Classifieds - Parts - Page 84

Classifieds - Parts

New Topic

9454 topics

Page 84 of 95
- Jump to page:
Previous
1
…
82
83
84
85
86
…
95
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

80480 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Steering wheel fs

Last post by CTLeonard « Mon Feb 06, 2023 9:23 am
Replies: 4
by CTLeonard » Fri Jul 22, 2022 9:59 am

First post

Dodge bros. Spider. 15 o.d. wheel. 200.00 plus shipping IMG_20220722_085541746.jpg IMG_20220722_085527453.jpg IMG_20220722_085515377.jpg

Last post

Xxxxxxxxxx

4 Replies

1736 Views

Last post by CTLeonard
Mon Feb 06, 2023 9:23 am
Oil can with bracket

Last post by Harvey Bergstrom « Mon Feb 06, 2023 7:39 am
Replies: 1
by Harvey Bergstrom » Sun Feb 05, 2023 9:22 pm

First post

WTB Oil can with bracket for my ‘24 Touring.

Last post

I’m sorry I forgot to specify that I would like an oil can with the Ford script on it.

1 Replies

1005 Views

Last post by Harvey Bergstrom
Mon Feb 06, 2023 7:39 am
WTB Differential Axle Gears (FOUND)

Last post by MarkS « Mon Feb 06, 2023 12:09 am
Replies: 16
by MarkS » Tue Jan 17, 2023 5:21 pm

First post

I am looking for two differential axle gears (the ones pressed onto the axles) in very good condition for use in my 1915 Touring car. I have purchased new axles, but my existing gears are quite pitted, and I understand that reproductions are not available.

After nearly a year's worth of effort, I have just recently gotten my car back on the road...

Last post

Thanks to all on this forum for the gears and advice I received. I built a holding fixture and was able to press the gears onto my new axles without issues. The press fit was 1.4 thousands interference, and I had to dress one side of the new keys a bit for a nice tap-in with a brass hammer fit. For the fixture, I welded a standard 5/8 -18 nut to...

16 Replies

3602 Views

Last post by MarkS
Mon Feb 06, 2023 12:09 am
Attention! Dan Snell!

Last post by SurveyKing « Sun Feb 05, 2023 9:59 pm
Replies: 1
by Larry LaPatka » Sat Feb 04, 2023 5:12 pm

First post

Dan, all I get is “all circuits are busy when trying to call you or text you. Call me 423.237.8846 or 423.623.5656
Package is ready.
Thanks Larry

Last post

Larry,
I just got your message, I'm out at my ranch where connection is poor. I'll call you tomorrow. Thanks
Dan

1 Replies

1138 Views

Last post by SurveyKing
Sun Feb 05, 2023 9:59 pm
Oil can with bracket

Last post by Harvey Bergstrom « Sun Feb 05, 2023 9:22 pm

by Harvey Bergstrom » Sun Feb 05, 2023 9:22 pm

WTB Oil can with bracket for my ‘24 Touring.
Harvey Bergstrom

0 Replies

797 Views

Last post by Harvey Bergstrom
Sun Feb 05, 2023 9:22 pm
Parts for salec

Last post by Larry LaPatka « Sun Feb 05, 2023 8:23 pm
Replies: 3
by Larry LaPatka » Sun Feb 05, 2023 12:45 pm

First post

Speedo wheel gear and plate $100.00
8 hood pins (4 with springs). $20.00
Original ammeter (black ring). $38.00
Beautiful dome light cover. $12.00
Original Carb pipe $10.00
New 5031 complete wire harness ( 1915-1922). $15.00
New 7853C chrome rear view mirror $35.00
All items plus postage
Call/text/email
Cell: 423.237.8846
Email: ltlapatka@gmail.com

Last post

I am sorry my error. The wiring harness is NOT a 5031 but rather a 5031 for 1915 thru 1922 Model T’s. The price is correct at $15.00 plus postage. Thank You MTFCA

3 Replies

1357 Views

Last post by Larry LaPatka
Sun Feb 05, 2023 8:23 pm
SOLD FS Front Fender

Last post by Stephen1915 « Sun Feb 05, 2023 6:57 pm
Replies: 1
by GPS » Sun Feb 05, 2023 6:26 pm

First post

FS New Old Stock Genuine Ford 1917 to 1923 right front fender. Has areas of surface rust $275.00 gregps@msn.com Cell 612 940 5972

Last post

I’ll take it

1 Replies

732 Views

Last post by Stephen1915
Sun Feb 05, 2023 6:57 pm
SOLD Ford Bumpers

Last post by GPS « Sun Feb 05, 2023 6:15 pm

by GPS » Sun Feb 05, 2023 6:15 pm

FS 1926, 1927 Genuine Ford accessory front and rear bumpers in excellent original condition $500.00 for all plus shipping email gregps@msn Cell 612 940 5972 Greg

0 Replies

707 Views

Last post by GPS
Sun Feb 05, 2023 6:15 pm
For Sale 10 Tooth Pinion Gear (SOLD)

Last post by WaltM « Sun Feb 05, 2023 5:51 pm
Replies: 5
by WaltM » Wed Jan 18, 2023 9:32 am

First post

Item has been sold

Last post

Sold. Thanks, Walt

5 Replies

1470 Views

Last post by WaltM
Sun Feb 05, 2023 5:51 pm
TW timer brushes- round

Last post by Rich P. Bingham « Sun Feb 05, 2023 5:37 pm
Replies: 7
by TWrenn » Wed Feb 01, 2023 2:02 pm

First post

I have a source for which to acquire the round brush for the TW timer. Naturally the larger the quantity the lower the price. Example...12 would be around $26 ea. but if I can scarf up an order for 24 it is down to a bit under $18, plus tax and shipping. Passing cost on directly. I'm not in the parts business. I just want to keep what I feel is...

Last post

One last bump. Don't want to miss anyone !
Thanks to all who responded, you've made this possible !!

7 Replies

1672 Views

Last post by Rich P. Bingham
Sun Feb 05, 2023 5:37 pm
wanted 1910 Exhaust muffler

Last post by T Cruiser « Sun Feb 05, 2023 4:41 pm
Replies: 1
by andrew o sullivan » Sun Feb 05, 2023 3:30 pm

First post

hi there looking wanted new Exhaust muffler 1910 ford model t anybody out there willing t part with it if you have one . i have looked in the parts suppliers but there out of stock

Last post

I have a good original. Ted 503-728-3476

1 Replies

806 Views

Last post by T Cruiser
Sun Feb 05, 2023 4:41 pm
9/16 Upholstery Nails

Last post by Original Smith « Sun Feb 05, 2023 2:11 pm

by Original Smith » Sun Feb 05, 2023 2:11 pm

Want to buy NOS or good used authentic upholstery nails. I'll buy a box if they correct. These may have been used up until the one man tops?

0 Replies

598 Views

Last post by Original Smith
Sun Feb 05, 2023 2:11 pm
Moved

Last post by Reno Speedster « Sun Feb 05, 2023 1:42 pm

by Reno Speedster » Sun Feb 05, 2023 1:42 pm

Moved to correct forum

0 Replies

732 Views

Last post by Reno Speedster
Sun Feb 05, 2023 1:42 pm
1927 "long block"

Last post by TWrenn « Sun Feb 05, 2023 12:55 pm
Replies: 1
by Gen3AntiqueAuto » Sun Feb 05, 2023 11:53 am

First post

Hey guys - I still have this engine sitting here getting dusty. Someone out there must need it. Got bills to pay here, gotta sell some stuff. Located in Middleborough MA. Cash and carry. Video examination so you can get a better look than just a still photo. Click this link to watch (it's on youtube):

Last post

Yep Tim it's 40 over!
And a posted price might help your cause...I dunno.

1 Replies

879 Views

Last post by TWrenn
Sun Feb 05, 2023 12:55 pm
FS: Walden 6318 Engine Block/Oil Pan Special Wrench

Last post by Scott_Conger « Sun Feb 05, 2023 12:17 pm
Replies: 4
by LOCParts » Sun Feb 05, 2023 10:04 am

First post

For Sale: A Walden Worcester #6318 9/16” speed wrench with the 6418 attachment that turns this speed wrench into a one man tool for loosening or tightening 9/16 inch size bolts and nuts commonly found on Model T motors. Unlike many other speed wrenches of this type, the 6418 attachment is removable so the 6318 portion of the wrench can be used as...

Last post

that was a nice wrench at a very nice price. Well done, Charlie!

4 Replies

1287 Views

Last post by Scott_Conger
Sun Feb 05, 2023 12:17 pm
FS: Alvord Model T Main Bearing Reamer

Last post by LOCParts « Sun Feb 05, 2023 11:43 am
Replies: 2
by LOCParts » Sun Feb 05, 2023 9:47 am

First post

For Sale: Alvord F3031-2-3 Model T main bearing reamer. This is a long reamer made by the Alvord Reamer Company of Millersburg, PA. It is designed to ream all three main bearings simultaneously. It is a good reamer to have when fitting a crankshaft to existing babbitt bearings. The reamer cuts bearings to the standard size of 1.250, but it’s...

Last post

The Alvord main bearing reamer has been spoken for.

Thanks MTFCA!

2 Replies

842 Views

Last post by LOCParts
Sun Feb 05, 2023 11:43 am
5Z-815 Wrench

Last post by Model T Matt « Sun Feb 05, 2023 8:28 am
Replies: 5
by Model T Matt » Tue Jan 31, 2023 9:23 am

First post

For sale wrench marked 5Z-815 this is a crankshaft center bearing bolt wrench per the tool list asking $70.00 shipped to your location call Matt 503-824-2681

Last post

sent you a e-mail saying the shipping was included as per the add- got no reply - went to next- Sorry-

5 Replies

1570 Views

Last post by Model T Matt
Sun Feb 05, 2023 8:28 am
SOLD 1913/14 BERGS Show Radiator Kit

Last post by Stephen1915 « Sat Feb 04, 2023 11:11 pm
Replies: 1
by Stephen1915 » Fri Feb 03, 2023 5:21 pm

First post

1913-1914 early 1915. Bergs Made, Round Tube Radiator Kit. Very nicely made components and much heavier gauge material when comparing to a Brassworks. Inlet and outlet connections are solid cast brass , and core fully soldered by Bergs. High Quality.

Have many more up close photos.

Can ship but would be best to deliver to Chickasha.

$750...

Last post

To the top

1 Replies

1074 Views

Last post by Stephen1915
Sat Feb 04, 2023 11:11 pm
WTB - Brake Rods 1920-1925

Last post by SurveyKing « Sat Feb 04, 2023 9:36 pm
Replies: 10
by SurveyKing » Tue Jan 24, 2023 5:59 pm

First post

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

Last post

Thank you, I just ordered them. I always prefer Ford originals but they decent ones don't appear to be out there.

10 Replies

2841 Views

Last post by SurveyKing
Sat Feb 04, 2023 9:36 pm
transmission drums

Last post by Melba Nolan « Sat Feb 04, 2023 9:12 pm
Replies: 4
by Melba Nolan » Mon Sep 26, 2022 7:54 pm

First post

For sale: slow speed drum $150 plus postage
20220723_084930.jpg

Last post

move to top

4 Replies

1693 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:12 pm
worm gear TT 18-27

Last post by Melba Nolan « Sat Feb 04, 2023 9:11 pm
Replies: 2
by Melba Nolan » Sun Nov 20, 2022 10:59 am

First post

For sale: TT worm gear Ford script $200 plus postage
20221120_091907.jpg 20221120_091917.jpg 20221120_091947.jpg 20221120_091923.jpg 20221120_091937.jpg

Last post

move to top

2 Replies

1252 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:11 pm
Brass headlight rims reduced

Last post by Melba Nolan « Sat Feb 04, 2023 9:10 pm
Replies: 5
by Melba Nolan » Thu Aug 11, 2022 12:17 pm

First post

FOR SALE: heavy solid brass headlight rims no cracks. $175 for the pair
inside diameter is 8 15\16
20220811_110735.jpg 20220811_110800.jpg

Last post

reduced price: $150 plus postage

5 Replies

2004 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:10 pm
Early Electric Headlight with Lens

Last post by GatorsModelT « Sat Feb 04, 2023 8:25 pm

by GatorsModelT » Sat Feb 04, 2023 8:25 pm

Early electric headlight with lens. Fits very late 1914 and early 1915 Model T Ford. This is the time when they were phasing out gas and bringing in electric headlights. Brass rim has a few minor cracks. As mentioned above has very good Spreadlight lens. $75

0 Replies

738 Views

Last post by GatorsModelT
Sat Feb 04, 2023 8:25 pm
For Sale Gray Davis #7 Gas Head Light-No Longer Available

Last post by Mr. T Ford « Sat Feb 04, 2023 6:50 pm
Replies: 5
by Mr. T Ford » Mon Nov 07, 2022 6:23 pm

First post

For Sale Gray Davis #7 Gas Head Light, $190 or Best Reasonable Offer. See Attached Photographs.No Longer Available

Last post

For Sale Gray Davis #7 Gas Head Light No Longer Available and Removed From Listing

5 Replies

1713 Views

Last post by Mr. T Ford
Sat Feb 04, 2023 6:50 pm
FS Bosch dist parts

Last post by T Cruiser « Sat Feb 04, 2023 6:09 pm

by T Cruiser » Sat Feb 04, 2023 6:09 pm

Bosch model 600 clip on dist. Cam gear,nut,spacer,resister,and original instruction sheet.$30.00 plus $10.40 shipping cont. US. Ted 503-728-3476

0 Replies

671 Views

Last post by T Cruiser
Sat Feb 04, 2023 6:09 pm
FS: 1911 Holley 4500 Carburetor

Last post by LOCParts « Sat Feb 04, 2023 3:13 pm
Replies: 3
by LOCParts » Sat Feb 04, 2023 11:24 am

First post

For sale: An original 1911 Holley 4500 carburetor. The carburetor we are offering is all brass, complete and in very good condition. The levers and adjustment screw move freely, and the float also free. It can easily be restored to show quality. $1800 plus shipping.

F951CC59-D568-44CA-8005-FFF390122635.jpeg

The 4500 Holley differs from the...

Last post

The Holley 4500 carburetor has been spoken for.

Thanks MTFCA!

3 Replies

1165 Views

Last post by LOCParts
Sat Feb 04, 2023 3:13 pm
FS: Self-Adjusting Connecting Rod Bolts

Last post by LOCParts « Sat Feb 04, 2023 3:12 pm
Replies: 1
by LOCParts » Sat Feb 04, 2023 11:47 am

First post

For Sale: A complete set of self-adjusting connecting rod bolts for the Model T. These bolts replace the stock Ford connecting rod bolts. They are self-adjusting or tightening to keep the connecting rod bearings properly adjusted. The bolts are complete and in good used condition. This is a full set of eight, enough for all four connecting rods....

Last post

The self-adjusting connecting rod bolts have been spoken for.

Thanks MTFCA!

1 Replies

889 Views

Last post by LOCParts
Sat Feb 04, 2023 3:12 pm
FS: Stevens 2713-14 Spindle Bushing Reamer

Last post by LOCParts « Sat Feb 04, 2023 3:10 pm
Replies: 3
by LOCParts » Sat Feb 04, 2023 12:01 pm

First post

For sale: A genuine Stevens, NY reamer for the spindle body and spindle arm bushings. This reamer is two sizes and will do both the bushings in the spindle body and the spindle arms. Most importantly, it will ream the spindle body bushings to the correct .503” size Ford recommended when replacing the bushings. Reamers that will cut .503” are hard...

Last post

The Stevens 2713-14 spindle bushing reamer has been spoken for.

Thanks MTFCA!

3 Replies

1237 Views

Last post by LOCParts
Sat Feb 04, 2023 3:10 pm
Early steering gear case part

Last post by tselliott « Sat Feb 04, 2023 2:20 pm

by tselliott » Sat Feb 04, 2023 2:20 pm

Only the gear housing remains.
Make offer
Scott Elliott
971-5O6-94O2

0 Replies

816 Views

Last post by tselliott
Sat Feb 04, 2023 2:20 pm
For Sale: Stewart Speedometer

Last post by Ed Fuller « Sat Feb 04, 2023 12:10 pm
Replies: 4
by Ed Fuller » Sat Jan 28, 2023 8:35 pm

First post

Stewart speedometer. Shaft turns but is stiff. I’m sure it will need to be gone through. The bezel has one small crack.

$50 plus shipping in the U.S.

E74ABA3A-5801-45FC-9889-63E3ACBE5131.jpeg

6DC1A707-498D-43DD-836F-D9BDD6BEA11D.jpeg

B1C8A5FD-1B50-44F5-AFCC-CE5FB8C4A1D7.jpeg

D1DEE83C-B2B8-4C5D-A61E-AB2BE892B626.jpeg...

Last post

Speedometer is sold.

4 Replies

1716 Views

Last post by Ed Fuller
Sat Feb 04, 2023 12:10 pm
For Sale: Wards Riverside Spark Plugs

Last post by Ed Fuller « Sat Feb 04, 2023 12:10 pm
Replies: 2
by Ed Fuller » Sat Jan 28, 2023 9:23 pm

First post

Here is a nice looking set of 3 Wards Riverside spark plugs.

$30 plus shipping in the U.S.

C90D2F32-B90D-4F19-88E1-A2A9500D43F0.jpeg

CAAA7CC7-0226-43C5-ABF9-3E7C45CD1D7D.jpeg

64793947-9DE3-49C7-9247-CF614EB653F6.jpeg

874AE4DE-BF4B-4245-ACCC-64066D139CFA.jpeg

Last post

Plugs are sold.

2 Replies

1220 Views

Last post by Ed Fuller
Sat Feb 04, 2023 12:10 pm
FS - From Here to Obscurity - Hardcover

Last post by sprobst « Sat Feb 04, 2023 10:41 am
Replies: 2
by sprobst » Sat Feb 04, 2023 10:22 am

First post

I have a 1971 copy of From Here to Obscurity by Ray Miller and Bruce McCalley.

I will sell it to you for the cost of shipping.

Please send me your address through a private message and I will calculate the shipping and you can pay me through paypal.

IMG_2041.jpg

Last post

Sold. I'll get back to the folks that sent PM.

2 Replies

969 Views

Last post by sprobst
Sat Feb 04, 2023 10:41 am
26/27 Roadster pu/ coupe fenders

Last post by fordrelic « Sat Feb 04, 2023 8:04 am

by fordrelic » Sat Feb 04, 2023 8:04 am

I have a set of rear fenders for 26/27 roadster or coupe.
$500 for the set.

0 Replies

675 Views

Last post by fordrelic
Sat Feb 04, 2023 8:04 am
WTB: 26/27 Right Rear Roadster Pickup Fender

Last post by fordrelic « Sat Feb 04, 2023 7:44 am
Replies: 1
by Nathan K » Mon Jan 30, 2023 10:46 pm

First post

I'll take a pair, but I really need the right rear. I'll pay for shipping if you're not within a reasonable drive of St Louis, MO. Thanks.

Last post

I have a pair of fenders if you are interested.

1 Replies

806 Views

Last post by fordrelic
Sat Feb 04, 2023 7:44 am
WTB Model B Zenith Carburetor and Intake manifold FOUND

Last post by fordrelic « Sat Feb 04, 2023 7:41 am
Replies: 5
by henryford2 » Tue Jan 31, 2023 5:44 pm

First post

Looking for a good complete rebuildable core Model B carburetor 1932 and intake manifold. There's a number of the them on Ebay, prefer to buy from a club member and hope to avoid the overpriced shipping and sales tax. Thanks

Last post

I have intake,if you still need one.

5 Replies

1554 Views

Last post by fordrelic
Sat Feb 04, 2023 7:41 am
FS pair of steering arms

Last post by Richard K « Sat Feb 04, 2023 1:23 am
Replies: 2
by Tim D » Thu Feb 02, 2023 3:56 pm

First post

for sale a pair of steering arms with new bushings. Overall nice condition.
$40 for the pair plus shipping in the US $10 by USPS

Last post

Email sent for purchase of the Steering Arms. Rich

2 Replies

1071 Views

Last post by Richard K
Sat Feb 04, 2023 1:23 am
KC warford transmission

Last post by ModelTWoods « Fri Feb 03, 2023 11:31 pm
Replies: 1
by Ron Osburn » Fri Feb 03, 2023 6:07 pm

First post

Want to buy a KC layne warford transmission .
Thank you .

Last post

Layne and some of the vendors sell new ones. Gently used ones are made of unobtainium , because an owner would have to be crazy to sell a used one.

1 Replies

962 Views

Last post by ModelTWoods
Fri Feb 03, 2023 11:31 pm
FTGH A/C Lamp parts

Last post by Scott Rosenthal « Fri Feb 03, 2023 9:40 pm
Replies: 1
by Scott Rosenthal » Wed Feb 01, 2023 10:49 am

First post

Free to good home...Atwood Castle 104A brass amp parts. No glass, fonts, or burners...some usable chimney caps, housings,reflectors, faceted jewels, doors. 2 boxes of parts.
You pay shipping. If not spoken for by 2,5,2023 will be trashed. 513 Three Seven Eight 4235. Phone or Text only please.

Last post

Atwood Castle lamp parts on their way to Randy. Thx Randy and thx MTFCA

1 Replies

901 Views

Last post by Scott Rosenthal
Fri Feb 03, 2023 9:40 pm
FS: 15-inch Model T Steering Wheel Marked "DODGE BROS." (SOLD)

Last post by WaltM « Fri Feb 03, 2023 5:52 pm
Replies: 1
by WaltM » Fri Feb 03, 2023 3:35 pm

First post

Item has been sold

Last post

Sold pending payment. Thanks, Walt

1 Replies

784 Views

Last post by WaltM
Fri Feb 03, 2023 5:52 pm
WTB 1914 Victor Cowl Light Font

Last post by 25tfire « Fri Feb 03, 2023 5:51 pm

by 25tfire » Fri Feb 03, 2023 5:51 pm

Looking for a nice font for the Victor cowl light for my 1914 Touring. This is the Black and Brass style. Jim 970-373-8864

0 Replies

739 Views

Last post by 25tfire
Fri Feb 03, 2023 5:51 pm
NOS/MINT FRONT FENDERS WANTED

Last post by Stephen1915 « Fri Feb 03, 2023 4:50 pm
Replies: 2
by Stephen1915 » Fri Feb 03, 2023 12:59 pm

First post

WANTED: 1923-25 Front fenders NOS or mint condition. No, I don’t want reproduction.

There are two types I know of-
•1923-mid 24 with rib going outside of apron
•1924-25 and Ford Replacement Fender with rib under apron.

Pairs of either of these are fine.

Going to Chickasha.

Please Email me at
stephensmail2001@gmail.com

Last post

Thanks Joe!

2 Replies

826 Views

Last post by Stephen1915
Fri Feb 03, 2023 4:50 pm
FS: APCO Specialty Tool. Steering Wheel Puller (SOLD)

Last post by WaltM « Fri Feb 03, 2023 4:39 pm
Replies: 1
by WaltM » Fri Feb 03, 2023 3:49 pm

First post

Item has been sold

Last post

Sold pending payment. Thanks Walt

1 Replies

715 Views

Last post by WaltM
Fri Feb 03, 2023 4:39 pm
Parts for sale

Last post by Larry LaPatka « Fri Feb 03, 2023 4:04 pm

by Larry LaPatka » Fri Feb 03, 2023 4:04 pm

Speedo wheel gear and plate. $100.00 plus postage
Original ammeter. $38.00 plus postage
Whirligig original. $13.00 plus postage
Dome light cover original. $12.00 plus postage
Mangan mirror for headlight no cracks $30.00 plus usp
Carb pipe original. $10.00 plus postage
T5030 complete wire loom new fits 1915-1922 T’s
$15.00 plus postage
Black side...

0 Replies

892 Views

Last post by Larry LaPatka
Fri Feb 03, 2023 4:04 pm
1909 Model T Champion X Double Ribbed Spark Plugs, 3X NIB,3X loose used, 4x antiques plugs lot

Last post by jscailik82 « Fri Feb 03, 2023 2:21 pm
Replies: 4
by jscailik82 » Wed Jan 18, 2023 1:38 pm

First post

3x NIB Champions, these look to be repros.
2x Used Champions, these look to be repros.
1x used champion X (update found the box)
4X antique plugs, all look to be used.

$250 For everything + postage
UPDATE : Price cut, $120 + postage

I can get more pictures tonight after work.
Located in Mt .Airy, Maryland

Last post

Lot UPDATE: $95 + postage

There are two new NOS wrapped, brand new

One new NOS repro gapped with note about a broken piece. As pictured
The rest (7x) look fired and are either repros or originals. More pics incoming.

$95 +postage

4 Replies

1534 Views

Last post by jscailik82
Fri Feb 03, 2023 2:21 pm
Wanted Running Board Tool Box

Last post by TRDxB2 « Fri Feb 03, 2023 12:29 pm
Replies: 1
by fredserfass12 » Fri Feb 03, 2023 9:50 am

First post

Wanted for my unrestored Model T. An original running board tool box in good undamaged , unmodified condition. Old paint and minimal surface rust okay. Any assistance from fellow club members will be appreciated.

Last post

Wanted for my unrestored Model T. An original running board tool box in good undamaged , unmodified condition. Old paint and minimal surface rust okay. Any assistance from fellow club members will be appreciated.

See my posting below this. Shipping cost is unfriendly

1 Replies

745 Views

Last post by TRDxB2
Fri Feb 03, 2023 12:29 pm
What is this headlight rim used on?

Last post by RandyB « Fri Feb 03, 2023 7:15 am
Replies: 5
by RandyB » Thu Feb 02, 2023 11:41 am

First post

I bought this rim at a swap meet for my Model T shortly after getting into the hobby. I thought it was a T headlight rim until noticing differences with a T rim. This one has a 9-1/8 diameter rather than the 9 diameter on a T headlight rim. There are also 4 steel pads on the outside of the rim, equally spaced. Does anyone know what this is used on?

Last post

I passed it around at the T club meeting last night. No guesses as to what its use was. If it had been modified in the past, the rim showed no tool markings on the inside of the rim where it might have been welded and ground down. I’m just curious enough to see what’s under the paint. Thanks for the replies on the headlight rim.

5 Replies

1288 Views

Last post by RandyB
Fri Feb 03, 2023 7:15 am
WTB: 1927 rear spring perches

Last post by mike catlin « Fri Feb 03, 2023 7:07 am
Replies: 2
by bmklawt » Thu Feb 02, 2023 5:26 pm

First post

I need 2 rear spring perches for my 1927 Touring.
I can't find mine after rebuilding the rear axle, I'm sure they will pop up as soon as buy some replacements.

Last post

Bruce have some will be at kzoo swap meet this afternoon call me at 58six 3o61887

2 Replies

846 Views

Last post by mike catlin
Fri Feb 03, 2023 7:07 am
Luggage rack

Last post by tselliott « Fri Feb 03, 2023 12:39 am
Replies: 3
by tselliott » Fri Jan 06, 2023 4:12 pm

First post

Running board luggage rack. Everything moves freely as it should. It needs some minor straightening.
$20 OBO plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Sorry I forgot to update this post to Sold

3 Replies

1548 Views

Last post by tselliott
Fri Feb 03, 2023 12:39 am
WTB Metal Front Seat Frame Lid for 1922

Last post by Reno Speedster « Thu Feb 02, 2023 9:15 pm

by Reno Speedster » Thu Feb 02, 2023 9:15 pm

I am looking for one of the metal lids over the gas tank for my 22 roadster. I would like one with the hole for gas cap. Smith and Jones show reproductions in the catalogue (see the photo) but they are experiencing some delay. Before I put one on back order I thought I would see if anyone has one on hand. A good or original or a reproduction would...

0 Replies

586 Views

Last post by Reno Speedster
Thu Feb 02, 2023 9:15 pm
1915 Door Lock F/S

Last post by Layden Butler « Thu Feb 02, 2023 3:06 pm

by Layden Butler » Thu Feb 02, 2023 3:06 pm

Door lock for 1915 right rear touring, not stuck works well but needs a spring, $15, domestic postage $10.

0 Replies

581 Views

Last post by Layden Butler
Thu Feb 02, 2023 3:06 pm
F-S 1926-7 Touring body see photos

Last post by FATMAN « Thu Feb 02, 2023 12:31 pm
Replies: 1
by FATMAN » Thu Feb 02, 2023 10:03 am

First post

Nice straight 1926-7 touring body, this is just the body and body parts,
you will need to make 2 patch panels that go behind where the rear fenders mount.
no chassis is included 1500.00 firm, Bob
815-633-7244

Last post

Good deal solid body

1 Replies

756 Views

Last post by FATMAN
Thu Feb 02, 2023 12:31 pm
09 top rear curtain straps

Last post by Scott Rosenthal « Thu Feb 02, 2023 11:44 am
Replies: 2
by Scott Rosenthal » Thu Jan 12, 2023 5:13 pm

First post

FS rear 09 curtain straps, new. Snyders Part number T-3876 LBCE. Does not include brass footman loops. Straps are black with solid brass buckles. 09 does not use D-rings but buckles directly to buggy rail. 35.00
513 three seven eight 4235.

Last post

Curtain straps spoken for, thx Richard and thx MTFCA.

2 Replies

1068 Views

Last post by Scott Rosenthal
Thu Feb 02, 2023 11:44 am
F-S Jno Brown Model 19 Spun Lamp Bodies

Last post by John iaccino « Thu Feb 02, 2023 11:42 am
Replies: 1
by John iaccino » Fri Jan 27, 2023 11:57 am

First post

I have 2 Jno Brown 19 head lamp bodies for sale. Believed to be repop spun bodies. Unused. $90 each plus flat rate shipping.

Last post

Sold to Mike Lebsack pending funds. PM and email sent.

1 Replies

793 Views

Last post by John iaccino
Thu Feb 02, 2023 11:42 am
19-25 Coil Boxes Sold

Last post by mike catlin « Thu Feb 02, 2023 11:32 am
Replies: 3
by rickd » Wed Feb 01, 2023 7:41 pm

First post

Two coil boxes for restoration. Solid boxes, one with the internal parts, the second one just the box and lid. $45.00+ $22.00 ups shipping for the pair. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg B4.jpg

Last post

Rick please call me 58six 3o61887

3 Replies

1026 Views

Last post by mike catlin
Thu Feb 02, 2023 11:32 am
SOLD; Floorboards, know idea what they fit

Last post by BUSHMIKE « Thu Feb 02, 2023 9:53 am
Replies: 3
by bmklawt » Wed Feb 01, 2023 10:11 am

First post

I have part of a floorboard, 1927 or later written on them, anyone interested in them? They are yours for the cost of shipping.

Last post

Bruce, I haven't heard anything back from the initial email? Did I get them?
Mike

3 Replies

1113 Views

Last post by BUSHMIKE
Thu Feb 02, 2023 9:53 am
counter weights reduced

Last post by Melba Nolan « Thu Feb 02, 2023 8:18 am
Replies: 4
by Melba Nolan » Sun Jul 31, 2022 8:03 pm

First post

FOR SALE: Crankshaft counter weights for sale. $75 plus postage 20220726_174038.jpg 20220726_174103.jpg

Last post

move to top

4 Replies

1679 Views

Last post by Melba Nolan
Thu Feb 02, 2023 8:18 am
hot air pipe 19/24

Last post by Melba Nolan « Thu Feb 02, 2023 8:17 am
Replies: 1
by Melba Nolan » Sun Jan 08, 2023 1:03 am

First post

For sale: hot air pipe 1919/24. good condition other than 2 holes that could be patched. $10 plus postage
20221226_091208 (1).jpg 20221226_091238.jpg 20221226_103356.jpg 20221226_103419 (1).jpg

Last post

move to top

1 Replies

687 Views

Last post by Melba Nolan
Thu Feb 02, 2023 8:17 am
'23 and '26 TT for sale

Last post by FM2102 « Wed Feb 01, 2023 10:19 pm
Replies: 2
by FM2102 » Wed Feb 01, 2023 3:55 pm

First post

I have two Ford Model TT's for sale. 1923, and 1926. The '26 is a complete truck, but completely apart. I have all the parts for it. It ran and drove when I took it apart. It has a steel cab with doors. I also have a C cab that could be used instead of the enclosed cab. Also have the bed frame and metal strips. The '23 is missing the front axle...

Last post

Model A cab. Not for sale.

2 Replies

1101 Views

Last post by FM2102
Wed Feb 01, 2023 10:19 pm
FS: Pair of 1914 Rear Touring Roadster Fenders (SOLD)

Last post by WaltM « Wed Feb 01, 2023 8:51 pm
Replies: 3
by WaltM » Wed Feb 01, 2023 1:33 pm

First post

Item has been sold

Last post

Sold pending payment. Thanks

3 Replies

978 Views

Last post by WaltM
Wed Feb 01, 2023 8:51 pm
Carter Updraft Carb

Last post by rickd « Wed Feb 01, 2023 7:19 pm
Replies: 2
by rickd » Wed Feb 01, 2023 6:40 pm

First post

Carter updraft carburetor. This has been in one of my parts buckets for about 30 years. I don't know anything about it. Missing the bowl and float. If the speedster guys can use this carb email me or post something here. C1.jpg C4.jpg C2.jpg C3.jpg

Last post

Thanks Frank! I was hoping you could solve this for me.

2 Replies

841 Views

Last post by rickd
Wed Feb 01, 2023 7:19 pm
Airplane Radial Engine Radiator Ornament (SOLD)

Last post by ThreePedalTapDancer « Wed Feb 01, 2023 5:53 pm

by ThreePedalTapDancer » Wed Feb 01, 2023 5:53 pm

Here is an original radial engine radiator cap ornament. The solid aluminum blade is a replacement. It needs to be drilled for a shaft, and an appropriate sized bearing inserted inside the radial engine for the propellor shaft to spin on. Easy project for the creative tinker. These are very hard to find, the blades are not being reproduced in...

0 Replies

857 Views

Last post by ThreePedalTapDancer
Wed Feb 01, 2023 5:53 pm
FS E&J 466 headlights

Last post by Model T Tom « Wed Feb 01, 2023 11:49 am
Replies: 3
by Model T Tom » Mon Jan 30, 2023 8:36 am

First post

Theses are new Gilbert lights . Perfect
$1000.00 plus shipping
Tom Butterworth
772-475-9142

Last post

Sold thanks

3 Replies

1416 Views

Last post by Model T Tom
Wed Feb 01, 2023 11:49 am
Nonpareil Single Twist Horn FS

Last post by rickd « Wed Feb 01, 2023 10:59 am
Replies: 1
by rickd » Sat Jan 28, 2023 2:32 pm

First post

Small dent in the bottom and missing the rim and screen. $50.00+$17.00 usps shipping. Check or money order. Email me through this site. H1.jpg H2.jpg H3.jpg H4.jpg

Last post

Price lowered.

1 Replies

778 Views

Last post by rickd
Wed Feb 01, 2023 10:59 am
Floorboards

Last post by VinTin23 « Wed Feb 01, 2023 8:28 am
Replies: 1
by 23ford » Tue Jan 31, 2023 7:14 pm

First post

What is the contact number for the guy that makes the floorboards?

Last post

I purchased my floorboards from Lang’s. They were excellent quality and fit perfect with zero modifications. I was told at some point that they were made by Jon Anderson Antique Automobile Wood Specialties. This may not be the case, but regardless, I have purchased other wood products from them and they are outstanding quality. Give him a call, he...

1 Replies

1043 Views

Last post by VinTin23
Wed Feb 01, 2023 8:28 am
1925 Windshield Stanchions FS

Last post by rickd « Wed Feb 01, 2023 8:00 am

by rickd » Wed Feb 01, 2023 8:00 am

25 windshield stanchions, extra part from a recent restoration, epoxy primed. $65.00+$22.00 shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg S4.jpg

0 Replies

602 Views

Last post by rickd
Wed Feb 01, 2023 8:00 am
Bud Vase holders

Last post by Divcoone « Wed Feb 01, 2023 6:48 am
Replies: 3
by Divcoone » Sat Jan 28, 2023 9:11 am

First post

2 steel and 2 cast aluminum. $40.00 plus $12.00 priority mail. Personal check with hold. NO PAYPAL.
Bob Giles
Johnstown, Pa.

Last post

Contact Jim.

3 Replies

1274 Views

Last post by Divcoone
Wed Feb 01, 2023 6:48 am
for sale, "lowered price" 2 NOS "Ford Steering Controls" in original boxs

Last post by dobro1956 « Tue Jan 31, 2023 11:16 pm
Replies: 1
by dobro1956 » Tue Jan 31, 2023 12:42 pm

First post

I have 2 NOS Ford Steering Controls in the original boxes for sale. One of them is nickel plated and the other is black Japan enamel painted. The black one will be correct on brass era and also nickel era cars. The nickel one is most correct for 1917 to 1927 cars. They both will fit all years of Ts and TTs. These do actually give a little help to...

Last post

..........

1 Replies

886 Views

Last post by dobro1956
Tue Jan 31, 2023 11:16 pm
WTB '09-'10 good engine head

Last post by TRDxB2 « Tue Jan 31, 2023 7:38 pm
Replies: 1
by TRDxB2 » Mon Jan 30, 2023 6:25 pm

First post

Looking for an '09 or '10 engine head without issues . Please email me so I can see photos. Thanks

This is the preferred head
1910 head with raised mold marks -pic1.jpg
--
--
Second choice but strong contender

Last post

Bump to the top

1 Replies

727 Views

Last post by TRDxB2
Tue Jan 31, 2023 7:38 pm
Running Board Toolbox

Last post by su8pack1 « Tue Jan 31, 2023 3:23 pm
Replies: 3
by Larry LaPatka » Mon Jan 30, 2023 3:19 pm

First post

An extremely nice, dent free and rust free running board tool box. New single stage black paint. 21” long
$130.00 plus freight
Text: 423.237.8846
Email: ltlapatka@gmail.com

Last post

Thank you.

3 Replies

1305 Views

Last post by su8pack1
Tue Jan 31, 2023 3:23 pm
SOLD - High Speed Ruxstell Rear End for TT Truck

Last post by GatorsModelT « Tue Jan 31, 2023 3:01 pm
Replies: 2
by GatorsModelT » Thu Jan 19, 2023 7:54 pm

First post

SOLD -- High Speed Ruxstell Rear End for TT Truck. Completely rebuilt with new bull gear and worm gear set. $2000. Gears were made by Mike Hartmann, Mike's Machine Shop in Arkansas. Photos available on request. I can deliver at Chickasha in March.

Last post

SOLD - TT Truck Ruxstell Rear End

2 Replies

1141 Views

Last post by GatorsModelT
Tue Jan 31, 2023 3:01 pm
Wtb ruckstell

Last post by MAG « Tue Jan 31, 2023 3:01 pm
Replies: 1
by Steve Bender » Tue Jan 31, 2023 10:53 am

First post

I'm looking for a Ruckstell rear end that I could rebuild.
I prefer a 26/27 or even a left side ruckstell housing. I would also consider earlier ruckstell. Like to pickup at Chickasha pre war meet. Please email me or you can text to 316 640 5026.

Thanks
Steve Bender

Last post

email sent

1 Replies

846 Views

Last post by MAG
Tue Jan 31, 2023 3:01 pm
SOLD - Model T Frame - Late 1912 to early 1913

Last post by GatorsModelT « Tue Jan 31, 2023 2:54 pm
Replies: 2
by GatorsModelT » Wed Apr 13, 2022 11:59 pm

First post

1911 - 1912 to early 1913 Model T Frame - Very good condition. Is sandblasted, primed and painted. Has rear fender brackets on it. The running board support rods are also there. More photos available.
Can deliver to Chickasha, Ok or Luray, VA swap meets in March and May.
$1200.00 or OBO.

Last post

SOLD - Model T Frame 1911-1912 to early 1913

2 Replies

1719 Views

Last post by GatorsModelT
Tue Jan 31, 2023 2:54 pm
Side lamp brackets fs

Last post by CTLeonard « Tue Jan 31, 2023 1:59 pm

by CTLeonard » Tue Jan 31, 2023 1:59 pm

One says ford b t7258 the other doesn't. They are the same though. 30.00 plus shipping. ctleonard64@gmail.com IMG_20230131_125337461.jpg IMG_20230131_125322219.jpg

0 Replies

667 Views

Last post by CTLeonard
Tue Jan 31, 2023 1:59 pm
WTB exhaust cutout for exhaust whistle

Last post by Reno Speedster « Tue Jan 31, 2023 1:53 pm
Replies: 13
by Reno Speedster » Tue Jan 24, 2023 5:55 pm

First post

I am looking for an exhaust cutout for an exhaust whistle on my 1922. I would prefer an original cast iron one in decent shape to go on a car.

Last post

Rich,
Sorry, something seems to be going on with my emails. I didn’t get the message. I am sending to a PM and email with my contact information.

13 Replies

2450 Views

Last post by Reno Speedster
Tue Jan 31, 2023 1:53 pm
Wtd side lamp bracket like pictured

Last post by Model T Mark « Tue Jan 31, 2023 1:49 pm

by Model T Mark » Tue Jan 31, 2023 1:49 pm

Wanted 1 side lamp bracket like pictured. meyre14t@yahoo.com

0 Replies

740 Views

Last post by Model T Mark
Tue Jan 31, 2023 1:49 pm
Float mechanism early brass carb F/S

Last post by Layden Butler « Tue Jan 31, 2023 1:14 pm

by Layden Butler » Tue Jan 31, 2023 1:14 pm

Nice shape, float looks plenty good enough to reseal and use, $85, domestic shipping $10.

0 Replies

551 Views

Last post by Layden Butler
Tue Jan 31, 2023 1:14 pm
WTB 1914 Bolts for Bracket to firewall.

Last post by Original Smith « Tue Jan 31, 2023 11:40 am
Replies: 5
by Brian D » Sat Jan 28, 2023 1:30 pm

First post

Looking for all 6 correct carriage bolts for my 1914 Touring, the ones from the bracket to firewall.
They have a high dome heads.
They are 5/16.
The graph paper is 1/4.
The holes do lineup it was how I was holding with one hand and taking photo with other.
Brian
586 864 5110.

Last post

Some of Gail's research is in the latest Model T Judging Guidelines, and I believe when I was reading it recently it says the heads are 13/16 .

5 Replies

1304 Views

Last post by Original Smith
Tue Jan 31, 2023 11:40 am
WTB Holley Float Arm

Last post by Loftfield « Tue Jan 31, 2023 7:00 am
Replies: 3
by Loftfield » Mon Jan 30, 2023 11:36 am

First post

Rather desperately seeking float arm for Holley 4550 carburetor, 1912. Lang's supplier is deceased. Prefer to buy just the arm but will consider purchase of more of the carburetor if available.

8two8 two4three-seven4five four

Brevard, North Carolina

Last post

For those who care, advice was given to contact Corey Walker for the float arm. Short story even shorter, he had one, in the mail as we read. I had bought a refurbished NH from him several years ago, excellent carb but not correct for the 1912. Meanwhile, the Holley H1 in question has been rebuilt (with new needle and seat) by The Old Carb Doctor,...

3 Replies

1208 Views

Last post by Loftfield
Tue Jan 31, 2023 7:00 am
FS Early Transmission

Last post by Dan Hatch « Tue Jan 31, 2023 4:40 am
Replies: 6
by Dan Hatch » Sat Jan 21, 2023 3:31 pm

First post

I got two early NON Starter Transmissions FS. You know what I know. They are all there. I put a tape on magnets look to be 3/4”. $100 EACH PICKUP HERE. Email me at address in pictures. Thanks Dan
73342502-B788-45BF-923C-5B1A4749A84E.jpeg
8256C0A9-F481-4E1C-894D-5FD674D008AC.jpeg
18F9D9A3-FF4F-4742-B9B4-E9E04F3EBD92.jpeg...

Last post

Back to the top

6 Replies

1597 Views

Last post by Dan Hatch
Tue Jan 31, 2023 4:40 am
Wanted High Compression Head Ford Script

Last post by frontyboy « Tue Jan 31, 2023 12:18 am
Replies: 1
by Model T Ron » Mon Jan 30, 2023 10:09 pm

First post

Looking for a Z head with Ford and Made In USA cast into it. If you have one send me a message.

Thanks
Ron

Last post

contact Steve Zajicek 586-983-9771(Michigan) He makes new Z heads and they are beautful. The script is bold and sharp. I just purchased my 2nd one as they are perfect.

frontyboy

1 Replies

635 Views

Last post by frontyboy
Tue Jan 31, 2023 12:18 am
WANTED Ultrasonic Cleaner

Last post by J1MGOLDEN « Mon Jan 30, 2023 8:33 pm
Replies: 3
by J1MGOLDEN » Sun Jan 29, 2023 5:31 pm

First post

The ultrasonic I need is an L&R T-28 that is several years old or a schematic of the generator part of one that tells me what the size of three burned out resistors.

Last post

The reason I want that brand is because I have one with three burned out resistors and I need a good one or a schematic to know what size they are.

3 Replies

919 Views

Last post by J1MGOLDEN
Mon Jan 30, 2023 8:33 pm
E&J burners fs

Last post by CTLeonard « Mon Jan 30, 2023 12:44 pm
Replies: 1
by CTLeonard » Tue Jan 17, 2023 1:46 pm

First post

Couple of nice burners fs. Wheels spin as they should. These are 150.00 each in the book. 150.00 plus shipping for both. ctleonard64@gmail.com IMG_20230117_123932323.jpg IMG_20230117_123952125.jpg IMG_20230117_124243313.jpg IMG_20230117_123943865.jpg

Last post

Xxxxxxxxxx

1 Replies

773 Views

Last post by CTLeonard
Mon Jan 30, 2023 12:44 pm
26-7 Ford Transmission Bands Sold

Last post by rickd « Mon Jan 30, 2023 12:36 pm
Replies: 3
by rickd » Fri Jan 27, 2023 8:11 pm

First post

1926-7 Ford Detachable Ear Transmission Bands. Bead blasted and painted. Excellent condition. $75.00+$22.00 shipping. Check or money order. Email me through this site. B1.jpg B2.jpg

Last post

They are yours Ken. I just sent you an email.

3 Replies

1033 Views

Last post by rickd
Mon Jan 30, 2023 12:36 pm
Large Nonpareil Single Twist Horn Sold

Last post by rickd « Mon Jan 30, 2023 10:57 am
Replies: 2
by rickd » Mon Jan 30, 2023 10:10 am

First post

Large Nonpareil horn for a Speedster. Lots of patina; will need a good polishing or leave as is. $175.00+$22.00 usps shipping. Check or money order. Email me through this site. H1.jpg H2.jpg H3.jpg H4.jpg

Last post

Its yours Don. Let me know what address to ship it to. Thanks.

2 Replies

853 Views

Last post by rickd
Mon Jan 30, 2023 10:57 am
New E&J taillight

Last post by FATMAN « Mon Jan 30, 2023 9:46 am
Replies: 1
by Model T Tom » Mon Jan 30, 2023 8:44 am

First post

New Gilbert taillight that I was going to use on my speedster. I had the flair added because I thought it would look good on an early speedster.
$275.00 plus shipping
Tom Butterworth
772-475-9142

Last post

I will take it, Bob
sent e mail

1 Replies

829 Views

Last post by FATMAN
Mon Jan 30, 2023 9:46 am
FS gas pressure pump & pressure gauge

Last post by Model T Tom « Mon Jan 30, 2023 8:50 am

by Model T Tom » Mon Jan 30, 2023 8:50 am

Perfect Lunckerhimer pump works great pluse the nicest guage I have ever seen.
$500.00 plus shipping
Tom Butterworth
772-475-9142

0 Replies

761 Views

Last post by Model T Tom
Mon Jan 30, 2023 8:50 am
Speedometer drive with cable

Last post by Lawrence « Mon Jan 30, 2023 3:46 am
Replies: 2
by Larry LaPatka » Sun Jan 29, 2023 12:55 pm

First post

Original speedometer drive with gears and extra chain links
$300 plus shipping
L.Lapatka
Text: 423.237.8846
Email: ltlapatka@gmail.com

Last post

Hi larry, im interested if dan doesn't take it. Thanks Chris

2 Replies

1308 Views

Last post by Lawrence
Mon Jan 30, 2023 3:46 am
$$$$

Last post by ThreePedalTapDancer « Mon Jan 30, 2023 3:38 am
Replies: 18
by HornsRus » Wed Jan 09, 2019 10:30 pm

First post

on the old classifieds we had a spot to make donations, dont see it now. charley

Last post

Now even Charley would find this humorous.

8F198F5B-8527-4E89-8F89-250C3FCCAD0E.jpeg

18 Replies

8527 Views

Last post by ThreePedalTapDancer
Mon Jan 30, 2023 3:38 am
1927 2 door sedan body

Last post by Model T Matt « Sun Jan 29, 2023 9:12 pm
Replies: 1
by Model T Matt » Sun Jan 22, 2023 7:40 pm

First post

Up for Sale very nice 1927 sedan body -includes windshield frame,regulators,interior garnish mldgs,dash,seat frames, asking $2250.00 or offer ? give me a call 503-824-2681 Matt

Last post

Body and the chassis Sold -ended up less than 30 minutes from each other

1 Replies

852 Views

Last post by Model T Matt
Sun Jan 29, 2023 9:12 pm
Ruckstell Left Side Housing (only) FS

Last post by Dave Young « Sun Jan 29, 2023 3:27 pm
Replies: 2
by Dave Young » Sun Jan 29, 2023 9:42 am

First post

I have a perfectly good left side housing for sale. It needs to have a left tube stub installed into it. You could probably send it out to Chaffins and have them do that for you. $100 plus shipping. Located in Mays Landing, NJ. Best to text me at (609) 289-0677 . I can send you pictures of it that way.

Last post

The piece is sold.

2 Replies

1044 Views

Last post by Dave Young
Sun Jan 29, 2023 3:27 pm
Speedo parts

Last post by Larry LaPatka « Sun Jan 29, 2023 1:00 pm

by Larry LaPatka » Sun Jan 29, 2023 1:00 pm

The wheel gears will not load to this site for some reason but can email them to you

0 Replies

858 Views

Last post by Larry LaPatka
Sun Jan 29, 2023 1:00 pm
Want to Buy TIROMETER

Last post by Ratfink56 « Sun Jan 29, 2023 11:59 am
Replies: 8
by Ratfink56 » Sat Feb 20, 2021 1:53 pm

First post

I am looking for a Tirometer .It had a glass top on it so you could read the air pressure. Maybe someone has one lying around! s-l1600.jpg s-l160002.jpg

Last post

Still looking. Thank you

8 Replies

3866 Views

Last post by Ratfink56
Sun Jan 29, 2023 11:59 am
2 original lens

Last post by Divcoone « Sun Jan 29, 2023 11:40 am

by Divcoone » Sun Jan 29, 2023 11:40 am

1 clear and 1 red lens for oil lights. Has metal edge.$25.00 plus $12. priority mail. Personal check with hold. NO PAYPAL.
Bob Giles
divco100b@icloud.com

0 Replies

905 Views

Last post by Divcoone
Sun Jan 29, 2023 11:40 am
Holley G Pats Pending carburetor/sold

Last post by Corey Walker « Sun Jan 29, 2023 9:16 am
Replies: 3
by Corey Walker » Wed Jan 18, 2023 10:14 pm

First post

Completely disassembled and cleaned, new float, needle and seat, venturi, choke spring, spray needle and bushing for nice original throttle shaft. No cracks or splits in original brass bowl, nice original hardware and new old stock screws for the Pats Pending mixing chamber cover. Test run. $325 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

3 Replies

1313 Views

Last post by Corey Walker
Sun Jan 29, 2023 9:16 am
Stevens T-231 Drive Shaft Bushing Extractor

Last post by LOCParts « Sun Jan 29, 2023 12:01 am
Replies: 1
by LOCParts » Sat Jan 28, 2023 2:25 pm

First post

FS: Genuine Stevens NY driveshaft bushing extractor. This tool quickly and easily removes the bushing from the front end of a Model T drive shaft tube. This tool was included in the Stevens driveshaft overhaul tool set. The tool consists of the guide plate, extractor and the extractor nut. This tool is in very good condition, ready for use. $300...

Last post

The Stevens driveshaft bushing remover has been spoken for.

Thanks MTFCA!

1 Replies

871 Views

Last post by LOCParts
Sun Jan 29, 2023 12:01 am
1909 Kingston 5 Ball Carburetor

Last post by John W « Sat Jan 28, 2023 9:35 pm
Replies: 7
by GatorsModelT » Fri Jan 20, 2023 2:06 am

First post

1909 Kingston 5 Ball Carburetor. This model was used up to June of 1910. Is complete but has no float. No visible cracks.
Asking $1500.

Last post

This is a 1910 Carburetor. The numbers under 100,000 are 1909.

7 Replies

1936 Views

Last post by John W
Sat Jan 28, 2023 9:35 pm
FS 1908 early 1909 E & J tail light.

Last post by KimDobbins « Sat Jan 28, 2023 9:29 pm
Replies: 2
by KimDobbins » Wed Jan 25, 2023 5:13 pm

First post

Suitable for 1908 NRS or early 1909 T. This lamp has the small blue jewel instead of the large lens on the later tail lights. Also the patent pending top. These lamps were used for only a very short time. Very nice condition, $500.00 plus shipping. Kdmks AT att.net.

Last post

Back to top

2 Replies

1016 Views

Last post by KimDobbins
Sat Jan 28, 2023 9:29 pm
FS 1911 Kingston coil box

Last post by KimDobbins « Sat Jan 28, 2023 9:29 pm
Replies: 2
by KimDobbins » Thu Jan 26, 2023 10:06 pm

First post

For sale is a 1911 Kingston coil box with the original metal top coils. These metal top coils were only used in 1911 and this is the only one of these units I’ve ever seen. As you can see from the pictures, it’s very complete and in excellent condition. $1200.00 postpaid to lower 48 states. kdmks AT att.net.

Last post

Back to top

2 Replies

998 Views

Last post by KimDobbins
Sat Jan 28, 2023 9:29 pm
Wanted: 1916 closed car windshield screw and washer

Last post by RodellJunior « Sat Jan 28, 2023 8:37 pm

by RodellJunior » Sat Jan 28, 2023 8:37 pm

I am looking for the needle in the haystack. Here is a picture of the upper windshield hinge screw and washer on a 1916 sedan. They are missing on the opposite side. I believe these were used on the 1915 and 1916 closed cars.

The washer reads: JOS. N. SMITH & CO.
PAT. DEC. 15, 1914.

If you can help, send me an email or personal message through...

0 Replies

701 Views

Last post by RodellJunior
Sat Jan 28, 2023 8:37 pm
wtb Ball caps (4th. mains )

Last post by Gene_French « Sat Jan 28, 2023 8:26 pm
Replies: 4
by Gene_French » Mon Jan 16, 2023 10:04 am

First post

wanted to buy in quantity. Model T ball caps for re-babbitting ... prefer to buy in larger quantities to help reduce shipping ... can pickup at Chickasha swap meet in March ...Gene French gfrench1953@hotmail.com or 970-581-2808

Last post

to the top again ...thanks MTFCA

4 Replies

1139 Views

Last post by Gene_French
Sat Jan 28, 2023 8:26 pm

New Topic

9454 topics

Page 84 of 95
- Jump to page:
Previous
1
…
82
83
84
85
86
…
95
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum