Classifieds - Parts - Page 41

Classifieds - Parts

New Topic

9200 topics

Page 41 of 92
- Jump to page:
Previous
1
…
39
40
41
42
43
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79256 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS VALVE STEM COVER AND NUTS (SOLD)

Last post by Mark Chaffin « Fri Apr 19, 2024 5:38 pm

by Mark Chaffin » Fri Apr 19, 2024 5:38 pm

An assortment of various valve stem covers and nuts. Price for the complete lot is $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Valve Cover Lot.jpg

0 Replies

384 Views

Last post by Mark Chaffin
Fri Apr 19, 2024 5:38 pm
FS AXLE SEAL SETS (SOLD)

Last post by Mark Chaffin « Fri Apr 19, 2024 5:26 pm
Replies: 1
by Mark Chaffin » Fri Apr 19, 2024 4:51 pm

First post

Anyone remember these? Four sets NROS. $50 for the lot plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240419_134251.jpg

20240419_134610.jpg

Last post

Sold to Ed Ned. :)

1 Replies

324 Views

Last post by Mark Chaffin
Fri Apr 19, 2024 5:26 pm
1915 transmision

Last post by Charlie1915 « Fri Apr 19, 2024 5:03 pm
Replies: 9
by Charlie1915 » Wed Apr 17, 2024 4:37 pm

First post

WTB 1915 Aluminum transmission cover. With or without pedals

Last post

FOUND ONE THANKS

9 Replies

1189 Views

Last post by Charlie1915
Fri Apr 19, 2024 5:03 pm
SOLD: 1909-1911 "Dog Leg" Aluminum Intake Manifold

Last post by GGZ « Fri Apr 19, 2024 4:08 pm

by GGZ » Fri Apr 19, 2024 4:08 pm

SOLD to Dave! Thanks, MTFCA and Dave!

This aluminum 1909-1911 Dog Leg intake manifold appears to be an older reproduction. It does not appear to have been used.

Price is 160.00 including shipping in USA.

Email: motoringicons@hotmail.com or 734-730-4274

0 Replies

559 Views

Last post by GGZ
Fri Apr 19, 2024 4:08 pm
Spoke Jacks

Last post by Model T Matt « Fri Apr 19, 2024 3:59 pm
Replies: 3
by Model T Matt » Mon Apr 15, 2024 2:44 pm

First post

For Sale 3 spoke Jacks $90.00 shipped to your door call Matt 503-824-268one

Last post

Held for Joe Spencer

3 Replies

1002 Views

Last post by Model T Matt
Fri Apr 19, 2024 3:59 pm
FS 1916 CALIFORNIA LICENSE PLATE SET (SOLD)

Last post by Mark Chaffin « Fri Apr 19, 2024 3:50 pm
Replies: 2
by Mark Chaffin » Fri Apr 19, 2024 2:07 pm

First post

Very nice set of matching 1916 California license plates. Very hard to find a pair these days. Price is $700 with free domestic shipping. Mark Chaffin (951) 805-0928

20240419_104601.jpg

20240419_110341.jpg

Last post

Sold to Rick. Thanks Rick! :)

2 Replies

365 Views

Last post by Mark Chaffin
Fri Apr 19, 2024 3:50 pm
Little Hershey Swap Meet

Last post by TRDxB2 « Fri Apr 19, 2024 3:47 pm
Replies: 2
by FATMAN » Thu Apr 18, 2024 11:48 am

First post

Little Hershey Swap Meet
Saturday May 18th 2024
call Dave for information
815-979-4544

Last post

I'm going - I always stop by Bob's and wind up buying what I forgot I needed or not.

2 Replies

756 Views

Last post by TRDxB2
Fri Apr 19, 2024 3:47 pm
FS RARE RILEY MULTI-LIFT OIL SUMP (SOLD)

Last post by DustySpokes « Fri Apr 19, 2024 12:50 pm
Replies: 3
by Mark Chaffin » Thu Apr 18, 2024 4:28 pm

First post

This is a very rare Geo Riley Multi-Lift oil sump for a 3 dip pan in excellent condition. I've seen the Riley multi-lift actuators and the Multi Ford cylinder head. This is the first time I have ever seen a Riley Multi-Lift sump. If you have the cylinder head and multi-lifts, you need this sump. Price is $800 plus domestic shipping. Mark Chaffin...

Last post

A good catch Mike ! It took me only about 20-25 years to get one for my own setup. This is the only one I have ever seen for sale , other than my own.
-Dusty

3 Replies

852 Views

Last post by DustySpokes
Fri Apr 19, 2024 12:50 pm
High Volume Aluminum Intake Manifold - SOLD

Last post by RVA23T « Fri Apr 19, 2024 12:36 pm
Replies: 3
by Oldav8tor » Tue Apr 09, 2024 6:58 pm

First post

Brand new - never installed. Shipped anywhere in the US for $150.
manifold.jpeg

Last post

Sale pending to RVA23T

Forgot to let you know the package arrived Monday with out any issues because my Frau didn't see it!
Thanks!
Richard C

3 Replies

1119 Views

Last post by RVA23T
Fri Apr 19, 2024 12:36 pm
Oval gas tank brackets fs. Sold

Last post by CTLeonard « Fri Apr 19, 2024 12:13 pm

by CTLeonard » Fri Apr 19, 2024 12:13 pm

Good usable pair . 30.00 plus shipping. ctleonard64@gmail.com IMG_20240419_110900485.jpg IMG_20240419_110849481.jpg IMG_20240419_110910142.jpg

0 Replies

371 Views

Last post by CTLeonard
Fri Apr 19, 2024 12:13 pm
Part nr. 3009 B needed

Last post by JSteele « Fri Apr 19, 2024 11:36 am
Replies: 7
by Magnusw » Wed Apr 10, 2024 4:13 am

First post

I need cylinder front cover, 3009 B, for non-generator motor.
. Thanks

Last post

Magnus it's been sent. You should have both an email and PM.
John

7 Replies

1371 Views

Last post by JSteele
Fri Apr 19, 2024 11:36 am
Engine Block Needed

Last post by mcnallyf « Fri Apr 19, 2024 9:27 am
Replies: 9
by mcnallyf » Thu Apr 18, 2024 3:03 pm

First post

I have a 1924 roadster that has a coolant leak around the number 1 exhaust valve. I would like to replace the block with one that does not leak. I live in Maine, so it is not feasible for me to go to any of the swap meets. Any information on where to get one would be appreciated.

Last post

I know where there's several blocks in Gray, would you be interested? please note the owner is here in Florida right now

Thank you so much for this offer, but after looking into it a little deeper, I believe it is the head, so I bought a new one. See my previous post I explain it a lot more. If this doesn't work I may get back to you.

9 Replies

1488 Views

Last post by mcnallyf
Fri Apr 19, 2024 9:27 am
Looking for right rear fender for 1912/3 Metz any leads would be appreciated

Last post by JTT3 « Fri Apr 19, 2024 8:40 am
Replies: 5
by JTT3 » Mon Apr 08, 2024 10:22 pm

First post

Trying to help someone that needs the right rear fender for a 1912/13 model 22. Any leads would be great thanks John

Last post

Good call Herbster

5 Replies

1151 Views

Last post by JTT3
Fri Apr 19, 2024 8:40 am
Minnesota Swapmeet April 20.

Last post by Roger Byrne « Fri Apr 19, 2024 8:25 am
Replies: 8
by BobP » Thu Mar 21, 2024 12:50 pm

First post

We are having our 7th annual prewar Model T-Model A Ford era Swap meet, car show at our farm on Saturday April 20, 2024 at 7am. All makes are welcome. Free overnight primitive camping. Free setup and admission. Location is at Bob and Helen Peterson's, 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Any questions, CALL Bob, 507...

Last post

Bob and Helen host a great get-to-gether!! It's the place to be if you are interested in Model T's and Model A's. Always lots of parts to check over, friends to connect with and a great food wagon . . . . what more could you ask?

8 Replies

1646 Views

Last post by Roger Byrne
Fri Apr 19, 2024 8:25 am
FS 1926 Pickup Bed and Tailgate

Last post by Humblej « Fri Apr 19, 2024 6:46 am

by Humblej » Fri Apr 19, 2024 6:46 am

For Sale: Early 1926 Ford roadster Pickup bed with tailgate. It is an early 1926 bed because the front stake pockets are all the way forward. Nice restorable condition, not much pitting, a few extra holes where the wood decking goes 2 holes drilled in the tailgate probably for a license plate. The front panel is bent up but all there and...

0 Replies

488 Views

Last post by Humblej
Fri Apr 19, 2024 6:46 am
FS MODIFIED (LAUREL) FRONT SPRING PERCH SET (SOLD)

Last post by Mark Chaffin « Fri Apr 19, 2024 12:14 am
Replies: 1
by Mark Chaffin » Thu Apr 18, 2024 7:32 pm

First post

Nice pair of shortened spring perches for use with Laurel underslung front axle brackets. Price for the pair is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Short Perch Set.jpg

Last post

Sold to Phillip. Thank you.

1 Replies

463 Views

Last post by Mark Chaffin
Fri Apr 19, 2024 12:14 am
FS CRANKSHAFT GEAR (SOLD)

Last post by Mark Chaffin « Thu Apr 18, 2024 8:47 pm
Replies: 2
by Mark Chaffin » Thu Apr 18, 2024 7:34 pm

First post

One model T crankshaft gear new. Retails for $24.00. This one is $20.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Crank Gear.jpg

Last post

Sold to Rich. Thank you.

2 Replies

486 Views

Last post by Mark Chaffin
Thu Apr 18, 2024 8:47 pm
FS BENDIX PARTS (SOLD)

Last post by Mark Chaffin « Thu Apr 18, 2024 8:47 pm
Replies: 2
by Mark Chaffin » Thu Apr 18, 2024 7:40 pm

First post

As described below. Mark Chaffin (951) 805-0928

Bendix Collars.jpg
Six new starter Bendix drive sleeves. Retail is $10.50 each. Get all six for $40.00 plus $8.50 domestic shipping.

Bendix Heads.jpg
Eight NOS Bendix drive heads. Reproduction retail is $8.50 each. Get all eight for $40.00 plus $8.50 domestic shipping.

Purchase both together...

Last post

Sold to Rich. Thank you.

2 Replies

467 Views

Last post by Mark Chaffin
Thu Apr 18, 2024 8:47 pm
FS Stewart Speedometer gear

Last post by fordrelic « Thu Apr 18, 2024 7:29 pm
Replies: 8
by fordrelic » Sat Feb 17, 2024 9:32 am

First post

For Sale a Stewart speedometer gear. No 24, 9p, 64 T.

Clean it up and ready to go.

$70 includes shipping to lower 48.

speedo gear.jpg

Last post

to the top

8 Replies

1681 Views

Last post by fordrelic
Thu Apr 18, 2024 7:29 pm
FS ALUMINUM HIGH COMPRESSION HEADS (SOLD)

Last post by Mark Chaffin « Thu Apr 18, 2024 7:13 pm
Replies: 1
by Mark Chaffin » Thu Apr 18, 2024 5:29 pm

First post

These two heads are identical an came out of the estate of a model T speed guy. They are of the high head variety with Ford script and 14mm plug threads. The combustion chamber is interesting as it looks as if it was designed for use with modern flat top pistons (292 pistons). Both heads are in like new condition. Price is $450 each plus domestic...

Last post

Both sold to Steve. Thank you Steve.

1 Replies

528 Views

Last post by Mark Chaffin
Thu Apr 18, 2024 7:13 pm
Apco Steering supports

Last post by Model T Matt « Thu Apr 18, 2024 5:19 pm
Replies: 1
by Model T Matt » Mon Apr 15, 2024 3:00 pm

First post

For Sale old and new unfinished cast supports asking $75.00 for all shipped to your door step call Matt 503-824-268one

Last post

$50.00 shipped

1 Replies

673 Views

Last post by Model T Matt
Thu Apr 18, 2024 5:19 pm
King Pin Kit

Last post by Model T Matt « Thu Apr 18, 2024 4:38 pm
Replies: 6
by Model T Matt » Tue Apr 16, 2024 11:33 pm

First post

New King pin set with reamer asking $220.00 shipped to your door step call Matt 503-824-268one

Last post

Sold Thanks George

6 Replies

1135 Views

Last post by Model T Matt
Thu Apr 18, 2024 4:38 pm
13-14 windshield frame and parts fs

Last post by CTLeonard « Thu Apr 18, 2024 4:25 pm
Replies: 2
by CTLeonard » Fri Nov 17, 2023 9:21 am

First post

Purchased new years ago, things have changed. Complete frame with glass clamps filler blocks. Frame has brass glass channel installed. Windshield divider for 14 only, and brass glass channel for divider. No hinges. Price paid for these was 760.00. will sell for 640.00 plus shipping. Measurements are top 41 1/8 x 12 3/4. Bottom 41 1/8 x 14 3/4...

Last post

Xxxxxxxxxx

2 Replies

902 Views

Last post by CTLeonard
Thu Apr 18, 2024 4:25 pm
Top sockets touring 18-20

Last post by Tbz4u « Thu Apr 18, 2024 2:56 pm
Replies: 1
by Tbz4u » Thu Apr 18, 2024 1:32 pm

First post

Used top sockets $300 plus ship send email 4 pictures robertaweitzel@gmail.com

Last post

Sold pending payment

1 Replies

458 Views

Last post by Tbz4u
Thu Apr 18, 2024 2:56 pm
For Sale: Ignition Panels and ammeters (Sold)

Last post by Philip Lawrence « Thu Apr 18, 2024 2:44 pm
Replies: 2
by Philip Lawrence » Wed Apr 17, 2024 10:07 pm

First post

Here's a collection of ammeter and ignition panels. The ignition panels all use the pin type switch contacts. The ammeters all need restoring. Sold as one lot, $30.00 plus shipping. Please email me through the forum.

Last post

Sold pending payment

2 Replies

646 Views

Last post by Philip Lawrence
Thu Apr 18, 2024 2:44 pm
1912 timing cover fs. Sold

Last post by CTLeonard « Thu Apr 18, 2024 2:18 pm
Replies: 1
by CTLeonard » Thu Mar 21, 2024 4:22 pm

First post

Nice one. 100.00 plus shipping. ctleonard64@gmail.com IMG_20240321_151812487.jpg IMG_20240321_151804199.jpg

Last post

Xxxxxxxxxx

1 Replies

703 Views

Last post by CTLeonard
Thu Apr 18, 2024 2:18 pm
WTB 1912 Rear End

Last post by Bill Everett « Thu Apr 18, 2024 12:20 pm
Replies: 3
by Bill Everett » Thu Apr 04, 2024 4:26 pm

First post

I'd like to buy a 1912 rear end assembly, including a 2-piece drive shaft and radius rods.

Please send a couple of pictures as well as $$ wanted to me at:

My cell is 901-496-8795.

My e-mail is bill.everett@epickett.com

If you have only axle housings, send pictures of them as well.

Thanks.

Bill Everett

Last post

Bump to the top.

3 Replies

1002 Views

Last post by Bill Everett
Thu Apr 18, 2024 12:20 pm
Carb control fs. Sold

Last post by CTLeonard « Thu Apr 18, 2024 11:46 am
Replies: 2
by CTLeonard » Tue Apr 16, 2024 9:53 am

First post

If not mistaken, I believe this to be for a 13. Something I've read about a drawn center flange. 50.00 plus shipping. ctleonard64@gmail.com IMG_20240416_084924768.jpg IMG_20240416_084858205.jpg IMG_20240416_084851222.jpg

Last post

Text message sent to your phone

2 Replies

690 Views

Last post by CTLeonard
Thu Apr 18, 2024 11:46 am
Small brass horn fs

Last post by CTLeonard « Thu Apr 18, 2024 10:16 am

by CTLeonard » Thu Apr 18, 2024 10:16 am

Measures 81/2 . No name on it. 15.00 plus shipping. ctleonard64@gmail.com IMG_20240418_091131050.jpg IMG_20240418_091124981.jpg IMG_20240418_091115685.jpg

0 Replies

421 Views

Last post by CTLeonard
Thu Apr 18, 2024 10:16 am
FS: Wood Steering Wheel SOLD

Last post by SurveyKing « Thu Apr 18, 2024 8:57 am
Replies: 2
by tselliott » Thu Apr 11, 2024 5:16 pm

First post

Nice solid wood steering wheel with 2 keyway spider.
There are some blemishes near the joint, which is nice and tight. Overall a really nice solid wheel
$150 plus shipping
Scott Elliott
971-5O6-94O2

Last post

What is the outside diameter?

2 Replies

878 Views

Last post by SurveyKing
Thu Apr 18, 2024 8:57 am
For Sale: U & J Timer box

Last post by Philip Lawrence « Wed Apr 17, 2024 10:43 pm

by Philip Lawrence » Wed Apr 17, 2024 10:43 pm

Here is a interesting item for the timer collectors, an U&J timer box. Actually it's just the box top. This is the cover or lid that slides down over box it's self. Sorry this is all I have, no timer or the inside of the box. This shows shop and handling wear but what a great display piece for your timer collection. Buy it for $30.00 plus...

0 Replies

514 Views

Last post by Philip Lawrence
Wed Apr 17, 2024 10:43 pm
For Sale: Timers and Rollers

Last post by Philip Lawrence « Wed Apr 17, 2024 10:21 pm

by Philip Lawrence » Wed Apr 17, 2024 10:21 pm

Timers and Roller collection. One of the timers is a flapper type the rest all use the standard roller. All of the timers need restoring to one degree or another. All the rollers show wear, $50.00 for everything plus shipping. Emails only please

0 Replies

477 Views

Last post by Philip Lawrence
Wed Apr 17, 2024 10:21 pm
Wanted model T round gas tank strap

Last post by RajoRacer « Wed Apr 17, 2024 9:55 pm
Replies: 9
by spedur » Sat Apr 13, 2024 6:41 pm

First post

looking for one.

Last post

I sent you a message Karl - I want that bracket.

9 Replies

876 Views

Last post by RajoRacer
Wed Apr 17, 2024 9:55 pm
Gas headlamp burner tips SOLD

Last post by CDooREDW « Wed Apr 17, 2024 9:11 pm
Replies: 2
by Layden Butler » Fri Mar 22, 2024 5:24 pm

First post

Pair of good used burner tips for gas headlamps, Crescent brand 1/2 cubic feet size ( proper size for Model T Ford).

Last post

Layden,
Sent you an email.
Thank you,
Ron in Huntsville

2 Replies

815 Views

Last post by CDooREDW
Wed Apr 17, 2024 9:11 pm
F S 1916 hood new rootleib

Last post by Tbz4u « Wed Apr 17, 2024 8:37 pm
Replies: 1
by Tbz4u » Wed Apr 17, 2024 8:34 pm

First post

Aluminum with louvers for the brass err car email for pictures $175. Plus shipping robertaweitzel@gmail.com

Last post

Hood is sold

1 Replies

496 Views

Last post by Tbz4u
Wed Apr 17, 2024 8:37 pm
Sale Pending! Muncie Transmission, shortened driveshaft and Raduis Rods $350 plus shipping

Last post by Richard K « Wed Apr 17, 2024 8:04 pm
Replies: 1
by Tparts » Wed Apr 17, 2024 7:54 pm

First post

Sale Pending! Muncie Transmission, shortened driveshaft, and radius rods. Condition is unknown, but we can have the shifter removed for inspection and photos. $350 plus shipping. Lang’s 1-800-872-7871 located in North Central Massachusetts

Last post

Email sent for Purchase of above item. Thanks Rich

1 Replies

560 Views

Last post by Richard K
Wed Apr 17, 2024 8:04 pm
FS Wood Wheel Hub Set

Last post by Richard K « Wed Apr 17, 2024 12:43 pm
Replies: 1
by jamlip » Wed Apr 17, 2024 2:08 am

First post

Front and rear. Removed from my 1921 Touring (bought new wheels with hubs installed).

$100 + P&P to your location

Last post

Email sent for Purchase of above items. Thanks Rich

1 Replies

593 Views

Last post by Richard K
Wed Apr 17, 2024 12:43 pm
Switch Ignition

Last post by RajoRacer « Wed Apr 17, 2024 11:22 am
Replies: 2
by Model T Matt » Tue Apr 16, 2024 9:14 pm

First post

Updated pictures per Steves request -For Ignition

Last post

Thanks for the rear photo Matt - Richard's faster than I am !!!

2 Replies

710 Views

Last post by RajoRacer
Wed Apr 17, 2024 11:22 am
Switch

Last post by Model T Matt « Tue Apr 16, 2024 10:18 pm
Replies: 2
by Model T Matt » Tue Apr 16, 2024 7:19 pm

First post

For sale Ignition Switch key is number 70 Amp. meter is a new unit switch plate has a extra hole/weld fill ? asking $75.00 shipped call Matt 503-82four-268one

Last post

sold to Richard

2 Replies

618 Views

Last post by Model T Matt
Tue Apr 16, 2024 10:18 pm
Sold running boards

Last post by bryan831daniel « Tue Apr 16, 2024 9:40 pm
Replies: 3
by fordrelic » Sat Apr 13, 2024 7:00 pm

First post

I believe these are TT running boards with what I have heard called boot scrapers.

$100 plus shipping

TT running boards.jpg

Last post

I’m interested. Message sent. ~Bryan

3 Replies

868 Views

Last post by bryan831daniel
Tue Apr 16, 2024 9:40 pm
26/27 Big Drum Ruckstell

Last post by namdc3 « Tue Apr 16, 2024 9:09 pm
Replies: 1
by namdc3 » Sat Apr 13, 2024 6:27 pm

First post

1926 1927 Ruckstell axel. I got it with other parts so I don’t know its history. It has the long shift lock and shifts like it should. I took the shift lock off and things look clean and oily inside. Comes with two wooden wheel hubs that were very tight on the axles. Keyways look good, but one side had the thread tip bent. I don’t think the axle...

Last post

Sold. Thank you.

1 Replies

879 Views

Last post by namdc3
Tue Apr 16, 2024 9:09 pm
New seat springs. For touring 16 to 22

Last post by Tbz4u « Tue Apr 16, 2024 8:30 pm
Replies: 2
by Tbz4u » Tue Apr 16, 2024 7:38 pm

First post

These are nos not even out of boxes front and rear and backs 4 of them.$ 250. Plus shipping Way under new market value email for pt # robertaweitzel@gmail.com

Last post

Sold pending payment

2 Replies

562 Views

Last post by Tbz4u
Tue Apr 16, 2024 8:30 pm
Seat springs for 16 to 22 touring

Last post by Tbz4u « Tue Apr 16, 2024 7:32 pm

by Tbz4u » Tue Apr 16, 2024 7:32 pm

These are new in the box $250 plus shipping . For all 4

0 Replies

395 Views

Last post by Tbz4u
Tue Apr 16, 2024 7:32 pm
For Sale..Hand crank ratchet

Last post by dinosbunny « Tue Apr 16, 2024 12:31 pm
Replies: 3
by dinosbunny » Mon Apr 15, 2024 10:49 pm

First post

For Sale, Nice Hand crank ratchet with claw and spring. Nice and straight $55.00 includes shipping in lower 48
crank1.jpg
c2.jpg
c3.jpg
c4.jpg

Last post

Sold pending payment, Rich check your email please. thank you

3 Replies

836 Views

Last post by dinosbunny
Tue Apr 16, 2024 12:31 pm
TT Door Handles

Last post by Model T Matt « Tue Apr 16, 2024 12:22 pm
Replies: 2
by Model T Matt » Mon Apr 15, 2024 3:07 pm

First post

For Sale Not finished castings of TT Handles asking $80.00 for the group call 503-824-268one

Last post

Shipping to Rich-Thanks

2 Replies

666 Views

Last post by Model T Matt
Tue Apr 16, 2024 12:22 pm
SOLD!!!!!!!!!!!!!!!!!!!!

Last post by GGZ « Tue Apr 16, 2024 10:51 am
Replies: 5
by GGZ » Tue Aug 01, 2023 12:23 pm

First post

xxxxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

5 Replies

1770 Views

Last post by GGZ
Tue Apr 16, 2024 10:51 am
Misc. T goodies

Last post by Model T Matt « Tue Apr 16, 2024 9:43 am
Replies: 3
by Model T Matt » Mon Apr 15, 2024 2:42 pm

First post

Buy the Bunch-$90.00 shipped to your door-New Wheel Puller-odds and ends call Matt 503-824-268one rad. cap-misc. timers-bent Apco steering brace

Last post

Whole batch headed to Richard Thanks

3 Replies

974 Views

Last post by Model T Matt
Tue Apr 16, 2024 9:43 am
For Sale: New TT Rocky Mountian Brakes (Sold)

Last post by Philip Lawrence « Mon Apr 15, 2024 10:37 pm
Replies: 2
by Philip Lawrence » Tue Apr 02, 2024 5:35 pm

First post

New TT Rocky Mountian brake set up as sold by Chaffins Garage. Just a little shop wear. Retail on this assembly was $1045.00 my price is $900.00 plus shipping, save $145.00. Please emails only, I Don't check messages. Thanks for looking.

Last post

The Rocky Mountian Brakes are sold pending payment.

2 Replies

1037 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 10:37 pm
New set of 21 x4.50 tubes and flaps

Last post by colonelpowers « Mon Apr 15, 2024 9:28 pm
Replies: 1
by colonelpowers » Mon Apr 15, 2024 3:07 pm

First post

I bought these new last year and I think that they were about $330 before tax and shipping. I will take $320 shipped.

Last post

The tubes and flaps are probably sold. There is a man who is supposed to come by on Saturday. If he doesn't show up I will let you all know.

1 Replies

583 Views

Last post by colonelpowers
Mon Apr 15, 2024 9:28 pm
Odds and Ends

Last post by Model T Matt « Mon Apr 15, 2024 9:05 pm
Replies: 3
by Model T Matt » Mon Apr 15, 2024 2:52 pm

First post

Assorted T treasures ? Misc.parts pile asking $75.00 shipped to your door call Matt 503-824-2681

Last post

Held for you Rich

3 Replies

1095 Views

Last post by Model T Matt
Mon Apr 15, 2024 9:05 pm
Model T Axles and other stuff

Last post by JTT3 « Mon Apr 15, 2024 7:49 pm
Replies: 1
by pkhammer » Mon Apr 15, 2024 7:01 pm

First post

I have two model T rear axle assemblies including the driveshafts and radius rods. One is complete with brakes, one missing brakes. I need to find a home for them. No shipping but I can deliver to Luray. 1917-1925 era. $100 each. I also have a complete 1918 engine, a 1914 block, crankshafts, camshafts, etc all at VERY reasonable prices. Let me...

Last post

Thanks so much on the 1914 best John

1 Replies

624 Views

Last post by JTT3
Mon Apr 15, 2024 7:49 pm
Valve Stem Dust Covers

Last post by Model T Matt « Mon Apr 15, 2024 6:55 pm
Replies: 2
by Model T Matt » Mon Apr 15, 2024 2:55 pm

First post

For Sale an assortment of Dust covers asking $100.00 shipped to your Garage call Matt 503-824-268one

Last post

Held for you Thanks

2 Replies

679 Views

Last post by Model T Matt
Mon Apr 15, 2024 6:55 pm
WANTED-26-27 Carburetor Control Rod for NH carb

Last post by Brent Mize « Mon Apr 15, 2024 3:55 pm
Replies: 2
by Brent Mize » Mon Apr 15, 2024 12:18 pm

First post

I’m in need of a good throttle control rod for a 26-27 with and NH carb.
None of the vendors currently have these. I have made one but would prefer one made to the Ford Print.
Please let me know if you can help.
Thanks
Brent

Last post

Bob Bergstadt had one.
I purchased one from him.
Thanks
Brent

2 Replies

720 Views

Last post by Brent Mize
Mon Apr 15, 2024 3:55 pm
FS 3 sets of 26-27 bands 2 sets with new linings

Last post by colonelpowers « Mon Apr 15, 2024 3:26 pm
Replies: 1
by colonelpowers » Mon Apr 15, 2024 3:01 pm

First post

I have 3 sets of bands for sale. The two sets with new linings are nice and ready to go. The 3rd set is still dirty with old worn out linings but is in good shape. $225 plus shipping for all 3. IMG_20240414_181431.jpg

Last post

I found a set of 26-27 brake shoes that I will throw in as well. They are unlined.

1 Replies

562 Views

Last post by colonelpowers
Mon Apr 15, 2024 3:26 pm
1915-16 Headlamps

Last post by Model T Matt « Mon Apr 15, 2024 3:02 pm
Replies: 2
by Model T Matt » Mon Apr 15, 2024 2:48 pm

First post

Nice set of 1915/16 Headlamps adjuster is at 12 Oclock position asking $145.00 shipped to your door call Matt 503-824-268one

Last post

Held for Kevin Thanks

2 Replies

736 Views

Last post by Model T Matt
Mon Apr 15, 2024 3:02 pm
FS Roadster seat back to Quarter panel corner supportss

Last post by Burlingtontguy « Mon Apr 15, 2024 2:54 pm
Replies: 1
by Burlingtontguy » Wed Apr 10, 2024 11:29 am

First post

I have a pair of seat back to quarter panel trim supports I believe for late 22-25 roadster bodies. also an original driver side fake door quarter panel. $110 for the supports and $325 for the quarter panel all plus shipping. e-mail or call me with questions, thanks , :twisted: Dennis 401-932-3191

Last post

TO THE TOP

1 Replies

622 Views

Last post by Burlingtontguy
Mon Apr 15, 2024 2:54 pm
Wanted: Headlight (Found)

Last post by Philip Lawrence « Mon Apr 15, 2024 12:45 am
Replies: 2
by Philip Lawrence » Sun Apr 14, 2024 12:15 am

First post

I'm looking for a one complete headlight assembly for a 1920 to 1925 model.

Last post

Karl, sent you an email

2 Replies

667 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 12:45 am
For Sale: New in box 1924-1925 hood

Last post by Philip Lawrence « Mon Apr 15, 2024 12:22 am
Replies: 1
by Philip Lawrence » Tue Apr 02, 2024 5:46 pm

First post

New Rootlieb 1924-1925 Hood. Has never been out of the sealed box from Rootlieb. Retail price is $425.00 my price is $350.00 plus shipping, save $75.00. No need to take a photo of a box. Emails only please. Thanks for looking

Last post

The hood is still available. You won't get a $75.00 discount from Rootlieb or any of the vendors.

1 Replies

833 Views

Last post by Philip Lawrence
Mon Apr 15, 2024 12:22 am
for sale - distributor

Last post by dinosbunny « Mon Apr 15, 2024 12:07 am
Replies: 1
by dinosbunny » Sun Apr 14, 2024 10:50 pm

First post

For Sale..Texas T/Birdhaven Distributor with extra points, coil, condensers, rotor, cap and plug/coil wires. Only used to start a car and decided to go with coils and timer. THIS IS A 12 VOLT SETUP. $320.00 shipped to your door in the lower 48.
dist1.jpg
dist2.jpg
dist3.jpg
dist4.jpg

Last post

sold pending payment, Mark, please check your email..thank you

1 Replies

533 Views

Last post by dinosbunny
Mon Apr 15, 2024 12:07 am
SOLD headlights 26/27

Last post by Joer357 « Sun Apr 14, 2024 7:38 pm
Replies: 2
by fordrelic » Sat Apr 13, 2024 7:04 pm

First post

For Sale one pair of 26/27 headlights.

$100 plus shipping.

26 headlights.jpg 26 headlights .jpg

Last post

Hi are the headlights still for sale

2 Replies

645 Views

Last post by Joer357
Sun Apr 14, 2024 7:38 pm
WTB Casting between head and Radiator to fit 1912

Last post by 49willard « Sun Apr 14, 2024 5:48 pm
Replies: 6
by 49willard » Fri Apr 12, 2024 9:21 pm

First post

Looking for an original water outlet elbow.

Last post

email sent

6 Replies

1097 Views

Last post by 49willard
Sun Apr 14, 2024 5:48 pm
Still looking for

Last post by Dollisdad « Sun Apr 14, 2024 5:21 pm
Replies: 5
by Dollisdad » Sat Apr 06, 2024 7:55 pm

First post

A no hump spool. IMG_8804.jpeg Thanks for your help.

Last post

Found. Thanks everyone.

5 Replies

1384 Views

Last post by Dollisdad
Sun Apr 14, 2024 5:21 pm
WTB - a winter radiator cover for a 1919 Touring

Last post by frontyboy « Sun Apr 14, 2024 2:36 pm
Replies: 17
by DavidGMeier » Sun Sep 18, 2022 12:25 am

First post

I would like to get a winter radiator cover for a 1919 Touring.

Last post

I have a NOS one hanging on the wall.. Will send you a photo and measurements Monday if you still need one. I have no idea what year this would fit.

brasscarguy.

17 Replies

3077 Views

Last post by frontyboy
Sun Apr 14, 2024 2:36 pm
Wanted: 26-27 Right Spindle (Found)

Last post by Karl Von Neumann « Sun Apr 14, 2024 12:45 pm
Replies: 2
by Philip Lawrence » Sun Apr 14, 2024 12:05 am

First post

I'm looking for a right (passenger) side 1926 - 27 spindle. Thanks in advance.

Last post

Also have I can just box them with the tire carrier

2 Replies

487 Views

Last post by Karl Von Neumann
Sun Apr 14, 2024 12:45 pm
For Sale: New E.Z. Adjustable Slider

Last post by Mark Chaffin « Sun Apr 14, 2024 12:25 pm
Replies: 5
by Philip Lawrence » Tue Apr 02, 2024 6:04 pm

First post

New E.Z. Adjustable Slider part number 2566EZ in Chaffin's catalog. Retail price is $85.00 mine is $65.00 plus shipping, save $20.00. Emails only please, thanks for looking.

Last post

Yes. For the Rocky Mountain Brake setup.

5 Replies

1437 Views

Last post by Mark Chaffin
Sun Apr 14, 2024 12:25 pm
quick bolt set ( original )

Last post by Gene_French « Sun Apr 14, 2024 8:49 am
Replies: 4
by Gene_French » Fri Mar 29, 2024 3:11 pm

First post

i have a set of original quick-bolts for sale ... these do not have any manufacturers marking on them , so the manufacturer is unknown ... i replaced missing sleeve nuts on 2 of the bolts and replaced several of the forked keepers also ... i will post photos when i re-size to fit this site ... price is $150.00 + $10.20 postage in lower 48 states ,...

Last post

Quick bolt set sold on ebay in less than 24 hours ... Gene French

4 Replies

1337 Views

Last post by Gene_French
Sun Apr 14, 2024 8:49 am
For Sale: Accessory oval rear window (Sold)

Last post by Philip Lawrence « Sat Apr 13, 2024 11:52 pm
Replies: 3
by Philip Lawrence » Tue Mar 19, 2024 2:24 pm

First post

This is a model T era accessory. An aluminum frame that measures 12 7/8 x 6 7/8 for the Runabout or Touring. Uses Isinglass for the window. Makes a simple screw on assembly. Polish it to a mirror shine and add bling to the rear of your car. The top photo shows the rearward facing side (it had been installed incorrectly). If you look closely in...

Last post

This has been sold

3 Replies

1008 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:52 pm
Wanted: Early parts and accessories catalogs.

Last post by Philip Lawrence « Sat Apr 13, 2024 11:51 pm
Replies: 1
by Philip Lawrence » Wed Mar 27, 2024 1:14 am

First post

I'm interested in buying original 1900 to 1915 parts and accessories catalogs by the many companies that catered to the early motorists. I especially would like a pre 1910 Dykes parts and accessories catalog. Please contact me by email through the forum. Thanks in advance.

Last post

Always interested in purchasing early parts and accessories catalogs.

1 Replies

689 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:51 pm
Wanted: Early 1920 parts

Last post by Philip Lawrence « Sat Apr 13, 2024 11:43 pm
Replies: 9
by Philip Lawrence » Wed Mar 06, 2024 12:45 am

First post

I'm looking for an early starter switch and frame mounted bracket that was riveted to the frame. These were separate parts. They are shown on page 279 (lower corner) of Bruce McCalley's book. I'm also looking for a magneto horn as shown on the same page.

Lastly I need a spare tire carrier for the rear of the car. I'm looking for one in very good...

Last post

I'm still looking for the starter switch and mounting bracket.

9 Replies

1943 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:43 pm
For Sale: Complete set of TT hub caps

Last post by Philip Lawrence « Sat Apr 13, 2024 11:30 pm
Replies: 5
by Philip Lawrence » Tue Apr 02, 2024 6:14 pm

First post

I have two new chrome plated TT rear hub caps and one new standard size chrome hub cap and an additional very nice original hub cap that is chrome plated for $50.00 plus shipping. Emails only please

Last post

These are still available.

5 Replies

890 Views

Last post by Philip Lawrence
Sat Apr 13, 2024 11:30 pm
Capacitors for Model T Ford Ignition Coils?

Last post by KWTownsend « Sat Apr 13, 2024 8:12 pm
Replies: 4
by Ron Patterson » Thu Mar 14, 2024 11:17 am

First post

For Sale, replacement capacitors for Model T Ford ignition Coil rebuilding. These are excess to my needs.
Type 418P Orange Drop, Round Profile, Polyester Film-Foil capacitors. Capacitance .47 uF, 400v, dV/dt rating of 700 volts/uS. I have installed over 25,000 of these capacitors over the years with no problems or component failures.
Perfect for...

Last post

Got mine yesterday!
Thanks, Ron!

: ^ )

Keith

4 Replies

1682 Views

Last post by KWTownsend
Sat Apr 13, 2024 8:12 pm
Sold switchs

Last post by vping « Sat Apr 13, 2024 7:48 pm
Replies: 1
by fordrelic » Sat Apr 13, 2024 7:07 pm

First post

For Sale two switch plates.

$40 plus shipping T switch .jpg T switch back.jpg

Last post

Email sent

1 Replies

625 Views

Last post by vping
Sat Apr 13, 2024 7:48 pm
Wanted to Buy Model T Ford Ignition Coils

Last post by Ron Patterson « Sat Apr 13, 2024 5:15 pm

by Ron Patterson » Sat Apr 13, 2024 5:15 pm

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal...

0 Replies

641 Views

Last post by Ron Patterson
Sat Apr 13, 2024 5:15 pm
1911-16 Tire Rod End Bolts New Old Stock F/S

Last post by Layden Butler « Sat Apr 13, 2024 4:06 pm

by Layden Butler » Sat Apr 13, 2024 4:06 pm

New Old Stock bolts for ends of the tie rod, authentic supplied by FORD 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $125 pair, domestic postage $10. These are NOT reproduction but are New Old Stock. Threaded on top for brass oilers. Oiler example not included.

0 Replies

497 Views

Last post by Layden Butler
Sat Apr 13, 2024 4:06 pm
Jones tachometer head SOLD

Last post by Layden Butler « Sat Apr 13, 2024 3:51 pm

by Layden Butler » Sat Apr 13, 2024 3:51 pm

Brass case with bevel glass, 3600 RPM, 3 diameter face.

0 Replies

492 Views

Last post by Layden Butler
Sat Apr 13, 2024 3:51 pm
FREE 2 Engine Blocks 1926 SPOKEN FOR!

Last post by Layden Butler « Sat Apr 13, 2024 3:36 pm

by Layden Butler » Sat Apr 13, 2024 3:36 pm

2 bare 1926-27 engine blocks, pick them up here in Northern California. This is a one time offer, they go out in next scrap metal collection.
SPOKEN FOR, NO LONGER AVAILABLE.

0 Replies

533 Views

Last post by Layden Butler
Sat Apr 13, 2024 3:36 pm
FS Radiator Water Bags (SOLD)

Last post by ThreePedalTapDancer « Sat Apr 13, 2024 2:15 pm

by ThreePedalTapDancer » Sat Apr 13, 2024 2:15 pm

Two original T era canvas radiator water bags. Nice graphics, neat item for your next tour. Complete with cap, and cork stopper. These were used to carry cool water. When filled, they would sweat the water through the canvas, resulting in cold water to drink or to pour in radiator. 110 includes shipping.

IMG_0660.jpeg

0 Replies

528 Views

Last post by ThreePedalTapDancer
Sat Apr 13, 2024 2:15 pm
WTB 1912 Running Boards

Last post by Bill Everett « Sat Apr 13, 2024 2:09 pm
Replies: 1
by Bill Everett » Thu Apr 04, 2024 11:08 am

First post

I'd like to find a new pair that you're not going to use.

Please text me a couple of pictures at 901-496-8795, or e-mail at bill.everett@epickett.com, as well as letting me know how much $$ you'd like.

Thanks.

Last post

A used pair would work, too. Please text me a couple of pictures at 901-496-8795, or e-mail me at bill.everett@epickett.com, as well as letting me know how much $$ you'd like.

Thanks.

Bill Everett

1 Replies

634 Views

Last post by Bill Everett
Sat Apr 13, 2024 2:09 pm
small emergecy brake drums

Last post by dinosbunny « Sat Apr 13, 2024 12:48 pm
Replies: 2
by dinosbunny » Thu Apr 11, 2024 11:07 pm

First post

For Sale..Pair of small emergency brake drums $25 plus shipping
hub4.jpg
hub3.jpg
hub2.jpg

Last post

sold, pending payment, thank you

2 Replies

610 Views

Last post by dinosbunny
Sat Apr 13, 2024 12:48 pm
26-27 running board brackets

Last post by dinosbunny « Sat Apr 13, 2024 12:47 pm
Replies: 3
by dinosbunny » Thu Apr 11, 2024 10:59 pm

First post

For Sale..Pair of 26-27 running board bracket, good condition, $30 plus shipping
bracket1.jpg
bracket2.jpg
bracket3.jpg

Last post

sold to morgan, pending payment, please check your email, thank you

3 Replies

674 Views

Last post by dinosbunny
Sat Apr 13, 2024 12:47 pm
FS Brass Long Horn (SOLD)

Last post by MikeG « Sat Apr 13, 2024 11:48 am
Replies: 2
by ThreePedalTapDancer » Fri Apr 12, 2024 3:26 pm

First post

Original “Long Horn 3” manually operated ahooga horn. Very nice, clean condition. No damage. Brass funnel. Works great. Ready to mount and use. 9.5 long. 250 includes shipping.

IMG_0638.jpeg IMG_2832.jpeg

Last post

Ed, I will buy this if it is still available. I will send you a message. Thanks, MikeG

2 Replies

751 Views

Last post by MikeG
Sat Apr 13, 2024 11:48 am
Valve lappers/ wall hangers fs

Last post by CTLeonard « Sat Apr 13, 2024 9:17 am
Replies: 2
by CTLeonard » Fri Apr 12, 2024 12:49 pm

First post

Couple of old girls for the display case. 8.00 each plus shipping. ctleonard64@gmail.com they do work IMG_20240412_114523385.jpg IMG_20240412_114509915.jpg

Last post

The long one is still available, yes it works

2 Replies

681 Views

Last post by CTLeonard
Sat Apr 13, 2024 9:17 am
SOLD! Gas Gauge for Model T tank

Last post by Walt Wise « Sat Apr 13, 2024 6:30 am
Replies: 1
by Walt Wise » Fri Apr 12, 2024 8:21 am

First post

Gasoline gauge for Model T tank for sale. When screwed into the tank, you release the lock on top of the cap and the cork float activates the center rod in the cap to go up, which reveals by the gallon measurements on the rod to inform you of the number of gallons of gas in the tank. Asking $95 plus $14 shipping to any of the lower 48 contiguous...

Last post

Thanks MTFCA!!!

Walt Wise

1 Replies

642 Views

Last post by Walt Wise
Sat Apr 13, 2024 6:30 am
FS Bevin Brass Bermuda Bell (SOLD)

Last post by Lawrence « Fri Apr 12, 2024 10:20 pm
Replies: 1
by ThreePedalTapDancer » Fri Apr 12, 2024 3:00 pm

First post

Here is an original T era Bevin polished brass Bermuda bell. It has a nice polish, no dents or cracks. It works great, very loud DING DONG! when plunger is depressed. It has a 1/8 thick polished brass mounting plate, brass plunger knob, and brass screws. Very clean. Ready to mount under your floor board. I have one on both my Ts. Great fun. 275...

Last post

Hi ed, i would like your bell please. You sent a horn to me last year. Thanks Chris Lawrence. NZ

1 Replies

554 Views

Last post by Lawrence
Fri Apr 12, 2024 10:20 pm
FS 3-1932 B Manifolds. $75 FOR ALL

Last post by got10carz « Fri Apr 12, 2024 9:48 pm
Replies: 1
by got10carz » Mon Mar 25, 2024 11:49 am

First post

For Sale. 3 Manifolds. These are considered a performance upgrade on a T. All have issues, intake has 1 broke ear. 1 exhaust has crack, 1 exhaust worn pipe flange.
$75 for all. Steve 701 212 5009

Last post

To the top.

1 Replies

789 Views

Last post by got10carz
Fri Apr 12, 2024 9:48 pm
Assortment of wrenches fs

Last post by DSWKPT « Fri Apr 12, 2024 6:17 pm
Replies: 5
by CTLeonard » Thu Apr 11, 2024 12:27 pm

First post

Believe to be mainly A wrenches, the T-handle is a Firestone. 8.00 each plus shipping. ctleonard64@gmail.com IMG_20240411_112040985.jpg IMG_20240411_112029354.jpg

Last post

Hey Mike, I’d like to buy one of your wrenches, the right one of the two with the hex holes behind the open end. I’ll send you email through the forum. Thanks.

5 Replies

963 Views

Last post by DSWKPT
Fri Apr 12, 2024 6:17 pm
FS: Brass Radiator Neck License Plate Bracket (SOLD)

Last post by bryan831daniel « Fri Apr 12, 2024 6:01 pm
Replies: 1
by WaltM » Fri Apr 12, 2024 1:28 pm

First post

(SOLD) Thanks, Walt

Last post

Voicemail sent. ~Bryan

1 Replies

565 Views

Last post by bryan831daniel
Fri Apr 12, 2024 6:01 pm
FS: Transmission Driven Gear puller Dealer Tool 5Z326 (SOLD)

Last post by RGould1910 « Fri Apr 12, 2024 11:57 am
Replies: 1
by WaltM » Fri Apr 12, 2024 11:39 am

First post

SOLD Thanks, Walt

Last post

Email sent

1 Replies

570 Views

Last post by RGould1910
Fri Apr 12, 2024 11:57 am
FS; Threads Restorer/chase National Tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:52 am

by WaltM » Fri Apr 12, 2024 11:52 am

(SOLD) Thanks, Walt

0 Replies

599 Views

Last post by WaltM
Fri Apr 12, 2024 11:52 am
FS: Transmission Clutch drum removal tool. 5Z314 dealer tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:34 am

by WaltM » Fri Apr 12, 2024 11:34 am

(SOLD) Thanks, Walt

0 Replies

539 Views

Last post by WaltM
Fri Apr 12, 2024 11:34 am
FS: Apco Perch removal Tool (SOLD)

Last post by WaltM « Fri Apr 12, 2024 11:30 am

by WaltM » Fri Apr 12, 2024 11:30 am

(SOLD) Thanks, Walt

0 Replies

578 Views

Last post by WaltM
Fri Apr 12, 2024 11:30 am
Running board tool box fs

Last post by CTLeonard « Fri Apr 12, 2024 11:22 am

by CTLeonard » Fri Apr 12, 2024 11:22 am

Has had a hard time. Missing a latch extra holes and some dents. More was spent on primer than it's worth. Measures 21 ,9 deep 6 tall. 15.00 plus shipping. ctleonard64@gmail.com IMG_20240412_101040388.jpg IMG_20240412_101022948.jpg IMG_20240412_101015120.jpg IMG_20240412_100940653.jpg

0 Replies

553 Views

Last post by CTLeonard
Fri Apr 12, 2024 11:22 am
ignition switch

Last post by vping « Thu Apr 11, 2024 8:34 pm
Replies: 7
by dinosbunny » Sun Apr 07, 2024 11:44 pm

First post

For Sale... 19-25 ignition switch, original plate, switch and meter, has a reproduction pin type back plate with new tumbler from langs with 2 keys. All taken down to bare metal, primed, painted and tested for continuity, ready to install. $165.00 shipped anywhere in the lower 48.
switch1.jpg
switch2.jpg
switch3.jpg
switch4.jpg

Last post

Wish I jumped on this.

7 Replies

2429 Views

Last post by vping
Thu Apr 11, 2024 8:34 pm
for sale 15-16 steering gear case

Last post by dinosbunny « Thu Apr 11, 2024 7:31 pm
Replies: 6
by dinosbunny » Mon Apr 08, 2024 11:09 pm

First post

For Sale 15-16 brass steering gear case
$30 plus shipping
quad1.jpg
quad2.jpg
quad3.jpg
quad4.jpg

Last post

Gear box is sold pending payment

6 Replies

1145 Views

Last post by dinosbunny
Thu Apr 11, 2024 7:31 pm
A I don't know coil. Sold, someone had a use for her

Last post by RajoRacer « Thu Apr 11, 2024 5:24 pm
Replies: 5
by CTLeonard » Thu Apr 11, 2024 1:43 pm

First post

Never seen one like this. Does anybody have to have it? ctleonard64@gmail.com IMG_20240411_123959979.jpg IMG_20240411_123942393.jpg IMG_20240411_123935083.jpg

Last post

The coil in the cleaner above also has the same lid !

5 Replies

1429 Views

Last post by RajoRacer
Thu Apr 11, 2024 5:24 pm
coil box 17/25

Last post by BarrettR « Thu Apr 11, 2024 4:39 pm
Replies: 5
by Melba Nolan » Mon Nov 13, 2023 7:58 pm

First post

For sale: coil box. In good condition. $155 plus postage.

20220607_092858.jpg 20220607_092949.jpg

20220607_092909.jpg

Last post

In 17' the switch was on the coil box.

5 Replies

1332 Views

Last post by BarrettR
Thu Apr 11, 2024 4:39 pm
Wooden top bows available

Last post by CTLeonard « Thu Apr 11, 2024 3:47 pm
Replies: 4
by CTLeonard » Wed Apr 10, 2024 2:51 pm

First post

I've recently started to steam bend oak bows for model A roadsters. Thought I could offer up bows for the model T. It would require a pattern or at least a good drawing for me to go from. Any inquiries please email me at ctleonard64@gmail.com IMG_20240410_133912524.jpg IMG_20240410_133844716.jpg IMG_20240410_133832764.jpg IMG_20240410_133743880.jpg

Last post

Appreciate the offer. Thank you

4 Replies

1299 Views

Last post by CTLeonard
Thu Apr 11, 2024 3:47 pm
WTB Original 1912 Hubcaps - one or more

Last post by Original Smith « Thu Apr 11, 2024 12:34 pm
Replies: 5
by 1913Runabout » Thu Apr 04, 2024 12:58 pm

First post

I'm looking to buy one or more original 1912 only hubcaps in serviceable condition. I have nice reproductions, but prefer original even if not perfect. Canadian caps are superficially similar, but do not have the tall 'F' and sometimes have a little triangle below the 'Ford'. Note that there is no 'MADE IN USA'. My first time posting. I thing...

Last post

I agree with you Brian. Stay with it, you will find them. Even the correct common 1913 hubcaps are getting hard to find.

5 Replies

1356 Views

Last post by Original Smith
Thu Apr 11, 2024 12:34 pm
26-27 front fender brace fs

Last post by CTLeonard « Thu Apr 11, 2024 9:20 am

by CTLeonard » Thu Apr 11, 2024 9:20 am

One is getting pitted, both have been welded. One needs .more welding. 30.00 for the pair plus shipping. There's also pictured another good set that I don't know the year of. ctleonard64@gmail.com IMG_20240411_081312031.jpg IMG_20240411_081253169.jpg IMG_20240411_081233106.jpg IMG_20240411_081210005.jpg IMG_20240411_081159768.jpg

0 Replies

423 Views

Last post by CTLeonard
Thu Apr 11, 2024 9:20 am
Stewart Speedometer Gear

Last post by BobP « Wed Apr 10, 2024 8:58 pm

by BobP » Wed Apr 10, 2024 8:58 pm

For sale Stewart speedometer gears. Very good clean condition. Look at the pictures, the numbers are on them. $85 plus shipping. NO TEXTING. five07458677eight.

0 Replies

395 Views

Last post by BobP
Wed Apr 10, 2024 8:58 pm

New Topic

9200 topics

Page 41 of 92
- Jump to page:
Previous
1
…
39
40
41
42
43
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum