm
-
-
Tire Tube Stem Covers F/S
by
Layden Butler » Tue Jun 11, 2024 6:03 pm
Set of 4 tube stem covers with rim nuts, these are made of brass and nickel plated, could be stripped to bare brass. $50, domestic shipping $10.
- 0 Replies
- 573 Views
-
Last post by Layden Butler
Tue Jun 11, 2024 6:03 pm
-
-
fS Stevens T 149 rear axle assembly fixture
Replies: 1
by
KimDobbins » Tue Jun 11, 2024 1:20 pm
First post
Real nice Stevens rear axle stand. Bolt this fixture to your work bench and assemble or disassemble your rear axle. $175.00 plus shipping. kdmks@att.net.
Last post
Tool has been sold.
- 1 Replies
- 595 Views
-
Last post by KimDobbins
Tue Jun 11, 2024 5:57 pm
-
-
13-25 running boards fs.
Replies: 1
by
CTLeonard » Sat May 25, 2024 9:51 am
First post
Good straight boards. Holes are still square. Some light pitting, not a perfect pair, but very usable for a 100 year old car. 125.00 plus shipping. Ctleonard64@ Gmail.com IMG_20240525_084452689.jpg IMG_20240525_084511298.jpg IMG_20240525_084519009.jpg
Last post
Xxxxxxxxxx
- 1 Replies
- 551 Views
-
Last post by CTLeonard
Tue Jun 11, 2024 5:22 pm
-
-
Looking for 1 early frt. fender iron
by
Dollisdad » Tue Jun 11, 2024 2:50 pm
Like this with the dip on top and round on the bottom side. IMG_9521.jpeg IMG_9524.jpeg
Not like the later ones, like this. Flatter on top and V shaped on the bottom. IMG_9523.jpeg IMG_9522.jpeg Thanks
- 0 Replies
- 448 Views
-
Last post by Dollisdad
Tue Jun 11, 2024 2:50 pm
-
-
WTB. Running Board Brackets
Replies: 7
by
GG Gregory » Sun Feb 25, 2024 11:47 am
First post
I’m looking for a set of pre 26-27 cast running board brackets for a garage display project.
Last post
I have 2 running board brackets!
The holes for the boards is 5 inches, so they are for the older style.
I live in Michigan. My cel# is 1-231-250-5346. or. jimmieclint@gmail.com
$20 for the pare + shipping
- 7 Replies
- 1371 Views
-
Last post by Jimmie
Tue Jun 11, 2024 1:27 pm
-
-
Alternator F S
Replies: 4
by
elliott1936 » Sat Jun 08, 2024 5:24 pm
First post
Good condition alternator for sale. $100.00 plus the cost of shipping, which should be about $30.00 Contact Tom Elliott Five03-644-937Four, Or E-mail to twoelliott@msn.com
Last post
Yes the alternator is sold. Tom
- 4 Replies
- 1028 Views
-
Last post by elliott1936
Tue Jun 11, 2024 12:45 pm
-
-
WTB used wire wheel hub caps
Replies: 3
by
Dennis Prince » Sun Jun 09, 2024 10:38 pm
First post
I am looking for a set of wire wheel hub caps. I don't want them to be to nice, nice patina would be great, maybe some that you took of to do a restoration. Thanks, Dennis
Last post
I have hub caps coming. I am always amazed by the Model T community. They are always willing to share their time, resources and knowledge with whoever needs help. Thank you, Robert.
- 3 Replies
- 1005 Views
-
Last post by Dennis Prince
Tue Jun 11, 2024 12:38 pm
-
-
FS NEW ASSEMBLED RUCKSTELL AXLE
Replies: 5
by
Mark Chaffin » Thu Mar 07, 2024 4:57 pm
First post
I built this Ruckstell for a project I am no longer pursuing. Specifics are as follows:
* Complete new Ruckstell kit (26/27)
* New axle shafts, NOS axle gears, ring gear, bearings, sleeves, etc.
* Shortened driveshaft tube and radius rods for Layne Warford. New driveshaft, bearings, bushings, and 12 tooth pinion.
*Dan McEachern juice brakes and...
Last post
The reversed main leaf was purchased.
- 5 Replies
- 2127 Views
-
Last post by Mark Chaffin
Tue Jun 11, 2024 9:35 am
-
-
Wanted: 1915/1916 Certain Parts
Replies: 9
by
Stephen1915 » Mon Jun 10, 2024 9:04 am
First post
•I am looking for an original (nice condition) gas tank cap that is correct for 1915/1916 and possibly other years.
•Looking for a Hot Air Pipe in nice condition for the same years.
•In need of a 1915-1917 Steering column, and horn button!
Thanks!
Text or Call 314-287-1901
Last post
I have a steering column for the 15-16, most do not know they are different, how long both levers are. Tiffin Ohio
- 9 Replies
- 1380 Views
-
Last post by Joe Bell
Tue Jun 11, 2024 6:37 am
-
-
WTB Iron water pump
Replies: 4
by
Bryce S. » Fri Oct 13, 2023 8:17 pm
First post
I am wanting to do away with the aluminum water pump on my T due to it constantly reacting with the iron block and causing that fun chemical reaction that ruins everything. Are there any good iron ones out there that would be a good replacement that one would consider selling me? And yes..... I know everyone thinks I should do it the way Henry...
Last post
I have couple of different water pumps. Both spin
One has a broken mount casting - I have the piece - it could be brazed.
I live in Michigan.
- 4 Replies
- 1072 Views
-
Last post by Jimmie
Mon Jun 10, 2024 10:28 pm
-
-
WTB: 1912 early frame.
Replies: 2
by
michaelb2296 » Fri Apr 19, 2024 10:47 am
First post
It would be nice to find one in good shape!
Michael
Last post
I have a frame that I have been told is a 1914 - 1916. It has surface rust but is very solid!
I can send photos. I live in Michigan.
1-231-250-5346
- 2 Replies
- 762 Views
-
Last post by Jimmie
Mon Jun 10, 2024 10:09 pm
-
-
WTB 26/27 Steering shaft
Replies: 2
by
Tbird » Tue Apr 16, 2024 9:37 pm
First post
Looking for a loose 26/27 steering shaft. Doesn’t have to have the mounting bracket or pitman arm.
mikebird@lifeattheridge.net
Last post
I have a steadiness shaft but I am not sure of the year.
Can you give me some details I should.look for and I will get back to you.
Jimmieclint@gmail.com
231-250-5346. Iive in Michigan
- 2 Replies
- 690 Views
-
Last post by Jimmie
Mon Jun 10, 2024 9:55 pm
-
-
***SOLD***FOR SALE - 1911 / 1912 Engine
Replies: 15
by
Lcjudge » Fri Jun 07, 2024 8:26 pm
First post
If you've got an early T here's an engine for you. According to the T SN listing, this engine was in a car sold in Dec. 1911. There isn't a casting date on the engine (that I've found). The SN on it is 88211, So this was probably in a 1912 Model year car. However, it could have been in an 11 sold late. Here in Ky we didn't have a title law until...
Last post
Richard,
It looks like you were able to pick up a nice engine for a very reasonable price! If you are planning on building it up as an authentic 1911/1912 engine as possible, then you are probably going to need to find a correct 1911/1912 pan. Mike Bird's reply provided some good pictures of the correct pan for that era, and the first pictures of...
- 15 Replies
- 2828 Views
-
Last post by NealW
Mon Jun 10, 2024 3:53 pm
-
-
FS Samson Tiger Manual Ahooga Horn
Replies: 6
by
ThreePedalTapDancer » Tue Jan 09, 2024 6:05 pm
First post
Rare Samson Tiger non-electric manual ahooga horn. Excellent condition. This unique horn utilizes a fluted knob instead of a plunger. Works great. The fluted knob is simply turned and with each twist, the horn emits a very loud “ AaaaaWhooo!” Very nice horn with nice paint. 11 inches long, 5 inch diameter bell. Ready to mount and use. 225 includes...
Last post
225 includes shipping.
- 6 Replies
- 1663 Views
-
Last post by ThreePedalTapDancer
Mon Jun 10, 2024 11:28 am
-
-
Wanted: 1915-16-17 Horn Button
by
Stephen1915 » Mon Jun 10, 2024 11:19 am
Figured I’d make a separate post for this to hopefully reach more folks.
I’m looking for a decent useable horn button for the early magneto horn cars. I know these can be elusive!
Included are some photos from past forum post.
Call or text 314-287-1901
- 0 Replies
- 496 Views
-
Last post by Stephen1915
Mon Jun 10, 2024 11:19 am
-
-
NOS Norman Rockwell Puzzle FS
Replies: 1
by
Dan Hatch » Sun Jun 09, 2024 3:28 pm
First post
Here is another unopened Ford 50th Anniversary puzzle. These were made from Rockwell paintings that he did for the 50th anniversary of Ford. Not sure of date these were made, but no bar code. $35 + shipping. Email me at address in pictures. Thanks Dan
IMG_3717.jpeg
IMG_0260.jpeg
Last post
Spoken for. Thanks MTFCA
- 1 Replies
- 502 Views
-
Last post by Dan Hatch
Sun Jun 09, 2024 7:24 pm
-
-
#2 Rockwell NOS puzzle FS
Replies: 1
by
Dan Hatch » Sun Jun 09, 2024 3:34 pm
First post
Here is another Rockwell puzzle made from a different Ford 50th Anniversary print. This one is showing Henry in his workshop building his first car. It is unopened so it is NOS. Not sure when it was made, but no bar code. $35 + shipping. Email me at address in pictures. Thanks Dan.
IMG_3719.jpeg
IMG_0260.jpeg
Last post
Spoken for Thanks MTFCA
- 1 Replies
- 415 Views
-
Last post by Dan Hatch
Sun Jun 09, 2024 7:24 pm
-
-
exhaust cut out. S O L D
Replies: 2
by
aDave » Sat Jun 01, 2024 4:14 pm
First post
Exhaust cutout with actuating pedal. S O L D
Do you mind looking at
yes, it's mine...with pictures. I am challenged when it comes to posting pictures here.
Dave
Last post
Dave,
It says this listing is no longer available.
- 2 Replies
- 1012 Views
-
Last post by mtntee20
Sun Jun 09, 2024 3:44 pm
-
-
- 0 Replies
- 648 Views
-
Last post by Layden Butler
Sun Jun 09, 2024 2:45 pm
-
-
Nickel valve stem cover package
Replies: 4
by
EricMac » Sun Jun 02, 2024 4:49 pm
First post
I have a set of dust covers for valve stems. The will need to go with metal stem tubes. They would be just the right finishing touch for a nickel era speedster. You will get everything you see in the first photo. $75.00 or best offer, US continental shipping included. Thanks!
Eric Macleod 20240602_163618.jpg 20240602_163634.jpg 20240602_163732.jpg
Last post
I’ll have to look and see if I’ve got any laying around
- 4 Replies
- 1220 Views
-
Last post by Tadpole
Sun Jun 09, 2024 11:40 am
-
-
FS: Used 1926-27 Spindles SOLD
Replies: 1
by
Rodger Erickson » Sun Jun 09, 2024 9:58 am
First post
FS: One pair 1926-27 Spindles. These look usable, except one is missing the bushings and one is missing the arm. SOLD!
27spdl01.jpg
27spdl02.jpg
27spdl03.jpg
Thanks for looking!
Last post
Roger:
sent email regarding purchase ...Gene French
- 1 Replies
- 550 Views
-
Last post by Gene_French
Sun Jun 09, 2024 10:23 am
-
-
Pre-war swap meet, northern Colorado
Replies: 1
by
Lil Teezy » Fri Jun 07, 2024 11:59 am
First post
I almost whiffed the swap meet happening tomorrow morning but luckily I caught on last minute. It’s at a great location with a history museum and easy access. All the cool kids were there last year! Unfortunately I don’t have time to set up a space, but will be attending no doubt. I’m feeling Mr. Archers’ recent post about swap meet attendance and...
Last post
Chris:
the meet was small this year , severe weather had been forecast for Saturday ...there were some interesting items at the meet and had good visits with many vendors and buyers including our old friend Dave Huson ... most vendors had packed up and left the site by 1:00 as dark clouds moved in... i did get into a thunder storm with heavy rain...
- 1 Replies
- 637 Views
-
Last post by Gene_French
Sun Jun 09, 2024 10:18 am
-
-
SOLD: 3 gear Bosch front drive
Replies: 2
by
blauvelt » Sat Jun 08, 2024 3:09 pm
First post
Please see pictures.
$225.00 delivered OBO lower 48.
Last post
Sold to the gentleman from Albany, MN!
- 2 Replies
- 916 Views
-
Last post by blauvelt
Sun Jun 09, 2024 9:39 am
-
-
FS Tools Bearings Carbs
Replies: 13
by
KimDobbins » Thu Jun 06, 2024 5:28 pm
First post
Email for more pictures. All plus shipping kdmks@att.net.
Last post
Perch puller is sold
- 13 Replies
- 2207 Views
-
Last post by KimDobbins
Sun Jun 09, 2024 12:13 am
-
-
Schrader 777
Replies: 2
by
Kevin Pharis » Sat Jun 08, 2024 3:25 pm
First post
Just tore down an old tire and saved this tube stem for some reason. You can have it for the $12 it will take to have USPS get it to you in the lower 48
IMG_2400.jpeg
Last post
It’s heading to Walt!
- 2 Replies
- 905 Views
-
Last post by Kevin Pharis
Sat Jun 08, 2024 4:51 pm
-
-
Denman 6.00-20 tire
by
Kevin Pharis » Sat Jun 08, 2024 3:32 pm
Don’t the later TT’s use this size…? Really nice (old) Denman tire just removed from a rim that looks to have been restored in the 80’s. No noticeable cracking or damage. $50 plus shipping
IMG_2401.jpeg IMG_2402.jpeg IMG_2403.jpeg IMG_2404.jpeg
- 0 Replies
- 727 Views
-
Last post by Kevin Pharis
Sat Jun 08, 2024 3:32 pm
-
-
FS 12-13 Slant Top KW Coil Box (SOLD)
by
ThreePedalTapDancer » Sat Jun 08, 2024 3:05 pm
Reproduction KW 12-13 slant top coil box. This is a well-made, unused, bare reproduction coilbox that was sized especially for the common later coils, that fit nice and snug. It is pre-drilled and ready to be assembled with your common coilbox hardware and contacts, and lunchbox style latches. It has a nice stain and finish, no damage, and is...
- 0 Replies
- 661 Views
-
Last post by ThreePedalTapDancer
Sat Jun 08, 2024 3:05 pm
-
-
- 5 Replies
- 911 Views
-
Last post by BobP
Fri Jun 07, 2024 8:45 pm
-
-
SOLD Prest-O-Lite regulator - earliest style - Prestolite
Replies: 4
by
Erik Johnson » Fri Jun 07, 2024 2:28 pm
First post
Sold - pending receipt of payment
Prest-O-Lite regulator
I believe this is the earliest style
Patent date 1910
$125 plus shipping
Or, I can deliver to the Sunday, June 9, 2024 Model T Ford swap meet at the Dakota County Fairgrounds in Farmington, MN
Last post
Tried to reply to your private message a second time and the recipient box doesn't populate and there is the following below the box, Some users couldn’t be added as they have disabled private message receipt.
Also, pulled up your profile and there's not way to send private message that route.
I'll send you an email.
- 4 Replies
- 899 Views
-
Last post by Erik Johnson
Fri Jun 07, 2024 7:41 pm
-
-
Wanted: Brass era licence plate / tail light bracket like Neverout
Replies: 9
by
neilson604 » Wed Jun 05, 2024 2:47 pm
First post
I'm looking for a period accessory license plate / tail light bracket for our big 1908 Welch touring car. Patent dates may go later.
Anything like the brass Neverout or other period examples would compliment the car. Example on an EMF shown.
hhneilson@gmail.com
Last post
Eric,
If I understand Harry correctly, He was concerned about the receiver and this bracket would work for the spade or post. The picture you posted shows the spade and post for hanging the light. The picture Harry posted has a light that would use the spade and not the post.
- 9 Replies
- 1760 Views
-
Last post by Larry
Fri Jun 07, 2024 6:34 pm
-
-
SOLD: Large Black and Nickel Bulb Horn Assembly from 1911-1914
Replies: 3
by
GGZ » Fri Mar 29, 2024 9:57 am
First post
SOLD to Jim in New York!
This is a very nice, early black and nickel bulb horn assembly that is from 1911 through 1914'ish. It is complete with the horn, horn mounting bracket, tubes, tube bracket, reed, etc. The horn itself is about 4 1/2 wide by 9 tall and the tubing is about 50 long. The horn appears to be original including the paint and the...
Last post
SOLD......
- 3 Replies
- 1019 Views
-
Last post by GGZ
Fri Jun 07, 2024 6:14 pm
-
-
1912 Holley Carburetor (SOLD)
Replies: 8
by
ThreePedalTapDancer » Mon May 06, 2024 5:16 pm
First post
Rare 1912 year Holley H1 4500 carburetor. This is a very clean and complete carburetor. Needs to be rebuilt. Includes the float, all internals, and a CRACK FREE brass bowl. It even has the correct original fuel line fitting. The internal venturi is still solid. Needs standard rebuild, including re-bushing the throttle shaft, new or modern float,...
Last post
Didn’t Stan post something about how he got that look with his ultrasound tank a few years ago.
Dan, I have an Vevor Ultrasonic tank that I generally use a degreaser in such as Awesome or Simple Green. It will do a great job of getting it degreased however it would take a special chemical to make it look like that. You really should get or make...
- 8 Replies
- 1980 Views
-
Last post by BRENT in 10-uh-C
Fri Jun 07, 2024 4:44 pm
-
-
- 0 Replies
- 487 Views
-
Last post by Stillwell
Fri Jun 07, 2024 12:19 pm
-
-
brass steering gear case Reduced price
Replies: 6
by
Melba Nolan » Sat Nov 04, 2023 11:57 pm
First post
For sale: Brass steering gear case. Needs cleaned and polished.. $100 plus postage.
20220825_134343.jpg 20220825_134421.jpg 20220825_134437.jpg 20220825_134351.jpg
Last post
move to top
- 6 Replies
- 1605 Views
-
Last post by Melba Nolan
Thu Jun 06, 2024 11:05 pm
-
-
W T B early water outlet 09-15
Replies: 2
by
Burlingtontguy » Fri May 31, 2024 10:26 pm
First post
I need an early Water outlet to finish my 1911 roadster, I could use 2 as I have 1914 Ambulance to also finish, Call or E-mail
401-932-3191 Thanks, Dennis
Last post
I have some, Bob
- 2 Replies
- 759 Views
-
Last post by FATMAN
Thu Jun 06, 2024 2:00 pm
-
-
Valve tools FS
Replies: 6
by
Dan Hatch » Sat Jun 01, 2024 3:29 pm
First post
Found these in a bucket of stuff. $7.50 + shipping for the pair. Email me at address in the pictures. Thanks Dan
IMG_3708.jpeg
IMG_0260.jpeg
Last post
Thanks Frank. Ship address for the petcock with the T handle is
919 Mt. Hope Ave. Cinti, Ohio 45204
Please shoot me your address and total with shipping. Please do not use MTFCA messaging system, as mine either doesn't work or I have screwed something up so that it doesn't work properly.
Regards,
Scott
- 6 Replies
- 1156 Views
-
Last post by Scott Rosenthal
Thu Jun 06, 2024 1:36 pm
-
-
Stewart speedometer mounting bracket wanted
Replies: 2
by
Layden Butler » Sat Apr 13, 2024 1:55 pm
First post
Bracket needed to mount my Stewart speedometer head to a wooden firewall. Any of these pictured would work, brass or iron, or any other style. Thanks for looking.
Last post
I've sent an email
- 2 Replies
- 787 Views
-
Last post by John A Kelso
Thu Jun 06, 2024 12:04 pm
-
-
Winfield carburetor mounting flange F/S
by
Layden Butler » Wed Jun 05, 2024 7:19 pm
Nice original Winfield aluminum mounting flange marked S64BB1, this takes an S or SR Winfield carburetor size BB and adapts it to an SAE 1 1/4 manifold ( 2 holes on 2 11/16 centers), has a vacuum tap with plug in it that can be used if desired. $85. 48 state shipping $10.
- 0 Replies
- 568 Views
-
Last post by Layden Butler
Wed Jun 05, 2024 7:19 pm
-
-
Reliance tachometer
Replies: 3
by
Layden Butler » Thu May 09, 2024 11:51 pm
First post
3 1/2 face Reliance tachometer, nice porcelain face and plated solid brass construction, change the face numbering to whatever range you want and gear the drive pickup ratio to your engine speed.
Last post
Any interest
- 3 Replies
- 961 Views
-
Last post by Layden Butler
Wed Jun 05, 2024 3:38 pm
-
-
WTB Kingston Carburetor
Replies: 8
by
desertexplorer » Mon Jun 03, 2024 5:23 pm
First post
Looking for a Kingston L-2 updraft carburetor for a project I’m working on.
Thanks!
Last post
Looking for a Kingston L-2 updraft carburetor for a project I’m working on.
Thanks!
Updraft L2
- 8 Replies
- 1436 Views
-
Last post by speedytinc
Wed Jun 05, 2024 2:43 pm
-
-
Vintage Ford Magazines
by
Erik Johnson » Wed Jun 05, 2024 1:33 pm
144 issues of Vintage Ford published by the Model T Ford Club of America
$50 for the entire collection
Local pick up in south Minneapolis or I can deliver them to the Sunday, June 9, 2024 Model T Ford Reunion/swap meet at the Dakota County Fairgrounds in Farmington, MN.
Years, volumes and issue numbers listed below:
1969 - Volume 4: 3, 4, 5...
- 0 Replies
- 638 Views
-
Last post by Erik Johnson
Wed Jun 05, 2024 1:33 pm
-
-
WTB Original Rocky Mountain parts.
Replies: 7
by
Original Smith » Mon Jun 03, 2024 1:15 pm
First post
Does anyone have these parts laying around? Could use more!
Last post
If you are willing to make the pull rod bolt for the brake pedal, and can make it out of tool steel I can supply another photo, and the exact dimensions.
I know of several guys who need this part.
- 7 Replies
- 1473 Views
-
Last post by Original Smith
Wed Jun 05, 2024 1:33 pm
-
-
1925 model t rolling-running chassis-SOLD
Replies: 5
by
Edy » Sun Jun 02, 2024 8:00 pm
First post
Running and rolling chassis with new tires mounted on it was 3000.00 now...4000.00 asking price sitting in Morristown Tennessee posting for a friend ... Robert 423-327-3788.... price has increased due to Robert adding a lot more parts... this was a complete running and driving 1925 two door and all he wanted was the body .... it has nice seats in...
Last post
Could not get pictures to download... and the price has increased because he added a lot more pieces... fenders and interior parts seat cushions and other stuff
- 5 Replies
- 1101 Views
-
Last post by Edy
Wed Jun 05, 2024 11:43 am
-
-
FS: 1926-1927 Wiring Looms (Switch & Commutator) Sold
Replies: 5
by
Rodger Erickson » Mon May 20, 2024 11:59 pm
First post
For sale: One reproduction Switch wiring harness and one commutator wiring harness for a 1926-1927 Model T Ford. These were made some years ago but never used. Asking $20 for both, not including shipping.
t26wrg01.jpg
Thanks for looking!
Last post
I would like to buy this can you call me on how to pay for this my zip is 60177 Joe 1-773-965-5483
- 5 Replies
- 1183 Views
-
Last post by Joer357
Wed Jun 05, 2024 10:59 am
-
-
Weaver tricycle jack plus parts jack
Replies: 2
by
JH1427 » Sun Jun 02, 2024 4:19 pm
First post
$400.00
I can for no additional cost deliver to the Denver Swap meet Saturday the 8th. This is the larger Weaver twin post, tricycle jack. Use the send message thru here to contact me. Too many scammers. Jerry
Last post
Email sent
- 2 Replies
- 911 Views
-
Last post by South Park Zephyr
Wed Jun 05, 2024 9:50 am
-
-
Bermuda bell FS
Replies: 1
by
Nv Bob » Mon Jun 03, 2024 11:43 pm
First post
Sutone brand Bermuda bell I believe 1950's but has great sound
$200 to your door in 48 states
Bob
Sparks Nv
Jalopyt@yahoo.com
Last post
Bob, Sent an email.
- 1 Replies
- 771 Views
-
Last post by mtntee20
Tue Jun 04, 2024 4:21 pm
-
-
Hayes RB tool box FS
Replies: 1
by
Nv Bob » Mon Jun 03, 2024 11:47 pm
First post
Pending sale
Nice solid tool box by hayes see pics
15L x 8T x 7W
125 obo + shipping
Bob
Jalopyt@yahoo.com
Last post
Morning, Bob,
Sent you an email.
Thanks,
Ron in HSV
- 1 Replies
- 654 Views
-
Last post by CDooREDW
Tue Jun 04, 2024 10:34 am
-
-
Cal 15T plate SOLD
Replies: 1
by
Nv Bob » Mon Jun 03, 2024 11:51 pm
First post
SOLD SOLD SOLD
can't use these 15 touring title with CA horseless Carriage plates
Last date on title 1973collectors piece or use on the t Chassis or car needing a title $250+ postage o
Last post
Sent you an email.
- 1 Replies
- 631 Views
-
Last post by Charlie_26_TT_Ccab
Tue Jun 04, 2024 1:19 am
-
-
Set wood bands 26-7 fs
by
Nv Bob » Mon Jun 03, 2024 11:40 pm
Set of wood bands 26-7 should be complete
$95 to your door in 48 states
Bob Sparks Nv
Jalopyt@yahoo.com
- 0 Replies
- 515 Views
-
Last post by Nv Bob
Mon Jun 03, 2024 11:40 pm
-
-
- 0 Replies
- 651 Views
-
Last post by blauvelt
Mon Jun 03, 2024 9:34 pm
-
-
15-16 rear pass rear door hinge plate
Replies: 1
by
Campbell Tellman » Mon Jun 03, 2024 3:19 pm
First post
Hey All!
Working on my 1916 touring car. Sheet metal where rear door hinge attaches through sheet metal into wood frame is messed up. Would someone be able to cut off six inches and sell it to me? Maybe I could explain it better in a phone call.
Campbell Tellman II
Beaufort, NC
252-528-0093
Last post
I may have that email me a pic of the area in question so I can see what you need
- 1 Replies
- 393 Views
-
Last post by Karl Von Neumann
Mon Jun 03, 2024 9:02 pm
-
-
Wanted: rear fender mount
Replies: 10
by
Will_Vanderburg » Mon May 27, 2024 3:53 pm
First post
I’m looking for a rear fender mount rod that screws into the rear quarter pillar for a Centerdoor Sedan.
You’d think the ones for tourings were the same, but they are not. They are 1/2 inch shorter than CD ones.
I thought I had found one at Luray, but alas, it is too short. (Only paid $5 for it, so no big loss)
The threads on the end are all...
Last post
Ok I’ll break out the BFH!
:D
- 10 Replies
- 2758 Views
-
Last post by Mark Gregush
Mon Jun 03, 2024 8:29 pm
-
-
For Sale: Stevens Front Axle Tool Frame
Replies: 1
by
Ed Fuller » Mon Jun 03, 2024 6:27 pm
First post
For Sale: Stevens Front Axle Tool Frame.
I’m not an expert on these, but I’m pretty sure this is an original and not a reproduction. I only have what’s shown in the pictures. The “T” handle turns and threads look fine.
$250 plus shipping in the U.S.A.
IMG_4318.jpeg
IMG_4319.jpeg
IMG_4320.jpeg
IMG_4321.jpeg
Last post
I will buy it!
- 1 Replies
- 643 Views
-
Last post by Rajo23
Mon Jun 03, 2024 7:06 pm
-
-
Sold: Sherman speed equipment - head, sump, block and dual spark head
Replies: 3
by
blauvelt » Sun Jun 02, 2024 11:54 am
First post
SOLD
Sherman Super Fire dual spark head (probably >8:1, possible 10:1)
Sherman tapper cover
Sherman 4 dip deep sump
Custom Sherman 8 port block
SOLD + shipping from Tucson, AZ. may deliver depending on location.
Last post
$1500 sounds like a great deal to me. It would take a fellow a good amount of time to round up all 4 parts . I have never seen an engine block like this for sale even. If I did not already own an NOS head exactly like this, I would go for this package ! ( I am just sayin') :-) -Dusty
- 3 Replies
- 1142 Views
-
Last post by DustySpokes
Mon Jun 03, 2024 1:53 pm
-
-
WTB: Pair speedster bucket seats
by
skyhunter » Mon Jun 03, 2024 1:07 am
Looking for a pair of bucket seats for a speedster, shells are fine. Preferably in the northeast. The ride from CA is just too cost prohibitive.
- 0 Replies
- 516 Views
-
Last post by skyhunter
Mon Jun 03, 2024 1:07 am
-
-
Wanted To Buy A Texas T Distributor Adapter
Replies: 1
by
J1MGOLDEN » Sun Jun 02, 2024 5:43 pm
First post
I need a Texas T Distributor Adapter with a good internal shaft or a good internal shaft. Jim golden, Bowie, Maryland
Last post
Have you called Birdhaven? I have bought shifts from them before! And actually a better design than the original! One pice not two!
- 1 Replies
- 540 Views
-
Last post by Tmooreheadf
Sun Jun 02, 2024 9:12 pm
-
-
For Sale: PRICE REDUCED! Stewart Warner Hand Operated Tachometer
Replies: 5
by
GGZ » Sat Jan 13, 2024 1:32 pm
First post
PRICE REDUCED: 75.00 postpaid in the USA!
This Stewart Warner Hand Operated Tachometer is probably from the 1950s. It is New Old Stock and includes two rubber tips and the original instructions in the original envelope. It measures about 2 3/4 inches in diameter. A great piece to measuring revolutions per minute (R.P.M.). A collectible that is a...
Last post
Reduced to 75.00 postpaid in the USA!
- 5 Replies
- 1543 Views
-
Last post by GGZ
Sun Jun 02, 2024 3:26 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
