Classifieds - Parts - Page 49

Classifieds - Parts

New Topic

10541 topics

Page 49 of 106
- Jump to page:
Previous
1
…
47
48
49
50
51
…
106
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84527 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Alternator F S

Last post by elliott1936 « Tue Jun 11, 2024 12:45 pm
Replies: 4
by elliott1936 » Sat Jun 08, 2024 5:24 pm

First post

Good condition alternator for sale. $100.00 plus the cost of shipping, which should be about $30.00 Contact Tom Elliott Five03-644-937Four, Or E-mail to twoelliott@msn.com

Last post

Yes the alternator is sold. Tom

4 Replies

1198 Views

Last post by elliott1936
Tue Jun 11, 2024 12:45 pm
WTB used wire wheel hub caps

Last post by Dennis Prince « Tue Jun 11, 2024 12:38 pm
Replies: 3
by Dennis Prince » Sun Jun 09, 2024 10:38 pm

First post

I am looking for a set of wire wheel hub caps. I don't want them to be to nice, nice patina would be great, maybe some that you took of to do a restoration. Thanks, Dennis

Last post

I have hub caps coming. I am always amazed by the Model T community. They are always willing to share their time, resources and knowledge with whoever needs help. Thank you, Robert.

3 Replies

1167 Views

Last post by Dennis Prince
Tue Jun 11, 2024 12:38 pm
FS NEW ASSEMBLED RUCKSTELL AXLE

Last post by Mark Chaffin « Tue Jun 11, 2024 9:35 am
Replies: 5
by Mark Chaffin » Thu Mar 07, 2024 4:57 pm

First post

I built this Ruckstell for a project I am no longer pursuing. Specifics are as follows:

* Complete new Ruckstell kit (26/27)
* New axle shafts, NOS axle gears, ring gear, bearings, sleeves, etc.
* Shortened driveshaft tube and radius rods for Layne Warford. New driveshaft, bearings, bushings, and 12 tooth pinion.
*Dan McEachern juice brakes and...

Last post

The reversed main leaf was purchased.

5 Replies

2288 Views

Last post by Mark Chaffin
Tue Jun 11, 2024 9:35 am
Wanted: 1915/1916 Certain Parts

Last post by Joe Bell « Tue Jun 11, 2024 6:37 am
Replies: 9
by Stephen1915 » Mon Jun 10, 2024 9:04 am

First post

•I am looking for an original (nice condition) gas tank cap that is correct for 1915/1916 and possibly other years.

•Looking for a Hot Air Pipe in nice condition for the same years.

•In need of a 1915-1917 Steering column, and horn button!

Thanks!

Text or Call 314-287-1901

Last post

I have a steering column for the 15-16, most do not know they are different, how long both levers are. Tiffin Ohio

9 Replies

1664 Views

Last post by Joe Bell
Tue Jun 11, 2024 6:37 am
WTB Iron water pump

Last post by Jimmie « Mon Jun 10, 2024 10:28 pm
Replies: 4
by Bryce S. » Fri Oct 13, 2023 8:17 pm

First post

I am wanting to do away with the aluminum water pump on my T due to it constantly reacting with the iron block and causing that fun chemical reaction that ruins everything. Are there any good iron ones out there that would be a good replacement that one would consider selling me? And yes..... I know everyone thinks I should do it the way Henry...

Last post

I have couple of different water pumps. Both spin

One has a broken mount casting - I have the piece - it could be brazed.

I live in Michigan.

4 Replies

1282 Views

Last post by Jimmie
Mon Jun 10, 2024 10:28 pm
WTB: 1912 early frame.

Last post by Jimmie « Mon Jun 10, 2024 10:09 pm
Replies: 2
by michaelb2296 » Fri Apr 19, 2024 10:47 am

First post

It would be nice to find one in good shape!

Michael

Last post

I have a frame that I have been told is a 1914 - 1916. It has surface rust but is very solid!
I can send photos. I live in Michigan.

1-231-250-5346

2 Replies

908 Views

Last post by Jimmie
Mon Jun 10, 2024 10:09 pm
WTB 26/27 Steering shaft

Last post by Jimmie « Mon Jun 10, 2024 9:55 pm
Replies: 2
by Tbird » Tue Apr 16, 2024 9:37 pm

First post

Looking for a loose 26/27 steering shaft. Doesn’t have to have the mounting bracket or pitman arm.
mikebird@lifeattheridge.net

Last post

I have a steadiness shaft but I am not sure of the year.
Can you give me some details I should.look for and I will get back to you.

Jimmieclint@gmail.com

231-250-5346. Iive in Michigan

2 Replies

802 Views

Last post by Jimmie
Mon Jun 10, 2024 9:55 pm
FS Samson Tiger Manual Ahooga Horn

Last post by ThreePedalTapDancer « Mon Jun 10, 2024 11:28 am
Replies: 6
by ThreePedalTapDancer » Tue Jan 09, 2024 6:05 pm

First post

Rare Samson Tiger non-electric manual ahooga horn. Excellent condition. This unique horn utilizes a fluted knob instead of a plunger. Works great. The fluted knob is simply turned and with each twist, the horn emits a very loud “ AaaaaWhooo!” Very nice horn with nice paint. 11 inches long, 5 inch diameter bell. Ready to mount and use. 225 includes...

Last post

225 includes shipping.

6 Replies

1941 Views

Last post by ThreePedalTapDancer
Mon Jun 10, 2024 11:28 am
Wanted: 1915-16-17 Horn Button

Last post by Stephen1915 « Mon Jun 10, 2024 11:19 am

by Stephen1915 » Mon Jun 10, 2024 11:19 am

Figured I’d make a separate post for this to hopefully reach more folks.

I’m looking for a decent useable horn button for the early magneto horn cars. I know these can be elusive!

Included are some photos from past forum post.

Call or text 314-287-1901

0 Replies

645 Views

Last post by Stephen1915
Mon Jun 10, 2024 11:19 am
NOS Norman Rockwell Puzzle FS

Last post by Dan Hatch « Sun Jun 09, 2024 7:24 pm
Replies: 1
by Dan Hatch » Sun Jun 09, 2024 3:28 pm

First post

Here is another unopened Ford 50th Anniversary puzzle. These were made from Rockwell paintings that he did for the 50th anniversary of Ford. Not sure of date these were made, but no bar code. $35 + shipping. Email me at address in pictures. Thanks Dan
IMG_3717.jpeg
IMG_0260.jpeg

Last post

Spoken for. Thanks MTFCA

1 Replies

577 Views

Last post by Dan Hatch
Sun Jun 09, 2024 7:24 pm
#2 Rockwell NOS puzzle FS

Last post by Dan Hatch « Sun Jun 09, 2024 7:24 pm
Replies: 1
by Dan Hatch » Sun Jun 09, 2024 3:34 pm

First post

Here is another Rockwell puzzle made from a different Ford 50th Anniversary print. This one is showing Henry in his workshop building his first car. It is unopened so it is NOS. Not sure when it was made, but no bar code. $35 + shipping. Email me at address in pictures. Thanks Dan.
IMG_3719.jpeg
IMG_0260.jpeg

Last post

Spoken for Thanks MTFCA

1 Replies

487 Views

Last post by Dan Hatch
Sun Jun 09, 2024 7:24 pm
exhaust cut out. S O L D

Last post by mtntee20 « Sun Jun 09, 2024 3:44 pm
Replies: 2
by aDave » Sat Jun 01, 2024 4:14 pm

First post

Exhaust cutout with actuating pedal. S O L D
Do you mind looking at

yes, it's mine...with pictures. I am challenged when it comes to posting pictures here.
Dave

Last post

Dave,

It says this listing is no longer available.

2 Replies

1131 Views

Last post by mtntee20
Sun Jun 09, 2024 3:44 pm
Griffin brass accessory carburetor F/S

Last post by Layden Butler « Sun Jun 09, 2024 2:45 pm

by Layden Butler » Sun Jun 09, 2024 2:45 pm

All brass Griffin accessory carburetor for Model T Ford. $95, 48 state shipping $10.

0 Replies

805 Views

Last post by Layden Butler
Sun Jun 09, 2024 2:45 pm
Nickel valve stem cover package

Last post by Tadpole « Sun Jun 09, 2024 11:40 am
Replies: 4
by EricMac » Sun Jun 02, 2024 4:49 pm

First post

I have a set of dust covers for valve stems. The will need to go with metal stem tubes. They would be just the right finishing touch for a nickel era speedster. You will get everything you see in the first photo. $75.00 or best offer, US continental shipping included. Thanks!
Eric Macleod 20240602_163618.jpg 20240602_163634.jpg 20240602_163732.jpg

Last post

I’ll have to look and see if I’ve got any laying around

4 Replies

1423 Views

Last post by Tadpole
Sun Jun 09, 2024 11:40 am
FS: Used 1926-27 Spindles SOLD

Last post by Gene_French « Sun Jun 09, 2024 10:23 am
Replies: 1
by Rodger Erickson » Sun Jun 09, 2024 9:58 am

First post

FS: One pair 1926-27 Spindles. These look usable, except one is missing the bushings and one is missing the arm. SOLD!

27spdl01.jpg

27spdl02.jpg

27spdl03.jpg

Thanks for looking!

Last post

Roger:
sent email regarding purchase ...Gene French

1 Replies

635 Views

Last post by Gene_French
Sun Jun 09, 2024 10:23 am
Pre-war swap meet, northern Colorado

Last post by Gene_French « Sun Jun 09, 2024 10:18 am
Replies: 1
by Lil Teezy » Fri Jun 07, 2024 11:59 am

First post

I almost whiffed the swap meet happening tomorrow morning but luckily I caught on last minute. It’s at a great location with a history museum and easy access. All the cool kids were there last year! Unfortunately I don’t have time to set up a space, but will be attending no doubt. I’m feeling Mr. Archers’ recent post about swap meet attendance and...

Last post

Chris:
the meet was small this year , severe weather had been forecast for Saturday ...there were some interesting items at the meet and had good visits with many vendors and buyers including our old friend Dave Huson ... most vendors had packed up and left the site by 1:00 as dark clouds moved in... i did get into a thunder storm with heavy rain...

1 Replies

740 Views

Last post by Gene_French
Sun Jun 09, 2024 10:18 am
SOLD: 3 gear Bosch front drive

Last post by blauvelt « Sun Jun 09, 2024 9:39 am
Replies: 2
by blauvelt » Sat Jun 08, 2024 3:09 pm

First post

Please see pictures.

$225.00 delivered OBO lower 48.

Last post

Sold to the gentleman from Albany, MN!

2 Replies

1060 Views

Last post by blauvelt
Sun Jun 09, 2024 9:39 am
FS Tools Bearings Carbs

Last post by KimDobbins « Sun Jun 09, 2024 12:13 am
Replies: 13
by KimDobbins » Thu Jun 06, 2024 5:28 pm

First post

Email for more pictures. All plus shipping kdmks@att.net.

Last post

Perch puller is sold

13 Replies

2597 Views

Last post by KimDobbins
Sun Jun 09, 2024 12:13 am
Schrader 777

Last post by Kevin Pharis « Sat Jun 08, 2024 4:51 pm
Replies: 2
by Kevin Pharis » Sat Jun 08, 2024 3:25 pm

First post

Just tore down an old tire and saved this tube stem for some reason. You can have it for the $12 it will take to have USPS get it to you in the lower 48

IMG_2400.jpeg

Last post

It’s heading to Walt!

2 Replies

1040 Views

Last post by Kevin Pharis
Sat Jun 08, 2024 4:51 pm
Denman 6.00-20 tire

Last post by Kevin Pharis « Sat Jun 08, 2024 3:32 pm

by Kevin Pharis » Sat Jun 08, 2024 3:32 pm

Don’t the later TT’s use this size…? Really nice (old) Denman tire just removed from a rim that looks to have been restored in the 80’s. No noticeable cracking or damage. $50 plus shipping

IMG_2401.jpeg IMG_2402.jpeg IMG_2403.jpeg IMG_2404.jpeg

0 Replies

885 Views

Last post by Kevin Pharis
Sat Jun 08, 2024 3:32 pm
FS 12-13 Slant Top KW Coil Box (SOLD)

Last post by ThreePedalTapDancer « Sat Jun 08, 2024 3:05 pm

by ThreePedalTapDancer » Sat Jun 08, 2024 3:05 pm

Reproduction KW 12-13 slant top coil box. This is a well-made, unused, bare reproduction coilbox that was sized especially for the common later coils, that fit nice and snug. It is pre-drilled and ready to be assembled with your common coilbox hardware and contacts, and lunchbox style latches. It has a nice stain and finish, no damage, and is...

0 Replies

809 Views

Last post by ThreePedalTapDancer
Sat Jun 08, 2024 3:05 pm
Minnesota All T Reunion June8-9

Last post by BobP « Fri Jun 07, 2024 8:45 pm
Replies: 5
by BobP » Sun May 26, 2024 5:33 pm

First post

Hope to see you there

Last post

btttttttttttttttttt

5 Replies

1119 Views

Last post by BobP
Fri Jun 07, 2024 8:45 pm
SOLD Prest-O-Lite regulator - earliest style - Prestolite

Last post by Erik Johnson « Fri Jun 07, 2024 7:41 pm
Replies: 4
by Erik Johnson » Fri Jun 07, 2024 2:28 pm

First post

Sold - pending receipt of payment

Prest-O-Lite regulator

I believe this is the earliest style

Patent date 1910

$125 plus shipping

Or, I can deliver to the Sunday, June 9, 2024 Model T Ford swap meet at the Dakota County Fairgrounds in Farmington, MN

Last post

Tried to reply to your private message a second time and the recipient box doesn't populate and there is the following below the box, Some users couldn’t be added as they have disabled private message receipt.

Also, pulled up your profile and there's not way to send private message that route.

I'll send you an email.

4 Replies

1050 Views

Last post by Erik Johnson
Fri Jun 07, 2024 7:41 pm
Wanted: Brass era licence plate / tail light bracket like Neverout

Last post by Larry « Fri Jun 07, 2024 6:34 pm
Replies: 9
by neilson604 » Wed Jun 05, 2024 2:47 pm

First post

I'm looking for a period accessory license plate / tail light bracket for our big 1908 Welch touring car. Patent dates may go later.

Anything like the brass Neverout or other period examples would compliment the car. Example on an EMF shown.

hhneilson@gmail.com

Last post

Eric,
If I understand Harry correctly, He was concerned about the receiver and this bracket would work for the spade or post. The picture you posted shows the spade and post for hanging the light. The picture Harry posted has a light that would use the spade and not the post.

9 Replies

2135 Views

Last post by Larry
Fri Jun 07, 2024 6:34 pm
SOLD: Large Black and Nickel Bulb Horn Assembly from 1911-1914

Last post by GGZ « Fri Jun 07, 2024 6:14 pm
Replies: 3
by GGZ » Fri Mar 29, 2024 9:57 am

First post

SOLD to Jim in New York!

This is a very nice, early black and nickel bulb horn assembly that is from 1911 through 1914'ish. It is complete with the horn, horn mounting bracket, tubes, tube bracket, reed, etc. The horn itself is about 4 1/2 wide by 9 tall and the tubing is about 50 long. The horn appears to be original including the paint and the...

Last post

SOLD......

3 Replies

1138 Views

Last post by GGZ
Fri Jun 07, 2024 6:14 pm
1912 Holley Carburetor (SOLD)

Last post by BRENT in 10-uh-C « Fri Jun 07, 2024 4:44 pm
Replies: 8
by ThreePedalTapDancer » Mon May 06, 2024 5:16 pm

First post

Rare 1912 year Holley H1 4500 carburetor. This is a very clean and complete carburetor. Needs to be rebuilt. Includes the float, all internals, and a CRACK FREE brass bowl. It even has the correct original fuel line fitting. The internal venturi is still solid. Needs standard rebuild, including re-bushing the throttle shaft, new or modern float,...

Last post

Didn’t Stan post something about how he got that look with his ultrasound tank a few years ago.

Dan, I have an Vevor Ultrasonic tank that I generally use a degreaser in such as Awesome or Simple Green. It will do a great job of getting it degreased however it would take a special chemical to make it look like that. You really should get or make...

8 Replies

2223 Views

Last post by BRENT in 10-uh-C
Fri Jun 07, 2024 4:44 pm
Wanted: KR Wilson magneto gap tool

Last post by Stillwell « Fri Jun 07, 2024 12:19 pm

by Stillwell » Fri Jun 07, 2024 12:19 pm

Does anyone have a Model T magneto gap tool they are willing to sell?
Original or reproduction will be fine.

0 Replies

619 Views

Last post by Stillwell
Fri Jun 07, 2024 12:19 pm
brass steering gear case Reduced price

Last post by Melba Nolan « Thu Jun 06, 2024 11:05 pm
Replies: 6
by Melba Nolan » Sat Nov 04, 2023 11:57 pm

First post

For sale: Brass steering gear case. Needs cleaned and polished.. $100 plus postage.
20220825_134343.jpg 20220825_134421.jpg 20220825_134437.jpg 20220825_134351.jpg

Last post

move to top

6 Replies

1772 Views

Last post by Melba Nolan
Thu Jun 06, 2024 11:05 pm
W T B early water outlet 09-15

Last post by FATMAN « Thu Jun 06, 2024 2:00 pm
Replies: 2
by Burlingtontguy » Fri May 31, 2024 10:26 pm

First post

I need an early Water outlet to finish my 1911 roadster, I could use 2 as I have 1914 Ambulance to also finish, Call or E-mail
401-932-3191 Thanks, Dennis

Last post

I have some, Bob

2 Replies

891 Views

Last post by FATMAN
Thu Jun 06, 2024 2:00 pm
Valve tools FS

Last post by Scott Rosenthal « Thu Jun 06, 2024 1:36 pm
Replies: 6
by Dan Hatch » Sat Jun 01, 2024 3:29 pm

First post

Found these in a bucket of stuff. $7.50 + shipping for the pair. Email me at address in the pictures. Thanks Dan
IMG_3708.jpeg
IMG_0260.jpeg

Last post

Thanks Frank. Ship address for the petcock with the T handle is
919 Mt. Hope Ave. Cinti, Ohio 45204
Please shoot me your address and total with shipping. Please do not use MTFCA messaging system, as mine either doesn't work or I have screwed something up so that it doesn't work properly.
Regards,
Scott

6 Replies

1335 Views

Last post by Scott Rosenthal
Thu Jun 06, 2024 1:36 pm
Stewart speedometer mounting bracket wanted

Last post by John A Kelso « Thu Jun 06, 2024 12:04 pm
Replies: 2
by Layden Butler » Sat Apr 13, 2024 1:55 pm

First post

Bracket needed to mount my Stewart speedometer head to a wooden firewall. Any of these pictured would work, brass or iron, or any other style. Thanks for looking.

Last post

I've sent an email

2 Replies

933 Views

Last post by John A Kelso
Thu Jun 06, 2024 12:04 pm
Winfield carburetor mounting flange F/S

Last post by Layden Butler « Wed Jun 05, 2024 7:19 pm

by Layden Butler » Wed Jun 05, 2024 7:19 pm

Nice original Winfield aluminum mounting flange marked S64BB1, this takes an S or SR Winfield carburetor size BB and adapts it to an SAE 1 1/4 manifold ( 2 holes on 2 11/16 centers), has a vacuum tap with plug in it that can be used if desired. $85. 48 state shipping $10.

0 Replies

708 Views

Last post by Layden Butler
Wed Jun 05, 2024 7:19 pm
Reliance tachometer

Last post by Layden Butler « Wed Jun 05, 2024 3:38 pm
Replies: 3
by Layden Butler » Thu May 09, 2024 11:51 pm

First post

3 1/2 face Reliance tachometer, nice porcelain face and plated solid brass construction, change the face numbering to whatever range you want and gear the drive pickup ratio to your engine speed.

Last post

Any interest

3 Replies

1121 Views

Last post by Layden Butler
Wed Jun 05, 2024 3:38 pm
WTB Kingston Carburetor

Last post by speedytinc « Wed Jun 05, 2024 2:43 pm
Replies: 8
by desertexplorer » Mon Jun 03, 2024 5:23 pm

First post

Looking for a Kingston L-2 updraft carburetor for a project I’m working on.

Thanks!

Last post

Looking for a Kingston L-2 updraft carburetor for a project I’m working on.

Thanks!

Updraft L2

8 Replies

1651 Views

Last post by speedytinc
Wed Jun 05, 2024 2:43 pm
Vintage Ford Magazines

Last post by Erik Johnson « Wed Jun 05, 2024 1:33 pm

by Erik Johnson » Wed Jun 05, 2024 1:33 pm

144 issues of Vintage Ford published by the Model T Ford Club of America

$50 for the entire collection

Local pick up in south Minneapolis or I can deliver them to the Sunday, June 9, 2024 Model T Ford Reunion/swap meet at the Dakota County Fairgrounds in Farmington, MN.

Years, volumes and issue numbers listed below:

1969 - Volume 4: 3, 4, 5...

0 Replies

790 Views

Last post by Erik Johnson
Wed Jun 05, 2024 1:33 pm
WTB Original Rocky Mountain parts.

Last post by Original Smith « Wed Jun 05, 2024 1:33 pm
Replies: 7
by Original Smith » Mon Jun 03, 2024 1:15 pm

First post

Does anyone have these parts laying around? Could use more!

Last post

If you are willing to make the pull rod bolt for the brake pedal, and can make it out of tool steel I can supply another photo, and the exact dimensions.
I know of several guys who need this part.

7 Replies

1611 Views

Last post by Original Smith
Wed Jun 05, 2024 1:33 pm
1925 model t rolling-running chassis-SOLD

Last post by Edy « Wed Jun 05, 2024 11:43 am
Replies: 5
by Edy » Sun Jun 02, 2024 8:00 pm

First post

Running and rolling chassis with new tires mounted on it was 3000.00 now...4000.00 asking price sitting in Morristown Tennessee posting for a friend ... Robert 423-327-3788.... price has increased due to Robert adding a lot more parts... this was a complete running and driving 1925 two door and all he wanted was the body .... it has nice seats in...

Last post

Could not get pictures to download... and the price has increased because he added a lot more pieces... fenders and interior parts seat cushions and other stuff

5 Replies

1303 Views

Last post by Edy
Wed Jun 05, 2024 11:43 am
FS: 1926-1927 Wiring Looms (Switch & Commutator) Sold

Last post by Joer357 « Wed Jun 05, 2024 10:59 am
Replies: 5
by Rodger Erickson » Mon May 20, 2024 11:59 pm

First post

For sale: One reproduction Switch wiring harness and one commutator wiring harness for a 1926-1927 Model T Ford. These were made some years ago but never used. Asking $20 for both, not including shipping.

t26wrg01.jpg

Thanks for looking!

Last post

I would like to buy this can you call me on how to pay for this my zip is 60177 Joe 1-773-965-5483

5 Replies

1405 Views

Last post by Joer357
Wed Jun 05, 2024 10:59 am
Weaver tricycle jack plus parts jack

Last post by South Park Zephyr « Wed Jun 05, 2024 9:50 am
Replies: 2
by JH1427 » Sun Jun 02, 2024 4:19 pm

First post

$400.00
I can for no additional cost deliver to the Denver Swap meet Saturday the 8th. This is the larger Weaver twin post, tricycle jack. Use the send message thru here to contact me. Too many scammers. Jerry

Last post

Email sent

2 Replies

1056 Views

Last post by South Park Zephyr
Wed Jun 05, 2024 9:50 am
Bermuda bell FS

Last post by mtntee20 « Tue Jun 04, 2024 4:21 pm
Replies: 1
by Nv Bob » Mon Jun 03, 2024 11:43 pm

First post

Sutone brand Bermuda bell I believe 1950's but has great sound
$200 to your door in 48 states
Bob
Sparks Nv
Jalopyt@yahoo.com

Last post

Bob, Sent an email.

1 Replies

868 Views

Last post by mtntee20
Tue Jun 04, 2024 4:21 pm
Hayes RB tool box FS

Last post by CDooREDW « Tue Jun 04, 2024 10:34 am
Replies: 1
by Nv Bob » Mon Jun 03, 2024 11:47 pm

First post

Pending sale

Nice solid tool box by hayes see pics
15L x 8T x 7W
125 obo + shipping
Bob
Jalopyt@yahoo.com

Last post

Morning, Bob,
Sent you an email.
Thanks,
Ron in HSV

1 Replies

760 Views

Last post by CDooREDW
Tue Jun 04, 2024 10:34 am
Cal 15T plate SOLD

Last post by Charlie_26_TT_Ccab « Tue Jun 04, 2024 1:19 am
Replies: 1
by Nv Bob » Mon Jun 03, 2024 11:51 pm

First post

SOLD SOLD SOLD

can't use these 15 touring title with CA horseless Carriage plates
Last date on title 1973collectors piece or use on the t Chassis or car needing a title $250+ postage o

Last post

Sent you an email.

1 Replies

760 Views

Last post by Charlie_26_TT_Ccab
Tue Jun 04, 2024 1:19 am
Set wood bands 26-7 fs

Last post by Nv Bob « Mon Jun 03, 2024 11:40 pm

by Nv Bob » Mon Jun 03, 2024 11:40 pm

Set of wood bands 26-7 should be complete
$95 to your door in 48 states
Bob Sparks Nv
Jalopyt@yahoo.com

0 Replies

655 Views

Last post by Nv Bob
Mon Jun 03, 2024 11:40 pm
SOLD: 1915 - IOOF- Odd Fellows radiator badge

Last post by blauvelt « Mon Jun 03, 2024 9:34 pm

by blauvelt » Mon Jun 03, 2024 9:34 pm

Nice piece. Well made. $50.00 delivered. Lower 48. OBO.

Sold

0 Replies

814 Views

Last post by blauvelt
Mon Jun 03, 2024 9:34 pm
15-16 rear pass rear door hinge plate

Last post by Karl Von Neumann « Mon Jun 03, 2024 9:02 pm
Replies: 1
by Campbell Tellman » Mon Jun 03, 2024 3:19 pm

First post

Hey All!
Working on my 1916 touring car. Sheet metal where rear door hinge attaches through sheet metal into wood frame is messed up. Would someone be able to cut off six inches and sell it to me? Maybe I could explain it better in a phone call.
Campbell Tellman II
Beaufort, NC
252-528-0093

Last post

I may have that email me a pic of the area in question so I can see what you need

1 Replies

491 Views

Last post by Karl Von Neumann
Mon Jun 03, 2024 9:02 pm
Wanted: rear fender mount

Last post by Mark Gregush « Mon Jun 03, 2024 8:29 pm
Replies: 10
by Will_Vanderburg » Mon May 27, 2024 3:53 pm

First post

I’m looking for a rear fender mount rod that screws into the rear quarter pillar for a Centerdoor Sedan.

You’d think the ones for tourings were the same, but they are not. They are 1/2 inch shorter than CD ones.

I thought I had found one at Luray, but alas, it is too short. (Only paid $5 for it, so no big loss)

The threads on the end are all...

Last post

Ok I’ll break out the BFH!

:D

10 Replies

3107 Views

Last post by Mark Gregush
Mon Jun 03, 2024 8:29 pm
For Sale: Stevens Front Axle Tool Frame

Last post by Rajo23 « Mon Jun 03, 2024 7:06 pm
Replies: 1
by Ed Fuller » Mon Jun 03, 2024 6:27 pm

First post

For Sale: Stevens Front Axle Tool Frame.

I’m not an expert on these, but I’m pretty sure this is an original and not a reproduction. I only have what’s shown in the pictures. The “T” handle turns and threads look fine.

$250 plus shipping in the U.S.A.

IMG_4318.jpeg

IMG_4319.jpeg

IMG_4320.jpeg

IMG_4321.jpeg

Last post

I will buy it!

1 Replies

742 Views

Last post by Rajo23
Mon Jun 03, 2024 7:06 pm
Sold: Sherman speed equipment - head, sump, block and dual spark head

Last post by DustySpokes « Mon Jun 03, 2024 1:53 pm
Replies: 3
by blauvelt » Sun Jun 02, 2024 11:54 am

First post

SOLD

Sherman Super Fire dual spark head (probably >8:1, possible 10:1)
Sherman tapper cover
Sherman 4 dip deep sump
Custom Sherman 8 port block

SOLD + shipping from Tucson, AZ. may deliver depending on location.

Last post

$1500 sounds like a great deal to me. It would take a fellow a good amount of time to round up all 4 parts . I have never seen an engine block like this for sale even. If I did not already own an NOS head exactly like this, I would go for this package ! ( I am just sayin') :-) -Dusty

3 Replies

1285 Views

Last post by DustySpokes
Mon Jun 03, 2024 1:53 pm
WTB: Pair speedster bucket seats

Last post by skyhunter « Mon Jun 03, 2024 1:07 am

by skyhunter » Mon Jun 03, 2024 1:07 am

Looking for a pair of bucket seats for a speedster, shells are fine. Preferably in the northeast. The ride from CA is just too cost prohibitive.

0 Replies

684 Views

Last post by skyhunter
Mon Jun 03, 2024 1:07 am
Wanted To Buy A Texas T Distributor Adapter

Last post by Tmooreheadf « Sun Jun 02, 2024 9:12 pm
Replies: 1
by J1MGOLDEN » Sun Jun 02, 2024 5:43 pm

First post

I need a Texas T Distributor Adapter with a good internal shaft or a good internal shaft. Jim golden, Bowie, Maryland

Last post

Have you called Birdhaven? I have bought shifts from them before! And actually a better design than the original! One pice not two!

1 Replies

633 Views

Last post by Tmooreheadf
Sun Jun 02, 2024 9:12 pm
For Sale: PRICE REDUCED! Stewart Warner Hand Operated Tachometer

Last post by GGZ « Sun Jun 02, 2024 3:26 pm
Replies: 5
by GGZ » Sat Jan 13, 2024 1:32 pm

First post

PRICE REDUCED: 75.00 postpaid in the USA!

This Stewart Warner Hand Operated Tachometer is probably from the 1950s. It is New Old Stock and includes two rubber tips and the original instructions in the original envelope. It measures about 2 3/4 inches in diameter. A great piece to measuring revolutions per minute (R.P.M.). A collectible that is a...

Last post

Reduced to 75.00 postpaid in the USA!

5 Replies

1721 Views

Last post by GGZ
Sun Jun 02, 2024 3:26 pm
Schrader valve stem covers Sold

Last post by Layden Butler « Sat Jun 01, 2024 10:46 pm

by Layden Butler » Sat Jun 01, 2024 10:46 pm

4 Schrader tire tube stem dust covers

0 Replies

843 Views

Last post by Layden Butler
Sat Jun 01, 2024 10:46 pm
Prest-O-Lite tank regulator F/S

Last post by Layden Butler « Sat Jun 01, 2024 6:20 pm

by Layden Butler » Sat Jun 01, 2024 6:20 pm

Regulator assembly for 4 diameter small tank, often called the MC tank, complete with hose barb and needle control valve, $125, 48 state shipping $12.

0 Replies

713 Views

Last post by Layden Butler
Sat Jun 01, 2024 6:20 pm
Post removed

Last post by TheSaintDiscJockey « Sat Jun 01, 2024 1:19 pm
Replies: 1
by Stephen1915 » Sat Jun 01, 2024 6:54 am

First post

Post removed.

Last post

You want to move this over to Classifieds -Vehicles.

1 Replies

1002 Views

Last post by TheSaintDiscJockey
Sat Jun 01, 2024 1:19 pm
FS Standard horn bell

Last post by fordrelic « Sat Jun 01, 2024 11:02 am
Replies: 1
by fordrelic » Sat Mar 23, 2024 3:39 pm

First post

For Sale: Horn bell for a standard horn.
$25 plus shipping.

standard horn bell.jpg

Last post

to the top

1 Replies

857 Views

Last post by fordrelic
Sat Jun 01, 2024 11:02 am
FS ring and pinion

Last post by fordrelic « Sat Jun 01, 2024 10:53 am
Replies: 1
by fordrelic » Mon May 27, 2024 4:04 pm

First post

For Sale a nice set 11/40 ring and pinion gears.
May be NOS?
Ring gear has Ford Script.

$300 plus $20 shipping

T ring pinion gear.jpg T ring pinion gear 2.jpg T ring gear 3.jpg T ring gear 4.jpg T ring gear 5.jpg

Last post

Make offer if interested.

1 Replies

744 Views

Last post by fordrelic
Sat Jun 01, 2024 10:53 am
TT/Depot Hack mirror - Sold

Last post by TheSaintDiscJockey « Fri May 31, 2024 9:18 pm
Replies: 2
by TheSaintDiscJockey » Fri May 31, 2024 3:30 pm

First post

Mirror with arm. Complete. Ready to install.
Screws or bolts into a wood post.
$45.00.
Plus shipping.
Text: 6 zero nine, 9 two zero, four two 2 zero.
Or pm. 20240531_144256.jpg

Last post

Mirror is sold. Many thanks for the interest!

2 Replies

744 Views

Last post by TheSaintDiscJockey
Fri May 31, 2024 9:18 pm
Model T generator FS

Last post by JTT3 « Fri May 31, 2024 7:21 pm
Replies: 2
by elliott1936 » Wed May 29, 2024 1:31 pm

First post

Rebuilt model T generator for sale. This was rebuilt a few years ago and put away for future use. I don't need it now, so it is for sale. I paid $190.00 for the rebuild and will ask $150.00 for it now, plus the cost of shipping. Tom five 03-644-937-Four. E-mail me for pictures.

Last post

Tom sent you an email. Thanks John

2 Replies

1100 Views

Last post by JTT3
Fri May 31, 2024 7:21 pm
FS: original E&J (lights) Motor Lamps Catalog - 1917

Last post by blauvelt « Fri May 31, 2024 3:42 pm
Replies: 2
by blauvelt » Fri May 31, 2024 3:28 pm

First post

Original 1917 Edmunds and Jones - Motor Lamps - catalog from 1917. In excellent condition. 4 x 6.75 19 pages.

35.00 delivered, lower 48. If outside, please contact.

Last post

Sent you an email. Thanks!

2 Replies

714 Views

Last post by blauvelt
Fri May 31, 2024 3:42 pm
Gray & Davis - original - Book of Instructions (pre-WW1)

Last post by blauvelt « Fri May 31, 2024 3:39 pm

by blauvelt » Fri May 31, 2024 3:39 pm

Gray and Davis book of instructions for starting and lighting systems. Paragraphs 1 to 5 are very important! Covers systems, trouble shooting and other misc.

5.25 x 8 - 47 pages

$30.00 delivered, lower 48.

0 Replies

690 Views

Last post by blauvelt
Fri May 31, 2024 3:39 pm
Original Houk wire wheel catalog - 1915/1916

Last post by Rajo23 « Fri May 31, 2024 9:23 am
Replies: 1
by blauvelt » Fri May 31, 2024 8:13 am

First post

22 pages, 3.25 x 6.25 . Excellent condition. Please see attached images. Period race images and car information for 1915. $75.00 delivered lower 48, please contact if outside.

Last post

I will buy it.
Will send an email to
Thank you!

1 Replies

689 Views

Last post by Rajo23
Fri May 31, 2024 9:23 am
engine joe model t head

Last post by Joe Bell « Fri May 31, 2024 6:21 am
Replies: 10
by tom leroux » Tue May 28, 2024 10:09 pm

First post

any one know any thing about this head
Engine Joe on head
thanks tom leroux

Last post

Craig ,I left plenty of casting to mill more off to raise compression if wanted and no you could not run high compression pistons with it.

10 Replies

2972 Views

Last post by Joe Bell
Fri May 31, 2024 6:21 am
Headlight fork. Found

Last post by Karl Von Neumann « Thu May 30, 2024 11:16 pm
Replies: 2
by Dollisdad » Thu May 30, 2024 2:49 pm

First post

This is a 1911-14 right side fork. I need a LEFT side fork. IMG_9387.jpeg

Last post

I need a right but have a left is this one for sale?

2 Replies

808 Views

Last post by Karl Von Neumann
Thu May 30, 2024 11:16 pm
WTB..Tool box

Last post by Jack Putnam, in Ohio « Thu May 30, 2024 10:06 pm

by Jack Putnam, in Ohio » Thu May 30, 2024 10:06 pm

WTB TOOL BOX rectangular type with original lock and latch. I'll be at the Richmond homecoming, if you have one bring it along or message me on this forum. Thanks all.

0 Replies

847 Views

Last post by Jack Putnam, in Ohio
Thu May 30, 2024 10:06 pm
Norman Rockwell puzzle FS NOS

Last post by RajoRacer « Thu May 30, 2024 4:51 pm
Replies: 1
by Dan Hatch » Thu May 30, 2024 4:22 pm

First post

Here is a Norman Rockwell print puzzle. It is one of the prints he did for Fords 50th Anniversary. It is unopened therefore it is NOS.
Not sure of the age, but there is no bar code on box. $35 +shipping Email me at address in the pictures. Thanks Dan
image2.jpeg

IMG_0260.jpeg

Last post

Sent you an email Dan !

1 Replies

696 Views

Last post by RajoRacer
Thu May 30, 2024 4:51 pm
Mother Lode Swap meet

Last post by jsaylor « Thu May 30, 2024 11:27 am

by jsaylor » Thu May 30, 2024 11:27 am

It's almost here. The 49th annual Mother Lode Model T Club Swap Meet, Auburn, California.
Early setup after 3pm Saturday, June 1. Opens 6 am Sunday, June 2. No reservations needed. See details on the flyer.

0 Replies

1019 Views

Last post by jsaylor
Thu May 30, 2024 11:27 am
Sold 1926 roadster body

Last post by Wayne Sheldon « Thu May 30, 2024 3:29 am
Replies: 34
by Karl Von Neumann » Wed Jan 10, 2024 7:47 am

First post

1926 roadster body for sale real decent shape minor rust trunk lid window posts window (no glass) and gas tank included includes a historical document for a 27 $2000 located SE Wisconsin

Last post

Sadly, they cannot all be saved.

34 Replies

7651 Views

Last post by Wayne Sheldon
Thu May 30, 2024 3:29 am
Sold sold sold

Last post by Junkyard4 « Wed May 29, 2024 10:38 pm
Replies: 1
by Junkyard4 » Thu May 23, 2024 11:05 pm

First post

sold sold sold

Last post

Lower price $25

1 Replies

776 Views

Last post by Junkyard4
Wed May 29, 2024 10:38 pm
For Sale- pair 17-25 Roadster fenders new

Last post by Mike Lebsack-Iowa « Wed May 29, 2024 5:11 pm

by Mike Lebsack-Iowa » Wed May 29, 2024 5:11 pm

Like it says, I am bringing a new pair of 17-25 rear Roadster fenders. As you know the new fenders do not come with brackets. I have a complete set of correct brackets that will go with the fenders. I will sell them below the catalogue price and you will save the price a shipping since I am bringing them to Richmond this Friday. List is $450 each...

0 Replies

773 Views

Last post by Mike Lebsack-Iowa
Wed May 29, 2024 5:11 pm
FS NOS ring and pinion gears

Last post by KimDobbins « Wed May 29, 2024 9:41 am
Replies: 2
by KimDobbins » Sat May 25, 2024 5:15 pm

First post

2 sets of ring and pinion gears, the lower right is mark auto brand, the on set of the left is un marked. $375.00 per set. The 2 ring gears on the top are un marked, $300.00. All plus shipping. Kdmks@att.net.

Last post

Both sets are sold, 2 ring gears are still available.

2 Replies

1327 Views

Last post by KimDobbins
Wed May 29, 2024 9:41 am
FS - Bosch ignition switch w/key

Last post by blauvelt « Tue May 28, 2024 9:36 pm
Replies: 1
by blauvelt » Sun May 26, 2024 10:52 pm

First post

Nice Bosch ignition switch with key. $150 delivered to the lower 48, please contact if anywhere else.

Last post

Sold!...!!!!

1 Replies

900 Views

Last post by blauvelt
Tue May 28, 2024 9:36 pm
Rear fender irons fs. Don't bother reading, these are fake thank you

Last post by RajoRacer « Tue May 28, 2024 3:22 pm
Replies: 3
by CTLeonard » Tue May 28, 2024 1:12 pm

First post

These are 1/2 rods that are 13 1/2 long. 50.00 for the pair plus shipping. ctleonard64@ Gmail.com 17169162459962303736963058090307.jpg 1716916268455558085287879245909.jpg

Last post

No worries Mike - I've seen some crafty pieces made from T parts !

3 Replies

1125 Views

Last post by RajoRacer
Tue May 28, 2024 3:22 pm
Headlight forks and irons fs. Sold

Last post by Dollisdad « Tue May 28, 2024 2:24 pm
Replies: 1
by CTLeonard » Tue May 28, 2024 1:04 pm

First post

Headlight forks and irons that are in good shape. 160.00 plus shipping. Ctleonard64@ Gmail.com IMG_20240528_115652115.jpg IMG_20240528_115657871.jpg IMG_20240528_115709243.jpg

Last post

I’ll take them

1 Replies

703 Views

Last post by Dollisdad
Tue May 28, 2024 2:24 pm
FS model T parts -All Sold-

Last post by KimDobbins « Tue May 28, 2024 8:28 am
Replies: 4
by KimDobbins » Mon May 27, 2024 10:13 pm

First post

Real nice 1913 rubes horn $150.00. Ford special speedometer set up. The head spins free, the drive has the mounting bracket. The cable has some wear spots. $800.00. Good used U joints, $25.00 each. NOS Ford 10 tooth pinion. $95.00. NOS headlight plugs. $20.00 each. All plus shipping kdmks@att.net.

Last post

10 tooth pinion and 2 unjoints are sold.

4 Replies

1812 Views

Last post by KimDobbins
Tue May 28, 2024 8:28 am
FS: Pair Brass E&J "1908" Side Lights c. 1912 SOLD

Last post by Larry LaPatka « Tue May 28, 2024 6:36 am
Replies: 2
by Rodger Erickson » Mon May 27, 2024 10:00 pm

First post

For Sale: One pair Edmunds & Jones 1908 Brass side lights, refurbished using mostly original parts. I believe these are correct for late 1912 or possibly very early 1913 Model T Fords, as they have an extra set of vent holes in the lower tier like the later Black & Brass lights. The brass parts have been polished to get a nice shiny brass look....

Last post

Roger,
Put my name on them. Sending you a P/M
Regards
Larry

2 Replies

862 Views

Last post by Larry LaPatka
Tue May 28, 2024 6:36 am
SOLD: 6 Volt Stewart Warner Fuel/Gas Gauge with Curved Lens

Last post by GGZ « Mon May 27, 2024 5:59 pm

by GGZ » Mon May 27, 2024 5:59 pm

SOLD! Thanks!
Here is a Stewart Warner Fuel Gauge. It is about 2 1/4 in diameter and has a curved lens. It is marked D358(?)E on the side, the other side is stamped S.W. INSP 53 and the back is stamped 6V. It looks great and might even be NOS. The lens has some dirt.

The price is 95.00 including in shipping in the USA.

Call me 734-730-4274 or...

0 Replies

868 Views

Last post by GGZ
Mon May 27, 2024 5:59 pm
FS KR Wilson HCCT frame

Last post by KimDobbins « Sun May 26, 2024 11:35 pm
Replies: 1
by KimDobbins » Sun May 26, 2024 1:51 pm

First post

This is all I have , just the bare frame. $150. Plus shipping. Kdmks@att.net.

Last post

Hector frame is sold

1 Replies

995 Views

Last post by KimDobbins
Sun May 26, 2024 11:35 pm
WTB: 2 Cylinder Ford

Last post by KiwiFordGuy « Sun May 26, 2024 11:11 pm
Replies: 22
by KiwiFordGuy » Thu Jan 14, 2021 3:47 am

First post

Hi all,

A long time since I have posted anything on this forum. So long in fact I had to create a new user name!!!! Glad it’s still going as strong as ever.

I am looking for a 2 Cylinder Ford ie A, AC, C or F if anyone knows of anything? I’d love a restored early Ford but the budget just isn’t that big... so a pretty complete and original...

Last post

Thanks Susanne,

I think the ghost of HF must be very busy!

22 Replies

8680 Views

Last post by KiwiFordGuy
Sun May 26, 2024 11:11 pm
FS - New ring & pinion 3.63 SOLD

Last post by t-time « Sun May 26, 2024 10:31 pm
Replies: 5
by t-time » Wed May 22, 2024 12:39 pm

First post

New 11/40 ring and pinion. Stamped Mark USA. $375 + $15 US shipping. Paypal f/f

Last post

last set sold to Ken. Thank you.

5 Replies

1721 Views

Last post by t-time
Sun May 26, 2024 10:31 pm
Fs ruckstell parts pile

Last post by RGould1910 « Sun May 26, 2024 8:30 pm
Replies: 8
by Karl Von Neumann » Wed Jan 10, 2024 5:27 pm

First post

Ruckstell parts just about a whole diff here the housing would need work need a tube. The guts are decent used the sliding clutch shows wear as well as the stock side of the carrier. Bearing needs replacing $800 plus the ride from pleasant prairie wisconsin or local pickup.

Would consider trading for 1913 parts building a speedster going to need...

Last post

Just a suggestion Karl. You dont need blueprints or original specs. If you have a dial caliper, measure the wear aeas and report. Yiou'll have better responses I think.

8 Replies

2871 Views

Last post by RGould1910
Sun May 26, 2024 8:30 pm
FS Top Irons, Saddles and Straps - Sold

Last post by Tony Delbianco « Sun May 26, 2024 6:10 pm
Replies: 1
by BuddMan » Sun May 26, 2024 3:37 pm

First post

Pair of original L-shaped 5/8 top irons that include the saddles, set screws, straps and buckles. All the threads are in fine condition. $62 for the pair and I'll pay for shipping in a snappy government USPS flat rate box.

Last post

David...I will take them...will send you an email thru the board here for payment info...Tony.

1 Replies

657 Views

Last post by Tony Delbianco
Sun May 26, 2024 6:10 pm
Frank Kulick Replica Parts FS

Last post by steven.newman1910 « Sun May 26, 2024 3:41 pm

by steven.newman1910 » Sun May 26, 2024 3:41 pm

I have decided to sell parts I have acquired to build a Frank Kulick race car replica. Parts came off a completed replica that was parted out. Link below for pictures when the parts were on that car:

$3,300.

Included in the price:

-Bucket seats, body, and firewall (Torpedo firewall brackets also included)
-Shortened drive shaft and torque...

0 Replies

1008 Views

Last post by steven.newman1910
Sun May 26, 2024 3:41 pm
NOS H2O Inlet FS

Last post by Jones in Aiken SC « Sat May 25, 2024 4:46 pm
Replies: 2
by Dan Hatch » Sat May 25, 2024 3:14 pm

First post

Got couple NOS water inlets FS. Nice Ford on these. $20 each + shipping. Email me at address in pictures. Thanks Dan.
IMG_3656.jpeg
IMG_3659.jpeg
IMG_0260.jpeg

Last post

I'll take one too. Toss it in my box along with the other stuff.

2 Replies

1292 Views

Last post by Jones in Aiken SC
Sat May 25, 2024 4:46 pm
FS: Rough Touring Rear Fender Brackets & Early Motor Mount

Last post by Rodger Erickson « Sat May 25, 2024 4:01 pm

by Rodger Erickson » Sat May 25, 2024 4:01 pm

For sale: One pair of forged rear fender brackets for touring cars, that will need to be straightened and filled-in. Asking $5 for the pair, not including shipping. Also an early (pre-1920) front motor mount with a broken-off bolt stuck inside. Also asking $5, not including shipping. I also have a teens-era spot light project, with a pull-type...

0 Replies

829 Views

Last post by Rodger Erickson
Sat May 25, 2024 4:01 pm
NOS Carrier FS

Last post by Scott_Conger « Sat May 25, 2024 3:57 pm
Replies: 1
by Dan Hatch » Sat May 25, 2024 3:17 pm

First post

Any interest in this NOS Rear end Carrier. You don’t find them that often anymore. $50 + shipping. Email me at address in pictures. Thanks Dan
IMG_3660.jpeg
IMG_3661.jpeg
IMG_0260.jpeg

Last post

Hey Dan

I know the value in that...email sent

1 Replies

1256 Views

Last post by Scott_Conger
Sat May 25, 2024 3:57 pm
SOLD!: 1911-1913 Frame

Last post by Dollisdad « Sat May 25, 2024 3:19 pm
Replies: 13
by Ed Fuller » Tue Sep 05, 2023 5:55 pm

First post

1911 to early 1913 frame. No heavy rust pitting, just has some surface rust. Front and rear crossmembers look to be in good shape and I don't see any cracks around the center holes. There is an old patch repair on the passenger frame rail. It looks like there was either a crack that was welded up or maybe the rail was bent and they cut it to bend...

Last post

Email sent.

13 Replies

3826 Views

Last post by Dollisdad
Sat May 25, 2024 3:19 pm
Free: 5/8" Lock Washers

Last post by Rodger Erickson « Sat May 25, 2024 12:55 pm
Replies: 6
by Rodger Erickson » Sun Nov 19, 2023 3:08 pm

First post

Free: 5/8 ID Lock washers, black oxide finish, never installed. I can fit approx 200 in a small flat rate box if anyone's interested. Thanks for looking!

58lw01.jpg

58lw02.jpg

Last post

Got more of these also...

6 Replies

1815 Views

Last post by Rodger Erickson
Sat May 25, 2024 12:55 pm
Free 1/2" Lock Washers

Last post by Rodger Erickson « Sat May 25, 2024 12:53 pm
Replies: 3
by Rodger Erickson » Mon Feb 19, 2024 7:53 am

First post

Free: 1/2 ID Lock washers, black oxide finish, new old stock, never installed. I can fit approx. 300 in a small flat rate box if anyone's interested. You pay shipping and they're yours.

I still have some 5/8 ID lock washers as well.

05wshr01.jpg

05wshr02.jpg

Thanks for looking!

Last post

Still have plenty more of these...

3 Replies

1390 Views

Last post by Rodger Erickson
Sat May 25, 2024 12:53 pm
Free: Unknown (Non-T) Fork-Mount Head Light Buckets

Last post by Rodger Erickson « Sat May 25, 2024 12:50 pm
Replies: 1
by Rodger Erickson » Sun May 19, 2024 10:43 am

First post

Free (You pay Shipping): One pair steel headlight buckets, probably ca. 1913 - 1917, early Nickel-Era. Diameter is 9 , and the brackets fit a fork that is approx 7 fork spacing. All I have are the buckets, no rims, reflectors, lenses or bulb sockets for these. The hinges and brackets look like carry-overs from earlier brass carbide lights, which...

Last post

Anyone interested?

1 Replies

890 Views

Last post by Rodger Erickson
Sat May 25, 2024 12:50 pm
Firewall brackets fs. Sold

Last post by CTLeonard « Sat May 25, 2024 12:06 pm

by CTLeonard » Sat May 25, 2024 12:06 pm

Reproduction brackets. 70.00 plus shipping. ctleonard64@ Gmail.com IMG_20240525_110336010.jpg IMG_20240525_110347116.jpg

0 Replies

754 Views

Last post by CTLeonard
Sat May 25, 2024 12:06 pm
License plate bracket fs. Sold

Last post by CTLeonard « Sat May 25, 2024 9:58 am

by CTLeonard » Sat May 25, 2024 9:58 am

Plate bracket for early motor mount. 25.00 plus shipping. Ctleonard64@ Gmail.com IMG_20240525_085445783.jpg IMG_20240525_085452739.jpg

0 Replies

723 Views

Last post by CTLeonard
Sat May 25, 2024 9:58 am
Round gas tank fs. Sold

Last post by Charlie_26_TT_Ccab « Sat May 25, 2024 12:18 am
Replies: 1
by CTLeonard » Fri May 24, 2024 4:00 pm

First post

Tank , brackets ,brass sediment bulb. It is unbelievable how clean the inside is. 250.00 plus shipping. Richmond is coming up, I'm in mt.vernon Indiana. Save on shipping! ctleonard64@gmail.com IMG_20240524_145422212.jpg IMG_20240524_145432381.jpg IMG_20240524_145453167.jpg

Last post

Sent you an email.

1 Replies

842 Views

Last post by Charlie_26_TT_Ccab
Sat May 25, 2024 12:18 am
FS Ruckstell parts for sale

Last post by KimDobbins « Fri May 24, 2024 11:56 pm
Replies: 2
by KimDobbins » Fri May 24, 2024 6:07 pm

First post

1 lot of ruckstell parts. All for $500.00 plus shipping. kdmks@att.net.

Last post

Ruckstell parts are sold

2 Replies

1051 Views

Last post by KimDobbins
Fri May 24, 2024 11:56 pm
WTB Old Style Carb Drain Valves

Last post by rickd « Fri May 24, 2024 9:19 pm
Replies: 2
by rickd » Fri May 24, 2024 12:31 pm

First post

I am looking for two (2) of the older style drain valves pictured on the 4-ball at the bottom of the picture. Email through this site preferred. Thanks in advance. 4ball.jpg

Last post

Thanks John. If I find a bunch I will share them.

2 Replies

865 Views

Last post by rickd
Fri May 24, 2024 9:19 pm
End of the week deal - Valves and taps sold - thank you for looking

Last post by Rick_Rice « Fri May 24, 2024 4:32 pm
Replies: 1
by Scott_Conger » Fri May 24, 2024 2:20 pm

First post

Several years ago, I put together a package for an out-of-country fellow who vanished after I got shipping cost for him...POOF...gone with the wind...vamoosed

Been sitting sealed up in package since end of 2021 - these are perfect, still sealed up, but sitting for almost 3 years...tired of the box kicking around all this time, so opened it up and...

Last post

Hi Scott,
Pursuant to your instructions, I sent you an email...I'll bite!

Kind Regards,

Rick Rice

1 Replies

1258 Views

Last post by Rick_Rice
Fri May 24, 2024 4:32 pm
Early motor mount fs. Sold

Last post by CTLeonard « Fri May 24, 2024 3:32 pm

by CTLeonard » Fri May 24, 2024 3:32 pm

Good mount fs. 75.00 plus shipping. Ctleonard64@ Gmail.com IMG_20240524_142829812.jpg IMG_20240524_142836232.jpg

0 Replies

755 Views

Last post by CTLeonard
Fri May 24, 2024 3:32 pm
One Man Top Sockets (Square)

Last post by michaelb2296 « Fri May 24, 2024 3:29 pm
Replies: 3
by CraigBothwell » Thu May 23, 2024 10:04 pm

First post

WANTED: (You would think that, given Ford made more than 15 million T''s, this would not be all that difficult.)

Anyway, I am looking for the upper (top if you will) sockets for a '24 touring. If doesn't work, I would like to
hear from anyone who has complete sets.

Craig Bothwell
bothwell.craig@gmail.com

Last post

john boorinakis
530-885-4956

if you're in a pinch he can do the sockets. he will not repair the hardware though... so, you probably need to weld and repair that before you send him the sockets to be restored. He's 3X what he used to be... It cost me $1200 for 1912 sockets. In 2010 it was $450.

3 Replies

1021 Views

Last post by michaelb2296
Fri May 24, 2024 3:29 pm
Sold sold sold

Last post by Junkyard4 « Fri May 24, 2024 3:00 pm

by Junkyard4 » Fri May 24, 2024 3:00 pm

Sold sold sold

0 Replies

720 Views

Last post by Junkyard4
Fri May 24, 2024 3:00 pm
Early H2O outlets FS

Last post by Dan Hatch « Fri May 24, 2024 1:32 pm
Replies: 2
by Dan Hatch » Fri May 24, 2024 12:52 pm

First post

I have been told these are getting hard to get. They look to be NOS. $20 each + shipping. Email me at address in pictures. Thanks Dan
IMG_3641.jpeg
IMG_3643.jpeg
IMG_0260.jpeg

Last post

All early ones sold , but I will see if I can find some more. Thanks Dan.

2 Replies

655 Views

Last post by Dan Hatch
Fri May 24, 2024 1:32 pm
Large assortment of frames, rear ends, wheel, wishbones, etc

Last post by donofnebraska « Fri May 24, 2024 1:19 pm
Replies: 1
by donofnebraska » Fri May 10, 2024 6:34 pm

First post

Large assortment of running gear parts. Doesn't include the blocks, engine assemblies or TT Ruckstell underdrive that are also in the large pile.
I am in the process of helping the son of a deceased friend dispose of his father's collection of Model T and A parts. The parts are located in Northeast Nebraska (near Norfolk) and would need to be...

Last post

Still for sale

1 Replies

886 Views

Last post by donofnebraska
Fri May 24, 2024 1:19 pm

New Topic

10541 topics

Page 49 of 106
- Jump to page:
Previous
1
…
47
48
49
50
51
…
106
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum