Classifieds - Parts - Page 59

Classifieds - Parts

New Topic

9271 topics

Page 59 of 93
- Jump to page:
Previous
1
…
57
58
59
60
61
…
93
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79776 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Buffalo wire wheels

Last post by tselliott « Tue Oct 10, 2023 2:13 am
Replies: 14
by tselliott » Fri Mar 31, 2023 2:31 am

First post

This is a nice solid set of wire wheels with Coker white wall tires. 30 x 3-1/2 Tires have never been run. No bent, loose, or missing spokes. There is some pitting on the rims and some flaking paint. Overall a nice set of buffalo wire wheels.
$2600
Scott Elliott
971-5O6-94O2

Last post

Bump to the top.
For those that might be interested I have checked shipping a couple of different times. About $250-$350 depending on business or residential delivery and location. I would be willing to check shipping again if somebody was interested.
Thanks,
Scott

14 Replies

5163 Views

Last post by tselliott
Tue Oct 10, 2023 2:13 am
Found! Wanted starter motor cover plates

Last post by KWTownsend « Mon Oct 09, 2023 10:36 pm
Replies: 7
by KWTownsend » Sat Oct 07, 2023 8:45 pm

First post

I'm looking for the block off covers where a starter motor goes on a late hogshead.

20231007_173648.jpg

20231007_173700.jpg

Thanks,

Keith

: ^ )

Last post

Parts found. Thanks, guys!

7 Replies

1097 Views

Last post by KWTownsend
Mon Oct 09, 2023 10:36 pm
Speedster hand air pump with gauge F/S

Last post by blauvelt « Mon Oct 09, 2023 10:30 pm
Replies: 2
by Layden Butler » Fri Oct 06, 2023 3:11 pm

First post

Pump to pressurize the gas tank, included is a new modern 5 pound gauge. $145 domestic shipping included.

Last post

Dropped and email. Thanks.

2 Replies

650 Views

Last post by blauvelt
Mon Oct 09, 2023 10:30 pm
FS Stewart Model 150/102

Last post by JBog « Mon Oct 09, 2023 9:35 pm

by JBog » Mon Oct 09, 2023 9:35 pm

This is my eBay listing.

0 Replies

461 Views

Last post by JBog
Mon Oct 09, 2023 9:35 pm
Spark plugs for sale

Last post by Larry Debaugh « Mon Oct 09, 2023 8:35 pm
Replies: 1
by Larry Debaugh » Sun Oct 08, 2023 1:31 pm

First post

4 Champion X metal top, Ford Script, new $180. 4 Champion 31 ,Ford Script, new $160. 4 Champion X straight side w/Pat. $180 used nice. 3 Kingston appear new $100 . 4 Firestone E100 used $80. All plus postage Larry Debaugh 4103361728

Last post

The Champion plugs are sold, still have the Kingston and Firestone…. Larry Debaugh 4103361728

1 Replies

685 Views

Last post by Larry Debaugh
Mon Oct 09, 2023 8:35 pm
ID non Ford water pump

Last post by t-time « Mon Oct 09, 2023 7:14 pm

by t-time » Mon Oct 09, 2023 7:14 pm

Cast numbers: MO-160-A, MO-161-A

0 Replies

484 Views

Last post by t-time
Mon Oct 09, 2023 7:14 pm
Unknown brackets fs. Sold

Last post by Sean Butler « Mon Oct 09, 2023 6:38 pm
Replies: 4
by CTLeonard » Mon Oct 09, 2023 2:10 pm

First post

In with t-parts, but don't have a clue what they are for. Seems they could be an important part. If you have to have them shoot me an offer. ctleonard64@gmail.com 16968747692994472744833279720620.jpg 16968749170844937324743766655165.jpg 16968749898725858258438342141574.jpg

Last post

Those are very desirable acetylene tank brackets. Much quicker to use than the full clamp/strap type. Not so sure as to the years the 2 were produced/used.

4 Replies

920 Views

Last post by Sean Butler
Mon Oct 09, 2023 6:38 pm
Cleanin up the shop - punch press tooling

Last post by Brent Reeb « Mon Oct 09, 2023 5:15 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 1:54 pm

First post

Someone has to have an iron worker or kick punch that uses 1” upper punch and 2” lower die tooling. You can have what I’ve got for the cost of shipping! Email thru the forum please

81B5C501-7EF4-47F4-A34D-395134874CB1.jpeg

Last post

Hello,
Please send cost bwreeb@comcast.net
or I can send you UPS #
Thank you
Brent

1 Replies

637 Views

Last post by Brent Reeb
Mon Oct 09, 2023 5:15 pm
FS Bronze Kingston L4

Last post by Gen3AntiqueAuto « Mon Oct 09, 2023 1:51 pm
Replies: 1
by Gen3AntiqueAuto » Sat Oct 07, 2023 9:35 am

First post

Bronze (1915?) Kingston L4 for sale - see video for details.

Last post

Bumping the post up for those that didn't see it.

1 Replies

312 Views

Last post by Gen3AntiqueAuto
Mon Oct 09, 2023 1:51 pm
Cleanin up the shop - case hardening compounds

Last post by Kevin Pharis « Mon Oct 09, 2023 12:38 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 2:00 pm

First post

Do your own heat treating…? These cans are unopened and yours for $50. Also will include a 3lb jar of cast iron shavings. Email thru the forum please

CEA100C9-C58D-42CF-B329-D9BC4DA59A30.jpeg

Last post

Sold! Thanks Gene!

1 Replies

553 Views

Last post by Kevin Pharis
Mon Oct 09, 2023 12:38 pm
For sale original carbide tank top Brass

Last post by Tim D « Mon Oct 09, 2023 9:52 am

by Tim D » Mon Oct 09, 2023 9:52 am

Very nice top. One crack on edge see picture. $200 plus shipping. Maybe very hard to find an original this nice.

0 Replies

483 Views

Last post by Tim D
Mon Oct 09, 2023 9:52 am
Kingston Coil Unit

Last post by Woody23 « Sun Oct 08, 2023 8:34 pm
Replies: 1
by Serge » Sun Oct 08, 2023 11:19 am

First post

Wanted Kingston Hight Bridge Coil Unit

Last post

Hello Serge,

I make and rebuild Kingston coils.

Call or email me.

David Woods
Williamston T Works (Facebook)
517-927-9232
Dwtworks@gmail.com

1 Replies

560 Views

Last post by Woody23
Sun Oct 08, 2023 8:34 pm
For Sale: 1912 Jno Brown Model 105 Tail Lamp

Last post by John Haynes « Sun Oct 08, 2023 5:07 pm
Replies: 6
by John Haynes » Sun Jun 20, 2021 5:05 pm

First post

For Sale is a Jno Brown model 105 Brass Tail Lamp. I believe this to be correct for 1912. There is a small crack on the mounting bracket that will need to be soldered. Asking $450.00 plus shipping. Please email me with questions or more photos.

Last post

The tail Lamp has been sold.

6 Replies

2622 Views

Last post by John Haynes
Sun Oct 08, 2023 5:07 pm
Misc. engine parts, ect.

Last post by Bodyman.315 « Sun Oct 08, 2023 4:39 pm
Replies: 1
by NU2theT » Mon Oct 02, 2023 4:46 pm

First post

Have various engine blocks, one 21 block with crank/piston and cam in place, 4 heads , various pedals and 26/27 transmission. 1 early and 1 later magneto. Everything $300.00 and it all goes together, local pick up only. Email would be the best to reach me.

Last post

Hi this Eric are these parts still available?

1 Replies

772 Views

Last post by Bodyman.315
Sun Oct 08, 2023 4:39 pm
Cleanin up the shop - cast brass script

Last post by Kevin Pharis « Sun Oct 08, 2023 4:39 pm
Replies: 2
by Kevin Pharis » Sun Oct 08, 2023 1:05 pm

First post

Cast brass Ford script with just the right amount of patina. $30 includes flat rate USPS in the lower 48. Email thru forum please

(Fender not included😉)

24DC194F-B6E7-40C6-AE0D-08172BF509D3.jpeg

Last post

Sold to David!

2 Replies

821 Views

Last post by Kevin Pharis
Sun Oct 08, 2023 4:39 pm
Cleanin up the shop - drill chuck arbors

Last post by Kevin Pharis « Sun Oct 08, 2023 4:38 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 2:12 pm

First post

Who has a lathe or drill press that uses a #2 Morse taper…? Here are 2 3/8-24 threaded drill chuck arbors and 2 #0 Jacobs taper arbors. These are new and unused Jacobs brand arbors. All for $30 shipped within the lower 48

397E5BBE-1871-4845-A113-95BF9B8755AF.jpeg

Last post

Sold to Marc!

1 Replies

547 Views

Last post by Kevin Pharis
Sun Oct 08, 2023 4:38 pm
Clean 20" Wire Wheels, Tires, Tubes, and Flaps

Last post by NorthSouth « Sun Oct 08, 2023 1:21 pm
Replies: 1
by NorthSouth » Sun Oct 08, 2023 1:18 pm

First post

Four clean 20” wire wheels
With tires tubes, flaps, Rocky Mountain Brake drums, and Ford drums, and brass knock-off hubs, and hub wrench. No-name brass.
Los Angeles.
$2,500.00 ...or best offer
Jim; six 2 six 788-63 thirty-four

Last post

Hub wrench

1 Replies

734 Views

Last post by NorthSouth
Sun Oct 08, 2023 1:21 pm
Looking for

Last post by Joe Bell « Sun Oct 08, 2023 8:39 am
Replies: 4
by Dollisdad » Sat Oct 07, 2023 8:33 am

First post

2 rear wheel hubs with small brake drums. 12 hub bolts and nuts. 1pr. early front fender irons. 1pr. 26-27 spindles. 1 straight spindle arm. 1 set 09-10 hud caps. Early front motor mount. Bottom leaf for rear spring. Rear spring u bolt set. Early no hump spool. Thanks.

Last post

I may have the fender irons for the forked lights but no eyelet ones for top strap?

4 Replies

983 Views

Last post by Joe Bell
Sun Oct 08, 2023 8:39 am
Firestone 440/450-21 whitewall tires

Last post by bobster1 « Sun Oct 08, 2023 6:02 am
Replies: 2
by bobster1 » Wed Sep 27, 2023 6:19 am

First post

I have 4 Firestone 440/450-21 tires with rubber stem tubes. 2 3/8” wide white walls. I took these off my speedster and have less that 500 miles on them, approx 5 years old. New cost $1412.00 plus tax and freight. These are like new and will be at Hershey for pickup (I will not ship) Sell for $800 cash. Space 1695805696779blob.jpeg RWI 18-21...

Last post

Sold at Hershey!

2 Replies

749 Views

Last post by bobster1
Sun Oct 08, 2023 6:02 am
Bermuda Bell

Last post by bobster1 « Sun Oct 08, 2023 5:28 am
Replies: 2
by bobster1 » Fri Sep 29, 2023 10:56 am

First post

Authentic Original Bermuda Bell in great shape, dings as it should! $225 with free delivery to Hershey, RED Field RWI 18-20 or shipped at cost.

Last post

thanks for the interest, the bell was sold at Hershey.

2 Replies

974 Views

Last post by bobster1
Sun Oct 08, 2023 5:28 am
WTB: RaJo intake manifold

Last post by Mark Chaffin « Sat Oct 07, 2023 10:56 pm
Replies: 5
by Mark Anderson » Sat Oct 07, 2023 10:43 am

First post

Looking for a Intake Manifold for a #35 RaJo Head. Chaffins are currently out of them.

Last post

That one is in excellent overall condition. Usually they are cracked right down the center.

5 Replies

927 Views

Last post by Mark Chaffin
Sat Oct 07, 2023 10:56 pm
WTB - 25 drivers side rear fender

Last post by Gen3AntiqueAuto « Sat Oct 07, 2023 8:09 pm
Replies: 2
by Gen3AntiqueAuto » Mon Oct 02, 2023 9:39 am

First post

Helping a friend - he's looking for a 1925 left rear sedan fender.

Last post

I believe he's still looking for one.

2 Replies

361 Views

Last post by Gen3AntiqueAuto
Sat Oct 07, 2023 8:09 pm
WTB. Rebuilt short block..

Last post by Gen3AntiqueAuto « Sat Oct 07, 2023 8:07 pm
Replies: 3
by ModelT1909 » Fri Oct 06, 2023 12:34 pm

First post

No luck at Hershey.. looking to buy a rebuilt T short block . Or one that they know to be in excellent condition.. year doesn't matter... 14 to 27.. Thank You.. my email is modelt09@maine.rr.com or builder1@maine.rr.com.

Last post

I have a 27 here all done - you should have swung in on your way past me!

No luck at Hershey.. looking to buy a rebuilt T short block . Or one that they know to be in excellent condition.. year doesn't matter... 14 to 27.. Thank You.. my email is modelt09@maine.rr.com or builder1@maine.rr.com.

3 Replies

782 Views

Last post by Gen3AntiqueAuto
Sat Oct 07, 2023 8:07 pm
15 coil box lids fs. Sold

Last post by JTT3 « Sat Oct 07, 2023 6:02 pm
Replies: 1
by CTLeonard » Sat Oct 07, 2023 9:11 am

First post

Got a pair of later 15 coil box lids. One is kind of beat up with a hole drilled in it, the other is straight but has pitting. Along the front lip you can see daylight, and is missing a latch. Get both for 25.00 plus shipping. ctleonard64@gmail.com 1696684181173139756149780334087.jpg 16966841996582494064761143355412.jpg...

Last post

Message sent, sold!

1 Replies

434 Views

Last post by JTT3
Sat Oct 07, 2023 6:02 pm
WTB Buffalo wrench

Last post by RajoRacer « Sat Oct 07, 2023 3:31 pm
Replies: 1
by mklooksup » Sat Oct 07, 2023 2:33 pm

First post

I would like to buy a Buffalo wheel wrench, I know they are hard to find but I'm
giving it a shot.

Thanks

Manny

Last post

Kevin Pharis manufacturers new ones - piece of art !!!

1 Replies

389 Views

Last post by RajoRacer
Sat Oct 07, 2023 3:31 pm
WTB early Champion X plugs

Last post by havnfun « Sat Oct 07, 2023 11:09 am
Replies: 8
by havnfun » Tue Sep 26, 2023 11:34 pm

First post

Howdy,

I’m looking for some early champion X plugs

Last post

Mark, 1912 and a 1913

8 Replies

1180 Views

Last post by havnfun
Sat Oct 07, 2023 11:09 am
FS Hand Klaxon Ahooga Horn (SOLD pending)

Last post by ThreePedalTapDancer « Sat Oct 07, 2023 11:07 am
Replies: 4
by ThreePedalTapDancer » Fri Sep 15, 2023 5:32 pm

First post

Very nice original restored brass and black “Hand Klaxonet” ahooga horn. Nice paint and brass. Internals intact and operating as designed. Works great, very clean and loud. 300 includes shipping US.

IMG_8926.jpeg

Last post

Great looking horn

4 Replies

787 Views

Last post by ThreePedalTapDancer
Sat Oct 07, 2023 11:07 am
re-babbitted connecting rod ( singles)

Last post by Gene_French « Sat Oct 07, 2023 10:45 am
Replies: 6
by Gene_French » Tue Jul 18, 2023 10:27 am

First post

I have several re-babbitted connecting rods that are separate from sets ... this can be very handy for instances where you are on tour and loose a connecting rod ... a spare rod can save the event ! I have 2 Standard diameter rods ... 1 -.010 diameter rod ... 2 -.020 diameter rods ,and 1 -.030 diameter rod ...rods are re-babbitted , X grooved ,...

Last post

Allan:
sent an email to the address you sent me ...have a servicable rod here ... pay postage to Au. and it's yours ...Gene French

6 Replies

1018 Views

Last post by Gene_French
Sat Oct 07, 2023 10:45 am
Fender eye bolts fs. Sold

Last post by CTLeonard « Sat Oct 07, 2023 10:04 am

by CTLeonard » Sat Oct 07, 2023 10:04 am

Four fender eye bolts fs. 30.00 plus shipping. ctleonard64@gmail.com

0 Replies

295 Views

Last post by CTLeonard
Sat Oct 07, 2023 10:04 am
Straight spindle arm fs

Last post by CTLeonard « Sat Oct 07, 2023 10:01 am

by CTLeonard » Sat Oct 07, 2023 10:01 am

Have a t-270 spindle arm with good threads. 40.00 plus shipping. ctleonard64@gmail.com 16966872122381575089619692325904.jpg 16966872295764341670855755704459.jpg 16966872500071996448034468627658.jpg

0 Replies

322 Views

Last post by CTLeonard
Sat Oct 07, 2023 10:01 am
FS Brass Radiator

Last post by buff6345 « Sat Oct 07, 2023 9:31 am
Replies: 1
by YellowTRacer » Sat Oct 07, 2023 2:39 am

First post

Not sure who made this but I assume the Brassworks. Was on a car for a short time several years ago and has been in storage ever since. $850.00

Ed aka #4

Last post

sent email

1 Replies

634 Views

Last post by buff6345
Sat Oct 07, 2023 9:31 am
WTB Ruckstell left hand shift linkage

Last post by Woody23 « Sat Oct 07, 2023 8:41 am

by Woody23 » Sat Oct 07, 2023 8:41 am

Hello, I have a Ruckstell rear wind but missing all the linkage. So looking for all the parts to connect it, I prefer the left hand shift.

Thanks

David
Williamston, Mi

0 Replies

425 Views

Last post by Woody23
Sat Oct 07, 2023 8:41 am
WTB Seat Cover Hinges

Last post by adam13 « Fri Oct 06, 2023 10:37 pm

by adam13 » Fri Oct 06, 2023 10:37 pm

Want to buy 3 seat cover hinges like the one pictured. Please email at ajeyre13@icloud.com.

0 Replies

324 Views

Last post by adam13
Fri Oct 06, 2023 10:37 pm
What are these?

Last post by rwephill « Fri Oct 06, 2023 7:05 pm
Replies: 3
by rwephill » Fri Oct 06, 2023 10:42 am

First post

I am gradually working my way to restoring a '25 TT C-Cab from parts. This forum and the knowledge of the members has been critical in me figuring out what things are and how they fit together. In all of my parts I found these. Can anyone tell me what they are or if they are even part of this vehicle? There is definitely one for left and one for...

Last post

Thanks Stephen. I would have never gotten that on my own. I appreciate the description and the picture.

3 Replies

980 Views

Last post by rwephill
Fri Oct 06, 2023 7:05 pm
Accessory Do-Ray Cuckoo Dash Horn (SOLD pending)

Last post by ThreePedalTapDancer « Fri Oct 06, 2023 5:10 pm
Replies: 1
by ThreePedalTapDancer » Fri Oct 06, 2023 5:08 pm

First post

Here is an original very rare early Doray Cuckoo Horn. It was made by the Do-Ray Lamp Company, which is interesting because they were known for safety lights and reflectors. This model is early, with a pat pending stamp. It has a removable mounting bracket. Later versions had a fixed mounting bracket. It was designed to mount to the outside of the...

Last post

IMG_9065.jpeg

1 Replies

533 Views

Last post by ThreePedalTapDancer
Fri Oct 06, 2023 5:10 pm
Brass Steering Wheel (SOLD)

Last post by Fire_chief « Fri Oct 06, 2023 2:40 pm
Replies: 1
by ThreePedalTapDancer » Fri Oct 06, 2023 2:13 pm

First post

Cast polished brass steering wheel. 15 inches diameter. Nice condition and polish. Has some minor pitting and blems on the bottom side, top near perfect. Wood is very nice no damage or separation. Ready to mount and use. These are not being reproduced anymore. 425 includes shipping US.

IMG_9046.jpeg

Last post

Sent email

1 Replies

525 Views

Last post by Fire_chief
Fri Oct 06, 2023 2:40 pm
SOLD!!!!

Last post by GGZ « Fri Oct 06, 2023 10:19 am
Replies: 10
by GGZ » Wed Jun 21, 2023 12:14 pm

First post

SOLD!!!!!!!!

Last post

SOLD!!!!!!!!!

10 Replies

2335 Views

Last post by GGZ
Fri Oct 06, 2023 10:19 am
FS 1925 GE Refridgerator

Last post by Henry K. Lee « Fri Oct 06, 2023 7:40 am
Replies: 3
by Henry K. Lee » Mon Sep 11, 2023 4:46 pm

First post

Perfect for your Model T Bedroom, Fully restored and works really well. $1,200.00. Email if interested.

Hank

IMG_0393.jpeg

IMG_0392.jpeg

IMG_0390.jpeg

IMG_0389.jpeg

IMG_0388.jpeg

Last post

New price...., $1,000.00.

Hank

3 Replies

1442 Views

Last post by Henry K. Lee
Fri Oct 06, 2023 7:40 am
Voltage Regulators - I Need To Buy: OLD Cutouts!

Last post by Allan « Fri Oct 06, 2023 7:13 am
Replies: 40
by AdminJeff » Thu Aug 10, 2023 9:16 pm

First post

Im looking to buy/trade for old cutouts. I'm building diode cutouts and Model T & Model A voltage regulators and I have the bases I'm currently manufacturing, but the cans I'm thinking of ordering have an 8-10 week lead time from manufacturing .

The specific cutouts/tops I'm looking for are these - they have the rectangular notches in the base....

Last post

The model T cut outs with which I am familiar have the two terminals on the flat. Any cutout with an output screw on the side is likely for a model A or something later. That said, on the Ebay listing, only the two on the lower left of the offering are T model items.

Hope this focuses attention.
Allan from down under.

40 Replies

6656 Views

Last post by Allan
Fri Oct 06, 2023 7:13 am
FS Winfield 5v Carburetor (SOLD)

Last post by Kevin Pharis « Thu Oct 05, 2023 10:46 pm
Replies: 6
by ThreePedalTapDancer » Tue Jul 25, 2023 7:21 pm

First post

Here is a nice original Winfield 5V, aluminum bodied updraft racing carburetor. It is complete with nice barrel float. Everything moves as it should and is very clean. Perfect for an era correct speedster or dirt track racer. 1-3/8 flange opening. Impossible to find, very rare. Perfect to restore to operating condition and use. 550 includes...

Last post

Thanks for throwing my hat in the ring Ed. I do not inventory any parts for the H/V series carbs. But, I have made several parts before and always catalog the designs as I go. The fuel strainer bowl has yet to make the list, but have made throttle barrels and float seats before. Happy to share these if someone needs…

6 Replies

1566 Views

Last post by Kevin Pharis
Thu Oct 05, 2023 10:46 pm
WTB Door for a John Brown 115 Taillight

Last post by DontKnowMuch « Thu Oct 05, 2023 10:27 pm
Replies: 1
by DontKnowMuch » Tue Oct 03, 2023 2:02 pm

First post

I would like to buy a red lens and door for a John Brown 115 taillight. This has a red, round lens like the one below. 1914 Brown Taillight (2).jpg
Please let me know if you have one. Thanks
Dennis

Last post

Still Looking.

1 Replies

537 Views

Last post by DontKnowMuch
Thu Oct 05, 2023 10:27 pm
FS EARLY FORD COIL BOX SWITCH (18-22)

Last post by skyhunter « Thu Oct 05, 2023 10:07 pm
Replies: 3
by Mark Chaffin » Wed Sep 13, 2023 6:45 pm

First post

Very nice early Ford script coil box switch (18-22). Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

sWITCH 1.jpg

Switch 2.jpg

Last post

Does anyone carry just the plain switch plate? The 4730 look too pretty.

3 Replies

759 Views

Last post by skyhunter
Thu Oct 05, 2023 10:07 pm
Hershey Close Out Deals Last Day

Last post by Dan Hatch « Thu Oct 05, 2023 6:29 pm
Replies: 2
by Dan Hatch » Thu Oct 05, 2023 4:49 am

First post

Last day specials
26/27 Wire Wheels $50 each and up
30x3 rims $30 each
NOS 23/25 Sedan Rear Fenders $30 each
Aluminum Hogs heads $50 each
13/14 Rear End Housings $45 each

Spaces CR33/38, Lightpole 68

Get there early or lose out

Last post

Sorry no can do

2 Replies

800 Views

Last post by Dan Hatch
Thu Oct 05, 2023 6:29 pm
WTB 1912 Fore-Door Brackets

Last post by rnwilliams « Thu Oct 05, 2023 11:18 am

by rnwilliams » Thu Oct 05, 2023 11:18 am

I need a pair of the fore-door brackets that fasten the fore-doors to the firewall at the top in a 1912 touring.
Ricky Williams, text or call (731)618-0207, email to rwilliams@humboldtministorage.com or PM

0 Replies

380 Views

Last post by rnwilliams
Thu Oct 05, 2023 11:18 am
REBUILT 1927 Short Block FS

Last post by Gen3AntiqueAuto « Thu Oct 05, 2023 9:50 am
Replies: 9
by Gen3AntiqueAuto » Wed Aug 24, 2022 4:18 pm

First post

I have a rebuilt 1927 T short block here for sale. It has a 290 cam and adjustable lifters. Professionally rebuilt and then re-built again the right way by me after it arrived here in a show car with an oil pan full of coolant and less than 10 minutes of run time.

Not sure how to stick a video in here so here's the link showing the engine that is...

Last post

I still have this here and it needs a new home!

9 Replies

2702 Views

Last post by Gen3AntiqueAuto
Thu Oct 05, 2023 9:50 am
WTB Header plate

Last post by TRDxB2 « Wed Oct 04, 2023 8:49 pm
Replies: 5
by Mark Anderson » Tue Oct 03, 2023 5:20 pm

First post

Is anyone making header plates anymore. Does someone have dimensions for one? Thanks..

Last post

Is anyone making header plates anymore. Does someone have dimensions for one? Thanks..

Chaffin's Garage was making them

5 Replies

1034 Views

Last post by TRDxB2
Wed Oct 04, 2023 8:49 pm
FOR SALE Original 26=7 hood

Last post by Bodyman.315 « Wed Oct 04, 2023 8:20 pm
Replies: 1
by Burlingtontguy » Tue Oct 03, 2023 6:26 pm

First post

I have a 26-7 original Model T hood, Faded red paint, no rust out , light sand blast, prime and paint, We all know original T-Stuff lines up the best
$375 O B O plus shipping, e=mail or call me at 401-932-3191, Thanks ,, Dennis

Last post

Hi Dennis this Eric I bought the engine blocks from you.Could you text me some pics of the hood thanks.

1 Replies

516 Views

Last post by Bodyman.315
Wed Oct 04, 2023 8:20 pm
21” wheels and Tires at Hershey on sale Thursday

Last post by Dan Hatch « Wed Oct 04, 2023 6:43 pm
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:22 pm

First post

Got a set of wood and wire wheels with tires at Hershey. Also some wire wheel hubs, front and rear. Spaces CR 33-38
Light pole 68. Thanks

Last post

Wire wheels are going on SALE tomorrow at 9:00.
Be there or be SQUARE

2 Replies

600 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:43 pm
brake light, side lights and other parts.

Last post by TRDxB2 « Wed Oct 04, 2023 12:57 pm
Replies: 10
by skyhunter » Thu Sep 28, 2023 12:18 pm

First post

I am in PA now so nothing to sell. But I did score some stuff I really needed.

Last post

My friend at Hershey says you haven't contacted him to deliver the Tank straps & bases. I emailed you his location. Sending you a PM with that info

10 Replies

2110 Views

Last post by TRDxB2
Wed Oct 04, 2023 12:57 pm
ISO ignition tumbler

Last post by Tim D « Wed Oct 04, 2023 9:49 am
Replies: 4
by Tim D » Tue Oct 03, 2023 4:42 pm

First post

Need a ignition tumbler with a key. repro is fine.
Thanks Tim

Last post

The suppliers are all out and they don't have a date for new ones yet.

4 Replies

893 Views

Last post by Tim D
Wed Oct 04, 2023 9:49 am
New in the box T hoods at Hershey

Last post by Mike Lebsack-Iowa « Wed Oct 04, 2023 8:08 am
Replies: 5
by Mike Lebsack-Iowa » Fri Sep 29, 2023 6:10 pm

First post

I have 5 new Model T hoods still in the original boxes. Save shipping cost. $410 each.
One each, 26/27, 23-25, 17-22, 15-16 aluminum, 13-14 aluminum. Text or call me at 319-fourthirty-49ninetyfive.
First come first serve. I have more but no room to haul. Thanks, Mike

Last post

I have one 23-25 hood and one 15-16 aluminum hood left at Hershey. These are new Rootlieb in original unopened boxes.
They currently list for $425 plus shipping in the catalogs. I am selling these for $410 and no shipping if you pick them up from me. I am on the Green Field space # GBL 26.
You can also text or call me at 319-4thirty- 49ninety...

5 Replies

1368 Views

Last post by Mike Lebsack-Iowa
Wed Oct 04, 2023 8:08 am
13/14/15 Hogs Heads at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:20 am

by Dan Hatch » Wed Oct 04, 2023 6:20 am

Still have a couple nice 13/14/15 Transmission covers.
SpatCr-33/38, Lightpole 68

0 Replies

296 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:20 am
Coilboxs at Hershey FS

Last post by Dan Hatch « Wed Oct 04, 2023 6:15 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 6:59 pm

First post

1914 Coilbox with Lid, 1915 Coilbox with Lid.
Spaces CR 33/38 Lightpole 68
Thanks

Last post

Back to the top

1 Replies

394 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:15 am
1914 Steering column at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:15 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:55 pm

First post

Pair of 1914 Steering columns at Hershey FS.
Spaces CR 33/38.
Also a 1915 column Lightpole 68
Thanks

Last post

Back to the top

2 Replies

476 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:15 am
1914 WT fenders FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:14 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:41 pm

First post

Nice pair of 1914 Wide Track front Fenders at Hershey. Spaces
CR 33-38. Lightpole 68 Come by and see. Thanks

Last post

Back to the top

2 Replies

477 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:14 am
1911 Brassworks Radiator at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:13 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:53 pm

First post

Nice 1911/12 Brass Radiator FS at Hershey. Spaces CR-33/38. Thanks

Last post

Back to the top

2 Replies

739 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:13 am
13/14 Axle Housings at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:58 am

by Dan Hatch » Wed Oct 04, 2023 4:58 am

13/14 rear Axle Housings cheap
CR-33/38, Lightpole 68

0 Replies

226 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:58 am
Small Drum Ruckstell at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:56 am

by Dan Hatch » Wed Oct 04, 2023 4:56 am

Small drum Ruckstell kit
Spaces Cr-33/38. Lightpole 68

0 Replies

397 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:56 am
Canadian Windshield FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:53 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 5:21 pm

First post

There is a nice 1920-22 Canadian Windshield at Hershey, spaces CR-33/38.
IMG_3165.jpeg

Last post

Leaving Thursday

1 Replies

262 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:53 am
30x3 wheels & rims at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:53 am
Replies: 1
by Dan Hatch » Tue Oct 03, 2023 5:43 am

First post

Got some good 30x3 wheels and rims at Hershey. Price is right.
Spaces CR-33/38. Lightpole 68. Thanks

Last post

Leaving Thursday

1 Replies

334 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:53 am
1911 New GasTank

Last post by Dan Hatch « Wed Oct 04, 2023 4:52 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 7:01 pm

First post

1911 New in the box at Hershey
Spaces CR 33/38 Lightpole 68
Thanks

Last post

Leaving Thursday better get this, not being made anymore.

1 Replies

471 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:52 am
14 Windshields at Hershey parting out

Last post by Dan Hatch « Wed Oct 04, 2023 4:51 am

by Dan Hatch » Wed Oct 04, 2023 4:51 am

Parting out 1914 Windshields at Hershey. Got 2 that will be parting .Old Frames, new frames, cross pieces, brass channels, braces.
CR-33/38. Lightpole 68
Leaving Thursday.

0 Replies

244 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:51 am
Roll of top material FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:46 am
Replies: 1
by Dan Hatch » Tue Oct 03, 2023 10:47 am

First post

Roll of top material at spaces CR-33/38, Lightpole 68.
Cheap

Last post

Sold Thanks

1 Replies

322 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:46 am
FS Stewart Model 103 Speedometer

Last post by JBog « Tue Oct 03, 2023 8:54 pm

by JBog » Tue Oct 03, 2023 8:54 pm

This is my eBay listing.

0 Replies

432 Views

Last post by JBog
Tue Oct 03, 2023 8:54 pm
WTB Rear Seat Frame Lid for 1917-1918 Touring Rear Seat

Last post by adam13 « Tue Oct 03, 2023 4:25 pm

by adam13 » Tue Oct 03, 2023 4:25 pm

Wtb one rear seat frame lid for a 17 -18 touring rear seat compartment. This is the panel under the seat cushion that is hinged. This is for a 17-18 touring that is being restored with 100% of its ford sheetmetal.

0 Replies

282 Views

Last post by adam13
Tue Oct 03, 2023 4:25 pm
M<isc parts

Last post by 23ford « Tue Oct 03, 2023 4:04 pm
Replies: 6
by 23ford » Mon Oct 02, 2023 1:37 pm

First post

Misc for sale wite truck pressure gage $50 1925 floorboard risers $30. Fram suction gum $40 Cast iron brake shoes $30 all plus ride pr free pickup tulsa,,,,,,,call nine one 8 6nine 3 five 2 sx 7

Last post

thank you for adding the pictures

6 Replies

960 Views

Last post by 23ford
Tue Oct 03, 2023 4:04 pm
Wanted: Side and tail lights

Last post by Philip Lawrence « Tue Oct 03, 2023 1:02 pm
Replies: 3
by Philip Lawrence » Sun Oct 01, 2023 11:36 pm

First post

I'm looking for a nice set of side lights and also a nice tail light for a 1916. These would have steel rims and have the small vent holes around the base of the chimney. The reflector inside is round unlike the later lights that have a more square shaped reflector.

Last post

Allen, Thank you for your comment. I wish the kerosene lamps here had reflectors made of brass, U.S. production used steel reflectors. It's hard to find them without heavy rust and pitting these days. I think the square type reflectors came along about 1919 in the U.S. The reflectors I believe were zinc plated.

3 Replies

634 Views

Last post by Philip Lawrence
Tue Oct 03, 2023 1:02 pm
15-22 roadster touring windshield frame fs. Sold

Last post by CTLeonard « Tue Oct 03, 2023 9:29 am

by CTLeonard » Tue Oct 03, 2023 9:29 am

A nice straight dent free frame. Missing one glass clamp and the upper glass channel. Folds nicely, no rust issues. Good original, 185.00 plus shipping. Have stanchions if needed ctleonard64@gmail.com 16963396347223013115316245675895.jpg 16963396118782579947064181730653.jpg 169633958332413963949363943119.jpg

0 Replies

322 Views

Last post by CTLeonard
Tue Oct 03, 2023 9:29 am
1923 coil box lid - FOUND.

Last post by Dan Hatch « Tue Oct 03, 2023 5:43 am
Replies: 3
by TheSaintDiscJockey » Mon Oct 02, 2023 9:39 am

First post

Looking to purchase a coil box cover for a 1923 box.
PM or text six zero nine 920 four 2 2 zero.
Many thanks!

Last post

Spaces CR -33/38

3 Replies

654 Views

Last post by Dan Hatch
Tue Oct 03, 2023 5:43 am
For Sale: Offset Spindles

Last post by Bruce Z « Mon Oct 02, 2023 9:11 pm
Replies: 2
by Bruce Z » Mon Oct 02, 2023 1:58 pm

First post

Pair of offset spindles that are Magne fluxed good. New king pin bushings that will have to be fitted to your front end. $300.00 plus $20 shipping Please contact me via email IMG_1006.JPG IMG_1005.JPG IMG_0616.JPG

Last post

sold pending payment

2 Replies

668 Views

Last post by Bruce Z
Mon Oct 02, 2023 9:11 pm
F/S Torpedo firewall bracket

Last post by Bruce Z « Mon Oct 02, 2023 9:10 pm
Replies: 2
by Bruce Z » Mon Oct 02, 2023 2:24 pm

First post

Repro firewall bracket for a torpedo roadster. $10.00 plus $12 shipping. Please contact me via email. IMG_1018.JPG IMG_0616.JPG

Last post

Sold pending payment

2 Replies

513 Views

Last post by Bruce Z
Mon Oct 02, 2023 9:10 pm
Passed date

Last post by mike catlin « Mon Oct 02, 2023 7:10 pm
Replies: 3
by skyhunter » Sun Oct 01, 2023 4:21 pm

First post

Safe travels home all.

This topic can be deleted.

Last post

Sent you a email

3 Replies

887 Views

Last post by mike catlin
Mon Oct 02, 2023 7:10 pm
Connecting Rod cores At Hershey

Last post by Dan Hatch « Mon Oct 02, 2023 6:19 pm

by Dan Hatch » Mon Oct 02, 2023 6:19 pm

Have a 5 gallon bucket full of good light connecting rod cores at Hershey. Spaces CR33/38. Come by and get some or all. Thanks

0 Replies

302 Views

Last post by Dan Hatch
Mon Oct 02, 2023 6:19 pm
F/S Repro wood for steering wheel

Last post by Bruce Z « Mon Oct 02, 2023 4:28 pm
Replies: 2
by Bruce Z » Mon Oct 02, 2023 2:18 pm

First post

Repro wood for steering wheel that measures outside 14 & 7/8 inches. $20.00 plus Shipping. Please contact me via email. IMG_1009.JPG IMG_0616.JPG

Last post

Sold to Ed, pending payment

2 Replies

488 Views

Last post by Bruce Z
Mon Oct 02, 2023 4:28 pm
Early axle wishbone, spring fs. Sold

Last post by Fire_chief « Mon Oct 02, 2023 3:46 pm
Replies: 1
by CTLeonard » Mon Oct 02, 2023 3:29 pm

First post

T202 DB front axle with spindles 7 leaf spring ,over axle wishbone. Located in mt.vernon Indiana. 400.00 and you pick up or arrange shipping. ctleonard64@gmail.com 16962748453037779511737166289908.jpg 16962748709583291446523099375913.jpg 16962748950966735206811185220670.jpg

Last post

E- mail sent

1 Replies

464 Views

Last post by Fire_chief
Mon Oct 02, 2023 3:46 pm
19 terminal block fs. Sold

Last post by Pep C Strebeck « Mon Oct 02, 2023 3:37 pm
Replies: 1
by CTLeonard » Mon Oct 02, 2023 11:25 am

First post

Never used in package. Says for early 19. 10.00 plus shipping. ctleonard64@gmail.com 16962602954733921107626946283444.jpg

Last post

E-mail sent about terminal block.

1 Replies

394 Views

Last post by Pep C Strebeck
Mon Oct 02, 2023 3:37 pm
Wood rim 18" FS

Last post by Nv Bob « Mon Oct 02, 2023 2:55 pm

by Nv Bob » Mon Oct 02, 2023 2:55 pm

New blonde oak with finger jointed prices
Measure 18 od and 15 id
Asking 150 plus postage

0 Replies

326 Views

Last post by Nv Bob
Mon Oct 02, 2023 2:55 pm
F/S Head Light Fork

Last post by Bruce Z « Mon Oct 02, 2023 2:32 pm

by Bruce Z » Mon Oct 02, 2023 2:32 pm

Left side head light fork, threads appear good. $40.00 Plus $20.00 shipping. Please contact me via email IMG_1021.JPG IMG_0616.JPG

0 Replies

326 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:32 pm
F/S Torpedo Door Latch

Last post by Bruce Z « Mon Oct 02, 2023 2:28 pm

by Bruce Z » Mon Oct 02, 2023 2:28 pm

Door Latch, I was told for a torpedo. $50. plus $12 shipping. Please contact me via email IMG_1017.JPG IMG_0616.JPG

0 Replies

272 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:28 pm
Emergency brake trim fs. Sold

Last post by CTLeonard « Mon Oct 02, 2023 2:24 pm

by CTLeonard » Mon Oct 02, 2023 2:24 pm

Heavy steel used on 09-15. 12.00 plus shipping. ctleonard64@gmail.com 16962710195542582373911819638720.jpg 16962710403926568432602361341504.jpg

0 Replies

270 Views

Last post by CTLeonard
Mon Oct 02, 2023 2:24 pm
For Sale Wood Steering Wheel

Last post by Bruce Z « Mon Oct 02, 2023 2:14 pm

by Bruce Z » Mon Oct 02, 2023 2:14 pm

Original wood steering wheel with cast steel center. Outside measurement is 15 & 1/4 inches. $50.00 plus $30.00 shipping. Please contact me via email. IMG_1008.JPG IMG_0616.JPG

0 Replies

373 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:14 pm
F/S Early Rear End Spool

Last post by Bruce Z « Mon Oct 02, 2023 2:09 pm

by Bruce Z » Mon Oct 02, 2023 2:09 pm

Early rear end spool that has been converted to use limpkin bearings. $50.00 plus $20 shipping. Please contact via email IMG_1011.JPG IMG_1012.JPG IMG_0616.JPG

0 Replies

354 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:09 pm
For Sale Front Motor Mount

Last post by Bruce Z « Mon Oct 02, 2023 2:06 pm

by Bruce Z » Mon Oct 02, 2023 2:06 pm

Early front motor mount. Threads appear good. $60.00 plus $20 shipping. Please contact me via email, IMG_1010.JPG IMG_0616.JPG

0 Replies

294 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:06 pm
Buffalo Hub

Last post by Bruce Z « Mon Oct 02, 2023 2:02 pm

by Bruce Z » Mon Oct 02, 2023 2:02 pm

Right front Buffalo hub, has good threads missing bearing cones. $200.00 Plus $20 shipping. Please contact me via email IMG_1000.JPG IMG_1001.JPG IMG_0616.JPG

0 Replies

328 Views

Last post by Bruce Z
Mon Oct 02, 2023 2:02 pm
09-11 brass hood hooks fs. Sold

Last post by CTLeonard « Mon Oct 02, 2023 11:10 am

by CTLeonard » Mon Oct 02, 2023 11:10 am

I only have the three. 18.50 plus shipping. ctleonard64@gmail.com 1696259377292937674116800083539.jpg 1696259377292937674116800083539.jpg

0 Replies

277 Views

Last post by CTLeonard
Mon Oct 02, 2023 11:10 am
Corner brackets for sale

Last post by CTLeonard « Mon Oct 02, 2023 11:03 am

by CTLeonard » Mon Oct 02, 2023 11:03 am

5.00 each. ctleonard64@gmail.com 16962589671474403110786104722834.jpg

0 Replies

304 Views

Last post by CTLeonard
Mon Oct 02, 2023 11:03 am
Fender eye bolts fs. Sold

Last post by CTLeonard « Mon Oct 02, 2023 10:55 am

by CTLeonard » Mon Oct 02, 2023 10:55 am

Still very usable.15.00 for all plus shipping. ctleonard64@gmail.com 1696258483901977073866613643692.jpg 1696258483901977073866613643692.jpg

0 Replies

257 Views

Last post by CTLeonard
Mon Oct 02, 2023 10:55 am
FOR SALE New 26-7 Rootlieb hood SOLD

Last post by Burlingtontguy « Sun Oct 01, 2023 11:03 pm

by Burlingtontguy » Sun Oct 01, 2023 11:03 pm

I have a new 26-7 Rootlieb model t hood for sale $325 plus shipping. Has been prepped and in PPG epoxy, E-mail or Call me with questions or to purchase. Thanks, Dennis 401-932-3191 SOLD pending payment

0 Replies

405 Views

Last post by Burlingtontguy
Sun Oct 01, 2023 11:03 pm
09-25 Kevlar bands FS

Last post by Nv Bob « Sun Oct 01, 2023 6:27 pm

by Nv Bob » Sun Oct 01, 2023 6:27 pm

New set Kevlar bands $155 shipped to your door in lower 48
Bob
Jalopyt@yahoo.com

0 Replies

453 Views

Last post by Nv Bob
Sun Oct 01, 2023 6:27 pm
Stationary engine pulley

Last post by jawa « Sun Oct 01, 2023 12:28 pm
Replies: 3
by jawa » Thu Feb 09, 2023 2:51 pm

First post

Large stationary Model T engine pulley. 8 3/4 wide x 12 diameter. $225.

Last post

I can bring this to Hershey if you contact me. I also have a Tachometer, copper cooling tank, flyball governor for a stationary set up.

3 Replies

1697 Views

Last post by jawa
Sun Oct 01, 2023 12:28 pm
Dial indicator toolset for linebore

Last post by Gene_French « Sun Oct 01, 2023 11:29 am
Replies: 4
by Gene_French » Sun Jan 08, 2023 10:22 am

First post

dial indicator toolset for my design and other linebore fixtures ... indicator zero's on your boring bar ... indicator unit reads the offset of the boring bit to make toolsetting simple and accurate ...available for 1 or 1 1/4 boring bars ( specify ) ...instructions are included ... price is $95 plus $16.50 priority mail postage in lower 48 states...

Last post

to the top again ...thanks MTFCA

4 Replies

1699 Views

Last post by Gene_French
Sun Oct 01, 2023 11:29 am
09-11 parts, hubs, fender irons, headlight forks

Last post by Mark Wing - NM « Sat Sep 30, 2023 11:27 pm
Replies: 1
by Larry Debaugh » Fri Sep 29, 2023 6:45 pm

First post

Pair rear wheel hubs 09-10 , one flange $500 pair, front fender irons $220 per pair, 09-10 headlight forks $220 per pair, 11- headlight forks $175 pair…. All plus postage, will be at Hershey CM 32-36+ Larry Debaugh 4103361728

Last post

Hello Larry,

I sent you a private message regarding your 09-10 fender irons and headlight forks.

Thank you,
Mark Wing
Tin Lizzies of Albuquerque

1 Replies

765 Views

Last post by Mark Wing - NM
Sat Sep 30, 2023 11:27 pm
Speedometers, gas tanks etc. at Hershey

Last post by DontKnowMuch « Sat Sep 30, 2023 8:05 pm
Replies: 1
by Steve Davis » Sat Sep 30, 2023 7:18 pm

First post

Speedometers, swivels, wheel gears, gas tanks, new rims, top straps, much more. Hershey spaces GDF 21-23, near light pole 84. Will be open early Tuesday morning. Hope to see you there!

Last post

I am looking for a swivel for a Stewart 490 speedometer. Please let me know if you have one.
Dennis
214-529-0478

1 Replies

577 Views

Last post by DontKnowMuch
Sat Sep 30, 2023 8:05 pm
Hogs Heads at HERSHEY - Aluminum and Iron

Last post by Retro54 « Sat Sep 30, 2023 7:33 pm
Replies: 1
by Retro54 » Sat Sep 30, 2023 7:33 pm

First post

For inspection and purchase at Hershey AACA Fall Meet ONLY. No holds, first cash first served. Spaces CG-74-77 in the Chocolate field. We will be set up to sell Tuesday thru Thursday (Maybe Friday)

Aluminum Hogs Heads. $50 a piece. One 12/13 available and four 13/15's available.

Also have a bunch of cast iron hogs heads. Most have starter hole,...

Last post

Here is a photo of the rest of the cast iron ones.

1 Replies

651 Views

Last post by Retro54
Sat Sep 30, 2023 7:33 pm
WTB rear wheel puller

Last post by Jeff Perkins « Sat Sep 30, 2023 2:29 pm
Replies: 1
by JBog » Thu Sep 28, 2023 12:00 am

First post

Looking to buy a rear wheel puller for my 1919 touring. Might also be interested in a rear outer bearing sleeve puller too.

Last post

I have a nice one. PM sent.

1 Replies

589 Views

Last post by Jeff Perkins
Sat Sep 30, 2023 2:29 pm
Rands and Automatic windshield name plate

Last post by Larry Debaugh « Sat Sep 30, 2023 1:17 pm

by Larry Debaugh » Sat Sep 30, 2023 1:17 pm

Me name plates for Rands and Automatic windshields $22 ea postage included USA outside US extra, will bring some to Hershey CM32-36+ Larry Debaugh 4103361728

0 Replies

454 Views

Last post by Larry Debaugh
Sat Sep 30, 2023 1:17 pm
shopping list at Hershey

Last post by pkhammer « Sat Sep 30, 2023 1:11 pm
Replies: 1
by andrew o sullivan » Sat Sep 30, 2023 10:38 am

First post

hi there shopping list at Hershey,, looking for..... rear bottom leather seat upholstery for 1910 . 1910 crank handle , all white used tire 30/3 , front 1914 brass and black lights with forks, brass mirror that fits to the brass windshield on the side 1910 to1912, Rear axle truss supports for early rear axles a full set . one front axle radius rod...

Last post

I will have a set of 1914 lights but no forks. Also have the cowl lamps and tail lamp. C4Y 1-4.

1 Replies

544 Views

Last post by pkhammer
Sat Sep 30, 2023 1:11 pm
FS VINTAGE EVENT DASH PLAQUES (SOLD)

Last post by Mark Chaffin « Sat Sep 30, 2023 12:56 am
Replies: 3
by Mark Chaffin » Fri Sep 15, 2023 11:38 am

First post

Vintage automotive event metal dash plaques from the 60's and 70's. Get the entire lot (31 pieces) for $30 with free domestic shipping. Mark Chaffin (951) 805-0928.

20230915_083349.jpg

Last post

Sold to Rich. Thank you MTFCA!

3 Replies

678 Views

Last post by Mark Chaffin
Sat Sep 30, 2023 12:56 am
What the heck is this?

Last post by Robert Kiefaber « Fri Sep 29, 2023 7:07 pm
Replies: 7
by Michael Paul » Thu Sep 28, 2023 8:22 pm

First post

I found this in a pile of model t parts, I know it's not model t, but can't figure it out. Any help appreciated.
Mike IMG_20230928_171428840_copy_1209x1612_1.jpg IMG_20230928_171444407.jpg

Last post

IMG_1293.jpeg
I collect Edison Kinetoscopes and it is used for carbon arc lighting. I have one just like it.

7 Replies

1764 Views

Last post by Robert Kiefaber
Fri Sep 29, 2023 7:07 pm
09/10 Roadster or Tourabout seat cushions

Last post by Larry Debaugh « Fri Sep 29, 2023 2:50 pm
Replies: 3
by Larry Debaugh » Mon Sep 25, 2023 12:02 pm

First post

New leather seat cushions 2 for Roadster, 4 for Tourabout, correct pattern $250 each plus postage, you can’t buy the leather for that…. Can bring to Hershey CM32-36 Larry Debaugh 4103361728

Last post

Seat cushions sold… thanks

3 Replies

978 Views

Last post by Larry Debaugh
Fri Sep 29, 2023 2:50 pm

New Topic

9271 topics

Page 59 of 93
- Jump to page:
Previous
1
…
57
58
59
60
61
…
93
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum