Classifieds - Parts - Page 39

Classifieds - Parts

New Topic

9200 topics

Page 39 of 92
- Jump to page:
Previous
1
…
37
38
39
40
41
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79251 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS ENGINE PAN SET (12-14) SOLD

Last post by Mark Chaffin « Thu May 02, 2024 7:07 pm
Replies: 1
by Mark Chaffin » Thu May 02, 2024 6:01 pm

First post

Engine pan set (12-14). Reproductions are $220. Get this set for $100 plus domestic shipping. Mark Chaffin (951) 805-0928

12 to 14 Pans.jpg

Last post

Sold to Bill. Thank you

1 Replies

330 Views

Last post by Mark Chaffin
Thu May 02, 2024 7:07 pm
FS BRAKE BACKING PLATE SET (26/27) SOLD

Last post by Mark Chaffin « Thu May 02, 2024 7:06 pm
Replies: 1
by Mark Chaffin » Thu May 02, 2024 6:11 pm

First post

Nice pair of original brake backing plates (26/27) $30.00 for the pair plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20240502_141330 (1).jpg

Last post

Sold to Bill. Thank you.

1 Replies

279 Views

Last post by Mark Chaffin
Thu May 02, 2024 7:06 pm
FS transmission bands with removeable ears

Last post by John Haynes « Thu May 02, 2024 6:50 pm

by John Haynes » Thu May 02, 2024 6:50 pm

For Sale are sets of transmission bands with removeable ears. I have 4 sets of the wide brake band and two sets of the narrow brake band. $35.00 per set plus shipping. Please email if interested.

0 Replies

409 Views

Last post by John Haynes
Thu May 02, 2024 6:50 pm
FS ENGINE PAN SET (19-27)

Last post by Mark Chaffin « Thu May 02, 2024 6:03 pm

by Mark Chaffin » Thu May 02, 2024 6:03 pm

Very nice engine pan set (19-27) in primer. Reproductions are $220. Get this set for $100 plus domestic shipping. Mark Chaffin (951) 805-0928

19 to 27 Pans.jpg

0 Replies

328 Views

Last post by Mark Chaffin
Thu May 02, 2024 6:03 pm
FS NOS coil box

Last post by KimDobbins « Thu May 02, 2024 5:20 pm
Replies: 2
by KimDobbins » Sat Apr 27, 2024 9:55 pm

First post

NOS never used model T coil box. $125.00 plus postage. kdmks AT att.net.

Last post

Box is sold

2 Replies

919 Views

Last post by KimDobbins
Thu May 02, 2024 5:20 pm
FS. Nice original/accessory tail lights

Last post by Larry « Thu May 02, 2024 4:54 pm
Replies: 1
by Larry » Thu May 02, 2024 2:45 pm

First post

FS. Nice original accessory Electric tail light assembly.
Just cleaned tested and working. Nice original sockets. Contacts cleaned and new bulbs.
The reflector and lenses are in beautiful condition for the age.
Price $150+ shipping.

IMG_7410.jpeg

IMG_7411.jpeg

IMG_7412.jpeg

IMG_7414.jpeg

Last post

Sold,
Thank You,
Larry

1 Replies

436 Views

Last post by Larry
Thu May 02, 2024 4:54 pm
FS AA TON TRUCK REAR WIRE WHEEL HUB PULLER (SOLD)

Last post by Mark Chaffin « Thu May 02, 2024 2:45 pm
Replies: 2
by Mark Chaffin » Wed May 01, 2024 7:41 pm

First post

AA TON TRUCK rear wire wheel hub puller $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_142708.jpg

20240501_142724.jpg

Last post

Sold to Charlie. Thank you

2 Replies

472 Views

Last post by Mark Chaffin
Thu May 02, 2024 2:45 pm
LOOKING for a Complete set of Rocky Mountain Brakes for sale?

Last post by CudaMan « Thu May 02, 2024 12:36 pm
Replies: 1
by avent40 » Thu May 02, 2024 12:31 pm

Hi, I am Tony, I am getting some work done on my Model T and we cant locate a place to purchase a set of Rocky Mountain brakes for my Model t, can anyone help me please? Thanks! God Bless!

1 Replies

805 Views

Last post by CudaMan
Thu May 02, 2024 12:36 pm
SOLD: Old '14 brass radiator

Last post by Karl Von Neumann « Thu May 02, 2024 11:00 am
Replies: 1
by lcleeton » Thu May 02, 2024 10:43 am

First post

I have a complete, old, round tube, '14 brass radiator. It was working on my '14 Touring when I bought the car a few years ago. It has the usual corrosion in and on the necks and, of course, some small leaks. Is there any interest in it? I have the shipping box my new $$$$ radiator came in. I could also bring it to Luray.
SOLD: I found a local...

Last post

What kind of price?

1 Replies

520 Views

Last post by Karl Von Neumann
Thu May 02, 2024 11:00 am
WTB - SPOKE JACK

Last post by RajoRacer « Thu May 02, 2024 10:21 am
Replies: 2
by bobt » Wed May 01, 2024 9:55 am

First post

I would like to buy a spoke jack. bobt

Last post

Perhaps state what size wheel you're working on - there were several sizes.

2 Replies

885 Views

Last post by RajoRacer
Thu May 02, 2024 10:21 am
NOS Touring Rear Fender mounts FS NEW PRICE

Last post by Dan Hatch « Thu May 02, 2024 10:20 am
Replies: 6
by Dan Hatch » Sun Jan 28, 2024 3:33 pm

First post

Here is a pair of NOS rear fender irons for a Touring.
$50+ shipping. Email me at address in pictures.
IMG_3389.jpeg
IMG_3390.jpeg
IMG_0260.jpeg

Last post

Back to top with new price

6 Replies

1007 Views

Last post by Dan Hatch
Thu May 02, 2024 10:20 am
Lot#3

Last post by South Park Zephyr « Thu May 02, 2024 8:28 am
Replies: 2
by Larry LaPatka » Wed May 01, 2024 8:12 am

First post

Running board carrier, original black radiator car spare tire carrier that attaches to windshield bolts with straps, speedometer gear, speedometer cable links.
All for $50.00 plus postage
Email for photo: ltlapatka@gmail.com

Last post

If the sale does not go thru to Bob, I will purchase this lot.

Scott

2 Replies

762 Views

Last post by South Park Zephyr
Thu May 02, 2024 8:28 am
FS OPEN CAR SIDE LIGHT BRACKET SET (SOLD)

Last post by Mark Chaffin « Thu May 02, 2024 1:10 am
Replies: 2
by Mark Chaffin » Wed May 01, 2024 7:02 pm

First post

Very nice set of original open car sidelight brackets $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_151607.jpg

Last post

Sold to Charlie.

2 Replies

524 Views

Last post by Mark Chaffin
Thu May 02, 2024 1:10 am
FS TON TRUCK REAR HUB PULLER (SOLD)

Last post by Mark Chaffin « Thu May 02, 2024 1:09 am
Replies: 2
by Mark Chaffin » Wed May 01, 2024 7:39 pm

First post

TON TRUCK rear hub puller. Ford script with partial 5Z numbers. Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_143021 (3).jpg

20240501_143031.jpg

Last post

Sold to Greg.

2 Replies

378 Views

Last post by Mark Chaffin
Thu May 02, 2024 1:09 am
FS CRANK HANDLES

Last post by Mark Chaffin « Thu May 02, 2024 1:06 am
Replies: 2
by Mark Chaffin » Wed May 01, 2024 7:27 pm

First post

Crank handles as described below. Price is $35.00 each plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_153303.jpg

#1 Model T crank handle (22-27). Crimped on handle turns freely as it should.
#2 Model T crank handle (22-27). Crimped on handle turns freely as it should. SOLD
#3 Model T crank handle (22-27). Crimped on...

Last post

#2 & #4 sold to Kevin.

2 Replies

454 Views

Last post by Mark Chaffin
Thu May 02, 2024 1:06 am
Motometer Radiator Cap Lot SOLD

Last post by jperryblue « Wed May 01, 2024 8:15 pm
Replies: 3
by colonelpowers » Tue Apr 30, 2024 7:33 pm

First post

For Sale one unused motometer and wing radiator cap, one very nice used dog bone, one nice stock style radiator cap, and one set of cast brass wings. The wings were originally plated and later were painted but now are a calico mix of brass, nickel, and silver paint. $150 for the lot plus shipping.

Sorry for the glared pictures. The lights and...

Last post

I will take the lot. How do you want to get paid?

3 Replies

912 Views

Last post by jperryblue
Wed May 01, 2024 8:15 pm
FS KR Wilson Pan Alignment Jig Price Drop to $1250.00

Last post by Tparts « Wed May 01, 2024 7:45 pm
Replies: 1
by Tparts » Fri Apr 26, 2024 6:34 pm

First post

KR Wilson Crank Case Alignment Jig. A “must have” tool needed when rebuilding T motors. Comes with drawings to make the missing tooling. There is a crack in the table as seen in the photos. $1250.00 delivered to Luray Swap Meet. Lang’s 1-800-TPARTS-1 ( 1-800-872-7871 )

Last post

Price Drop to $1250.00 with delivery to Luray Swap Meet

1 Replies

1035 Views

Last post by Tparts
Wed May 01, 2024 7:45 pm
FS WOOD WHEEL REAR HUB PULLER

Last post by Mark Chaffin « Wed May 01, 2024 7:43 pm

by Mark Chaffin » Wed May 01, 2024 7:43 pm

Large wood wheel rear hub puller. Same size threads as the Ton Truck. Unknown use or manufacturer. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_142823 (1).jpg

0 Replies

346 Views

Last post by Mark Chaffin
Wed May 01, 2024 7:43 pm
FS Dixie Rear Axle Stand Price Drop to 1K

Last post by Tparts « Wed May 01, 2024 7:36 pm
Replies: 2
by Tparts » Fri Apr 26, 2024 10:37 am

First post

Dixie Rear Axle Repair Stand This repair tool allows you to hold a complete rear axle including the driveshaft and it will fold up to reduce its footprint when not in use. One clamp can rotate 90 degrees to allow for ring and pinion adjustment. Far superior design to KR Wilson’s version. Tool has been repaired as shown in photos. $1000.00 with...

Last post

Price drop to $1000.00 delivered to Luray Swap Meet

2 Replies

1049 Views

Last post by Tparts
Wed May 01, 2024 7:36 pm
FS SPINDLE SET (SOLD)

Last post by Mark Chaffin « Wed May 01, 2024 7:32 pm
Replies: 1
by Mark Chaffin » Wed May 01, 2024 7:01 pm

First post

Very nice front spindle set (26/27 style / lowered) $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_151931.jpg

Last post

Sold to Josh. Thank you Josh.

1 Replies

274 Views

Last post by Mark Chaffin
Wed May 01, 2024 7:32 pm
FS MODEL T WOOD WHEEL HUB PULLER (SOLD)

Last post by Mark Chaffin « Wed May 01, 2024 7:17 pm
Replies: 1
by Mark Chaffin » Wed May 01, 2024 7:04 pm

First post

Very nice MOSCO Model T wood wheel hub puller $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_143137.jpg

20240501_143150.jpg

Last post

Sold to Larry. Thank you Larry.

1 Replies

238 Views

Last post by Mark Chaffin
Wed May 01, 2024 7:17 pm
FS OVAL GAS TANK BRACKETS (SOLD)

Last post by Mark Chaffin « Wed May 01, 2024 7:12 pm
Replies: 1
by Mark Chaffin » Wed May 01, 2024 6:57 pm

First post

Two nice sets of oval gas tank brackets with mounting hardware $35.00 each plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20240501_123958.jpg
Set #1

20240501_124050.jpg
Set #2

Last post

Both sets sold to Rick. Thanks Rick.

1 Replies

220 Views

Last post by Mark Chaffin
Wed May 01, 2024 7:12 pm
FS.Nice Original Rim Wind Dash Clock

Last post by Larry « Wed May 01, 2024 6:47 pm
Replies: 2
by Larry » Wed May 01, 2024 11:58 am

First post

Nice original rim wind Dash clock made by the “Keyless Auto Clock Co”. It is a rim, wind and rim set clock. Could probably used cleaned and oiled, but it is running. I wound it Friday morning around 7 o’clock and it was still running Sunday afternoon. Nice original face and hands.
Price $150 + shipping

IMG_7376.jpeg

Last post

Sold.
Thank You,
Larry

2 Replies

564 Views

Last post by Larry
Wed May 01, 2024 6:47 pm
motor mount new price

Last post by michaelb2296 « Wed May 01, 2024 6:36 pm
Replies: 5
by Melba Nolan » Fri Dec 22, 2023 10:41 pm

First post

20230927_141524.jpg 20230927_141458.jpg 20230927_141439.jpg

For sale: Motor mount in very good condition $75 postage included

Last post

I’ll take it melba!
Thanks,
Michael

5 Replies

1409 Views

Last post by michaelb2296
Wed May 01, 2024 6:36 pm
FS Samson Lion Ahooga Horn (SOLD)

Last post by ThreePedalTapDancer « Wed May 01, 2024 6:31 pm

by ThreePedalTapDancer » Wed May 01, 2024 6:31 pm

Original Samson Lion mechanical hand horn. Excellent condition, nice paint. No damage. Works great, very loud. Push down plunger to operate. Ready to mount and use. 225 includes shipping.

IMG_0781.jpeg IMG_2438.jpeg

0 Replies

463 Views

Last post by ThreePedalTapDancer
Wed May 01, 2024 6:31 pm
Items for sale

Last post by MAG « Wed May 01, 2024 4:37 pm
Replies: 2
by Larry LaPatka » Wed May 01, 2024 7:47 am

First post

Lot #1
Brakes springs, headlight tim, new wiper motor w/ shut off switch, fuel bowl w/shut off valve, kerosene fonts, full set 26/27 wire lug nuts & endless fan belt new. All for$75.00 plus postage

Last post

Sent an email this morning for purchase at 7:34 CDT and am awaiting a reply.

2 Replies

988 Views

Last post by MAG
Wed May 01, 2024 4:37 pm
FS. NOS Pair of Patterson Head Light Lenses

Last post by Larry « Wed May 01, 2024 4:29 pm
Replies: 2
by Larry » Wed May 01, 2024 3:35 pm

First post

FS. NOS Original pair of Patterson headlight lenses still in their original box. “Pat. Nov. 25 1919. Great unused condition.
Price $60 + Shipping.

IMG_7393.jpeg

IMG_7392.jpeg

Last post

On the outside they are tiered horizontally and on the inside They are scalloped vertically. They are the size of a standard T lens. 8 1/4 inches.

2 Replies

548 Views

Last post by Larry
Wed May 01, 2024 4:29 pm
Item for Sale #9

Last post by lockettt's « Wed May 01, 2024 4:10 pm
Replies: 2
by VasaTrail » Wed Apr 24, 2024 5:29 pm

First post

Buyer pays shipping and packaging

Steering Gear Quadrant - $20
IMG_2713.JPG
Stewart Warner Heater - Brand New in Box - $100
IMG_2788.JPG
Plastic Coils - $20
IMG_2723.JPG
Wood Coils #1 - $30
IMG_2726.JPG
Wood Coils #2 - $10
IMG_2724.JPG

Last post

Are the coils priced per coil or each lot? Thank You

2 Replies

863 Views

Last post by lockettt's
Wed May 01, 2024 4:10 pm
WTB a Hitch for my Centerdoor

Last post by colonelpowers « Wed May 01, 2024 4:01 pm

by colonelpowers » Wed May 01, 2024 4:01 pm

Just thought I would see if anyone has an old hitch lying around that I can use on my 22 centerdoor. I have a period trailer that I can't seem to sell so I guess that I will just fix it and pull it around myself. Thanks and God Bless.

0 Replies

407 Views

Last post by colonelpowers
Wed May 01, 2024 4:01 pm
Spark Plug Parts and Plugs

Last post by Scott_Conger « Wed May 01, 2024 3:38 pm
Replies: 1
by mt15 » Wed May 01, 2024 3:26 pm

First post

Collection contains the following
6-NOS straight sided Pat. Pend cores in original boxes $40ea
2- NOS doubled ribbed cores $20ea
5-good, No Cracks in the cores, spark Plugs $25
6-decent spark plug bases $5ea
20- inter copper gaskets $10 All
50+ top thumb screws 4 different varieties $15 all
Everything $400, A $60 savings Some misc. parts thrown...

Last post

email sent

1 Replies

825 Views

Last post by Scott_Conger
Wed May 01, 2024 3:38 pm
WTB: Fan Hub

Last post by Karl Von Neumann « Wed May 01, 2024 9:18 am
Replies: 1
by Apis Mellifera » Wed May 01, 2024 8:27 am

First post

I am looking for a fan hub for a '24 - aluminum, fan held on with four screws. Many thanks!

Last post

I've got them ill grab some pics later will need bushings

1 Replies

398 Views

Last post by Karl Von Neumann
Wed May 01, 2024 9:18 am
Lot#4

Last post by Larry LaPatka « Wed May 01, 2024 8:16 am

by Larry LaPatka » Wed May 01, 2024 8:16 am

Foredom Detail Engraver with variable foot speed control, extra motor brushes, long cable, hardly used at all
Complete $80.00 plus postage
Email for photos to ltlapatka@gmail.com

0 Replies

533 Views

Last post by Larry LaPatka
Wed May 01, 2024 8:16 am
Lot #2

Last post by Larry LaPatka « Wed May 01, 2024 8:07 am

by Larry LaPatka » Wed May 01, 2024 8:07 am

Black with logo spare tire cover, whip holder cast original, solid brass steering column support new original, carbide generator running board mount no drill style, original front top tie down hooks. All for $80.00 plus postage. Email for photos
ltlapatka@ gmail.com

0 Replies

512 Views

Last post by Larry LaPatka
Wed May 01, 2024 8:07 am
Photo Lot#1

Last post by Larry LaPatka « Wed May 01, 2024 7:58 am

by Larry LaPatka » Wed May 01, 2024 7:58 am

Photo doesn’t want to load. Always problems with photos.
Email : ltlapatka@gmail.com for photo.

0 Replies

496 Views

Last post by Larry LaPatka
Wed May 01, 2024 7:58 am
Heavy duty vintage hub puller SOLD

Last post by colonelpowers « Tue Apr 30, 2024 8:51 pm
Replies: 2
by colonelpowers » Tue Apr 30, 2024 7:37 pm

First post

This is a good heavy hub puller. I don't need it any more so I thought I would pass it on to someone who does. $100 plus shipping.

Last post

Probably Sold

2 Replies

664 Views

Last post by colonelpowers
Tue Apr 30, 2024 8:51 pm
Reliance Tachometer Hall-Scott SOLD

Last post by Layden Butler « Tue Apr 30, 2024 7:55 pm

by Layden Butler » Tue Apr 30, 2024 7:55 pm

Reliance brand 2400 R.P.M. tachometer, 3 1/4 porcelain face, 5 outside diameter, Hall-Scott was a famous engine manufacturer in Berkeley California. Needle moves when input is spun.

0 Replies

503 Views

Last post by Layden Butler
Tue Apr 30, 2024 7:55 pm
*SOLD* Pair of Lunkenheimer Ideal No 1 Brass Grease Cups.

Last post by Rich Eagle « Tue Apr 30, 2024 4:04 pm
Replies: 3
by Rich Eagle » Sun Apr 21, 2024 2:50 pm

First post

Pair of Lunkenheimer Ideal No 1 Brass Grease Cups 1/4 NPT. $100 + shipping
Cupz2.jpg
Cupz3.jpg
Cupz1.jpg
joyful.jpg
Rich Eagle
Grease cups have been sold!

Last post

Cups have been Sold.

3 Replies

2043 Views

Last post by Rich Eagle
Tue Apr 30, 2024 4:04 pm
FS: Dealer Z Tools 5Z204, 3Z602, and 3Z627 (SOLD)

Last post by South Park Zephyr « Tue Apr 30, 2024 2:23 pm
Replies: 1
by WaltM » Tue Apr 30, 2024 1:22 pm

First post

(SOLD) three Z dealer tools. 5Z204, pack nut wrench, 3Z602 and valve tool. Thanks, Walt

Last post

Payment is in todays mail

Thanks
Scott

1 Replies

560 Views

Last post by South Park Zephyr
Tue Apr 30, 2024 2:23 pm
FS: K R Wilson Model A Rear Spring Compressor

Last post by WaltM « Tue Apr 30, 2024 1:11 pm

by WaltM » Tue Apr 30, 2024 1:11 pm

For sale K. R. Wilson Model A rear spring compressor. All threads are in good shape. The X on the end of the large threaded bolt was modified (see photo). Shouldn't affect tool. Price $200. plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

494 Views

Last post by WaltM
Tue Apr 30, 2024 1:11 pm
FS TT hub caps

Last post by Karl Von Neumann « Tue Apr 30, 2024 12:38 pm
Replies: 3
by Karl Von Neumann » Sat Mar 30, 2024 12:33 pm

First post

5 mis matched tt hubcaps 12 each plus the ride threads look decent and usable no visible cracks

Last post

Move to top

3 Replies

597 Views

Last post by Karl Von Neumann
Tue Apr 30, 2024 12:38 pm
WTB pair of roadster L brackets

Last post by JTT3 « Tue Apr 30, 2024 12:33 pm
Replies: 3
by RGould1910 » Mon Apr 29, 2024 10:24 am

First post

Looking for a decent set of roadster L top brackets to hold the top saddles. These differ from the touring brackets in that the horizontal leg is longer, about 5 in length. Please email me thru the website.
Richard

Last post

Do you have a picture for reference

3 Replies

658 Views

Last post by JTT3
Tue Apr 30, 2024 12:33 pm
FS OVERSIZE CRANK MAIN BEARING CAP SET (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 10:18 am
Replies: 2
by Mark Chaffin » Mon Apr 29, 2024 10:39 pm

First post

Main bearing cap set. Heavy duty bronze. Ready for babbit. $60 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20240429_162309.jpg

20240429_162332.jpg

Last post

Sold to Jeff. Thank you

2 Replies

516 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 10:18 am
1913 cylinder block.

Last post by JTT3 « Tue Apr 30, 2024 8:55 am
Replies: 3
by Erik Barrett » Mon Apr 29, 2024 3:21 am

First post

Bringing a 1913 block to the Bakersfield swap meet for sale. Working on doing all the machine work at present. Will know asking price when it is ready shortly.

Last post

It should have the two ribs with those dates

3 Replies

1144 Views

Last post by JTT3
Tue Apr 30, 2024 8:55 am
FS FULTON CUTOUT (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:54 am
Replies: 2
by Mark Chaffin » Mon Apr 29, 2024 11:03 pm

First post

Large FULTON cutout for use with Aermor or Fulton Exhaust Whistle. Price is $30.00 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_150313.jpg

20240429_150324.jpg

Last post

Sold to Bob. Thank you

2 Replies

607 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:54 am
FS SPARK PLUG ADAPTOR SET (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:53 am
Replies: 2
by Mark Chaffin » Mon Apr 29, 2024 10:47 pm

First post

Steel Spark plug adaptor set for Model A heads. For use with 14mm plugs. Price is $10.00 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_160906.jpg

Last post

Sold to Rich. Thank you

2 Replies

456 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:53 am
FS SPOKE JACKS (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:52 am
Replies: 2
by Mark Chaffin » Mon Apr 29, 2024 10:55 pm

First post

Three spoke Jack's. Get all three for $25.00 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_154805.jpg

Last post

Sold to Rich. Thank you.

2 Replies

519 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:52 am
FS TRANS BAND CHANGING TOOL (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:48 am
Replies: 2
by Mark Chaffin » Mon Apr 29, 2024 10:49 pm

First post

Nice original transmission band changing tool. $20 with free domestic shipping. Mark Chaffin (951)805 0928
20240429_160455.jpg

Last post

Sold to Ron. Thank you Ron.

2 Replies

530 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:48 am
FS DOG LEG INTAKE MANIFOLD ADAPTOR (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:47 am
Replies: 1
by Mark Chaffin » Mon Apr 29, 2024 10:58 pm

First post

Interesting intake manifold adaptor. Get both pieces for $30.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805 0928

20240429_152817.jpg

20240429_152827.jpg

Last post

Sold to Kevin. Thank you.

1 Replies

357 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:47 am
FS DIFFERENTIAL (SOLD)

Last post by Mark Chaffin « Tue Apr 30, 2024 8:46 am
Replies: 1
by Mark Chaffin » Mon Apr 29, 2024 11:14 pm

First post

Excellent differential assembly. You can buy ten rear Axles and tear them down and MAYBE find one good differential. Save yourself the time and trouble. Get this one for $150 plus $16.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_140231.jpg

20240429_140035.jpg

20240429_140014.jpg

Last post

Sold to Kevin. Thank you

1 Replies

391 Views

Last post by Mark Chaffin
Tue Apr 30, 2024 8:46 am
FS SU CARBURETOR

Last post by Mark Chaffin « Mon Apr 29, 2024 11:10 pm

by Mark Chaffin » Mon Apr 29, 2024 11:10 pm

Long Beach Hill Climb memories. I recall a few SU's being used during these events. Lot of three. Price is $200 plus $16.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_142731.jpg

20240429_142656.jpg

0 Replies

430 Views

Last post by Mark Chaffin
Mon Apr 29, 2024 11:10 pm
FS NEAT ACCESSORY TAIL LIGHT (SOLD)

Last post by Mark Chaffin « Mon Apr 29, 2024 11:07 pm

by Mark Chaffin » Mon Apr 29, 2024 11:07 pm

Neat cast aluminum accessory tail light / license plate light. Early round stake mount. Price is $30.00 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928

20240429_144943.jpg

20240429_144934.jpg

20240429_144951.jpg

20240429_144959.jpg

SOLD TO BILL.

0 Replies

451 Views

Last post by Mark Chaffin
Mon Apr 29, 2024 11:07 pm
FS CUTOUT

Last post by Mark Chaffin « Mon Apr 29, 2024 11:00 pm

by Mark Chaffin » Mon Apr 29, 2024 11:00 pm

Exhaust cutout $20.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20240429_150353.jpg

20240429_150342.jpg

0 Replies

371 Views

Last post by Mark Chaffin
Mon Apr 29, 2024 11:00 pm
FS EXHAUST BLEED OFF ADAPTOR (SOLD)

Last post by Mark Chaffin « Mon Apr 29, 2024 10:53 pm

by Mark Chaffin » Mon Apr 29, 2024 10:53 pm

Exhaust pipe hot air bleed off adaptor. Good for delivering hot air to the carburetor or intake manifold. $20.00 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928 SOLD
20240429_155653.jpg

20240429_155704.jpg

0 Replies

426 Views

Last post by Mark Chaffin
Mon Apr 29, 2024 10:53 pm
FS STEERING COLUMN LOCK

Last post by Mark Chaffin « Mon Apr 29, 2024 10:42 pm

by Mark Chaffin » Mon Apr 29, 2024 10:42 pm

Steering column lock accessory. No key. Price is $25.00 plus $8.50. Mark Chaffin (951) 805 0928

20240429_161106.jpg

0 Replies

387 Views

Last post by Mark Chaffin
Mon Apr 29, 2024 10:42 pm
Still looking

Last post by michaelb2296 « Mon Apr 29, 2024 9:59 pm
Replies: 7
by Dollisdad » Sat Apr 27, 2024 4:34 pm

First post

for front and rear taper leaf springs.

Last post

Im going to Luray. I have a rear 1917 tapered leaf spring.

7 Replies

1198 Views

Last post by michaelb2296
Mon Apr 29, 2024 9:59 pm
WTB Speedometer Cable & Housing

Last post by SurveyKing « Mon Apr 29, 2024 6:20 pm
Replies: 1
by SurveyKing » Thu Apr 11, 2024 8:19 pm

First post

Hello, I am in need of a decent speedometer cable and housing for my 1924 Touring with a Stewart 160 mounted on the right side of the dash. The length of the cable should be 63 . Call me or email me if you have something. Thank You very much.

Daniel Snell
Danielsnell2@twc.com
210-279786 4

Last post

Still looking for a Stewart Cable and Housing, 63 inches in length.

1 Replies

620 Views

Last post by SurveyKing
Mon Apr 29, 2024 6:20 pm
WTB set of original brass covers

Last post by BigAl « Mon Apr 29, 2024 6:17 pm
Replies: 1
by Belliott3 » Mon Apr 29, 2024 3:30 pm

First post

Does anyone have a decent set of original brass valve stem covers? I know the vendors sell reproductions, but I prefer the patina of original brass.

Last post

Sent you an email. AL

1 Replies

541 Views

Last post by BigAl
Mon Apr 29, 2024 6:17 pm
FS Vee Radiator

Last post by frontyboy « Mon Apr 29, 2024 6:05 pm
Replies: 1
by flatbroke3 » Fri Apr 26, 2024 12:08 pm

First post

I need to find a new home for this radiator. speedster special.
2250.00 plus the ride from Seattle
Howard 206-nine 1 nine 19 forty nine or email brasscarguy@comcast.net

Last post

This radiator is tour proven having been in a couple of Great American races on speedster #7. I purchased t for a speedster project and never got around to it.
brasscarguy

1 Replies

883 Views

Last post by frontyboy
Mon Apr 29, 2024 6:05 pm
TR-16/Dill 74/ Schrader 888 valve stems SOLD

Last post by Tbird « Mon Apr 29, 2024 4:21 pm

by Tbird » Mon Apr 29, 2024 4:21 pm

Here is a set of valve stems comparable to the Schrader 777 size
3 are marked TR 16 Dill 74
1 is marked Schrader 888
4 bridge nuts
3 bridge washers

$100 plus shipping
mikebird@lifeattheridge.net

IMG_1819.jpeg

0 Replies

429 Views

Last post by Tbird
Mon Apr 29, 2024 4:21 pm
11-12 brass door handle castings FS

Last post by Tbird « Mon Apr 29, 2024 4:15 pm

by Tbird » Mon Apr 29, 2024 4:15 pm

Here is a nice set of cast 11-12 door handles and escutcheons. The castings need finishing.
$100 plus shipping

mikebird@lifeattheridge.net

IMG_1818.jpeg

0 Replies

426 Views

Last post by Tbird
Mon Apr 29, 2024 4:15 pm
Schrader 724 stems and hardware SOLD

Last post by CDooREDW « Mon Apr 29, 2024 4:14 pm
Replies: 2
by Tbird » Wed Feb 07, 2024 6:44 pm

First post

I have 4 Schrader 724 stems, bridgewashers, nuts and round rim nuts. The rim nuts are knurled and say Schrader universal valve NY USA. The nuts will accept the regular caps but you have to thread them all the way as opposed to the 777 rim nuts. Nice set. $100 plus shipping

mikebird@lifeattheridge.net

IMG_1518.jpeg

IMG_1521.jpeg...

Last post

Mike,
Sending you an email.
Tnx,
Ron

2 Replies

797 Views

Last post by CDooREDW
Mon Apr 29, 2024 4:14 pm
Brass Stewart Cable Housing Ends SOLD

Last post by Tbird « Mon Apr 29, 2024 3:58 pm

by Tbird » Mon Apr 29, 2024 3:58 pm

Here’s a set of reproduction Stewart Speedo cable housing ends. These are the ones made by Vintique. $20 for the pair plus shipping.
mikebird@lifeattheridge.net

IMG_1815.jpeg

IMG_1814.jpeg

0 Replies

356 Views

Last post by Tbird
Mon Apr 29, 2024 3:58 pm
WTB 19-20 ignition switch

Last post by Karl Von Neumann « Mon Apr 29, 2024 3:30 pm
Replies: 6
by Model T Mark » Mon Mar 25, 2024 8:39 pm

First post

I’m looking for a really good or perhaps a new old stock ignition switch with the heavy cast light switch handle. We are struggling with broken pot metal parts. This is the last part needed to complete the restoration of a high point show car. It’s a Canadian export to Australia. Any help would be greatly appreciated. Thanks in advance. Mark...

Last post

I stumbled across another light switch mark if you still need one

6 Replies

1091 Views

Last post by Karl Von Neumann
Mon Apr 29, 2024 3:30 pm
WTB Window Channel-Found, Thanks

Last post by RajoRacer « Mon Apr 29, 2024 1:53 pm
Replies: 1
by rickd » Mon Apr 29, 2024 1:31 pm

First post

WTB aluminum/steel colored window channels for a late 25 Touring windshield. The vendors carry only the brass channel. Looking for channels in very good condition. I have dimensions if needed. Thanks. Ch3.jpg Chan2.jpg Channel.jpg

Last post

I believe perhaps those were originally nickeled .

1 Replies

414 Views

Last post by RajoRacer
Mon Apr 29, 2024 1:53 pm
Gas headlamp accessory flint ignitors F/S

Last post by Layden Butler « Mon Apr 29, 2024 1:51 pm

by Layden Butler » Mon Apr 29, 2024 1:51 pm

Nice working pair of accessory flint sparking ignitors for gas headlamps. Just twist the handle to make sparks like an acetylene torch ignitor. One is shown mounted to a headlamp burner, burner is not included. $125, domestic postage $10.

0 Replies

381 Views

Last post by Layden Butler
Mon Apr 29, 2024 1:51 pm
Wanted: '26 Horn Button

Last post by RadRacer203 « Mon Apr 29, 2024 1:24 pm
Replies: 6
by RadRacer203 » Sat Apr 27, 2024 11:05 am

First post

Looking for a new horn button for my '26 coupe, I didn't realize how bad the original was until now. My bracket is in good shape, and Lang's stocks the bakelite button itself but I can't buy just the contacts. Here's a picture of what I need:

20240427_110349.jpg

Last post

Got one, thanks!

6 Replies

1126 Views

Last post by RadRacer203
Mon Apr 29, 2024 1:24 pm
FS: Rough Brass Castings for Early T's

Last post by Dan Hatch « Mon Apr 29, 2024 1:23 pm
Replies: 11
by Rodger Erickson » Sun Apr 28, 2024 12:52 am

First post

For Sale: A bunch of rough unmachined yellow brass castings for early Model T's: Fuel-air mix escutcheons, $3 each; Radiator mounts, $4 each; 1911 style top brackets, $5 each; 1909 style top brackets $5 each, Hood handles, $8 / pair; coil box mounting bracket (one only) $5, part of a tail light bracket, $2. Shipping not included. Thanks for...

Last post

I think I see it now. Looked at a Brassworks high radiator on the shelf and it has the three rivets in top tank that match. The round nose sticks through the tank back plate so the mount is inside tank.Guess that way Ford did it, cause these came out a Ford dealer in the 50s.
Thanks again guys.
And move ad back to top.

11 Replies

1643 Views

Last post by Dan Hatch
Mon Apr 29, 2024 1:23 pm
Angle mount dash clock F/S

Last post by Layden Butler « Mon Apr 29, 2024 1:20 pm

by Layden Butler » Mon Apr 29, 2024 1:20 pm

This clock is made to mount on a vertical wooden firewall. 2 1/4 face, rim wind and rim set, runs and sets. Needs to be cleaned and lubricated, no mounting bracket but can supply pictures of one. $125, domestic postage $10.

0 Replies

441 Views

Last post by Layden Butler
Mon Apr 29, 2024 1:20 pm
FS 1915 Chissis SOLD

Last post by 25tfire « Mon Apr 29, 2024 1:07 pm

by 25tfire » Mon Apr 29, 2024 1:07 pm

FS 1915 Frame, front and rear axles with taper leaf springs etc, front axle has an over the axle wishbone, front spring clip for spring and motor. Also have 4 wheels, 17 block with crank and cam. other misc parts go with it. Jim nine 7 zero 373 88six four. Pick up only No. Colorado SOLD Yhank You Frank and MTFCA

0 Replies

519 Views

Last post by 25tfire
Mon Apr 29, 2024 1:07 pm
1910 Block with crank and cam 22xxx

Last post by Larry Debaugh « Mon Apr 29, 2024 11:17 am
Replies: 1
by Larry Debaugh » Sun Apr 28, 2024 11:26 am

First post

Block with crank and cam, mains still have shims. Were 2 one inch cracks in the corner of the water jacket that were professionally repaired sn 22xxx…. $7000 , can deliver to Luray swap meet, other early parts available.Email for additional pictures or information…Larry Debaugh

Last post

Block is sold pending payment… thanks

1 Replies

772 Views

Last post by Larry Debaugh
Mon Apr 29, 2024 11:17 am
FOUND: ONE REAR SPRING SHACKLE 27

Last post by Brent Mize « Mon Apr 29, 2024 7:59 am
Replies: 2
by Brent Mize » Sun Apr 28, 2024 2:25 pm

First post

I’m in need of one spring shackle that’s not egg shaped. I already have one of those!😂
I only need one and I don’t need the plate.
Here’s the parts I need.
Thanks in advance for your help. Just email and I’ll get info for shipment and paying.
There are several on eBay but none of them look that good.
Thanks
Brent

Last post

I have found a shackle! Thanks so much to The Mtfca classifieds!👏🏻👏🏻👏🏻👏🏻

2 Replies

688 Views

Last post by Brent Mize
Mon Apr 29, 2024 7:59 am
Fronty header flanges

Last post by Dan McEachern « Sun Apr 28, 2024 10:00 pm
Replies: 4
by Kevin Pharis » Sat Apr 27, 2024 10:38 pm

First post

Only needed 1… wound up making 10!

Set of 3 flanges made from 1/2” thick mild steel and will fit T/S model Fronty heads... maybe others. 2-3/4” bolt centers and 1-5/8” thru. These are laser cut then chamfered in the CNC. 3 sets available - $65 + shipping

9A99D236-7680-4126-A3D5-D89B8093EF91.jpeg

Last post

Close counts for some stuff... Had the same problem with some carb flanges recently, luckily the boo boo fit other carbs I had. funny how 1/16th makes a difference

4 Replies

999 Views

Last post by Dan McEachern
Sun Apr 28, 2024 10:00 pm
FS THREE DIP PAN OIL SUMP (SOLD)

Last post by Mark Chaffin « Sun Apr 28, 2024 8:28 pm
Replies: 1
by Mark Chaffin » Sun Apr 28, 2024 9:40 am

First post

Nice aluminum GIANT MFG oil sump $250 with free domestic shipping. Mark Chaffin (951)805 0928

Screenshot_20240428_061316_Chrome.jpg

Last post

Sold to Mr. Willis. Thank you

1 Replies

437 Views

Last post by Mark Chaffin
Sun Apr 28, 2024 8:28 pm
FS: Model A Water Pump Rebuild Kit

Last post by Richard K « Sun Apr 28, 2024 8:15 pm
Replies: 1
by tselliott » Sun Apr 28, 2024 7:13 pm

First post

Description says it all. Part # A-8591
$30 plus shipping
Scott Elliott
971-5O6-94O2

Last post

Email sent for purchase of above item. Thanks Rich

1 Replies

525 Views

Last post by Richard K
Sun Apr 28, 2024 8:15 pm
Wanted APCO Radius Rod Ball Cap

Last post by kevinf « Sun Apr 28, 2024 4:46 pm
Replies: 9
by kgibbo » Thu Apr 25, 2024 1:10 pm

First post

Please let me know if you have one for sale.
Thanks, Kevin

Last post

I would buy parts from hi.............oops, I guess I already have, and for many years as a matter of fact.
You wont' be disappointed.

9 Replies

1472 Views

Last post by kevinf
Sun Apr 28, 2024 4:46 pm
Items for Sale #12

Last post by Southfork Creek « Sun Apr 28, 2024 3:17 pm
Replies: 3
by VasaTrail » Thu Apr 25, 2024 12:01 pm

First post

Buyer pays shipping and packaging.

26/27 Turtle Deck Trunk Support - $20
IMG_2678.JPG
Steering Gear Covers - $45
IMG_2693.JPG
Ignition Covers x2 - $25
IMG_2686.JPG
IMG_2701.JPG
Top Bow Wooden Curves - $30
IMG_2672.JPG

Last post

Hi Dale, I'd take that steering gear cover that's on the bottom of the photo if it's a brass one. It kind of looks like the top one is nicked and the bottom one is brass. Thanks. Rollie

3 Replies

1045 Views

Last post by Southfork Creek
Sun Apr 28, 2024 3:17 pm
Free: BookA Audel's Practical Engineering c. 1913 GONE

Last post by Herb Iffrig « Sun Apr 28, 2024 2:08 pm
Replies: 1
by Rodger Erickson » Sun Apr 28, 2024 1:27 pm

First post

Free: A water-damaged copy of Practical Engineering by Audel's, presented in the form of questions and answers - lots of nice illustrations. The focus is mainly on stationary steam engines and boilers, etc. There is pretty severe water damage to the bottom edge and the cover is in sad shape. Maybe salvage the illustrations? Pay for shipping and...

Last post

I would like the book.

Herb

1 Replies

520 Views

Last post by Herb Iffrig
Sun Apr 28, 2024 2:08 pm
Strongberg OF CARB W/CABLE CHOCK NEW

Last post by Southfork Creek « Sun Apr 28, 2024 1:05 pm
Replies: 2
by Tbz4u » Thu Apr 25, 2024 3:10 pm

First post

This carb came off a running car cable I bought new it's repo $ 850 robertaweitzel@gmail.com I can send u pictures

Last post

I could use the choke cable if you'd want to break up the set.

2 Replies

1021 Views

Last post by Southfork Creek
Sun Apr 28, 2024 1:05 pm
Free: Tubular Rivets for Brakes? GONE

Last post by Rodger Erickson « Sun Apr 28, 2024 11:01 am
Replies: 3
by Rodger Erickson » Sun Apr 28, 2024 8:55 am

First post

Free: A mixed up pile of tubular and semi-tubular rivets - some brass some steel a few aluminum ones also. Probably 10 - 20 lbs here, and I don't have time to sort them all out. I don't know if these are used on Model T's but I think they were used on brake shoes for cars from the 1930's. They are yours if you pay shipping (A medium Flat Rate box...

Last post

Message Sent

3 Replies

513 Views

Last post by Rodger Erickson
Sun Apr 28, 2024 11:01 am
WTB Simmons Super / Western Auto choke shaft

Last post by Mark Gregush « Sun Apr 28, 2024 10:00 am
Replies: 1
by JRSpada4 » Sun Apr 28, 2024 7:50 am

First post

I’m looking for a choke shaft for a Simmons Super Power / Western Auto Wizard carburetor or an unrebuildable core to scavenge parts from.

Last post

NH is going to be the same shaft, lever and butterfly.

1 Replies

560 Views

Last post by Mark Gregush
Sun Apr 28, 2024 10:00 am
FS HEADER PLATE (SOLD)

Last post by Mark Chaffin « Sun Apr 28, 2024 9:33 am

by Mark Chaffin » Sun Apr 28, 2024 9:33 am

Header plate 3/8 thick $40 plus $15.00 domestic shipping. Mark Chaffin (951)805 0928

Screenshot_20240428_062047_Chrome.jpg

0 Replies

368 Views

Last post by Mark Chaffin
Sun Apr 28, 2024 9:33 am
FS AXLE SHAFT GEAR SET

Last post by Mark Chaffin « Sun Apr 28, 2024 9:31 am

by Mark Chaffin » Sun Apr 28, 2024 9:31 am

One pair if good axle shaft gears $40 plus $8.50 domestic shipping. Mark Chaffin (951)805 0928

Screenshot_20240428_062109_Chrome.jpg

0 Replies

356 Views

Last post by Mark Chaffin
Sun Apr 28, 2024 9:31 am
WTB or Borrow Spindle Bushing Reamer

Last post by JRSpada4 « Sun Apr 28, 2024 7:55 am

by JRSpada4 » Sun Apr 28, 2024 7:55 am

I’m looking for a spindle bushing reamer and accompanying facing tool to replace my king pin bushings. I’d prefer the one from Snyder’s that’s guided. If you’re willing to loan one, I’ll gladly pay for shipping, both ways.

0 Replies

423 Views

Last post by JRSpada4
Sun Apr 28, 2024 7:55 am
WTB tools for ford roadster

Last post by MdDWS « Sat Apr 27, 2024 10:20 pm
Replies: 2
by MdDWS » Tue Apr 23, 2024 1:09 pm

First post

WTB complete tools for my very early 1909 ford roadster. Would appreciate any and all help. Contact at 419-937-6284

-Don Shanabrook

Last post

What tools do you have for sale?Don

2 Replies

824 Views

Last post by MdDWS
Sat Apr 27, 2024 10:20 pm
1909/10 Reproduction Stewart 22 Speedometer gear

Last post by Aussie16 « Sat Apr 27, 2024 8:44 pm

by Aussie16 » Sat Apr 27, 2024 8:44 pm

For sale. 1909/10 #22 Stewart pressed steel speedometer road gear.
Pressed steel and finished in flat black and stamped with the correct number 22 stamp.
See pictures. Correct as per MTFCA Speedometer book page 6
$40 plus postage. Several available.

0 Replies

518 Views

Last post by Aussie16
Sat Apr 27, 2024 8:44 pm
1912 Brass Jno Brown tail light

Last post by Aussie16 « Sat Apr 27, 2024 8:20 pm

by Aussie16 » Sat Apr 27, 2024 8:20 pm

For Sale 1912 JNO Brown 1912 all brass tail lamp.
It is in good original condition for age with some dents and marks but still very presentable to mount on your car.
All coloured lenses are excellent. See photos.
$340 plus shipping.

0 Replies

463 Views

Last post by Aussie16
Sat Apr 27, 2024 8:20 pm
WTB 21-inch Rims

Last post by Stu Tomlinson « Sat Apr 27, 2024 5:04 pm
Replies: 1
by Stu Tomlinson » Fri Apr 26, 2024 2:35 pm

First post

WTB a good set of 21-inch rims for a 1927 T. If anyone heading to Luray has any decent rims, I will make arrangements to have them picked up at your site.
Thanks,
Stu

Last post

Back to top. Found a set of 5. No longer needed - and thank you for those that helped out on this search.
Stu

1 Replies

432 Views

Last post by Stu Tomlinson
Sat Apr 27, 2024 5:04 pm
Items for Sale #13

Last post by RajoRacer « Sat Apr 27, 2024 2:16 pm
Replies: 3
by VasaTrail » Thu Apr 25, 2024 12:07 pm

First post

Buyer pays shipping and packaging

Thurst Washer - $50
IMG_2761.JPG
REar End Gear - $20
IMG_2760.JPG
Fan Pulleys - $25
IMG_2698.JPG
Steering Wheel Locks, both have keys, both work- $60
IMG_2690.JPG
IMG_2689.JPG

Last post

Your first photo is of clutch discs.

3 Replies

915 Views

Last post by RajoRacer
Sat Apr 27, 2024 2:16 pm
FS: Pot Porry of T and TT Parts

Last post by George House « Sat Apr 27, 2024 1:49 pm
Replies: 4
by George House » Fri Apr 19, 2024 9:42 am

First post

From left to right: Oval gas tank brackets $35 + $18 shipping, single original front bow-to-stanchion bracket + original wing nut $25, TT emergency brake adjustment arm $20 ea., orig. fender eye bolts + nuts $10 each, pancake Hassler base $10, ignition/ammeter bracket used when chassis sold - someone artfully fashioned a plate where 26-27 oval...

Last post

Received 2 requests for front-on picture of real nice $15 Model A intake…should fit in USPS Medium flat rate

4 Replies

1115 Views

Last post by George House
Sat Apr 27, 2024 1:49 pm
Item for Sale #18

Last post by Craig Leach « Sat Apr 27, 2024 10:44 am
Replies: 1
by VasaTrail » Fri Apr 26, 2024 1:29 pm

First post

Buyer pays shipping and packaging.

Ruckstell Axle Housing - Passenger Side - $70
IMG_2985.JPG
Belly Sling - Hooks for each side are included. - $30
IMG_2972.JPG
Various Tools - $20
IMG_2961.JPG
Battery Brackets - $30
IMG_2970.JPG
Luggage Rack - $30
IMG_2948.JPG

Last post

email sent on belly sling

1 Replies

616 Views

Last post by Craig Leach
Sat Apr 27, 2024 10:44 am
Sold KR Wilson Engine Stand

Last post by RGould1910 « Sat Apr 27, 2024 8:27 am
Replies: 2
by Tparts » Fri Apr 26, 2024 10:12 am

First post

Sold pending payment!
Very Nice K R Wilson Engine Stand with tool tray, and Model T/A mounting bracket. $1150.00 including delivery to Luray Swap Meet. Lang's 1-800-TPARTS 1 ( 1-800-872-7871 )

Last post

Email sent

2 Replies

1077 Views

Last post by RGould1910
Sat Apr 27, 2024 8:27 am
F.S. Brass Era Horn Parts

Last post by Original14T « Sat Apr 27, 2024 3:21 am
Replies: 5
by Larry » Fri Apr 26, 2024 10:11 am

First post

For sale a nice variety of early brass model T Horn parts.
There are nine horn reeds. One stamped”Rubes”, and one stamped
“Peacock”. Various fittings. Three 1915/16 Brass elbows. Two nice original Horn mounting brackets. One original horn bulb with its original threaded adapter and one reproduction horn bulb.
Also, some replacement screen material...

Last post

You Aussies deserve to get some good parts down there. You fellows do amazing work with very little material .

Thanks Edmund, it is tough finding good original parts downunder. The horn bracket, bulb and conduit were about the last things missing from my original condition 14 touring car. Thanks Larry!
Regards, Bill

5 Replies

1070 Views

Last post by Original14T
Sat Apr 27, 2024 3:21 am
Items for Sale #7

Last post by 1913Runabout « Fri Apr 26, 2024 4:34 pm
Replies: 3
by VasaTrail » Wed Apr 24, 2024 5:14 pm

First post

Buyer pays shipping and packaging

Spare Tire Mount $30
IMG_2756.JPG
Exhaust Cut out #1 - $30
IMG_2755.JPG
Exhaust Cut out #2 - $30
IMG_2754.JPG
Clutch Springs - $100
IMG_2753.JPG
Ford Oil Can - No top - $10
IMG_2758.JPG

Last post

I will take exhaust cutout #2.

3 Replies

1081 Views

Last post by 1913Runabout
Fri Apr 26, 2024 4:34 pm
Items for Sale #21

Last post by Rajo23 « Fri Apr 26, 2024 3:26 pm
Replies: 1
by VasaTrail » Fri Apr 26, 2024 1:42 pm

First post

Buyer pay shipping and packaging.

Running Board - $80
IMG_2982.JPG
Top Irons - $250
IMG_2984.JPG
IMG_2982.JPG
IMG_2983.JPG
Dash - $100
IMG_2977.JPG

Last post

I will take the top irons.
How would you like to be paid?

1 Replies

697 Views

Last post by Rajo23
Fri Apr 26, 2024 3:26 pm
FS E and J brass headlight parts

Last post by KimDobbins « Fri Apr 26, 2024 3:18 pm
Replies: 1
by KimDobbins » Fri Apr 26, 2024 12:32 pm

First post

New spinnings for E and J 666 brass headlights. Doors, $40 each, bezels $35 each, back, $20. All plus shipping. kdmks AT att.net.

Last post

Back, Bezels and 2 doors are sold. 6 doors are still for sale.

1 Replies

546 Views

Last post by KimDobbins
Fri Apr 26, 2024 3:18 pm
Items for Sale #19

Last post by JTT3 « Fri Apr 26, 2024 3:08 pm
Replies: 3
by VasaTrail » Fri Apr 26, 2024 1:33 pm

First post

Buyer pays shipping and packaging.
Boyco Can #1 - cap comes off and a spot then comes out of can. - $55
IMG_2949.JPG
Boyco Can #2 - $55
IMG_2950.JPG
Boyco Can #3 - $55
IMG_2951.JPG
Boyco Can #4 - $50
IMG_2952.JPG

Last post

Shows it’s sent?

3 Replies

717 Views

Last post by JTT3
Fri Apr 26, 2024 3:08 pm
Items for Sale #20

Last post by schwabd1 « Fri Apr 26, 2024 2:41 pm
Replies: 2
by VasaTrail » Fri Apr 26, 2024 1:38 pm

First post

Buyer pays shipping and packaging.

Engine Splash pan - $40
IMG_2969.JPG
Ruckstell Axle - Drivers Side - $50
IMG_2971.JPG
Radiator, needs new neck will come with a neck - $125
IMG_2971.JPG
Head - $80
IMG_2976.JPG
Radiator Apron - $25
IMG_2973.JPG

Last post

Sent you an email

2 Replies

778 Views

Last post by schwabd1
Fri Apr 26, 2024 2:41 pm
Items for Sale #22

Last post by VasaTrail « Fri Apr 26, 2024 1:46 pm

by VasaTrail » Fri Apr 26, 2024 1:46 pm

Buyer pays shipping and packaging

Pair of splash aprons - $125
IMG_2978.JPG
Front Bumper Mounts - $70
IMG_2979.JPG
Rear Bumper mounts - for full bars. - $70
IMG_2980.JPG
Frame Cross Members - $100
IMG_2981.JPG

0 Replies

582 Views

Last post by VasaTrail
Fri Apr 26, 2024 1:46 pm
Items for Sale - The Story

Last post by VasaTrail « Fri Apr 26, 2024 1:06 pm
Replies: 3
by VasaTrail » Thu Apr 25, 2024 12:43 pm

First post

Hey all,

Just thought I would add a little flavor on all the Items for sale that I have posted in the past two days.

My father rebuilt a 1927 Model T 2 door roadster back in the 1960's. Sad to say his rebuilt T sat unused and undriven in the garage for 3 decades. he got bored with it but could not bring himself to let it go. He passed a couple...

Last post

I did but they have been sold.

3 Replies

963 Views

Last post by VasaTrail
Fri Apr 26, 2024 1:06 pm
FS Wood steering wheel

Last post by fordrelic « Fri Apr 26, 2024 1:02 pm
Replies: 1
by fordrelic » Sun Apr 21, 2024 12:52 pm

First post

For sale wood steering wheel that will need restored.
OD is near 15 with cast spider.

$100 or best or better offer. plus shipping.

Last post

to the top

1 Replies

468 Views

Last post by fordrelic
Fri Apr 26, 2024 1:02 pm

New Topic

9200 topics

Page 39 of 92
- Jump to page:
Previous
1
…
37
38
39
40
41
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum