Classifieds - Parts - Page 75

Classifieds - Parts

New Topic

9839 topics

Page 75 of 99
- Jump to page:
Previous
1
…
73
74
75
76
77
…
99
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

82007 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

For Sale: Figure 8 Shackles

Last post by Bruce Z « Sat Jun 24, 2023 5:41 pm
Replies: 2
by Bruce Z » Fri Jun 23, 2023 5:36 pm

First post

A set plus of original figure 8 shackles. $80 plus shipping IMG_0949.JPG IMG_0950.JPG IMG_0824.JPG

Last post

New price $40.00

2 Replies

861 Views

Last post by Bruce Z
Sat Jun 24, 2023 5:41 pm
Kevlar band adjustment tips?

Last post by speedytinc « Sat Jun 24, 2023 12:09 pm
Replies: 5
by Reno Speedster » Fri Jun 23, 2023 10:01 pm

First post

I went to adjust my transmission bands today for the first time on this car. After driving it for a year, I was not getting a really positive brake and the pedals were lower than recommended (1 inch from the floor when full down on the low and brake). I opened things up and found that I have virtually new Kevlar bands in the car and the...

Last post

The 1 rule doesnt apply to kevlar.

Proper low pedal setting:...With the motor running.
Back off the adjuster some. Start the motor. Tighten adjuster until you just start to hear the triple gears change their song.(from nothing to a little grumble) Back off 1/2 turn. lock down. Your band is now adjusted to its maximum optimal position with no...

5 Replies

1114 Views

Last post by speedytinc
Sat Jun 24, 2023 12:09 pm
Oil Pan 1911

Last post by Scott Rosenthal « Sat Jun 24, 2023 8:43 am
Replies: 1
by Serge » Fri Jun 23, 2023 4:16 pm

First post

Good morning
I am looking for a one piece oil pan for a 1911 Model T the larger model for the larger magneto.
Serge 450 478-4613

Last post

That's going to be a tough one Serge. Fortunately others have converted the 13 to a single piece pan using a welded in repro panel. If the OEM pan cannot be had, perhaps this is a viable option.

1 Replies

924 Views

Last post by Scott Rosenthal
Sat Jun 24, 2023 8:43 am
For Sale Early roller bearing sleeve

Last post by JTT3 « Sat Jun 24, 2023 1:03 am
Replies: 1
by Bruce Z » Fri Jun 23, 2023 5:03 pm

First post

Drive shaft roller bearing sleeve that has been converted to timpkin bearings. Includes the 6 repro. studs. $50 plus shipping
IMG_0944.JPG IMG_0824.JPG

Last post

Email sent. Thanks

1 Replies

634 Views

Last post by JTT3
Sat Jun 24, 2023 1:03 am
For Sale: Torpedo Door Latch

Last post by Bruce Z « Fri Jun 23, 2023 5:33 pm

by Bruce Z » Fri Jun 23, 2023 5:33 pm

Torpedo door latch. It moves but not free. Needs to be cleaned. $100 Plus shipping IMG_0951.JPG IMG_0952.JPG IMG_0824.JPG

0 Replies

498 Views

Last post by Bruce Z
Fri Jun 23, 2023 5:33 pm
For Sale: Offset Spindles

Last post by Bruce Z « Fri Jun 23, 2023 4:57 pm

by Bruce Z » Fri Jun 23, 2023 4:57 pm

Set of offset spindles. Magnefluxed good, threads are good. $600 IMG_0939.JPG IMG_0938.JPG IMG_0937.JPG IMG_0824.JPG

0 Replies

647 Views

Last post by Bruce Z
Fri Jun 23, 2023 4:57 pm
SOLD: A Nice Pre-1916 Electric Tail Light With Octagonal Brass Rim

Last post by 1913Runabout « Fri Jun 23, 2023 2:34 pm
Replies: 1
by GGZ » Fri Jun 23, 2023 12:28 pm

First post

SOLD!!!'
A good, pre-1916 tail light that is about 4 1/2 in width and 3 in depth. It is in really good condition with the exception of the small, clear side lens which is cracked. The curved red glass and the octagonal brass rim is in great condition. I believe it could be Locomobile but can be used on other makes. Take a look at the photos, that...

Last post

This is Locomobile. Rare and nice, but there are more lamps than cars.

1 Replies

719 Views

Last post by 1913Runabout
Fri Jun 23, 2023 2:34 pm
1924 Window regulator WTB

Last post by TLeroux « Fri Jun 23, 2023 11:09 am
Replies: 5
by John_Grossheim » Thu Jun 22, 2023 3:29 pm

First post

Hello,

I am looking for the pot metal casing for a 1924 Fordor’s Driver side window. I know these were reproduced a few years ago but I cannot seem to find one.

Thanks

Last post

I HAVE TWO NEW HOUSING NO INSIDE PARTS
$50.00 EACH
TOM 714-4123200

5 Replies

899 Views

Last post by TLeroux
Fri Jun 23, 2023 11:09 am
SOLD!!!

Last post by GGZ « Fri Jun 23, 2023 10:59 am
Replies: 12
by GGZ » Wed Jan 04, 2023 11:20 am

First post

SOLD!!!!!!!!!!

Last post

SOLD!!!!!!!!!

12 Replies

3109 Views

Last post by GGZ
Fri Jun 23, 2023 10:59 am
FS X RODS, PISTONS AND RINGS

Last post by Mark Chaffin « Fri Jun 23, 2023 6:35 am
Replies: 1
by Mark Chaffin » Mon Jun 19, 2023 9:19 pm

First post

Here we have five late T Era X rods, Nos teacup pistons and rings. The pistons are standard size as well as the rings. Great addition to your collection. Price for the lot is $600 plus $17.50 domestic shipping. Mark Chaffin (951) 805 0928.

20230619_104814.jpg

20230619_104824.jpg

20230619_104940.jpg

20230619_104958.jpg

Last post

Reduced to $550 plus domestic shipping.

1 Replies

867 Views

Last post by Mark Chaffin
Fri Jun 23, 2023 6:35 am
Carter carbs fs. Sold

Last post by Gene_French « Thu Jun 22, 2023 3:33 pm
Replies: 1
by CTLeonard » Thu Jun 22, 2023 12:27 pm

First post

Have two brass bowl Carter carburators fs. C-rjh-08. Was written on one for 28-31 Chevy. Appear to be complete, have not taken apart. 25.00 for both plus shipping. ctleonard64@gmail.com IMG_20230622_112101295.jpg IMG_20230622_112043464.jpg IMG_20230622_112118026.jpg

Last post

Mike: sent email ...gene french

1 Replies

612 Views

Last post by Gene_French
Thu Jun 22, 2023 3:33 pm
Wanted: Bosch Front Plate for Distributor

Last post by J1MGOLDEN « Thu Jun 22, 2023 3:32 pm
Replies: 6
by C_smith » Sat Jun 17, 2023 12:53 pm

First post

Want to purchase the Bosch front plate for mounting the Bosch distributor. I only need the plate but will consider purchasing a complete unit.
This is a clarification of the ad I posted yesterday. Please phone Chuck in Colorado @ 720-289-2896 as I don't have internet access most of the time.

Last post

My original has been sold.

6 Replies

1330 Views

Last post by J1MGOLDEN
Thu Jun 22, 2023 3:32 pm
FS: RAJO "BB" Rockers, Valves, and Valve Cover.

Last post by themadmodelt « Thu Jun 22, 2023 3:27 pm
Replies: 1
by Retson Ross » Thu Jun 22, 2023 2:29 pm

First post

I received these in a trade with a friend. I build Model A/B stuff, and have no use for this stuff. I'm asking $350 Shipped OBO.

Please note: While the photos look like only one rocker shaft, there are actually two. If you would like more photos or have any questions please feel free to reach out.

Thank you for your interest,
Retson Ross...

Last post

email sent

1 Replies

797 Views

Last post by themadmodelt
Thu Jun 22, 2023 3:27 pm
Brass era parts for sale

Last post by Lifeishard « Thu Jun 22, 2023 12:24 am
Replies: 5
by 1915ford » Thu Jun 15, 2023 9:12 am

First post

Recently acquired estate of long time Mpls collector: Recent brass reproduction of late 1911-12 oil filler timing cover with aluminum oil filler timer body. 1913 chassis: frame, springs, DB front axle, brackets, etc. Complete six rivet rear axle assembly with ds and radius rods. Restored and painted. Contact me for pix and prices. mcam@hughes.net

Last post

Can you give some pictures?

bad time simulator

5 Replies

2019 Views

Last post by Lifeishard
Thu Jun 22, 2023 12:24 am
F-S 1912-14 Timing cover rare

Last post by JTT3 « Thu Jun 22, 2023 12:19 am
Replies: 3
by FATMAN » Wed Jun 21, 2023 11:35 am

First post

1912-14 front timing cover rare 100.00 plus postage
815-633-7244
modelt2001@comcast.net
Bob

Last post

Larry it has the small oil port, they made one similar to that style but it has a taper to the spout that is almost 2 inches longer

3 Replies

999 Views

Last post by JTT3
Thu Jun 22, 2023 12:19 am
SOLD- Model T Parts Books, Orig, & Reprint , Speed and Sport...

Last post by Dan McEachern « Wed Jun 21, 2023 10:16 pm
Replies: 1
by Dan McEachern » Wed Jun 21, 2023 1:18 pm

First post

Several T Books for Sale.
These need a new home.

Model T In Speed and Sport- shop worn reprint. $10.00
KIMG0372.JPG

Original Ford 1923 Price List of Parts Pictures show condition. $20.00
KIMG0373.JPG
KIMG0374.JPG

Lot of 5 various reprints by PolyPrints- $25.00/lot of 5
Ford T Instruction Manual
Watch the Fords Go By
Model T Parts List...

Last post

Books sold to Rich!

1 Replies

557 Views

Last post by Dan McEachern
Wed Jun 21, 2023 10:16 pm
FOUND WTB early combination rear license plate tail light bracket

Last post by CDooREDW « Wed Jun 21, 2023 9:54 pm
Replies: 4
by RGould1910 » Mon Jun 19, 2023 10:17 am

First post

Looking a license plate/tail light bracket to fit my blade style rear tail light bracket for a 1912 roadster. Prefer an original or repro iron bracket.
Richard Gould
rgould1910 at comcast.net

Last post

Original Smith,
I want to buy your original Neverout taillight and tag bracket for my early ‘14 Runabout, please.

Sent you an email.

Ron in HSV

4 Replies

1174 Views

Last post by CDooREDW
Wed Jun 21, 2023 9:54 pm
FS NEW BRASSWORKS RADIATOR

Last post by T Cruiser « Wed Jun 21, 2023 5:41 pm
Replies: 8
by Mark Chaffin » Fri Jun 16, 2023 12:56 pm

First post

I have one new in the box Brassworks high (23-27) flat tube radiator available for purchase. This was purchased for a project I am no longer interested in completing. Our current retail price is currently $1,275.95. They are currently unavailable and prices are likely to go up when they do become available. I am asking $1,350 for this one plus...

Last post

Steve, Ihave a new one

Steve, I have a new one in the box,that I will unable to use. Call me if you are interested. Ted 503-728 3476. When Iget out of the hospital,I plan visiting my daughter in Tacoma.

Steve,

8 Replies

2296 Views

Last post by T Cruiser
Wed Jun 21, 2023 5:41 pm
FS DISTEEL WHEELS

Last post by adenautomotive « Wed Jun 21, 2023 4:54 pm
Replies: 3
by adenautomotive » Mon Jun 19, 2023 7:26 pm

First post

I have a full set of Disteel wheels complete with hubs ,surface rust on wheels key ways in rear hubs look good,message me with any questions 2000.00 obo plus shipping,i will post more photos

Last post

I have lowered the price on the wheels after talking to some members who said price may be to high,dont be afraid to make me an offer on these and feel free to ask for more details on them ,thanks

3 Replies

1354 Views

Last post by adenautomotive
Wed Jun 21, 2023 4:54 pm
Dayton wire wheel pieces F/S

Last post by Layden Butler « Wed Jun 21, 2023 1:41 pm
Replies: 1
by Layden Butler » Tue May 23, 2023 4:41 pm

First post

Wire wheel center for 54 spoke pin drive wheel $165
Hubcap wrench $150
Both very good original parts. Domestic shipping included.

Last post

Anyone need these?

1 Replies

945 Views

Last post by Layden Butler
Wed Jun 21, 2023 1:41 pm
Sold. 1909 starting crank ratchet

Last post by Adam « Wed Jun 21, 2023 12:19 pm
Replies: 3
by Adam » Fri Jun 16, 2023 1:26 pm

First post

SOLD. By the book, it fits 1909 - October 1912, but this one is very heavy compared to others I’ve had so I think it’s probably on the very early end of production. SOLD Thanks.

E53BED56-D9BE-4AB1-88AE-BAE177713BFF.jpeg 4186AA6B-F56D-49A5-97FE-53F378F48D60.jpeg CADE1247-EE8F-4ED1-9178-7F06C6DDB594.jpeg 8DB15CD6-A0B8-4F12-AB91-6D00ACEA168B.jpeg...

Last post

Get the prints & record of change.

3 Replies

1266 Views

Last post by Adam
Wed Jun 21, 2023 12:19 pm
F-S N.O.S. Rear Taper Leaf Spring The Leaf with eyelet

Last post by Ken Buhler « Wed Jun 21, 2023 10:58 am
Replies: 3
by FATMAN » Mon Jun 19, 2023 12:37 pm

First post

F-S N.O.S. Rear Taper Leaf Spring The Leaf with eyelet
very hard to find this and the eyelets do wear so check yours these are New Old Stock 2 for sale 45.00 each plus postage
815-633-7244
modelt2001@comcast.net
no p m's please

Last post

Bob,
I would like to buy one with the eyelet.
Ken

3 Replies

1031 Views

Last post by Ken Buhler
Wed Jun 21, 2023 10:58 am
WTB Pedal Extensions, widens pedals

Last post by Wkndead « Wed Jun 21, 2023 8:22 am

by Wkndead » Wed Jun 21, 2023 8:22 am

Looking to see if anyone has the pedal extension to make a small brake pedal like a 26/27 pedal. Only looking for the brake extension but will take the pair if you have them. And yes I know the dealers sell them. Looking to see if someone has one that has no need for it first.
Thanks

0 Replies

516 Views

Last post by Wkndead
Wed Jun 21, 2023 8:22 am
intake 1926/27

Last post by babychadwick « Wed Jun 21, 2023 6:34 am
Replies: 4
by Melba Nolan » Fri Mar 17, 2023 11:37 am

First post

for sale: vaporizer intake manifold 1926/27 $15 plus postage

20230316_144115.jpg 20230316_144106.jpg

Last post

I ran one of these inverted with a stock t exhaust (non vaporizer) and a simple adapter plate out of 3/8 steel for a Stromberg carb on my speedster. Excellent easy upgrade from the earlier stock intake for anyone interested

4 Replies

1491 Views

Last post by babychadwick
Wed Jun 21, 2023 6:34 am
1925 Fordor doors and body

Last post by Sebass37 « Wed Jun 21, 2023 1:13 am
Replies: 2
by Sebass37 » Tue Jun 20, 2023 1:26 pm

First post

For Sale…Fire victim from 2017 Santa Rosa fire storm. Doors are sound and body is repairable. Would like to sell all together…call 415 328-5841 text or leave message $ 600. Make offer. Thanks.

Last post

Thanks Jack,…new on this forum….still not sure how to upload pics….

2 Replies

928 Views

Last post by Sebass37
Wed Jun 21, 2023 1:13 am
FS Waukesha Ricardo Accessory Head (SOLD)

Last post by RajoRacer « Tue Jun 20, 2023 10:36 pm
Replies: 3
by ThreePedalTapDancer » Tue Jun 20, 2023 5:33 pm

First post

Original Waukesha Ricardo accessory cylinder head. Excellent condition, no repairs or damage. 650 plus shipping.

Last post

Or Nickel ! Difficult to completely see them due the heater shroud.

3 Replies

1109 Views

Last post by RajoRacer
Tue Jun 20, 2023 10:36 pm
FS Joe Gemsa Dual Spark Head Set Up

Last post by ThreePedalTapDancer « Tue Jun 20, 2023 7:18 pm
Replies: 3
by Henry K. Lee » Sun Feb 20, 2022 11:45 am

First post

Just needs a quick clean up and go! Everything is there, including a dual spark Nissan Z24 distributor I fabricated. Can be delivered to Chickasha if paid for in full and contact is made with Ryan (Mad Dog) Snellen prior to March 11. Or Luray in May by Big Brother Rick Rice. Price.., $8,000.00 Firm. Email or Text ONLY if interested....

Last post

Nice set up with history. LaRue Thomas was the fastest ever 1970-79. LBMTFC Signal Hill Climb.

KINGS of the HILL, 1970-1979

1979 Nick D'Antonio 9.57
1978 Jerry Sherman 8.97
1977 LaRue Thomas 7.18 fastest ever
1976 Hank Becker 7.42
1975 Seth Hammond 7.58
1974 Doc Pruden 7.79
1973 Chris Egsgaard 7.74
1972 Al Uslanghi 7.75 rear engine car...

3 Replies

1901 Views

Last post by ThreePedalTapDancer
Tue Jun 20, 2023 7:18 pm
Set of 1913 Wisconsin Plates For T

Last post by Junkyard4 « Tue Jun 20, 2023 10:49 am

by Junkyard4 » Tue Jun 20, 2023 10:49 am

Set of 1913 Wisconsin Plates For T
$300 plus shipping or you can pickup in Libertyville Illinois 10 miles south of the Illinois Wisconsin border
847-508-3634 call or text
IMG_0842.jpeg
IMG_0843.jpeg

0 Replies

554 Views

Last post by Junkyard4
Tue Jun 20, 2023 10:49 am
Wtb. Used 21 inch tires

Last post by Donsolcars « Tue Jun 20, 2023 7:47 am

by Donsolcars » Tue Jun 20, 2023 7:47 am

I am looking for a matching pair of 21 inch tires for the front of my unrestored tt. Hate to put on new ,they just won't match the rest of the truck. Thanks Don

0 Replies

536 Views

Last post by Donsolcars
Tue Jun 20, 2023 7:47 am
WTB: NOS 23-25 turtle deck key

Last post by J1MGOLDEN « Mon Jun 19, 2023 8:00 pm
Replies: 3
by Stephen_heatherly » Sun Jun 18, 2023 1:33 pm

First post

I'm looking for a new old stock turtle deck key for a 23-25 car. I know brand new ones are available, but I want nos. Does anyone have one? Please call or text Stephen Noll at 314 287 1901.

stephensmail2001@gmail.com

Stephen

Last post

Steve, did you get my Email?

3 Replies

1056 Views

Last post by J1MGOLDEN
Mon Jun 19, 2023 8:00 pm
FS: 1926-27 Touring wood body blocks

Last post by micshotrodgarage « Mon Jun 19, 2023 9:32 am
Replies: 1
by bmklawt » Sat Jun 17, 2023 6:16 pm

First post

1926-27 Touring wood body blocks.
Didn’t know if I had the right bocks on my car, bought new ones, I did have the right blocks, these are the ones I took off
$10.00 plus medium flat rate box

Last post

Hello Bruce, I would like to get the body blocks from you if you still have them. Please let me know through my e mail. micscarz@yahoo.com. Thanks. Mike

1 Replies

763 Views

Last post by micshotrodgarage
Mon Jun 19, 2023 9:32 am
FS NORS Spindle Bolt Set - flip top oilers SOLD

Last post by TRDxB2 « Mon Jun 19, 2023 9:29 am
Replies: 2
by TRDxB2 » Mon Jun 19, 2023 1:28 am

First post

One set NORS spindle bolt kit with nut, bushings, oiler caps & cotter pins $56 shipping included to the USA
Prefer PayPal to Family/Friends - checks take longer SOLD

Last post

Good morning, I would like to purchase Your spindle set. Please payment information.
Thanks

Steve Meudt

email sent

2 Replies

772 Views

Last post by TRDxB2
Mon Jun 19, 2023 9:29 am
Update: Bosch front plate for distributor has been found!

Last post by Mark Gregush « Sun Jun 18, 2023 10:21 pm
Replies: 1
by C_smith » Sun Jun 18, 2023 4:28 pm

First post

Hello MTFCA, This forum is great! Contacted yesterday regarding my request for a Bosch Front Plate for distributor. I've been in contact with a seller and arrangements made. Thank You MTFCA!

Last post

Charles, great! As a heads up: You can edit your original post by clicking on the pencil. After opening you can update both the subject and title, will save you from starting a bunch of new post.

1 Replies

776 Views

Last post by Mark Gregush
Sun Jun 18, 2023 10:21 pm
Testing posting pic

Last post by RajoRacer « Sun Jun 18, 2023 8:16 pm
Replies: 1
by Wayne Mims » Sun Jun 18, 2023 8:03 pm

First post

Testing posting pic

Last post

Looks like a photo of a Centerdoor !

1 Replies

652 Views

Last post by RajoRacer
Sun Jun 18, 2023 8:16 pm
FS Ruckstell P148 Shift Lock Assembly (SOLD)

Last post by ThreePedalTapDancer « Sun Jun 18, 2023 6:13 pm

by ThreePedalTapDancer » Sun Jun 18, 2023 6:13 pm

Original Ruckstell P148 26-27 style shift lock assembly. Good condition, ready to use. 400 includes shipping.

IMG_8187.jpeg

0 Replies

684 Views

Last post by ThreePedalTapDancer
Sun Jun 18, 2023 6:13 pm
FS: universal joint

Last post by Craig Leach « Sun Jun 18, 2023 4:01 pm
Replies: 2
by bmklawt » Sat Jun 17, 2023 5:41 pm

First post

New universal joint from Snyder’s I ended up not using.
I could not get this to fit on my new rebuilt engine, the measurements seem right, it was just too much of a pain in the butt to try and figure out what the problem was with the engine in the car. Fit fine on a spare clutch plate I had on the shelf.
$50.00 plus medium flat rate box

Last post

I just installed one of those & I had to dress the shaft to get it on, not much just a little.
Craig.

2 Replies

876 Views

Last post by Craig Leach
Sun Jun 18, 2023 4:01 pm
FS 13-14 6 Screw Coils (SOLD pending)

Last post by Bill Everett « Sun Jun 18, 2023 2:03 pm
Replies: 2
by ThreePedalTapDancer » Sun Jun 18, 2023 12:08 pm

First post

Here is a nice set of two 13-14 6 screw brass top coils. The coils are solid and the wood is square and very nice. Includes two new sets of Nos unmarked replacement points. 150 includes shipping.

IMG_8171.jpeg

Last post

E-mail sent.

2 Replies

888 Views

Last post by Bill Everett
Sun Jun 18, 2023 2:03 pm
FS AERMORE EXHAUST WHISTLE

Last post by Mark Chaffin « Sun Jun 18, 2023 10:17 am
Replies: 2
by Mark Chaffin » Mon Mar 20, 2023 12:57 pm

First post

One brass Aermore exhaust whistle $100 with free domestic shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

Last post

Already sold. Thanks for your interest.

2 Replies

1123 Views

Last post by Mark Chaffin
Sun Jun 18, 2023 10:17 am
For sale Theiman power unit

Last post by Harley_97 « Sun Jun 18, 2023 10:05 am
Replies: 2
by Harley_97 » Sat Jun 17, 2023 3:11 pm

First post

For sale is this Theiman power unit made by the Theiman Harvester Co. in Albert City Iowa.
In the pictures you will see a 1920 Model T motor mounted to the Theiman power unit,
which was used to power flat canvas or leather belts during the steam years.
Motor was last run in 2011. kept in dry storage.
Motor and Theiman power unit cart $1200.00...

Last post

Jon, I sent you an email with phone number.
Thanks Roger

2 Replies

1541 Views

Last post by Harley_97
Sun Jun 18, 2023 10:05 am
Wanted, Brass Windshield Wingnut, 1926 Touring

Last post by Keith Daniels « Sat Jun 17, 2023 9:01 pm
Replies: 4
by Keith Daniels » Fri Jun 16, 2023 9:50 pm

First post

I caught movement out of the corner of my eye and heard it hit the running board, but before it all clicked, we were well down the road. A few trips back and forth didn't turn it up, so short of a metal detector and a wing and a prayer it was gone!

Being a week before the reunion at Richmond, I thought, no big deal, there'll be one there, wrong!...

Last post

Thanks Guys, I did get both your emails. We just got back from town and put her away, I will look at the others in the AM, I think they all have a little bend in the wings. The other 3 have no knickel left on them, brass with patina.

4 Replies

1057 Views

Last post by Keith Daniels
Sat Jun 17, 2023 9:01 pm
For Sale : Exhaust Whistle, $90.00 Plus Shipping

Last post by Mixdiver « Sat Jun 17, 2023 8:51 pm
Replies: 1
by RichardW » Wed Mar 16, 2022 12:40 pm

First post

For Sale : Exhaust Whistle, $90.00 Plus Shipping
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

Last post

Interested in your exhaust whistle if it’s still available

1 Replies

1514 Views

Last post by Mixdiver
Sat Jun 17, 2023 8:51 pm
FS: Ok pair of rusted 1926-27 rear spring perches

Last post by bmklawt « Sat Jun 17, 2023 6:08 pm

by bmklawt » Sat Jun 17, 2023 6:08 pm

FS: Ok pair of 1926-27 rear spring perches
Best offer plus small flat rate box

0 Replies

558 Views

Last post by bmklawt
Sat Jun 17, 2023 6:08 pm
FS: universal joint

Last post by bmklawt « Sat Jun 17, 2023 5:49 pm

by bmklawt » Sat Jun 17, 2023 5:49 pm

Used universal joint, rivets are loose otherwise appears to be a very good U-joint.
Best offer plus medium flat rate box

0 Replies

617 Views

Last post by bmklawt
Sat Jun 17, 2023 5:49 pm
FS: 4 Champion X spark plugs

Last post by bmklawt « Sat Jun 17, 2023 5:18 pm

by bmklawt » Sat Jun 17, 2023 5:18 pm

4 Champion X spark plugs, have no history on these, don’t remember where I got them.
Make me an offer plus small flat rate shipping

0 Replies

1116 Views

Last post by bmklawt
Sat Jun 17, 2023 5:18 pm
1927 Ford Modrl T Speedster

Last post by onesmrtguy « Sat Jun 17, 2023 2:34 pm
Replies: 2
by onesmrtguy » Mon Jun 12, 2023 12:11 am

First post

1927 Ford Model T Speedster. Needs engine work.
$3,495 obo.

Last post

Made unusual noise when the engine started. Might need bearings replaced.

2 Replies

1170 Views

Last post by onesmrtguy
Sat Jun 17, 2023 2:34 pm
FS rebuilt Holley NH center drain carburetor

Last post by NealW « Sat Jun 17, 2023 2:28 pm
Replies: 1
by NealW » Tue Jun 13, 2023 11:00 am

First post

I am selling a Bruce Compton rebuilt Holley NH center drain carburetor. It was my spare carburetor, but I recently picked up a Holley G to use as a spare, as that is more correct for the age of our T's.

The price is $175, which includes priority mail shipping within the US. Please contact me using the information below. Please do not IM me...

Last post

Bump to the top

1 Replies

751 Views

Last post by NealW
Sat Jun 17, 2023 2:28 pm
FS NEW KC (LAYNE) WARFORD

Last post by Mark Chaffin « Sat Jun 17, 2023 2:04 pm
Replies: 5
by Mark Chaffin » Fri Jun 16, 2023 1:14 pm

First post

I have one new in the box (unopened) KC (Layne) Warford transmission available for purchase. This was purchased for a project I am no longer interested in completing. I am asking $3,000 plus shipping. These are currently unavailable from the manufacturer. There is a waiting list. Estimated retail on the next batch is expected to be around $3,150...

Last post

Sorry Tom. You missed it by about 8 hours.

5 Replies

1504 Views

Last post by Mark Chaffin
Sat Jun 17, 2023 2:04 pm
Waltham Clock

Last post by Scott_Conger « Sat Jun 17, 2023 1:30 pm
Replies: 1
by GOLDBARBILL » Sat Jun 17, 2023 12:58 pm

First post

My speedster (Former Oney car) came with a dashboard mounted Waltham 8 Day Clock (Pic attached). I want to detach the mounting device from the firewall but I cannot find any release mechanism. The square mount is attached to the firewall; but how? There are no bolts or screw passing through the firewall. Any ideas. GOLDBARBILL

Last post

William

that is a model 37 two spring 8 day clock (huge watch, really) which often came as a fold out travel clock. When thusly sold, it had either a threaded back or threaded bezel which captured the leatherette fold-out on the case depending on the style of the case. I am going to suggest that you carefully, and without undue force, attempt to...

1 Replies

706 Views

Last post by Scott_Conger
Sat Jun 17, 2023 1:30 pm
Wanted: NIB Prus Head

Last post by RajoRacer « Sat Jun 17, 2023 11:26 am
Replies: 2
by RajoRacer » Wed Jun 14, 2023 10:33 am

First post

Bit of a pickle in the shop - Kevin is currently out of stock and I need a head asap to move my friend's speedster along. Anyone happen to have one of Kevin's heads w/std. spark plugs they would sell & have replaced in kind when he has them in stock ? He estimated perhaps a month out.

Last post

Thanks Rich - I'm currently having a pressure plate made to check out the Z head that came off my friend's engine - if it turns out to be the coolant leak issue, I might take you up on your offer.

2 Replies

1026 Views

Last post by RajoRacer
Sat Jun 17, 2023 11:26 am
Jefferson Coil Tester

Last post by BobP « Fri Jun 16, 2023 3:30 pm
Replies: 10
by BobP » Sat Nov 27, 2021 2:32 pm

First post

For sale, all original untouched Jefferson coil tester. Very nice original condition. Has been in storage for many years. The cord has some fraying and should be replaced. It has the original Jefferson brass tags on it. It tests coils, bulbs and spark plugs. The wood is in great condition with original finish. It is a model 28. $425. NO TEXTING....

Last post

I sold it for $250 a 1/12 years ago, Thanks, Bob.

10 Replies

4053 Views

Last post by BobP
Fri Jun 16, 2023 3:30 pm
Wanted: Original Bosch Front Plate or complete unit.

Last post by C_smith « Fri Jun 16, 2023 1:28 pm

by C_smith » Fri Jun 16, 2023 1:28 pm

Looking for an original Bosch front plate. A Chaffins reproduction would also be ok. Complete is not necessary. Please phone Chuck @ 720-289-2896
Thanks MTFCA!

0 Replies

545 Views

Last post by C_smith
Fri Jun 16, 2023 1:28 pm
WTB High Cylinder Head for 1921 T

Last post by J1MGOLDEN « Fri Jun 16, 2023 1:06 pm
Replies: 1
by vlee528394@aol.com » Fri Jun 16, 2023 10:25 am

First post

Looking for a good high cylinder head for my 1921 Roadster. Thanks,
Steve 404-247-1001

Last post

Why only 1923?

A friend as a 1920 Roadster in excellent condition for $12,000 hat is as good as you could ever find.

1 Replies

605 Views

Last post by J1MGOLDEN
Fri Jun 16, 2023 1:06 pm
Jnobrown 110 fs. Sold

Last post by CTLeonard « Fri Jun 16, 2023 12:22 pm

by CTLeonard » Fri Jun 16, 2023 12:22 pm

8-) Pretty respectable light. Has a dent on top. Font burner and glass are good. 75.00 plus shipping. ctleonard64@gmail.com IMG_20230616_111803359.jpg IMG_20230616_111755072.jpg IMG_20230616_111745987.jpg IMG_20230616_111735522.jpg IMG_20230616_111819835.jpg

0 Replies

514 Views

Last post by CTLeonard
Fri Jun 16, 2023 12:22 pm
E&j 1908 sidelamp fs. Sold

Last post by CTLeonard « Fri Jun 16, 2023 12:05 pm

by CTLeonard » Fri Jun 16, 2023 12:05 pm

This has a good top on it, one small dink. Glass is good, no rust issues. Font has some dents, burner functions as should. 70.00 plus shipping. ctleonard64@gmail.com IMG_20230616_110031680.jpg IMG_20230616_110020885.jpg IMG_20230616_110009835.jpg IMG_20230616_110000233.jpg

0 Replies

451 Views

Last post by CTLeonard
Fri Jun 16, 2023 12:05 pm
E&j 1908 taillight fs. Sold

Last post by CTLeonard « Fri Jun 16, 2023 11:52 am
Replies: 3
by CTLeonard » Thu Jun 15, 2023 2:41 pm

First post

Nice e&j 1908 taillight with clear, red, and blue glass. Has burner just a couple of dinks in top. 185.00plus shipping. ctleonard64@gmail.com IMG_20230615_133315079.jpg IMG_20230615_133350717.jpg IMG_20230615_133335174.jpg IMG_20230615_133326379.jpg IMG_20230615_133320240.jpg

Last post

Email returned

3 Replies

868 Views

Last post by CTLeonard
Fri Jun 16, 2023 11:52 am
F-S Picnic basket for running board

Last post by FATMAN « Fri Jun 16, 2023 9:28 am

by FATMAN » Fri Jun 16, 2023 9:28 am

Just picked this up a nice picnic basket see photos
great for putting on your running board
25.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p m's please

0 Replies

624 Views

Last post by FATMAN
Fri Jun 16, 2023 9:28 am
Flatten hills with a Full Flow Valve™ for your NH

Last post by TeveS-Nor Cal « Thu Jun 15, 2023 8:55 pm
Replies: 6
by Scott_Conger » Sun Jun 11, 2023 11:59 am

First post

Bucking and snarfing on hills? Surging? Can't keep up? Just HAVE to have a fuel pump??

It's probably because you're handicapped with a bad repro float valve which strangles fuel flow! All Full Flow Valves come standard with a LEAD washer to get the best seal possible.

go from standard repro on the left to the Full Flow on the right standard vs...

Last post

Hi- I have tried e-mailing and pm-ing you and nothing- I am a cash customer! Can you try to contact me. Thanks, Steve

6 Replies

1640 Views

Last post by TeveS-Nor Cal
Thu Jun 15, 2023 8:55 pm
For Sale: NOS 1926 1927 Passenger Rear Fender

Last post by Allan « Thu Jun 15, 2023 7:58 pm
Replies: 1
by Junkyard4 » Thu Jun 15, 2023 1:28 am

First post

For Sale: NOS 1926 1927 Passenger Rear Fender. Because of its size and awkwardness to ship I am offering this as pickup only. Located in Libertyville Illinois about 35 miles north of Chicago. Call or text me at 847-508-3634
$250 firm

IMG_0950.jpeg
IMG_0949.jpeg IMG_0984.jpeg
IMG_0983.jpeg

Last post

Paul, that's a right hand fender. Passengers sit on both sides in the rear.

Allan from down under.

1 Replies

618 Views

Last post by Allan
Thu Jun 15, 2023 7:58 pm
For Sale: Fordson Tractor Unit Ignition Coils

Last post by Ron Patterson « Thu Jun 15, 2023 9:07 am

by Ron Patterson » Thu Jun 15, 2023 9:07 am

I have four ignition coils for Fordson tractor branded “Tractor Unit”.
These coils were used in early Fordson tractors circa 1918/19.
If you want to purchase these coil cores I will rebuild them so you can use them in your Fordson Tractor.
If interested please call.
Ron Patterson
two-3-one-3-four-8-five-0-eight-5
Petoskey, Michigan

0 Replies

602 Views

Last post by Ron Patterson
Thu Jun 15, 2023 9:07 am
13 steering column for sale

Last post by Craig E. Luton « Wed Jun 14, 2023 11:38 pm
Replies: 4
by CTLeonard » Tue Jun 13, 2023 2:19 pm

First post

IMG_20230613_131509446.jpg IMG_20230613_131534718.jpg IMG_20230613_131516673.jpg At least I believe it to be 13. Has a broken quadrant, steering gear has road rash and no gears inside. Has a nice sleeve except for a wollered out hole. 100.00 plus shipping. ctleonard64@gmail.com

Last post

Doesn.t 12 have the offset hole in the base where it attaches to the dash? Craig

4 Replies

1269 Views

Last post by Craig E. Luton
Wed Jun 14, 2023 11:38 pm
FS 1920 Touring Body

Last post by Steve Davis « Wed Jun 14, 2023 8:16 pm
Replies: 4
by Steve Davis » Tue May 30, 2023 5:05 pm

First post

Good condition on a rolling chassis; excellent top; steering column; windshield; fenders; aprons and hood. Missing only 1 door. $1,450. (716)640-8591. Photos available.

Last post

Item has been sold. Will contact you if the deal should fall through. Thank you for your interest.

4 Replies

1673 Views

Last post by Steve Davis
Wed Jun 14, 2023 8:16 pm
SOLD: Neat Pair of Accessory All Brass Electric Headlamps and Horn for Model Ts and Others

Last post by GGZ « Wed Jun 14, 2023 5:24 pm
Replies: 1
by GGZ » Wed Jun 14, 2023 5:17 pm

First post

SOLD!
Here is a neat pair of accessory, all brass electric headlamps and a matching electric horn. These would be accessories for 1914 and earlier models that were originally had gas lamps.The lights are 9 in overall diameter and 6 1/2 in depth. The fork mounting is 6 3/4 hole to hole which can be used with 1914 and earlier forks. These would fit...

Last post

A few more photos....

1 Replies

683 Views

Last post by GGZ
Wed Jun 14, 2023 5:24 pm
F-S 1 Pair of 1926-7 rear fenders coupe & roadster

Last post by FATMAN « Wed Jun 14, 2023 2:52 pm
Replies: 1
by FATMAN » Mon Jun 12, 2023 2:37 pm

First post

F-S 1 Pair of 1926-7 rear fenders coupe & roadster
decent condition 450.00 pick up in Loves Park, IL or pay or crating and postage
815-633-7244
modelt2001@comcast.net
no p m's please

Last post

going to t bay

1 Replies

603 Views

Last post by FATMAN
Wed Jun 14, 2023 2:52 pm
F-S Fordor sedan steering bracket to frame-RARE

Last post by FATMAN « Wed Jun 14, 2023 2:51 pm
Replies: 1
by FATMAN » Mon Jun 12, 2023 2:29 pm

First post

Very rare and hard to find Fordor sedan steering post to frame bracket 85.00
Bob
815-633-7244
modelt2001@comcast.net no p m's please

Last post

going to t bay

1 Replies

624 Views

Last post by FATMAN
Wed Jun 14, 2023 2:51 pm
Thread chaser fs

Last post by CTLeonard « Wed Jun 14, 2023 8:44 am
Replies: 1
by CTLeonard » Tue Jun 13, 2023 3:05 pm

First post

Can't find a name on it, but all mancaves need one on the wall. 30.00 plus shipping. ctleonard64@gmail.com IMG_20230613_140126560.jpg IMG_20230613_140115968.jpg IMG_20230613_140107554.jpg

Last post

25.00 plus shipping

1 Replies

812 Views

Last post by CTLeonard
Wed Jun 14, 2023 8:44 am
Ford Script keys $8 ea shipped

Last post by fordrelic « Wed Jun 14, 2023 8:12 am
Replies: 3
by fordrelic » Thu Mar 30, 2023 8:36 am

First post

I have several keys left, but Sold out of these 53,55,58,59,63,64,67 and 69.

Still have other numbers while supplies last.

$8 ea includes shipping to lower 48.

Thanks to all that have ordered keys,
fordrelic

Last post

I still have some keys, but sold out of some numbers.

3 Replies

1021 Views

Last post by fordrelic
Wed Jun 14, 2023 8:12 am
F-0 1926-7 Front fenders passenger side 2 to choose from

Last post by Allan « Wed Jun 14, 2023 6:51 am
Replies: 4
by FATMAN » Mon Jun 12, 2023 2:40 pm

First post

somehow, I wound up with 2 passenger front fenders for 1926-7 decent condition.
250.00 each
decent condition pick up in Loves Park, IL or pay or crating and postage
815-633-7244
modelt2001@comcast.net
no p m's please

Last post

Guys, you are not alone. There are many oversees T model enthusiasts who haunt this forum. With that in mind, referring to the left or right hand side removes any chance of confusion, unless you are of the persuasion that LHD cars are in fact right hand drive when viewed from the front!

4 Replies

859 Views

Last post by Allan
Wed Jun 14, 2023 6:51 am
FS model T coils and Colpin Mag charger

Last post by KimDobbins « Wed Jun 14, 2023 1:34 am
Replies: 9
by KimDobbins » Mon Apr 24, 2023 4:02 pm

First post

4 brass top coils, all test good, $80. 5 coils , 1 is plastic cast, all test good $60. 3 1909 Kingston coils, $100 each. 1 1910-11 Kingston, missing one wood side. $20. All plus shipping.
Colpin mag charger, $100.00.

Last post

All the coils are sold

9 Replies

2337 Views

Last post by KimDobbins
Wed Jun 14, 2023 1:34 am
WTB 16 Door Latch

Last post by RajoRacer « Wed Jun 14, 2023 12:31 am
Replies: 1
by Brian D » Tue Jun 13, 2023 9:25 pm

First post

Needing all three door latches.
Thank you!

Last post

Latches or hinges Brian ????

1 Replies

605 Views

Last post by RajoRacer
Wed Jun 14, 2023 12:31 am
16" of. Steering wheel fs

Last post by CTLeonard « Tue Jun 13, 2023 1:54 pm
Replies: 1
by CTLeonard » Tue Jun 13, 2023 1:43 pm

First post

Pretty nice wheel fs. Spider just comes with it. 35.00 plus shipping. ctleonard64@gmail.com IMG_20230613_124039207.jpg IMG_20230613_124032182.jpg IMG_20230613_124021877.jpg

Last post

Actually found another, so there's two fs at 35.00 each plus shipping

1 Replies

549 Views

Last post by CTLeonard
Tue Jun 13, 2023 1:54 pm
Headlamp glass fs. Sold to phillip

Last post by CTLeonard « Tue Jun 13, 2023 11:58 am

by CTLeonard » Tue Jun 13, 2023 11:58 am

The box says for 14. Three clear glass with rings. Glass measures 8-11/16. One glass is much thicker. Some chips around outer edges.will take 40.00 plus shipping. ctleonard64@gmail.com IMG_20230613_105251621.jpg IMG_20230613_105244972.jpg IMG_20230613_105239642.jpg

0 Replies

515 Views

Last post by CTLeonard
Tue Jun 13, 2023 11:58 am
Pending; Bunch of ball bearing style front wheel bearings

Last post by Adam « Tue Jun 13, 2023 11:26 am

by Adam » Tue Jun 13, 2023 11:26 am

Sold, pending arrival of funds…. What you see is what you get. Email if interested. Please don’t post here or pm. Thank You.

E196A9F4-1324-422B-BB93-9BDC0F931735.jpeg

0 Replies

519 Views

Last post by Adam
Tue Jun 13, 2023 11:26 am
Pacific rim tool fs

Last post by CTLeonard « Tue Jun 13, 2023 9:46 am
Replies: 1
by CTLeonard » Fri Jun 09, 2023 1:39 pm

First post

Combination rim tool-- adjustable. Has had a weld on the handle. Neat wall hanger for sure. 75.00 plus shipping. ctleonard64@gmail.com IMG_20230609_123347427.jpg IMG_20230609_123326600.jpg IMG_20230609_123313970.jpg IMG_20230609_123412961.jpg IMG_20230609_123402327.jpg

Last post

Now 50.00 plus shipping. ctleonard64@gmail.com

1 Replies

803 Views

Last post by CTLeonard
Tue Jun 13, 2023 9:46 am
Please State "For Sale" "Wanted" "Trade", etc.

Last post by DHort « Tue Jun 13, 2023 12:54 am
Replies: 12
by Jerry VanOoteghem » Tue May 16, 2023 1:08 pm

First post

As copied from our beloved Forum Administrator, AdminJeff, (AKA Jeff Stevenson)...

- keep your description as clear and concise as possible in the Subject of your post. This is the first thing ppl see.
Preface the subject with FS: or For Sale: or WTB gives a clear indication of your intention

Good: FS: 1921 sidelights, excellent condition...

Last post

If you are the seller, just click on the pencil to the right to edit the subject line and add the word SOLD

Vertical pictures always get me a yellow triangle. Only horizontal pictures work for me, so that may be your problem.

12 Replies

3188 Views

Last post by DHort
Tue Jun 13, 2023 12:54 am
FS NH STRAIGHT-THRU CARB

Last post by Stephen1915 « Mon Jun 12, 2023 6:49 pm
Replies: 6
by Stephen1915 » Sun Jun 11, 2023 5:47 pm

First post

Here is a later version of the Straight Through Holley NH. It will need the normal round of restoration. Complete with the exception of needle valve and nut. Items which are usually replaced anyway. Bowl is not rust pitted, and neither is the casting. A decent core for a desirable carburetor. Always have trouble with posting pictures on my mobile...

Last post

Pending Payment

6 Replies

1826 Views

Last post by Stephen1915
Mon Jun 12, 2023 6:49 pm
FS RANDS WINDSHIELD HINGES

Last post by Stephen1915 « Mon Jun 12, 2023 6:19 pm
Replies: 2
by Stephen1915 » Sun Jun 11, 2023 7:28 pm

First post

Pair of New reproduction RANDS type windshield hinges. Solid brass, and need some polishing. Never used. One hinge is missing the brass acorn nut.

$60 plus shipping

Call or text
314-287-1901

Last post

Pending Payment

2 Replies

855 Views

Last post by Stephen1915
Mon Jun 12, 2023 6:19 pm
WANTED: 1926-27 Drive Plate

Last post by FATMAN « Mon Jun 12, 2023 2:26 pm
Replies: 6
by Tallpaul » Wed May 17, 2023 11:55 am

First post

Looking for a new or good used transmission Drive Plate

Last post

I just found one if you still need one, Bob

6 Replies

1370 Views

Last post by FATMAN
Mon Jun 12, 2023 2:26 pm
Wanted, Hub puller

Last post by speedytinc « Mon Jun 12, 2023 2:18 pm
Replies: 2
by Paperman » Mon Jun 12, 2023 9:52 am

First post

New guy starting out. Looking for a hub puller for my 27. Working my way through waking this gal up from 60 years of sleep. Engine is out waiting on a cam so Im starting on axle rebuilds. Located in Norhtern MI

IMG_7561.JPG

Last post

Hi Robert,
Does the wood wheel 1927 hub have the recess the same as the wire wheel hub or will the puller for all earlier hubs work?
Craig.

The wood wheel pullers are the same. They thread on.

2 Replies

746 Views

Last post by speedytinc
Mon Jun 12, 2023 2:18 pm
Early top socks

Last post by Craig Leach « Mon Jun 12, 2023 1:12 pm
Replies: 5
by Wayne Mims » Fri Jun 09, 2023 9:20 pm

First post

There was a fellow on here looking for parts for 13 top shocks. He did not show a picture that look clear. Anyway, I have three pieces here. If he sees it, let me know and if any of you need them, let me know

Last post

This is what Wayne has it is a poor copy but I hade to open it take a pic of it then email it to get a foremat that can be uploaded on the forum IMG_2654.jpg
Craig.

5 Replies

1504 Views

Last post by Craig Leach
Mon Jun 12, 2023 1:12 pm
Wanted 1913 Touring top iron

Last post by Original Smith « Mon Jun 12, 2023 11:27 am
Replies: 16
by Russ DeCrease » Fri May 26, 2023 1:41 pm

First post

Please help …. I need only the drivers front iron for a 1913 Touring (the one that attaches to the windshield).

Please, please, please … I’m topless without it (and believe me, that’s NOT an image you want to see on tour)

Russ

Last post

John Boorinakis. 530-401-7777. 545 Dairy Road, Auburn, California 95603

16 Replies

3263 Views

Last post by Original Smith
Mon Jun 12, 2023 11:27 am
FS Front Perches & NORS Spindle & Tie Rod bolts SOLD

Last post by TRDxB2 « Sun Jun 11, 2023 11:51 pm
Replies: 2
by TRDxB2 » Sun Jun 11, 2023 9:03 pm

First post

I prefer PayPal to Friends & Friends - email if interested with your zip code to calculate shipping (likely $10)
Shipping is addition to item price
NORS Spindle Bolt Sets with threaded oiler holes #1 & #4 $60 each SOLD
NORS Tie Rod Bolt #5, #6 & #7 $10 each SOLD
Spindle body brass bushings #8 $6 each reposted separatel y
Front Late style front...

Last post

Frank,

I would like 1,4,5,6,7 if still available

There yours!

2 Replies

713 Views

Last post by TRDxB2
Sun Jun 11, 2023 11:51 pm
15-16 couplet body FS

Last post by JEC « Sun Jun 11, 2023 2:39 pm
Replies: 2
by Nv Bob » Thu May 18, 2023 1:17 am

First post

Heard from the family they reduce there asking price on very fine fully restored 15-16 couplet body
New asking price 15k
Located Sparks Nv

Last post

Is this still for sale?
If so how about some more pictures?

2 Replies

1411 Views

Last post by JEC
Sun Jun 11, 2023 2:39 pm
Speedster Question

Last post by Songo « Sat Jun 10, 2023 10:47 pm
Replies: 1
by Reno Speedster » Sat Jun 10, 2023 10:23 pm

First post

Moved to general forum. Sor

Last post

Hey, I ran a auxiliary transmission on my Speedster and I don't think that there's just not enought horsepower to do what your asking

1 Replies

698 Views

Last post by Songo
Sat Jun 10, 2023 10:47 pm
Minnesota Area Model T Ford Reunion, June10-11

Last post by BobP « Sat Jun 10, 2023 6:22 pm
Replies: 5
by BobP » Thu May 25, 2023 7:46 am

5 Replies

1237 Views

Last post by BobP
Sat Jun 10, 2023 6:22 pm
water inlet 1909/27 NEW PRICE

Last post by Melba Nolan « Sat Jun 10, 2023 5:59 pm
Replies: 3
by Melba Nolan » Fri Mar 17, 2023 12:04 pm

First post

for sale: water inlet with Ford script $10 each plus postage
20230316_142706.jpg 20230316_142639.jpg

Last post

move to top

3 Replies

1082 Views

Last post by Melba Nolan
Sat Jun 10, 2023 5:59 pm
Spark rod swivel 1909 1921 F/S

Last post by Layden Butler « Sat Jun 10, 2023 4:47 pm

by Layden Butler » Sat Jun 10, 2023 4:47 pm

All Model T Fords 1909 thru 1921 used one of these on the steering column end of the spark rod ( that goes to the timer). Am offering a used one at $25 including domestic postage.

0 Replies

631 Views

Last post by Layden Butler
Sat Jun 10, 2023 4:47 pm
Horn button / light switch

Last post by Paul-Geil « Sat Jun 10, 2023 10:46 am
Replies: 1
by 23ford » Thu Jun 08, 2023 11:40 pm

First post

Nice used light switch / horn button combo bought from Model T Haven years ago for a project that got sold,

$65.00 plu th ride.......email me thru this site

Last post

Warren, I sent you an email,
Paul

1 Replies

812 Views

Last post by Paul-Geil
Sat Jun 10, 2023 10:46 am
WTB hitch

Last post by colonelpowers « Fri Jun 09, 2023 9:21 pm

by colonelpowers » Fri Jun 09, 2023 9:21 pm

I am looking for a hitch that will work on my 26 touring. Also looking for a used top boot (even one too bad to use that I can make a pattern off of would be fine) and a set of old but usable side curtains.

Thanks

0 Replies

531 Views

Last post by colonelpowers
Fri Jun 09, 2023 9:21 pm
FS Original Era Sparkplug Explosion Whistle (SOLD)

Last post by Nv Bob « Fri Jun 09, 2023 12:04 pm
Replies: 1
by ThreePedalTapDancer » Wed Jun 07, 2023 1:43 pm

First post

Original cast aluminum “NOPOWERLOSS” brand explosion whistle. Patented Jan. 20, 1920. Made in Chicago Ill. Adapter screws in spark plug hole and works on cylinder pressure. Cylinder fires normally. Emits a loud chirping whistle sound when lever is pulled. Includes nice Firestone plug. Does not cause loss of power when activated. Nice original...

Last post

Sent email

1 Replies

832 Views

Last post by Nv Bob
Fri Jun 09, 2023 12:04 pm
WTB 1926-27 Front Fenders

Last post by DontKnowMuch « Fri Jun 09, 2023 8:01 am
Replies: 4
by modernbeat » Thu Jun 01, 2023 3:37 pm

First post

Looking for two sets of 1926 or 1927 front fenders. Preferably something in rough condition. I can deal with splits, dents, torn bolt holes and rust.
Prefer close to Dallas, Texas, but willing to ship if the price is right.

Last post

I may have what you need and I’m near Dallas. I sent a separate message.

4 Replies

1476 Views

Last post by DontKnowMuch
Fri Jun 09, 2023 8:01 am
13/32 x 16 TPI. Taps FS DS Pinion bearing SOLD OUT

Last post by Petrah Phyre « Thu Jun 08, 2023 11:47 pm
Replies: 29
by Dan Hatch » Mon May 15, 2023 6:28 pm

First post

I still have a few of these taps for the special thread Pinion Bearing bolts. $55 each + shipping. These are made in USA. Email me at address in pictures. Thanks Dan
IMG_2919.jpeg
IMG_0260.jpeg

Last post

Mine showed up on the mail today. Thanks for doing this Dan.

29 Replies

3666 Views

Last post by Petrah Phyre
Thu Jun 08, 2023 11:47 pm
Free 26/7 hog heads

Last post by Richard K « Thu Jun 08, 2023 11:08 pm
Replies: 1
by csnailnrun » Thu Jun 08, 2023 10:14 pm

First post

Located in Nashville. Pick up while you’re in town for the honky tonks or pay for shipping.

Last post

Hi, I would like to get the Hogs Heads Richard (937) 999-9990. Thanks Richard

1 Replies

794 Views

Last post by Richard K
Thu Jun 08, 2023 11:08 pm
SOLD NOS 1917 - 25 Rear Fenders

Last post by Stephen_heatherly « Thu Jun 08, 2023 9:04 pm
Replies: 3
by Erik Johnson » Thu Jun 08, 2023 5:50 pm

First post

Fenders have been sold.

I plan on bringing the following to the June 1th Model T Ford swap meet at the Dakota County Fairgrounds in Farmington, MN

Otherwise, local pick up in south Minneapolis

Pair of NOS 1917-25 rear fenders

My father acquired these new-old-stock fenders from a Ford dealer approximately 70 years ago

Correct for the following...

Last post

Message sent! I can come get them.

Stephen

3 Replies

1056 Views

Last post by Stephen_heatherly
Thu Jun 08, 2023 9:04 pm
FS original pair of 1910 running boards

Last post by Model T Mark « Thu Jun 08, 2023 8:20 pm
Replies: 2
by KimDobbins » Thu Jun 08, 2023 6:56 pm

First post

Pretty good pair of 1910 running boards. These are pretty solid, a few extra holes that they acquired over the years. $200.00 plus postage. Kdmks AT att.net.

Last post

I’ll take them Kim Phil and Mark Eyre get me a shipping price to 49014.

2 Replies

938 Views

Last post by Model T Mark
Thu Jun 08, 2023 8:20 pm
1909-14 white floor mat

Last post by DustySpokes « Thu Jun 08, 2023 7:21 pm
Replies: 3
by KimDobbins » Thu Jun 08, 2023 6:51 pm

First post

1 new 1909-14 white floor mat. This is probably quite a few years old but is still soft and in great condition. This is one of the old high quality ones. All the money goes to RV Anderson’s wife. $200.00 plus postage. Kdmks AT att.net

Last post

It is going to look amazing on my 1912-13 Brass Speedster ( in about 2-3 years upon completion) -Dusty

3 Replies

1074 Views

Last post by DustySpokes
Thu Jun 08, 2023 7:21 pm
For Sale: Set of 4 Wire Wheel Hubs

Last post by Ed Fuller « Thu Jun 08, 2023 5:22 pm
Replies: 9
by Ed Fuller » Thu Mar 30, 2023 6:30 pm

First post

Here is a set of 4 wire wheel hubs. Just out of the blast cabinet. The front hubs have a couple issues (like most original hubs). Both have a spot that’s either a crack or a casting flaw. Kinda hard to tell. Tried to show this in the pictures. The rear hubs have nice tapers and keyways. The drums have some heavy pitting.

$250 plus shipping in...

Last post

Hubs are sold.

9 Replies

2885 Views

Last post by Ed Fuller
Thu Jun 08, 2023 5:22 pm
26-27 Bumpers

Last post by EricMac « Thu Jun 08, 2023 3:43 pm
Replies: 4
by EricMac » Thu May 25, 2023 8:51 pm

First post

I am going to part with this pair of bumpers for a 26-27. They came off my 27 Fordor. I can break them down for shipping. What you see in the photos is what you'll get. I'm asking $250.00 for all, plus actual postage. Eric 2 six 9, for too oh, 3 ate five 2 20230510_193615.jpg 20230510_193615.jpg 20230510_193632.jpg 20230510_193648.jpg

Last post

These are sold thanks for the interest all.

4 Replies

1816 Views

Last post by EricMac
Thu Jun 08, 2023 3:43 pm
Stewart swivel for sale

Last post by Tim D « Thu Jun 08, 2023 9:54 am
Replies: 4
by Tim D » Sat Jun 03, 2023 11:51 am

First post

Have a Stewart swivel for sale cleaned and greased.
1959 L4
2 1/2 to1 and left hand.
L4 April 1919
Good working condition $250 plus shipping in US
Will also include the fiber gear.

Last post

Thank you Russ. I wasn't sure if it would work.

4 Replies

1587 Views

Last post by Tim D
Thu Jun 08, 2023 9:54 am
Stromberg LF for sale

Last post by SurfCityGene « Wed Jun 07, 2023 5:37 pm
Replies: 4
by SurfCityGene » Mon Jun 05, 2023 1:21 pm

First post

This Stromberg LF Carb #977029 Looks nice and is complete with the fuel connection globe. All screw slots and fittings look good and unmolested. The acorn nut for the float adjustment is missing but available. These LF's were a good improvement for anyone not wanting to pay the very high prices for the OF on a Model T. $150. or Best Offer...

Last post

SOLD Thanks MTFCA

4 Replies

1480 Views

Last post by SurfCityGene
Wed Jun 07, 2023 5:37 pm
Fordson tools FS

Last post by Dan Hatch « Wed Jun 07, 2023 1:06 pm
Replies: 3
by Dan Hatch » Sun Jun 04, 2023 1:37 pm

First post

Here is what any young man would want to get into the Fordson engine rebuilding. It is a Hempy Cooper Fordson main bearing boring machine, a Fordson main bearing pouring jig and a homemade Fordson flywheel magnet leveling tool. I am downsizing my shop so they are for sale. Hempy Cooper works, has fake cams and crank handle. Do see any cutters ,...

Last post

Sold pending payment

3 Replies

931 Views

Last post by Dan Hatch
Wed Jun 07, 2023 1:06 pm

New Topic

9839 topics

Page 75 of 99
- Jump to page:
Previous
1
…
73
74
75
76
77
…
99
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum