Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 82008 Views
-
Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm
-
-
FS Heinze switch
Replies: 1
by
Bjerm » Thu Nov 02, 2023 2:36 pm
First post
New Heinze switch $200 obo plus shipping best way to reach me is by email bjerm10@gmail.com
Last post
Back to the top new price
- 1 Replies
- 667 Views
-
Last post by Bjerm
Sun Nov 05, 2023 3:52 pm
-
-
FS 3 original copies of the Model T Service book
Replies: 9
by
KimDobbins » Sat Nov 04, 2023 3:41 pm
First post
3 hard cover 1925-26 original copies of the Ford service books. These are pretty rare in original hard cover. All are in nice condition. $85.00 each plus $10 shipping. Kdmks AT att.net.
Last post
I even have an old original that is real used, that I use in the garage.
- 9 Replies
- 1839 Views
-
Last post by Original Smith
Sun Nov 05, 2023 1:58 pm
-
-
FS: Solid State Diode Cutouts
by AdminJeff » Sun Nov 05, 2023 12:35 pm
I just sourced another good sized batch of cutout tops, so I can now produce solid state, Diode Cutouts in addition to Voltage Regulators. These are high quality, 60 Amp diode based cutouts (the other vendors mostly use 30A diodes) and they are a direct replacement for your mechanical cutout. They are identical to the original Ford cutouts and...
- 0 Replies
- 836 Views
-
Last post by AdminJeff
Sun Nov 05, 2023 12:35 pm
-
-
Holley NH swivel top carburetor/Sold
Replies: 1
by
Corey Walker » Tue Oct 31, 2023 8:09 pm
First post
Completely disassembled and cleaned, passages sealed with set screws, new choke spring, spray nozzle, viton tipped needle and seat, reconditioned spray needle, tested float. This is the regular size float making this is a 1925 since it has the clip type throttle and choke plates but not the taller float used with the 1926 cowl tank. $245 postpaid...
Last post
Back to top.
- 1 Replies
- 794 Views
-
Last post by Corey Walker
Sat Nov 04, 2023 6:24 pm
-
-
F.S. NOS 1909-1925 Rear Spring Perches * SALE*
Replies: 4
by
Stephen1915 » Sat Oct 28, 2023 6:28 pm
First post
Pair of two NOS rear spring perches, with the later style manhole oilers. These are GENUINE FORD and are NOS.
Same price as new ones but these are made by FORD and are forged steel not cast steel as the new ones are.
$80 + Flat Rate Shipping
314-287-1901
Last post
Message sent about the perches.
- 4 Replies
- 1025 Views
-
Last post by Pep C Strebeck
Sat Nov 04, 2023 3:01 pm
-
-
Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
by
modeltbarn » Wed Nov 01, 2023 3:01 pm
First post
Reverse pedal extension, $20
NOS crank ratchet $15
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Last post
The pulley is spoken for
- 9 Replies
- 1840 Views
-
Last post by modeltbarn
Sat Nov 04, 2023 2:58 pm
-
-
- 0 Replies
- 485 Views
-
Last post by Rod
Sat Nov 04, 2023 2:04 pm
-
-
F.S. NOS FRONT SHACKLE BARS
Replies: 1
by
Stephen1915 » Mon Oct 30, 2023 3:38 am
First post
$10 ea. + Flat Rate Envelope.
All have the Familiar Ford Script
314-287-1901
Last post
Still available!
- 1 Replies
- 545 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:40 am
-
-
F.S. NOS Early Fan Arms *SALE*
Replies: 2
by
Stephen1915 » Sat Oct 28, 2023 6:35 pm
First post
NOS Fan Arms for the Pre 1917 Cars. But after the Spring Nub style.
$12 ea. + Flat Rate Envelope
314-287-1901
Last post
Still have them for sale!
- 2 Replies
- 631 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:39 am
-
-
F.S. NOS Later Fan Arms *SALE*
Replies: 2
by
Stephen1915 » Sat Oct 28, 2023 6:37 pm
First post
Later 1917-1926 Style Fan Arms. NOS.
$10 ea. + Flat Rate Envelope
314-287-1901
Last post
Still have them available!
- 2 Replies
- 536 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:39 am
-
-
F.S. NOS TIE ROD ENDS. * SALE*
Replies: 2
by
Stephen1915 » Sat Oct 28, 2023 4:55 pm
First post
I have 7 NOS tie rod end yolks. 6 are the later taper shank ball type and the one sitting alone on the left is the earlier straight shank type.
All have the FORD script and all are NOS.
Not slightly used, NOS.
I haven’t cleaned them, so they have 90+ years of dirty on them.
$25 each.+ flat rate envelope
314-287-1901
Last post
2 sold, plenty left!
- 2 Replies
- 697 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:38 am
-
-
F.S. NOS CAMSHAFT FRONT BEARINGS
Replies: 3
by
Stephen1915 » Sat Oct 28, 2023 6:43 pm
First post
I have a few of these, and wonder if there is any interest in them.
These are for the Earlier pre ‘24 style camshaft. These are unused and unsplit. Genuine FORD NOS. Well over $100 in the catalog
$100 ea. + Shipping.
314-287-1901
Last post
To the top
- 3 Replies
- 801 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:38 am
-
-
F.S. NOS FRONT OUTER WHEEL BEARINGS
Replies: 4
by
Stephen1915 » Mon Oct 30, 2023 3:32 am
First post
Pair of L & R Nos BOWER wheel bearings. A good high quality brand bearing that was an original supplier for Ford.
$100 Pair + Flat Rate
314-287-1901
Last post
Still available!
- 4 Replies
- 1150 Views
-
Last post by Stephen1915
Sat Nov 04, 2023 10:37 am
-
-
For Sale: Wire Wheel Lug Nuts
Replies: 1
by
Ed Fuller » Fri Nov 03, 2023 8:24 pm
First post
I dug up another set of 20 wire wheel lug nuts. Some of them have some pitting but they all threaded onto studs just fine.
$40 plus $10 shipping in the U.S
IMG_2740.jpeg
IMG_2742.jpeg
IMG_2738.jpeg
IMG_2741.jpeg
Last post
I would like to purchase these.
I would prefer to send a check, and you can send them after it clears, if that works for you
Scott
- 1 Replies
- 488 Views
-
Last post by South Park Zephyr
Fri Nov 03, 2023 9:56 pm
-
-
WTB Shackles FOUND!
by
Art Ebeling » Fri Nov 03, 2023 8:24 pm
Cancel WTB one front and one rear figure eight shackle for a 1914 in good condition. Thanks, Art
- 0 Replies
- 445 Views
-
Last post by Art Ebeling
Fri Nov 03, 2023 8:24 pm
-
-
WTB Black 1916 lamp trim
Replies: 2
by
Belliott3 » Fri Nov 03, 2023 4:08 pm
First post
I’m looking for black tops and doors for the 1916 model t side lamps as well as black headlight rims. The bodies of my side lamps are fine, I’d like to swap out the incorrect parts for black parts but if I have to buy the entire side lamps so be it.
Last post
Email sent
- 2 Replies
- 488 Views
-
Last post by Belliott3
Fri Nov 03, 2023 8:16 pm
-
-
- 0 Replies
- 474 Views
-
Last post by Art Ebeling
Fri Nov 03, 2023 5:32 pm
-
-
Brass e&j 1908 sidelights and taillight fs. Sold
Replies: 1
by
CTLeonard » Fri Nov 03, 2023 10:11 am
First post
Very presentable set of lights. Taillamp is very nice. Has been pushed down on and has gotten a lean to it. Once hanging it's not noticable. Hinge pin for door is missing has a wire in it. Jeweled sidelamps are also very presentable. One small dink in the top, one of them has been dented in the back. Both sidelamps have the wrong burners in them....
Last post
Email sent
I will take the lights if still available
Thanks Randy
- 1 Replies
- 496 Views
-
Last post by Randy Mock
Fri Nov 03, 2023 4:55 pm
-
-
Whippet radiator and shell fs. Sold
by
CTLeonard » Fri Nov 03, 2023 12:10 pm
Shell has been modified on bottom for mounting. Nothing destroyed. Still very straight solid shell. Radiator holds water with no visible leaks. Do have cap, just wasn't with me during pictures. 700.00 plus shipping. Radiator is heavy, pickup would be best. Located in mt.vernon Indiana. ctleonard64@gmail.com IMG_20231103_110007377.jpg...
- 0 Replies
- 475 Views
-
Last post by CTLeonard
Fri Nov 03, 2023 12:10 pm
-
-
Hood former fs. Sold
by
CTLeonard » Fri Nov 03, 2023 11:43 am
This is very nice straight hoo former. Has had the center hole repaired. Coat of paint and it's gone. Did I say very nice and straight? Deal of the day for 100.00 plus shipping. ctleonard64@gmail.com IMG_20231103_103754891.jpg IMG_20231103_103814475.jpg IMG_20231103_103733628.jpg IMG_20231103_103745058.jpg
- 0 Replies
- 464 Views
-
Last post by CTLeonard
Fri Nov 03, 2023 11:43 am
-
-
Corcoran sidelights and taillamp fs. Sold
by
CTLeonard » Fri Nov 03, 2023 11:17 am
Two of these are in nice condition. One sidelight is dented by the jewel. Fonts are excellent, tops are dent free. Red lense is cracked. Only have two burners. 195.00 for all three plus shipping. ctleonard64@gmail.com IMG_20231103_100845748.jpg IMG_20231103_100913931.jpg IMG_20231103_101014701.jpg IMG_20231103_100854172.jpg...
- 0 Replies
- 380 Views
-
Last post by CTLeonard
Fri Nov 03, 2023 11:17 am
-
-
Firestone tires fs. Sold
Replies: 3
by
CTLeonard » Wed Oct 18, 2023 11:23 am
First post
Firestone 30x3 1/2 smooth grey blems .Never mounted. Grays have been discontinued, you can still buy smooth black tires for 413.00 each. Get 4 tires for 180.00 each, total of 720.00 plus shipping
Tubes have been sold ctleonard64@gmail.com 1697642564420253314750201215449.jpg IMG_20231018_092854536.jpg IMG_20231018_092900917.jpg...
Last post
Mike, sent you an email, I’ll take the tires, Larry
- 3 Replies
- 1176 Views
-
Last post by Larry Debaugh
Fri Nov 03, 2023 10:30 am
-
-
WTB 1917-1925 rear depot hack fenders.
Replies: 1
by
BobP » Wed Nov 01, 2023 2:14 pm
First post
I am looking for a pair of rear depot hack fenders for a friend. Let me know what you have, Bob, 507 458 6778.
Last post
bttttttttttttttt do not have to be hack but something similar.
- 1 Replies
- 389 Views
-
Last post by BobP
Fri Nov 03, 2023 7:33 am
-
-
_14- '15 ish misc. SOLD
Replies: 3
by
modeltbarn » Wed Nov 01, 2023 2:31 pm
First post
Dash shield, no hardware, extra piece from 12 dash, $15.
13-14 coil box latches from RV Anderson, $20
Early top clips, good springs, $30
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Last post
Gary ,
I'll take the early top clips.
I'll contact you. Thanks Rich J.
- 3 Replies
- 1118 Views
-
Last post by RichJ
Fri Nov 03, 2023 5:36 am
-
-
Super Halloween Blow Out Sale!
Replies: 8
by
Henry K. Lee » Mon Oct 30, 2023 12:13 pm
First post
These are being sold as lots only unless other wise stated. Email ONLY if interested!
Deep sump kit, dimppled pan for stroker, comes with everything seen to include engine cart. $250.00 pick up only! SOLD !
IMG_1953.jpeg
IMG_1954.jpeg
IMG_1955.jpeg
IMG_1951.jpeg
IMG_1952.jpeg
Last post
I'll have the speedo set if still available, and your happy to sent to new zealand please. Thanks Chris
- 8 Replies
- 2367 Views
-
Last post by Lawrence
Thu Nov 02, 2023 10:04 pm
-
-
24 volt ignition coils for sale
Replies: 3
by
KimDobbins » Wed Nov 01, 2023 6:40 pm
First post
24 volt KW ignition coils for sale. Very good condition, 22 for sale. Make offer on the lot. located in Colorado Springs. kdmks AT att.net.
Last post
I had some that were used to lite off towed targets for Red Eye missiles.
- 3 Replies
- 829 Views
-
Last post by Dan Hatch
Thu Nov 02, 2023 7:23 pm
-
-
Group of wrenches SOLD
by
modeltbarn » Thu Nov 02, 2023 6:04 pm
Assorted wrenches. These will fit in a medium flat rate box. $25 for the bunch.
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- 0 Replies
- 592 Views
-
Last post by modeltbarn
Thu Nov 02, 2023 6:04 pm
-
-
Magneto Bulbs
by
modeltbarn » Thu Nov 02, 2023 6:03 pm
The Titan has 10 wrappers, one is empty, so 9 bulbs. The US Auto Lamp has 4 bulbs. The boxes are falling apart, but the tops are there. I have not unwrapped the bulbs to inspect, as it appears most have never been unwrapped and I don't want to tear the paper. $40 for all of them. These should fit in a medium flat rate box.
All items are plus...
- 0 Replies
- 536 Views
-
Last post by modeltbarn
Thu Nov 02, 2023 6:03 pm
-
-
Side lamp / Tail lamp burners, AAA License Plate Topper
Replies: 2
by
modeltbarn » Wed Nov 01, 2023 2:43 pm
First post
two burners, one original and one repop. I think these are Jno Brown but don't have a lamp to test them on. $45 for both.
AAA license plate topper, $20
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Last post
The burners are sold
- 2 Replies
- 743 Views
-
Last post by modeltbarn
Thu Nov 02, 2023 1:34 pm
-
-
- 5 Replies
- 1076 Views
-
Last post by Ken Buhler
Thu Nov 02, 2023 1:15 pm
-
-
14 coil box and coils fs. Sold
by
CTLeonard » Thu Nov 02, 2023 1:10 pm
Nice 14 coil box and brass top coils. Sold together or separate. Box has had new wood replaced. Coils were rebuilt by ron Patterson and never used. Price for box is 300.00. Coils are 100.00 each. ctleonard64@gmail.com 16989448201676679424818804990876.jpg 16989448359103051937936831452690.jpg 16989448684861222653570022089611.jpg...
- 0 Replies
- 405 Views
-
Last post by CTLeonard
Thu Nov 02, 2023 1:10 pm
-
-
Firewall to frame brackets fs. Sold
by
CTLeonard » Thu Nov 02, 2023 12:12 pm
:x Good original set, even has real bolts and wire clip. 90.00 plus shipping. ctleonard64@gmail.com IMG_20231102_110917619.jpg IMG_20231102_110940852.jpg IMG_20231102_110928248.jpg
- 0 Replies
- 388 Views
-
Last post by CTLeonard
Thu Nov 02, 2023 12:12 pm
-
-
Tranny shaft fs
Replies: 1
by
CTLeonard » Fri Sep 22, 2023 3:49 pm
First post
Measurements on shaft. 75.00 plus shipping. ctleonard64@gmail.com IMG_20230922_144309831.jpg IMG_20230922_144302666.jpg IMG_20230922_144254556.jpg
Last post
Xxxxxxxxxxxx
- 1 Replies
- 542 Views
-
Last post by CTLeonard
Thu Nov 02, 2023 9:03 am
-
-
Metal Valve Stems
Replies: 5
by
modeltbarn » Wed Nov 01, 2023 2:34 pm
First post
Everything for $100
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Last post
Years ago, I tried to get R.V. Anderson (RIP) interested in making Schrader 777 stem reproductions and at the time he didn't think he could make a profit on them.
If someone with a CNC lathe were to take on such a project it would be a great service to the community. :)
- 5 Replies
- 1046 Views
-
Last post by CudaMan
Thu Nov 02, 2023 8:58 am
-
-
- 4 Replies
- 1021 Views
-
Last post by JTT3
Wed Nov 01, 2023 9:12 pm
-
-
FS Klaxon Hand Horn (SOLD pending)
Replies: 3
by
ThreePedalTapDancer » Wed Nov 01, 2023 7:43 pm
First post
Original early Hand Klaxon manual horn. This horn is in nice working condition, and puts out a loud “Aaaawhooo!” when plunger is depressed. It has nice paint with a polished brass bell. The brass bell has seen some things in its 100 plus years lifetime, and has numerous small dings, bumps and scars here and there on the bell mouth, but still...
Last post
ed
i will take it
check in the mail
tom leroux
- 3 Replies
- 474 Views
-
Last post by TLeroux
Wed Nov 01, 2023 8:59 pm
-
-
For Sale: Champion X Spark Plugs
Replies: 5
by
Ed Fuller » Sat Oct 21, 2023 11:17 am
First post
Lot of 9 used Champion X spark plugs.
$50 plus $10 shipping in the U.S.
IMG_2812.jpeg
IMG_2814.jpeg
IMG_2815.jpeg
IMG_2816.jpeg
Last post
Wayne, I sent you an email.
- 5 Replies
- 1227 Views
-
Last post by Ed Fuller
Wed Nov 01, 2023 7:48 pm
-
-
13/32 tap, Master Keys, Ball Socket shims ALL SOLD
Replies: 3
by
modeltbarn » Wed Nov 01, 2023 2:41 pm
First post
13/32-16 tap, new, $25.
Master key sets. One is slightly pitted, three are NOS. These were in my family in the 1950's, supposed to be original; they're definitely not new repops. $20 for the pitted one, $25 for the new ones (each set).
Tie rod ball shims; NOS originals, $10 for all 6
All items are plus actual shipping. I'll have a few...
Last post
The three new sets of keys are spoken for.
- 3 Replies
- 834 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 6:57 pm
-
-
Engine Support arms, 4 dip pan brackets
Replies: 1
by
modeltbarn » Wed Nov 01, 2023 2:54 pm
First post
APCO emergency arm $15
Unmarked emergency arm, tapered hole but will work with washer, $10
4 dip pan set #1, painted black, $20
4 dip pan set #2, not painted, $20
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Last post
Pan set #1 is spoken for
- 1 Replies
- 531 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 5:29 pm
-
-
warford transmission for sale
Replies: 2
by
1977f250 » Tue Oct 31, 2023 1:30 pm
First post
model t warford transmission some gears are rough top and bottom have matching numbers to get images text or call 540 718 6597 asking 450 obo
Last post
sorry im new to this the transmission is a 3 speed and is aluminum i couldnt figure how to load the pics warford manufactured by warren gear products company warren penna
- 2 Replies
- 773 Views
-
Last post by 1977f250
Wed Nov 01, 2023 5:18 pm
-
-
Truss Rod Bracket, Control Rod Swivel
by
modeltbarn » Wed Nov 01, 2023 2:50 pm
Truss rod bracket, one side only, $45.
Control rod swivel, rusty but moves well, $5.
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- 0 Replies
- 509 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 2:50 pm
-
-
Early door latch
by
modeltbarn » Wed Nov 01, 2023 2:48 pm
Latch set, I'm thinking passenger side rear. $45
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- 0 Replies
- 446 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 2:48 pm
-
-
'15sh Headlamp Switch
by
modeltbarn » Wed Nov 01, 2023 2:46 pm
Nice original switch. Looks like it was nickeled, then buffed off to brass. $50
No longer for sale, inconsistent ohm meter lest (sorry about that!
- 0 Replies
- 496 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 2:46 pm
-
-
Pinion Gear
by
modeltbarn » Wed Nov 01, 2023 2:36 pm
11 tooth pinion $50
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- 0 Replies
- 500 Views
-
Last post by modeltbarn
Wed Nov 01, 2023 2:36 pm
-
-
WTB TT Running Board Brackets
Replies: 3
by
22_ Tcoupe » Tue Oct 31, 2023 10:48 pm
First post
I am looking to buy 1, 2 3, or even a whole set of '26-'27 TT running board brackets. If you have the battery box, that would be even better. Let me know what you have. Rusty is fine. It will match the rest of the truck.
Last post
Hi Robert,
Here are pics of running board brackets IMG_2833.jpg , some shacles & a rear spring perch that need a new home also IMG_2834.jpg IMG_2835.jpg
Craig.
- 3 Replies
- 629 Views
-
Last post by Craig Leach
Wed Nov 01, 2023 1:34 pm
-
-
Sold
Replies: 4
by
Jeff Perkins » Sun Oct 29, 2023 8:36 pm
First post
SOLD! Thank You MTFCA
Last post
Touring and runabouts had standard black radiator shells in 1926. This one in particular came off a very early ‘26 touring, the one I own now.
- 4 Replies
- 1122 Views
-
Last post by Jeff Perkins
Wed Nov 01, 2023 7:13 am
-
-
…………..
Replies: 2
by
Junkyard4 » Tue Oct 31, 2023 9:13 am
First post
…………………………….
Last post
THEY ARE SOLD I BOUGHT THEM
- 2 Replies
- 896 Views
-
Last post by Wayne Mims
Tue Oct 31, 2023 9:51 pm
-
-
WTB Bosch Cross Drive Magneto set-up
Replies: 3
by
jmemjr » Tue Oct 31, 2023 8:31 am
First post
I am looking for a Bosch magneto cross drive set-up. I need a set-up that is compatible with a generator style engine. Building up another Rajo engine and likes the performance of it and ease of maintenance and use. Hoping for a complete set-up with the gears, can make the coupling easily. please e-mail john@royalmaster.com
Last post
Sent you a Email.
Mike Bender
Tulsa ok
- 3 Replies
- 950 Views
-
Last post by tman1913
Tue Oct 31, 2023 7:33 pm
-
-
(Sold) HCCT
Replies: 7
by
Mark » Fri Oct 27, 2023 10:16 am
First post
I bought this coil tester years ago and haven't done anything with it. It is in the same condition as when I bought it, except for the wood on the handle that was missing.The handle had already been welded. The coil that is in the tester is for display only and does NOT go with it! I have another tester just like this that I did restore, so it's...
Last post
This has been resolved! Somehow things got mixed up.
- 7 Replies
- 1725 Views
-
Last post by Mark
Tue Oct 31, 2023 6:43 pm
-
-
F.S. Large Warford collection
Replies: 13
by
Nate22huckster » Fri Oct 06, 2023 6:39 pm
First post
I collected these warford parts from swap meets and auctions with the intent of building a speedster but ended up going the more authentic route and built a huckster instead. Currently I’m restoring a Tudor sedan as I now need a back seat for the whole family to be able to ride. The sale of these parts will go towards an upholstery kit for that....
Last post
Update: everything is sold. Thanks MTFCA
- 13 Replies
- 2895 Views
-
Last post by Nate22huckster
Tue Oct 31, 2023 4:25 pm
-
-
- 8 Replies
- 2322 Views
-
Last post by jaybee47
Tue Oct 31, 2023 3:53 pm
-
-
Needed
Replies: 3
by
Dollisdad » Mon Oct 30, 2023 3:50 pm
First post
A rear seat Cocoa mat and one pair of 09/10 front sill plates.
Last post
Thanks for the heads up on the mat. I ordered one from Amazon for 37 bucks. We will see if it works, or belongs at the back door. Still looking for the front sill plates. Have a pair of new rear sill plates to trade. They match the top one in Johns photo.
- 3 Replies
- 948 Views
-
Last post by Dollisdad
Tue Oct 31, 2023 3:10 pm
-
-
FS Right-O-Way Hand Horn (SOLD)
Replies: 1
by
ThreePedalTapDancer » Tue Oct 31, 2023 1:11 pm
First post
Here we have a rare original Right-O-Way hand horn. It is in excellent condition, steel construction with nice paint. It works as designed, and is very loud when the plunger is depressed. The original label is crisp and clear. No damage or serious dents, just some small minor imperfections here and there. Ready to mount and use. 275 includes...
Last post
IMG_1961.jpeg
- 1 Replies
- 439 Views
-
Last post by ThreePedalTapDancer
Tue Oct 31, 2023 1:12 pm
-
-
SOLD: A Great Speedster/Race Car Radiator Shell (Whippet)
Replies: 4
by
GGZ » Fri Oct 27, 2023 2:20 pm
First post
SOLD to Tom!
Here is a great early Whippet radiator shell that was always popular for Model Ts and other brands of speedsters and race cars from this era. It measures about 19 at the bottom width and tapers down, it is about 5 thick and about 26 tall. It is in good condition and be used as-is on an original car or easily restored. These are...
Last post
SOLD to Tom. Thank you!
- 4 Replies
- 995 Views
-
Last post by GGZ
Tue Oct 31, 2023 12:36 pm
-
-
WTB touring top
by
Belliott3 » Tue Oct 31, 2023 10:25 am
Does anyone have a decent old touring top for a 1915/16 T that’s in usable condition?
- 0 Replies
- 349 Views
-
Last post by Belliott3
Tue Oct 31, 2023 10:25 am
-
-
Big Lot of Mostly 1925-1926 'T' Parts
Replies: 2
by
budsstuff » Mon Oct 30, 2023 2:03 pm
First post
ALL parts SOLD
Last post
I'm looking for both front fenders. Do you have for a 1926-1927 Model T Roadster? How much and location? Might be interested in everything but kinda far away. Let's talk.
- 2 Replies
- 741 Views
-
Last post by Kuffs565
Tue Oct 31, 2023 9:55 am
-
-
F.S. Dash Lamps ( Ford ) ?
Replies: 2
by
Stephen1915 » Mon Oct 30, 2023 10:11 pm
First post
4 dash lamps for one money. The three identical ones appear unused. The one on the far left has a bulb socket in it and a cut wire. Nickle is good on all these, but could use a polish.
Not sure if these are the later Ford made accessory type or not.
$80 shipped.
314-287-1901
Last post
Payment pending
- 2 Replies
- 674 Views
-
Last post by Stephen1915
Tue Oct 31, 2023 12:22 am
-
-
- 1 Replies
- 491 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:51 pm
-
-
Hanky's Saturday/Sunday Blow Out Sale
Replies: 17
by
Henry K. Lee » Sat Oct 21, 2023 2:13 pm
First post
More shelving to clear off..., Here we go! Email me if interested, no PM's!
6 volt starter with seal on the shaft! $180.00 plus shipping.
IMG_1891.jpeg
1926/27 fuel tank with straps, one of the best I have seen. Acid bathed and red coat installed.., $200.00 plus shipping.
IMG_1883.jpeg
IMG_1884.jpeg
IMG_1885.jpeg
IMG_1886.jpeg
Last post
Rim Spreaders and Light still available!
- 17 Replies
- 4265 Views
-
Last post by Henry K. Lee
Mon Oct 30, 2023 6:54 pm
-
-
FS 1915 Chassis
by
25tfire » Mon Oct 30, 2023 5:49 pm
1915 Frame, front and rear leaf springs, over axle wish bone, running boards and brackets, front and rear axles, brake lever, front spring clip, rear spring attach U bolts, radius rods and other misc. chassis parts. Local pick up only. Asking $750. Some pictures to your text or email, Jim 970three7three88six4
- 0 Replies
- 659 Views
-
Last post by 25tfire
Mon Oct 30, 2023 5:49 pm
-
-
FS 1914 Engine and Transmission "SOLD"
by
25tfire » Mon Oct 30, 2023 5:36 pm
1914 complete engine and transmission together, condition unknown, removed from a shed, does turn over but stiff. SN 578415. Asking $550 plus shipping or local pick up. Jim nine7zero37388six4 Pictures to your text or email. SOLD Pending payment.
- 0 Replies
- 494 Views
-
Last post by 25tfire
Mon Oct 30, 2023 5:36 pm
-
-
WTB, Waukesha Ricardo head
Replies: 1
by
Billy Vrana » Thu Oct 26, 2023 9:08 pm
First post
Looking for one for a speedster build, let me know if you have one,
Last post
Last one that I've seen for sale was by Mark Friemiller on EBAY with starting bid of $400.00.
- 1 Replies
- 682 Views
-
Last post by ModelTWoods
Mon Oct 30, 2023 12:05 pm
-
-
WTB Buffalo wire wheel & wheel carrier bracket
Replies: 2
by
havnfun » Sun Oct 22, 2023 8:08 pm
First post
I’m looking for one or more original buffalo wire wheels 23inch 30x3.5, also would like to buy a mounting bracket for spare wheel.
IMG_6037.jpeg
Last post
Still looking for the allusive good buffalo wheel(s)
- 2 Replies
- 725 Views
-
Last post by havnfun
Mon Oct 30, 2023 11:55 am
-
-
NOS FRONT SHACKLE SET *SALE*
Replies: 2
by
Stephen1915 » Sun Oct 29, 2023 1:09 pm
First post
1923-27 Style, but will fit all years. These are New old stock. Not slightly used or mint- NEW. GENUINE FORD quality.
314-287-1901
Last post
Pending Payment
- 2 Replies
- 543 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:29 am
-
-
F.S. NOS 1923-1927 REAR SHACKLE SET * SALE*
Replies: 2
by
Stephen1915 » Sat Oct 28, 2023 10:06 pm
First post
Set of Perfect NOS rear Shackles correct for 1923-1927. They even have their NOS tie bars. Genuine FORD. If you want quality these are for you. +
314-287-1901
Last post
Pending Payment
- 2 Replies
- 516 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:28 am
-
-
- 2 Replies
- 689 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:07 am
-
-
Holley G Carburetor Pat’s Dec 22, 1914/sold
Replies: 1
by
Corey Walker » Sun Oct 29, 2023 8:55 pm
First post
Completely disassembled and cleaned, new float, needle and seat, venturi, choke spring, throttle shaft bushing, reconditioned spray needle, test run. $245 postpaid to continental USA email: wlkma9@gmail.com
Last post
Email sent
- 1 Replies
- 558 Views
-
Last post by G.ARMS86
Mon Oct 30, 2023 6:41 am
-
-
Wanted to buy - Ford Special Spindle Arm
Replies: 1
by
Grntea » Thu Oct 26, 2023 9:21 pm
First post
I am looking for a Ford Special Spindle Arm - the one with a hole in it to mount a speedometer drive gear set. Please contact me with a picture and a price! Thanks MTFCA !!!
Last post
Have you found one? I have a set of a L&R I would sell.
Stephen.
314-287-1901
- 1 Replies
- 564 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 12:58 am
-
-
F.S. NOS 5:1 Steering Gears & Pinion *SALE*
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 6:32 pm
First post
For your 5:1 Steering Cars or to convert to one. These parts are NOS GENUINE FORD. 3 of the 5 gears were together, the other two are stragglers. Pinion is NOS as well.
$40 + Flat Rate Shipping
314-287-1901
Last post
Genuine Ford parts for less than reproduction prices.
- 1 Replies
- 505 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 12:55 am
-
-
Stewart Warner Hand Horn
Replies: 5
by
ThreePedalTapDancer » Sat Oct 28, 2023 6:27 pm
First post
Original Stewart Warner 114 hand horn. Excellent original unrestored condition, gears and internals nice and working smoothly with little to no wear. Original paint with chips and some imperfections and surface rust here and there but no serious pitting or damage. Mounting bracket is a replacement. Perfect for original car. Very loud and crisp...
Last post
Ok address sent to your email
- 5 Replies
- 808 Views
-
Last post by ThreePedalTapDancer
Sun Oct 29, 2023 8:16 pm
-
-
Sold Kingston coil box switch
Replies: 4
by
Bjerm » Mon Oct 16, 2023 7:56 am
First post
Really nice coilbox switch. $200 plus the ride best way to reach me is by email bjerm10@gmail.com
Last post
Check your mail
- 4 Replies
- 884 Views
-
Last post by JTT3
Sun Oct 29, 2023 8:12 pm
-
-
Misc Valve Stem Hardware F/S
by
Jeff Perkins » Sun Oct 29, 2023 6:52 pm
One 777 and one 888 Valve stem plus all the misc. nuts,caps etc. some Dill brand, and a few Model A pieces. $100.00 for all INCUDES shipping in the continental USA. or PM.
- 0 Replies
- 521 Views
-
Last post by Jeff Perkins
Sun Oct 29, 2023 6:52 pm
-
-
For Sale: 1913-1919 Closed Pinion Bearing Spool
Replies: 3
by
Ed Fuller » Mon Oct 16, 2023 9:34 pm
First post
1913-1919 closed pinion bearing spool. Would make a good core for a Timken bearing conversion. The bearing sleeve is unusable and very pitted. Housing has no cracks that I can see.
$30 plus shipping in the U.S.
IMG_2777.jpeg
IMG_2775.jpeg
IMG_2778.jpeg
Last post
Still for sale.
- 3 Replies
- 772 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 5:40 pm
-
-
FS HASSLER BOLTS (NORS)
Replies: 4
by
Mark Chaffin » Thu Oct 12, 2023 4:22 pm
First post
I have several NORS Hassler Bolts that recently came out of an estate sale. I have a very small quantity of both the long bolts (3 5/8 ) and short bolts (3 ). I believe these were produced by Jack Daron. These are currently unavailable. Price is $100 each with free domestic shipping. While supplies last. Mark Chaffin (951) 805-0928
Hassler...
Last post
What do you have left? I am mounting double spring Hasslers to my 1914 Speedster. Thanks, Bill
- 4 Replies
- 872 Views
-
Last post by GOLDBARBILL
Sun Oct 29, 2023 4:56 pm
-
-
- 2 Replies
- 639 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:49 pm
-
-
For Sale: 1917-1925 Open Car Door Latch
Replies: 1
by
Ed Fuller » Tue Oct 24, 2023 6:47 pm
First post
For Sale 1917-1925 open car door latch. Operates freely.
$20 plus shipping in the U.S.
IMG_2869.jpeg
IMG_2870.jpeg
Last post
Price drop. $20 plus shipping in the U.S..
- 1 Replies
- 382 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:46 pm
-
-
For Sale: 1914-1916 Door Latches
Replies: 1
by
Ed Fuller » Tue Oct 24, 2023 6:44 pm
First post
For Sale, three 1914-1916 door latches. All the same side. The rusty one is seized and the other two move freely.
$50 plus shipping in the U.S.
IMG_2867.jpeg
IMG_2868.jpeg
Last post
Price drop. $50 plus shipping in the U.S. for all 3.
- 1 Replies
- 423 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:45 pm
-
-
SOLD: pair of Clamert headlight lenses 8.25 inches
Replies: 4
by
Walt Wise » Fri Oct 27, 2023 6:20 pm
First post
These were removed from a Model T headlight rim/ring and fit perfectly in them, just FYI. Lenses are in excellent condition - almost perfect, no chips, and have just a hint of purple to them. See the pics below - the lenses are identical in size, it's just my amateur photography skills that make the single shots different sizes. They are perfectly...
Last post
Mr. Glahn,
Sent you and email and a PM as well. Need your shipping info, so reply to one of those two messages please. Not here though, since they aren't safe anymore from AI.
Thanks!!!
Walt Wise
P.S. Thanks MTFCA as well for another successful sale!!!
- 4 Replies
- 887 Views
-
Last post by Walt Wise
Sun Oct 29, 2023 3:55 pm
-
-
W T B 17-22 Low Hood
Replies: 4
by
Burlingtontguy » Fri Sep 29, 2023 6:56 pm
First post
I am looking for a 17-22 Low Hood to build a 1917 Model T ambulance. Found One,,,, Thanks, Dennis
Last post
to the top
- 4 Replies
- 1143 Views
-
Last post by Burlingtontguy
Sun Oct 29, 2023 1:46 pm
-
-
F.S. NOS 1926-1927 Rear Spring Perches
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 5:13 pm
First post
For the “ Improved Ford” of 1926-1927
These rear perches are Nos originals.
Perfect condition. 90+ years of dirty on these.
$150 + Flat Rate shipping
314-287-1901
Last post
Pending Payment
- 1 Replies
- 381 Views
-
Last post by Stephen1915
Sun Oct 29, 2023 11:44 am
-
-
Running engine for sale May 1922
Replies: 4
by
1915ford » Tue Oct 24, 2023 10:46 am
First post
May 1922 engine for sale. Runs nice i have video of it running on my stand. Still has std iron pistons and original style valves that stand well above the deck. Has starter but no generator. Carb, coils and test stand not included. Pickup in southern minnesota one hour south of mpls. Text me at 507-390-1080 for reply with video. $ 650.00 Thanks....
Last post
Engine sold. Going to Kansas. Thanks.
- 4 Replies
- 1275 Views
-
Last post by 1915ford
Sun Oct 29, 2023 11:06 am
-
-
FS: Splitdorf Model H Magneto…..
Replies: 6
by
George House » Tue Oct 24, 2023 1:09 pm
First post
…. off a 1910 two cylinder Maxwell. Complete. Might’ve been restored by Marks Magneto. Been so long, I can’t remember.Includes spark advance. $750.+ shipping
gwhouse731(at)gmail(dot)com
Last post
My only **Btt* until this ad falls into obscurity 😔
Heck, Merle has the same mag he’d sell for $1 K..
- 6 Replies
- 924 Views
-
Last post by George House
Sun Oct 29, 2023 7:51 am
-
-
FS: Brass Top….
Replies: 2
by
George House » Tue Oct 24, 2023 1:51 pm
First post
….for brass top coil $23 postpaid
gwhouse731(at)gmail(dot)com
Last post
My only **BTT* until this ad falls into obscurity 😔
- 2 Replies
- 722 Views
-
Last post by George House
Sun Oct 29, 2023 7:49 am
-
-
FS: TT Rear Shackles
Replies: 2
by
George House » Tue Oct 24, 2023 1:43 pm
First post
some wear. $30 + USPS small flat rate
gwhouse731(at)gmail(dot)com
Last post
My only **Btt** until this ad falls into obscurity 😔
- 2 Replies
- 463 Views
-
Last post by George House
Sun Oct 29, 2023 7:48 am
-
-
FS Scripted USED Rear Shackles & Tie Bars 1923-27
by
TRDxB2 » Sun Oct 29, 2023 1:55 am
These original used scripted shackles are sold individually with NOS or used scripted tie bars, and used period correct nuts. These all appear to still be usable. Insured USPS shipping is extra PayPal to Family/Friends preferred, checks accepted as well
More items for sale here - save & combine shipping
USED 4 obviously pitted but bolts don't...
- 0 Replies
- 442 Views
-
Last post by TRDxB2
Sun Oct 29, 2023 1:55 am
-
-
- 0 Replies
- 401 Views
-
Last post by TLeroux
Sat Oct 28, 2023 9:45 pm
-
-
For Sale Ruckstell Parts Group SOLD
Replies: 4
by
Bill Mullins » Tue Sep 26, 2023 4:58 pm
First post
Misc. Ruckstell used parts the left differetial housing has a crack.Sold as a group.$150.00 includes shipping.
NEW PRICE
Last post
Bill, put my name in the number 2 spot.
Thanks Kevin
- 4 Replies
- 1145 Views
-
Last post by kevinf
Sat Oct 28, 2023 7:30 pm
-
-
FS: Two 1914 Corcoran Cowl Lamps….
Replies: 1
by
George House » Tue Oct 24, 2023 2:00 pm
First post
…Can’t call them a pair but they’re left and right sides. One has a ‘jewel’ in the rear and the other doesn’t. One has a burner and the other doesn’t. One has a cracked bevel glass and the other doesn’t. Otherwise great condition. $110+the ride… I believe Corcoran was the rarest of the 4 kerosene lamp providers
Last post
Spoken for awaiting payment. Thank you Phill and MTFCA 😎
- 1 Replies
- 501 Views
-
Last post by George House
Sat Oct 28, 2023 6:20 pm
-
-
FS: Complete 1918 Engine & Transmission
Replies: 2
by
George House » Wed Oct 25, 2023 4:24 pm
First post
Looks to be 4 25 18. Motor turns over nicely. This is last year of pre generator. $550. Local pick up only. Need more pictures ? Just ask… gwhouse731(at)gmail(dot)com
Last post
My only **BTT**until this ad falls into obscurity
- 2 Replies
- 598 Views
-
Last post by George House
Sat Oct 28, 2023 6:16 pm
-
-
SOLDNon Ford headlights speedster
Replies: 2
by
Nv Bob » Sat Oct 28, 2023 4:22 pm
First post
Sold thanks Tim and MTFCA
These fit model T forks unknown make in decent shape
Can send more pics
Asking $80 for the pair+ shipping
Last post
Tim replied
If you didn't get it
Try
Jalopyt@yahoo.com
- 2 Replies
- 624 Views
-
Last post by Nv Bob
Sat Oct 28, 2023 6:01 pm
-
-
F.S. NOS ELGIN Front Shackle Set
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 2:49 pm
First post
Pair of NOS Elgin Front Shackles for Model T Ford. These are very nice quality and give a nice high ring when tapped, leading me to believe they are forged like original Ford Shackles. Cotter pin holes are parallel with each other.
$70 Pair + Flat Rate Shipping
314-287-1901
Last post
Pending Payment.
- 1 Replies
- 419 Views
-
Last post by Stephen1915
Sat Oct 28, 2023 3:45 pm
-
-
Parts for sale
Replies: 3
by
KimDobbins » Sun Oct 22, 2023 8:27 pm
First post
1909-11 original hood board with 2 hood hooks. $75.00. Buttler brand brass water pump rebuilt. $200.00. Front license plate mount pat. 1911. Mounts on the radiator neck.$85.00. 2 neverout rear tail light brackets. $60.00 each. All plus shipping, kdmks AT att.net.
Last post
Email sent on the pump
- 3 Replies
- 1090 Views
-
Last post by 1913Runabout
Sat Oct 28, 2023 2:03 pm
-
-
WTB: Scandinavia Linings Pre 26 ;Brake Lining Failure Fall Tour Put Me on the Vulture Wagon
Replies: 16
by
hailey.harris03 » Mon Oct 23, 2023 7:54 pm
First post
I was recently on the St. Louis Chapter's Fall Tour and after earning the trophy of First Woman to Drive on a Tour I also earned the trophy of Brake Transmission Bands Failing in addition to the nickname EXON for anxiously flooding oil into my '23 touring after trusting the sight glass. -NEVER AGAIN- :lol:
*I am looking for some -PRE 26...
Last post
Hi Hailey,
Sorry I don't have any spare bands for sale & after the Kevlar shortage I picked up any bands I could find. Since this has devolved into a forum
discussion I have a question for those that have more experience than I. Having only installed Scandinavia in uninstalled in a car transmissions
( only tested on the run stand ) All of the...
- 16 Replies
- 2302 Views
-
Last post by Craig Leach
Sat Oct 28, 2023 12:24 pm
-
-
WTB- left rear fender TT express bed
Replies: 3
by
Etudes10 » Tue Sep 19, 2023 6:44 pm
First post
I am looking for a left rear fender for a 1925 express bed.
Will consider buying a pair if necessary.
Thanks, Greg
I added a couple of pictures of the right rear fender that I have. Need the the left. The fenders offered by the vendors look different.
Last post
Still looking for a left rear fender. Bump.
- 3 Replies
- 809 Views
-
Last post by Etudes10
Sat Oct 28, 2023 12:07 pm
-
-
wire wheels and tires and pictures
Replies: 4
by
dinosbunny » Sat Oct 21, 2023 8:28 pm
First post
For Sale, Four wire wheels with hubs, front hubs have NEW inner/outer race (installed), NEW inner and threaded outer bearings, NEW seals, NEW cad lug nuts and 4 brand NEW universal black-wall tires with tubes. Tires and tubes still in wrapper-- Bearings have been greased but never run--
SOLD pending payment, thank you
$1600.00 here are some...
Last post
sorry, wheels are sold pending payment, add moved by mistake
- 4 Replies
- 1390 Views
-
Last post by dinosbunny
Sat Oct 28, 2023 11:38 am
-
-
Victor model 2 headlight bucket fs
Replies: 4
by
CTLeonard » Tue May 24, 2022 12:12 pm
First post
A very good bucket for sale. Is missing one of the pins for the reflector. 30.00 plus shipping IMG_20220524_110607817.jpg IMG_20220524_110549004.jpg IMG_20220524_110536918.jpg IMG_20220524_110523360.jpg
Last post
30.00 plus shipping for this really good victor bucket. ctleonard64@gmail.com
- 4 Replies
- 1422 Views
-
Last post by CTLeonard
Sat Oct 28, 2023 11:10 am
-
-
(Found)WTB - two 30x3 round-fellow wheels
Replies: 1
by
bpresslylsmo » Fri Oct 27, 2023 5:23 pm
First post
Looking for a set of front wheels for a 1911 Touring. 2- 30x3 wooden round fellow wheel in good shape. Thanks
email bpresslyLSMO(at)aol(dot)com
Last post
Email sent. ctleonard64@gmail.com
- 1 Replies
- 438 Views
-
Last post by CTLeonard
Sat Oct 28, 2023 8:11 am
-
-
‘24-‘25 parts
Replies: 2
by
G.ARMS86 » Mon Oct 23, 2023 8:04 am
First post
1924-1925 sheet metal parts asking $75 or best offer plus shipping
Last post
To the top
- 2 Replies
- 731 Views
-
Last post by G.ARMS86
Sat Oct 28, 2023 7:14 am
-
-
Crane/Hoist DYRR Mfg Co. $250.00 Sold!
Replies: 2
by
Etudes10 » Fri Oct 27, 2023 7:00 pm
First post
DYRR Mfg Co crane or hoist. Bolts to the bed of any truck or use as a static display. This thing is heavy so shipping is most likely out of the question.
Asking $250.00 or trade?
Nine-0-nine nine-0-8 3876
Last post
Crane is sold. Thanks mtfca!
- 2 Replies
- 870 Views
-
Last post by Etudes10
Sat Oct 28, 2023 12:36 am
-
-
- 0 Replies
- 459 Views
-
Last post by 25tfire
Fri Oct 27, 2023 9:19 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum