Classifieds - Parts - Page 10

Classifieds - Parts

New Topic

9177 topics

Page 10 of 92
- Jump to page:
Previous
1
…
8
9
10
11
12
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79087 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Looking for an upper front wishbone

Last post by LittleTimmy52 « Mon May 12, 2025 7:41 pm

by LittleTimmy52 » Mon May 12, 2025 7:41 pm

I am looking for a wishbone for the front axle, the one that has a stud to go through the perch with s good ball and threads since mine has bad threads and a bad ball.

Thanks.

0 Replies

1048 Views

Last post by LittleTimmy52
Mon May 12, 2025 7:41 pm
F/S: Starter Switch **SOLD**

Last post by Moxie26 « Mon May 12, 2025 7:34 pm
Replies: 6
by jethro » Tue Apr 22, 2025 2:23 pm

First post

For Sale: Model T Starter Switch. $20.00 plus shipping.

R/S,
Jonathan Bodine

Last post

Jethro .... Starter switch arrived today by the USPS. Even though they had delays, it arrived intact and safe. Thank you again 😀 appreciate your help !

6 Replies

2462 Views

Last post by Moxie26
Mon May 12, 2025 7:34 pm
FOR SALE- GASIGNAL GIVES YOU A RESERVE TANK OF GAS NEW OLD STOCK IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Mon May 12, 2025 7:31 pm

by Jay In Northern Ca. » Mon May 12, 2025 7:31 pm

Here's a handy device that adds a stand pipe in the gas tank so when you run out of gas you pull the string and tie it off to get to the last of the gas in the tank.The one gallon of gas remaining below the stand pipe will get you on your way to a filling station. Asking $70 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT...

0 Replies

1041 Views

Last post by Jay In Northern Ca.
Mon May 12, 2025 7:31 pm
Who owns this car, seen at Luray? Bill Everett

Last post by Jim11787 « Mon May 12, 2025 5:26 pm
Replies: 1
by Bill Everett » Mon May 12, 2025 4:46 pm

First post

I would really like to talk with the owner of this car; does anyone know who it belongs to, and can you get me his e-mail address or phone?

Thank you.

Bill everett

Cell: 901-496-8795

Model T Touring Tim Wrenn color scheme.JPG

Last post

Sent you a private message.

1 Replies

876 Views

Last post by Jim11787
Mon May 12, 2025 5:26 pm
rear spring SOLD

Last post by RajoRacer « Mon May 12, 2025 4:17 pm
Replies: 3
by Melba Nolan » Fri May 02, 2025 11:52 am

First post

For sale: rear spring $125 plus postage
20220820_113535.jpg

Last post

Better if it had the eyelet clamps !

3 Replies

1438 Views

Last post by RajoRacer
Mon May 12, 2025 4:17 pm
WTB 1914 top socket

Last post by Art Ebeling « Mon May 12, 2025 3:30 pm
Replies: 7
by Art Ebeling » Thu Aug 08, 2024 7:48 am

First post

Want to buy a front top bow socket for a 1914 Runabout. I need the passenger side if there is a difference. Thanks, Art

Last post

Still looking

7 Replies

2022 Views

Last post by Art Ebeling
Mon May 12, 2025 3:30 pm
Bosch 3 gear mag drive

Last post by Kevin Pharis « Mon May 12, 2025 2:42 pm
Replies: 3
by Kevin Pharis » Sun May 11, 2025 1:22 pm

First post

Making room for bigger and better toys! Been saving this mag drive for parts as it has new idler and driven gears installed. Magneto mount is clearly homemade, but appears to be correct enough to function properly. Cover has the typical fan belt damage and welding. Housing has the typical grinding clearance from someone trying to make the wrong...

Last post

Hey John, it’s yours!

3 Replies

817 Views

Last post by Kevin Pharis
Mon May 12, 2025 2:42 pm
Misc.T Stuff

Last post by Model T Matt « Mon May 12, 2025 2:16 pm
Replies: 1
by Model T Matt » Fri May 09, 2025 10:00 pm

First post

Cleaning out shop - Ford Pliers,Band wrench,Wood wheel puller{new}-one headlamp lens -Apco Mtr. Mount-Open Car Clamp on rear view mirror asking $175.00 for the bundle shipped to your location -give me a call Matt 503-824-2681

Last post

Sold tire clamps out of pile so new price for parts is $140.00

1 Replies

979 Views

Last post by Model T Matt
Mon May 12, 2025 2:16 pm
wood wheels with hubs

Last post by Melba Nolan « Mon May 12, 2025 2:00 pm
Replies: 3
by Melba Nolan » Sat Nov 23, 2024 10:30 pm

First post

For sale: 2 wood wheels with hubs $150 each plus shipping
20241119_125544.jpg 20241119_125758.jpg 20241119_130014.jpg 20241119_130053.jpg

Last post

move to top

3 Replies

2230 Views

Last post by Melba Nolan
Mon May 12, 2025 2:00 pm
timing gear cover

Last post by Melba Nolan « Mon May 12, 2025 1:59 pm
Replies: 3
by Melba Nolan » Fri May 02, 2025 1:41 pm

First post

For sale: Timing gear cover for 19/25 $20 plus postage
20250324_175110.jpg 20250324_175118.jpg 20250324_175149.jpg

Last post

move to top

3 Replies

1053 Views

Last post by Melba Nolan
Mon May 12, 2025 1:59 pm
Stahl Magfixer

Last post by Melba Nolan « Mon May 12, 2025 1:58 pm
Replies: 1
by Melba Nolan » Fri May 02, 2025 5:22 pm

First post

For sale: Stahl Magfixer for model t $250 plus shipping
20250424_233225.jpg 20250424_233125.jpg 20250424_233145.jpg 20250424_233322.jpg

Last post

move to top

1 Replies

1509 Views

Last post by Melba Nolan
Mon May 12, 2025 1:58 pm
FS: Repop Brass Spider SOLD

Last post by Campbell Tellman « Mon May 12, 2025 10:34 am
Replies: 1
by Rodger Erickson » Wed May 07, 2025 11:12 pm

First post

SOLD: One reproduction brass spider, Fits a wood rim with approx 10 ID. Not brass plated steel, A magnet won't stick to it. Good quality casting. Asking $95 not including shipping.

tbspdr01.jpg

tbspdr02.jpg

tbspdr03.jpg

Thanks for looking!

Last post

I'll buy your spider!
Campbell Tellman II
1916 Ford Touring
252-528-0093
cjtellman @gmail.com

1 Replies

1263 Views

Last post by Campbell Tellman
Mon May 12, 2025 10:34 am
The Automotive Trade Directory Oct. 1919- Volume XVII- No. 4

Last post by henryford2 « Mon May 12, 2025 9:30 am

by henryford2 » Mon May 12, 2025 9:30 am

The Automotive Trade Directory Oct. 1919- Volume XVII- No. 4. Over 1,000 pages of interesting bathroom reading material! Binding is loose, some pages discolored, the color inserts appear to be all there but some are loose from the binding. Positive there is NO basement smell! $45 includes shipping in the CONUS...

0 Replies

894 Views

Last post by henryford2
Mon May 12, 2025 9:30 am
Complete 1914 running chassis

Last post by mklooksup « Mon May 12, 2025 8:49 am
Replies: 3
by Larry LaPatka » Sun May 11, 2025 8:52 pm

First post

I will be selling the complete detailed 1914 running chassis that was to be the chassis for the C Cab body. Radiator is great, new fuel tank, extra cherry firewall, coil box and coils, new tires, POR frame painted, high heat POR on exhaust system, detailed Hassler Bee-Hive shocks at all four corners, 14 original engine, all excellent sheetmetal...

Last post

Very interested

3 Replies

854 Views

Last post by mklooksup
Mon May 12, 2025 8:49 am
Rear Body Sill Plates 09-11

Last post by Mark Wing - NM « Sun May 11, 2025 11:05 pm
Replies: 1
by AZTerry » Sun May 11, 2025 6:08 pm

First post

One set of Original T Ford Rear Body Sill Plates for I believe a 09-11. $40 plus $11 USPS Flat Rate Padded Envelope.
Please use email option to respond.

Thank you,
Terry

Door Sills Rear 09_11b.jpg

Last post

Hello Terry,

I'd like to purchase your sill plates and just sent you an e-mail.

Thank you,
Mark Wing
Tin Lizzies of Albuquerque

1 Replies

604 Views

Last post by Mark Wing - NM
Sun May 11, 2025 11:05 pm
TT Rear Brake Drum

Last post by AZTerry « Sun May 11, 2025 9:24 pm

by AZTerry » Sun May 11, 2025 9:24 pm

TT Rear Axle Brake Drum. Appears to be in excellent condition. I measured the ID in three places with a digital caliper and it appears to be standard ID.
$40 plus shipping. Will not fit in USPS flat rate box. Provide zip code for shipping cost.

Please email through the forum.

NO PM's Please

Thank you,
Terry

TT Rear Drum 2.jpg

0 Replies

944 Views

Last post by AZTerry
Sun May 11, 2025 9:24 pm
N, R, S exhaust manifold

Last post by Fordnut « Sun May 11, 2025 12:05 pm
Replies: 1
by Abner1601 » Sun May 11, 2025 10:59 am

First post

I have an excellent used exhaust manifold for sale. Pipe threads are very good. No pitting. Not a repo.

Last post

Email sent

1 Replies

643 Views

Last post by Fordnut
Sun May 11, 2025 12:05 pm
Raw Castings for Sprint Car Magneto Side Drive $105

Last post by Ralph F « Sun May 11, 2025 10:47 am
Replies: 1
by Rodger Erickson » Sun May 11, 2025 10:26 am

First post

FS: Rough Aluminum castings for a bracket and timing cover, unmachined, for attaching a side drive magneto. The timing cover also has a boss for mounting a cam-driven oil pump. These were done probably 50-60 years ago and have been sitting ever since. Asking $105 not including Shipping.

tsddrv01.jpg

tsddrv02.jpg

tsddrv03.jpg...

Last post

I will take it
Fitz

1 Replies

616 Views

Last post by Ralph F
Sun May 11, 2025 10:47 am
Starting Spring Cleaning again !

Last post by Rick_Rice « Sun May 11, 2025 8:14 am
Replies: 8
by RajoRacer » Mon May 05, 2025 5:52 pm

First post

Annual time for clean out - full set of near ready to mount Hassler Pancake set w/new gr. 8 bolts & a few extra parts - $300 for the lot + the ride. Several sets of NOS Scandinavia lining sets - a couple original & a couple sets of CANTEX of the correct length & weave - $100 a set includes the ride in the U.S. I have a lot of chassis parts to...

Last post

Hi Steve,
I sent you both a message and email.

Kind Regards,
Rick Rice

8 Replies

1945 Views

Last post by Rick_Rice
Sun May 11, 2025 8:14 am
Pan ears early style SOLD

Last post by Steves Ts « Sun May 11, 2025 7:59 am
Replies: 1
by Tbird » Sat May 10, 2025 4:34 pm

First post

Have one pair of early style pan ears. Solid. Still has some of the pan that will need to be ground off.
$25 plus shipping

mikebird@lifeattheridge.net

IMG_3308.jpeg IMG_3309.jpeg

Last post

Hi Mike, I sent You an email .

Steve

1 Replies

642 Views

Last post by Steves Ts
Sun May 11, 2025 7:59 am
KR Wilson Pan Jig & Combination Machine

Last post by KiwiFordGuy « Sun May 11, 2025 7:27 am

by KiwiFordGuy » Sun May 11, 2025 7:27 am

I have had a change in direction and my Model T tool collection needs to be moved on.

KRW Pan Jig and tooling
KRW Combination Machine and all tooling etc
First option on smaller tools, KRW, Stevens etc will be offered to the purchaser of the big items. Don’t ask about the smalls, unless you’ve taken the big rigs. :P

Seems to be no serious...

0 Replies

1061 Views

Last post by KiwiFordGuy
Sun May 11, 2025 7:27 am
Steering Column Supports

Last post by Model T Matt « Sun May 11, 2025 12:08 am
Replies: 4
by Model T Matt » Fri May 09, 2025 10:04 pm

First post

Assortment of steering column supports castings need holes drilled some are Model T and some Model A asking $100.00 for all shipped to your location give me a Call Matt 503-824-2681

Last post

Mark got the Bunch Thanks

4 Replies

902 Views

Last post by Model T Matt
Sun May 11, 2025 12:08 am
Cylinder head water outlet early original SOLD

Last post by SurveyKing « Sat May 10, 2025 7:24 pm
Replies: 1
by Tbird » Sat May 10, 2025 4:49 pm

First post

This is an original water outlet for the 09-16 but is the replacement part that was sold by Ford dealers according to Gail Roddas book.

$60 plus shipping

mikebird@lifeattheridge.net

IMG_3313.jpeg IMG_3312.jpeg

Last post

Hi Mike,
I would like to purchase this if still available.
Shoot me an email please.

Dan

1 Replies

593 Views

Last post by SurveyKing
Sat May 10, 2025 7:24 pm
FOR SALE PARTING OUT MODEL T TOURING

Last post by GarJen127 « Sat May 10, 2025 7:16 pm
Replies: 6
by Dale_mcm » Fri Mar 07, 2025 12:49 am

First post

Will sell parts or one bundle price. Have an open valve engine complete with title and Benson Ford document showing as March 3 1911.
A new Ray Wells 1911 touring body complete with original hardware from a 1911 doner body. This body has floorboards, seat boards, and
a dashboard. Top sockets with bows, original old dashboard with all hardware for...

Last post

Do you have a chassis?

6 Replies

1803 Views

Last post by GarJen127
Sat May 10, 2025 7:16 pm
13-18 Tie rod yolk SOLD

Last post by Tbird « Sat May 10, 2025 4:56 pm

by Tbird » Sat May 10, 2025 4:56 pm

Tie rod yolk for 13-18. Very nice. Clean threads. Possibly NOS. $25 plus shipping
mikebird@lifeattheridge.net

IMG_3315.jpeg IMG_3314.jpeg

0 Replies

1072 Views

Last post by Tbird
Sat May 10, 2025 4:56 pm
FS DEMOUNTABLE BAND SET (SOLD)

Last post by South Park Zephyr « Sat May 10, 2025 4:55 pm
Replies: 3
by Mark Chaffin » Tue May 06, 2025 6:17 pm

First post

One very nice set of demountable bands for the 26/27 transmission. Ford script. Lugs show no sign of wear. Price for the set is $60.00 plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_145023.jpg

20250506_144943.jpg

Last post

Thanks Mark,
They arrived today

3 Replies

974 Views

Last post by South Park Zephyr
Sat May 10, 2025 4:55 pm
Cylinder head water outlet early style SOLD

Last post by Tbird « Sat May 10, 2025 4:45 pm

by Tbird » Sat May 10, 2025 4:45 pm

This a reproduction of the early style water head outlet 09-16
$50 plus shipping

mikebird@lifeattheridge.net

IMG_3311.jpeg IMG_3310.jpeg

0 Replies

927 Views

Last post by Tbird
Sat May 10, 2025 4:45 pm
Sale Ended - NH, Vaporizer, Simmons, Wizard, Duplex Carb restoration kit

Last post by Grntea « Sat May 10, 2025 3:43 pm
Replies: 2
by Scott_Conger » Mon May 05, 2025 1:27 pm

First post

Do the job once, and do it right!

What you get:

(1) The Original and Only - Full Flow Float Valve™ with lead washer
(1) Pair of high quality USA Made taps for float valve threads, needle valve threads, and jet threads
(1) Full Flow Float Valve™ Installation Tool
Free Shipping within contiguous United States

Available nowhere else

Offer valid...

Last post

Great deal Scott - wish you had been at Luray Swap meet!

2 Replies

1134 Views

Last post by Grntea
Sat May 10, 2025 3:43 pm
STROMBERG OD-1 Carburetor ZOOM GO FAST!

Last post by henryford2 « Sat May 10, 2025 9:52 am
Replies: 1
by henryford2 » Sat May 10, 2025 9:51 am

First post

As found. Float is present, as is choke horn (missing band ). Includes an adapter flange to rotate the orientation of the flange. Working condition unknown, good candidate for rebuild or parts. $150 includes shipping in the CONUS

Last post

some more pictures:

1 Replies

571 Views

Last post by henryford2
Sat May 10, 2025 9:52 am
FS FRONT WHEEL BEARINGS (SOLD)

Last post by Mark Chaffin « Sat May 10, 2025 9:45 am
Replies: 2
by Mark Chaffin » Tue May 06, 2025 6:10 pm

First post

One set of very good used Timken outer front wheel bearings. Price WAS $50 NOW $40 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_125348.jpg

20250506_125400.jpg

Last post

Going to Dean. Thank you

2 Replies

963 Views

Last post by Mark Chaffin
Sat May 10, 2025 9:45 am
WTB 26-27 Doors, Damaged or Rusted bottom

Last post by Brian D « Sat May 10, 2025 5:08 am
Replies: 2
by Brian D » Tue Apr 29, 2025 8:56 am

First post

I'm looking for a set of rear doors for a 26-27 Fordor. Hoping to locate a pair that are damaged or rusted on the bottom. Not going to ruin good doors. Need to cut off bottom 4-5 inches for a snowmobile project. I'll be in Luray and Hersey.
Brian 586-864-5110.

Last post

Back to top.

2 Replies

1079 Views

Last post by Brian D
Sat May 10, 2025 5:08 am
FOR SALE 2-- 26-7 Chassis'

Last post by GarJen127 « Fri May 09, 2025 10:37 pm
Replies: 7
by Burlingtontguy » Wed Nov 27, 2024 10:45 am

First post

I have parts to assemble 2-- 26-7 Chassis', at this time it is apart to be picked up easier and stored. Located in Ct 06013 Delivery available for cost of fuel within 100 miles. $3500 EACH,. E-mail with interest or E-mail phone # and I will call you back, Thanks, Dennis

Last post

do you have any pictures?

7 Replies

8647 Views

Last post by GarJen127
Fri May 09, 2025 10:37 pm
FS Brass Stewart Warner Horn (SOLD)

Last post by dinosbunny « Fri May 09, 2025 9:01 pm
Replies: 2
by ThreePedalTapDancer » Fri May 09, 2025 8:01 pm

First post

Original polished brass Stewart Warner horn. Excellent condition. No damage or dents in bell, emits a very loud “Aaaaawhooo!” When hand plunger is depressed. Beautiful horn, ready to mount and use. 300 includes shipping.

IMG_3550.jpeg

Last post

Hi Ed, I would like to purchase the horn. Let me know how you would like payment. Also sent you a PM thanks.

2 Replies

640 Views

Last post by dinosbunny
Fri May 09, 2025 9:01 pm
11 tooth pinion

Last post by Chris B « Fri May 09, 2025 3:47 pm
Replies: 1
by Melba Nolan » Fri May 09, 2025 12:03 am

First post

For sale: 11 tooth pinion $50 plus postage

20230318_174230.jpg 20230318_174425.jpg 20230318_174304.jpg

Last post

Hello, I will take the 11T Pinion,
how do I go about paying you for it?
Thanks, Chris Barker

1 Replies

650 Views

Last post by Chris B
Fri May 09, 2025 3:47 pm
For Sale: Rear Fenders for Truck or Trailer

Last post by William Rathert « Fri May 09, 2025 12:29 am
Replies: 4
by Ed Fuller » Fri Apr 25, 2025 5:37 pm

First post

Here is a pair of rear fenders that came with a bunch of TT parts. They would work good on an aftermarket style truck bed or even a homemade trailer. I’m not an expert, but they appear similar to Martin Parry style.

They are very heavy and have a bead of metal fastened to the outer edge. They have some rust pitting. See pictures for...

Last post

If still available,I'll take the, Thanks,, Bill

4 Replies

1380 Views

Last post by William Rathert
Fri May 09, 2025 12:29 am
WTB 26/27 Roadster hip panel retention trim

Last post by JonLevine « Fri May 09, 2025 12:29 am

by JonLevine » Fri May 09, 2025 12:29 am

I am looking for a pair of hip panel retention trim pieces for a 26/27 roadster. I have attached photos of these parts I found on the forum for reference.

Thanks!

Jon Levine

IMG_7489.jpeg IMG_7354.jpeg

0 Replies

1003 Views

Last post by JonLevine
Fri May 09, 2025 12:29 am
Refurbished Key Switches Available

Last post by RajoRacer « Thu May 08, 2025 7:43 pm

by RajoRacer » Thu May 08, 2025 7:43 pm

Since Ben was under the weather , I went through some of my better key switches - I have a few originals available & 1 repro - a couple have good ammeters & new, best quality backs.

I can post a few photos tomorrow. Drop me a note through the Forum unless you already have my email.

0 Replies

1217 Views

Last post by RajoRacer
Thu May 08, 2025 7:43 pm
FS TAIL LIGHT / LICENSE PLATE BRACKET (SOLD)

Last post by Mark Chaffin « Thu May 08, 2025 11:55 am
Replies: 1
by Mark Chaffin » Mon May 05, 2025 10:02 pm

First post

One tail light / license plate bracket. Price is $25.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_164124.jpg

Last post

Pending sold to John.

1 Replies

929 Views

Last post by Mark Chaffin
Thu May 08, 2025 11:55 am
FS SHACKLE SET (SOLD)

Last post by Mark Chaffin « Thu May 08, 2025 11:48 am
Replies: 2
by Mark Chaffin » Tue May 06, 2025 6:13 pm

First post

One set of used Ford script shackles in good condition. Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_130326.jpg

Last post

Going to Doug. Thank you

2 Replies

939 Views

Last post by Mark Chaffin
Thu May 08, 2025 11:48 am
FS EARLY FRONT MOTOR MOUNT (SOLD)

Last post by Mark Chaffin « Thu May 08, 2025 11:47 am
Replies: 2
by Mark Chaffin » Tue May 06, 2025 7:15 pm

First post

One more early front motor mount complete. Price is $45.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_160051.jpg

Last post

Sold to Doug. Thank you

2 Replies

820 Views

Last post by Mark Chaffin
Thu May 08, 2025 11:47 am
Ford Victor Model 2 side lights

Last post by Dan jensen « Thu May 08, 2025 11:10 am
Replies: 7
by Dan jensen » Sat Apr 26, 2025 10:08 am

First post

Unrestored pair of Victor Model 2 side lights with brackets. The glass is good with no cracks or chips. The light for the right side has a shallow dent in the metal panel. Price is $175 plus shipping. Please send me an email.
20250425_205315.jpg
20250425_205407.jpg
20250425_205504.jpg

Last post

Sold to Phillip pending payment.

7 Replies

2406 Views

Last post by Dan jensen
Thu May 08, 2025 11:10 am
FS EARLY FRONT WHEEL BALL BEARING SET

Last post by Mark Chaffin « Wed May 07, 2025 10:51 pm
Replies: 3
by Mark Chaffin » Tue May 06, 2025 6:19 pm

First post

One set of early front wheel ball bearings and races. These are used and are being sold as a parts assortment. Accordingly, price for all is $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_131552.jpg

Last post

Going to Kurt. Thank you

3 Replies

1059 Views

Last post by Mark Chaffin
Wed May 07, 2025 10:51 pm
WTB: 1912 Fender eye bolts front/back

Last post by RajoRacer « Wed May 07, 2025 7:42 pm
Replies: 6
by michaelb2296 » Wed May 07, 2025 11:40 am

First post

I need 4 fender eye bolts for my 1912 torpedo
Thanks,
Michael

Last post

I sold my last bunch to a fella doing up a '13 Touring.

6 Replies

1010 Views

Last post by RajoRacer
Wed May 07, 2025 7:42 pm
Allen Electric HCCT

Last post by Bill Everett « Wed May 07, 2025 5:09 pm
Replies: 1
by Schrep771 » Tue May 06, 2025 8:38 pm

First post

FS. Allen Electric HCCT. Ready for clean up or restoration. Rotates smoothly. Have not checked for spark. Base has a corner broken. See pics for details. $550. Can deliver to Luray.
Nyschreps@yahoo.com
Thank You.

Last post

E-mail sent.

1 Replies

863 Views

Last post by Bill Everett
Wed May 07, 2025 5:09 pm
FS EARLY HEADLAMP FORK SET (SOLD)

Last post by Mark Chaffin « Wed May 07, 2025 10:12 am
Replies: 1
by Mark Chaffin » Tue May 06, 2025 6:11 pm

First post

One set of brass reproduction early headlamp forks in used condition. Price is $75.00 plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_112802.jpg

Last post

Going to Kevin. Thank you

1 Replies

714 Views

Last post by Mark Chaffin
Wed May 07, 2025 10:12 am
FS FORD FAITHFUL OILER (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 9:19 pm
Replies: 1
by Mark Chaffin » Tue May 06, 2025 6:15 pm

First post

One original Ford Faithful oiler set for the four dip pan. Set is in very good condition. Price is $60.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_144652.jpg

Last post

Sold to Shannon. Thank you

1 Replies

781 Views

Last post by Mark Chaffin
Tue May 06, 2025 9:19 pm
Phinney-Walker brass dash clock SOLD

Last post by BigAl « Tue May 06, 2025 8:11 pm
Replies: 1
by Layden Butler » Mon May 05, 2025 4:31 pm

First post

All brass clock runs when shaken, no cracks or dents. No dents or cracks,

Last post

Email Sent regarding your clock. AL

1 Replies

879 Views

Last post by BigAl
Tue May 06, 2025 8:11 pm
FS Hand Crank Fire Truck Siren

Last post by ThreePedalTapDancer « Tue May 06, 2025 7:18 pm
Replies: 4
by ThreePedalTapDancer » Fri Mar 28, 2025 4:05 pm

First post

No longer available

Last post

425, very loud nice siren

4 Replies

2558 Views

Last post by ThreePedalTapDancer
Tue May 06, 2025 7:18 pm
U & J Carburetor throttle shafts offer withdrawn as planned

Last post by Henry K. Lee « Tue May 06, 2025 3:41 pm
Replies: 4
by Scott_Conger » Wed Apr 30, 2025 2:56 pm

First post

I am set up to run U & J Throttle Shafts, since I am restoring a pair right now.

For anyone interested, I will make some for sale, as requests come in... I will not stock them nor custom make them in the future.

My equipment will remain set up for 1 week and no longer to allow for responses, and will remain so only so long as to fill any orders,...

Last post

Scott,

I am writing new chapters in my life and none of it has to do with cars!

Hank

4 Replies

1692 Views

Last post by Henry K. Lee
Tue May 06, 2025 3:41 pm
FS EARLY FRONT MOTOR MOUNT (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:50 pm
Replies: 3
by Mark Chaffin » Mon May 05, 2025 9:50 pm

First post

One early front motor mount complete $45.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250505_164020.jpg

Last post

Sold to Tim. Thank you

3 Replies

723 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:50 pm
FS EARLY DRIVESHAFT SPOOL (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:36 pm
Replies: 1
by Mark Chaffin » Mon May 05, 2025 9:48 pm

First post

Early driveshaft spool in very good condition. Price is $45.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_163258.jpg

20250505_163314.jpg

Last post

Sold to Dean. Thank you

1 Replies

693 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:36 pm
FS WINFIELD MANIFOLD (PENDING SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:34 pm
Replies: 4
by Mark Chaffin » Mon May 05, 2025 9:59 pm

First post

One very nice Winfield manifold. Price is $100 plus $8.50 domestic shopping. Mark Chaffin (951)805-0928

20250505_164240.jpg

Last post

Pending sold.

4 Replies

915 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:34 pm
Wanted Delco 5195 Two Cap Distributor

Last post by rendo « Tue May 06, 2025 1:17 pm
Replies: 3
by Chris Haynes » Sun May 04, 2025 9:28 pm

First post

I am searching for a Delco 5195 Two Cap Distributor. Originally used on four cylinder Stutz and other makes. image.jpg

Last post

You do not need one. The mount on the engine is for a standard magneto.
John

3 Replies

872 Views

Last post by rendo
Tue May 06, 2025 1:17 pm
FS EARLY SPINDLE ARMS (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:14 pm
Replies: 1
by Mark Chaffin » Mon May 05, 2025 9:53 pm

First post

Two very vice early front spindle arms. Price for the pair is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_163710.jpg

20250505_163717.jpg

Last post

Sold to Mike. Thank you

1 Replies

679 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:14 pm
FS EARLY TIMING COVER (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:10 pm
Replies: 2
by Mark Chaffin » Mon May 05, 2025 9:57 pm

First post

One very good early front timing cover. Price is $45.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_163416.jpg

Last post

Several Inquiries. Going to Dean for expressing first interest. Thank you.

2 Replies

770 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:10 pm
FS 10 TOOTH PINIONS (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 1:06 pm
Replies: 1
by Mark Chaffin » Mon May 05, 2025 9:46 pm

First post

I have two very good 10 tooth pinions with Ford script. Price is $75.00 each plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_142031.jpg

20250505_142053.jpg

Last post

Sold to Larry. Thank you

1 Replies

623 Views

Last post by Mark Chaffin
Tue May 06, 2025 1:06 pm
FS UNIVERSAL JOINT (SOLD)

Last post by Mark Chaffin « Tue May 06, 2025 12:50 pm
Replies: 1
by Mark Chaffin » Mon May 05, 2025 9:55 pm

First post

One very good Ford script universal joint. Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250505_163456.jpg

Last post

Sold to Larry. Thank you

1 Replies

639 Views

Last post by Mark Chaffin
Tue May 06, 2025 12:50 pm
Rayfield Accessory Thermostat

Last post by MNToys « Tue May 06, 2025 8:50 am
Replies: 3
by MNToys » Mon Feb 24, 2025 12:42 pm

First post

Very cool accessory thermostat. Looks to have some sort of diaphragm attached to some flaps that direct coolant one way then the other. Made of brass- this would look great on a period speedster or in the display cabinet.
Asking $150 shipped CONUS
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

IMG_2249.jpeg

IMG_2248.jpeg

IMG_2247.jpeg

Last post

Bump to the top

3 Replies

1252 Views

Last post by MNToys
Tue May 06, 2025 8:50 am
APCO Accessory oil level gauge

Last post by MNToys « Tue May 06, 2025 8:49 am
Replies: 3
by MNToys » Mon Feb 24, 2025 12:35 pm

First post

Neat oil level gauge with a cork float that pushes up a wire to see your oil level. I’ve never used it, but it should work as designed.
Asking $85 shipped CONUS.
Thanks,
Nick
PSUNicholas@yahoo.com
551 427 1593

IMG_2246.jpeg

IMG_2245.jpeg

Last post

Bump to the top

3 Replies

1432 Views

Last post by MNToys
Tue May 06, 2025 8:49 am
WTB 1910 gas tank

Last post by Nikko012 « Mon May 05, 2025 9:42 pm
Replies: 4
by Nikko012 » Thu May 01, 2025 7:14 am

First post

Looking for a new repo or original 1910 gas tank

Last post

Found a tank. Thanks

4 Replies

1297 Views

Last post by Nikko012
Mon May 05, 2025 9:42 pm
F/S: Eisenmann Magneto

Last post by jethro « Mon May 05, 2025 7:49 pm
Replies: 1
by jethro » Fri May 02, 2025 9:30 pm

First post

For sale is an Eisenmann Magneto. Very nice, complete and very heavy unit. Type GS. Serial number 887960. Gear drive unit, appears to be very complete. Turns smoothly. Cap extraordinary with a couple of small chips. $425.00 plus shipping, of course I will accept more.

R/S,
Jonathan Bodine

Last post

Back to the top

1 Replies

1068 Views

Last post by jethro
Mon May 05, 2025 7:49 pm
FOR SALE - BRASS DUST COVER SET FOR RUBBER STEM INNER TUBES BRAND NEW!

Last post by 1925 Touring « Mon May 05, 2025 7:31 pm
Replies: 1
by Jay In Northern Ca. » Mon May 05, 2025 7:02 pm

First post

These newly manufactured covers thread onto rubber valve stem tire tubes and are for wood wheels only. They will give your T that original Look. I bought these a while ago for a speedster project that I abandoned. (Vendor list price on these is $26.95 each). I am offering this set of four for $80 plus postage. .PLEASE INQUIRE VIA EMAIL THROUGH THE...

Last post

Email sent.

1 Replies

638 Views

Last post by 1925 Touring
Mon May 05, 2025 7:31 pm
Restored Holley G carb and a high-flow aluminum intake

Last post by Bruce Compton « Mon May 05, 2025 7:27 pm
Replies: 4
by Bruce Compton » Tue Apr 15, 2025 5:25 pm

First post

Restored Holley G, asking $225.00 and a very nice high-flow aluminum intake manifold, asking $120.00 , both including shipping to Cont. USA and Canada

Last post

Holley G and aluminum intake are sold. Thanks MFTCA.

4 Replies

2775 Views

Last post by Bruce Compton
Mon May 05, 2025 7:27 pm
Luray Vendors...Are you bringing any of these?

Last post by Bill Everett « Mon May 05, 2025 6:51 pm
Replies: 1
by Bill Everett » Sun Apr 27, 2025 1:08 pm

First post

Model T Whitewall Tire 30X3.jpeg

Are you bringing any of this type tire to Luray? I need two (2) 30 x 3.

If you have a couple of them, or even one, please let me know so I can plan to come.

Thank you.

Bill Everett

Last post

Please, anyone have these?

1 Replies

1518 Views

Last post by Bill Everett
Mon May 05, 2025 6:51 pm
FS: Dunn type Crankshaft Counter weights

Last post by WaltM « Mon May 05, 2025 1:55 pm
Replies: 4
by WaltM » Thu Mar 21, 2024 11:20 am

First post

For sale Complete set of Dunn type crankshaft counter weights. Weights are unmarked. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

4 Replies

1838 Views

Last post by WaltM
Mon May 05, 2025 1:55 pm
(SOLD) Oil Pan Support Bracket

Last post by WaltM « Mon May 05, 2025 1:53 pm
Replies: 2
by WaltM » Tue Aug 27, 2024 1:42 pm

First post

For Sale oil pan support bracket (belly bracket). Pat. Nov. 15, 1921. Nice accessory to carry on the road, if an oil pan ear breaks. Fits under the pan and hooks on the frame rails. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

2 Replies

4016 Views

Last post by WaltM
Mon May 05, 2025 1:53 pm
FS: Two Headlamp Lenses….

Last post by George House « Mon May 05, 2025 1:24 pm
Replies: 1
by George House » Fri May 02, 2025 9:42 am

First post

…. non Ford T. Lens on left is 8 1/8” diameter. Chip on bottom is covered by lamp rim. States: Type A Brooklyn NY
..and: PATENTED IN USA AND CANADA….lens on right is
8 1/4” diameter. States: CONAPHORE and US Patents Issued pending.. + careful bubble wrap packaging and USPS Medium Flat Rate. gwhouse731(at)gmail(dot)com

Last post

We’ll then, how about $30 for both ?

1 Replies

1141 Views

Last post by George House
Mon May 05, 2025 1:24 pm
FS Hand Crank Siren

Last post by ThreePedalTapDancer « Mon May 05, 2025 11:58 am
Replies: 5
by ThreePedalTapDancer » Mon Mar 10, 2025 3:17 pm

First post

Very nice early hand crank siren. Nice paint, very clean. Well made, with steel precision internal gears. Heavy duty construction. Works great. Very loud wail. Perfect for waking up texting drivers at the intersection. Has push button brake to stop siren at will. Includes cast mounting bracket. 10 inches from handle to front of bell. Bell diameter...

Last post

400 includes shipping.

5 Replies

2762 Views

Last post by ThreePedalTapDancer
Mon May 05, 2025 11:58 am
2 starters FS-ONE LEFT-delivery to Luray

Last post by love2T's « Mon May 05, 2025 10:45 am
Replies: 6
by love2T's » Tue Apr 29, 2025 10:30 am

First post

2 -- 6V starters FS. As described one motors a bit slower. Could just need a good cleaning. Can be delivered to Luray with Joe Bell. $100 for the fast one , $75 for the slow one . Selling for a friend. Prefer PayPal but can send a check if it gets here in time. Still waiting 2 weeks for another fellas check for another product. Our mail here...

Last post

Okay guys...slower starter left to sell...Likely rebuildable I would think. I'm taking a tank to Joe Bell's on Wednesday so only til Tuesday evening to grab this! Would love to dispose of it for my friend.

6 Replies

1691 Views

Last post by love2T's
Mon May 05, 2025 10:45 am
FS--2 HEADS-delivery to LURAY

Last post by love2T's « Mon May 05, 2025 10:42 am
Replies: 10
by love2T's » Tue Apr 22, 2025 8:49 am

First post

Selling for a friend! 2 very nice heads...green is '26, black is '24. He replaced them with HC heads is why they're available. $100 EACH plus shipping or wait til Oct when they likely can be delivered by another friend there. PayPal preferred. Our mail is extremely unreliable anymore. Already waiting for a lost check from one of my own sales....

Last post

Okay..last chance...I'll be taking an acetylene tank to Joe Bells on Wednesday so only today or tomorrow left to grab a nice head! Someone out there wants to save $75 shipping! If not then only other opportunity will be clear til October Hershey meet. Really wanna dispose of these for my friend!
Thanks.

10 Replies

2854 Views

Last post by love2T's
Mon May 05, 2025 10:42 am
wanted: set of 1928 windshield stanchions

Last post by BrassTee1914 « Mon May 05, 2025 10:40 am
Replies: 2
by fordrelic » Tue Apr 29, 2025 1:38 pm

First post

Wanted: Set of model A roadster windshield stanchions for 1928/29.
Patina or light pitting okay.

Thanks, Clay

Last post

I have 2 original stanchions if you need.

2 Replies

1042 Views

Last post by BrassTee1914
Mon May 05, 2025 10:40 am
FS: Three 30 x 3 Firestones -- Luray Delivery -- still in wrappers.

Last post by Grntea « Mon May 05, 2025 1:20 am
Replies: 1
by Walter Higgins » Sun May 04, 2025 1:13 pm

First post

Edited ad to correct quantity: 3

30 x 3 Firestones, ordered as spares and never used. Stored away from the sunlight in a garage their whole life. Date on the shipping sticker is 2013.

$175 each or all three for $450. Delivery to Luray or local pickup at 17350 near Gettysburg, PA. No shipping for these. Message me through the forum by p.m. or...

Last post

Walter - pm sent

1 Replies

807 Views

Last post by Grntea
Mon May 05, 2025 1:20 am
What I could bring to Luray

Last post by Grntea « Mon May 05, 2025 1:10 am
Replies: 1
by mklooksup » Sun May 04, 2025 5:22 pm

First post

I have these parts I'm willing to bring to the Luray swap meet if you are interested.

New set of 26 27 Floorboards
Painted black 26 27 front and rear fenders and splash aprons
5 black powder coated 27 wire rims

4 Hayes wire rims in primer with hub caps
5 Buffalo wire wheels with spare tire carrier and hubs painted red

Very nice green 1915...

Last post

Sent you a text

1 Replies

765 Views

Last post by Grntea
Mon May 05, 2025 1:10 am
Parts orders delivered to Luray Swap Meet

Last post by Tparts « Sun May 04, 2025 11:03 pm

by Tparts » Sun May 04, 2025 11:03 pm

Free delivery of parts orders to Luray Va Swap Meet need to by made by this coming Tuesday May 6th (5 pm)
Lang’s 1-800-872-7871

0 Replies

1202 Views

Last post by Tparts
Sun May 04, 2025 11:03 pm
1926 TT Rear Axle with Bennett Brakes and Warford

Last post by 1926TTExpress « Sun May 04, 2025 9:52 pm

by 1926TTExpress » Sun May 04, 2025 9:52 pm

I have the rear axle from a 1926 TT that has the Bennett mountain brakes. I am missing the special brake pedal and linkage arm as well as the connecting rods. If anyone has any of the parts that I'm missing, please contact me so the setup can be complete. I also have the front axle, the Warford transmission, gas tank and steering column. Asking...

0 Replies

1206 Views

Last post by 1926TTExpress
Sun May 04, 2025 9:52 pm
FS: Leaf Spring Lubricators

Last post by WaltM « Sun May 04, 2025 7:26 pm

by WaltM » Sun May 04, 2025 7:26 pm

For sale leaf spring spreaders and lubricators. Left one is made by Tomahawk Mfg Co PAT. OCT. 17 16. Right one made by Charles W. Manzel Co.. Price $80 each plus shipping. Take the weight of the vehicle off the springs, tap the tool in between the individual leaves. Twist the handle to force graphite grease between the leaves (grease not...

0 Replies

1254 Views

Last post by WaltM
Sun May 04, 2025 7:26 pm
WTB Used Universal T Driver 3 1/2 x 30

Last post by Woody23 « Sun May 04, 2025 9:03 am

by Woody23 » Sun May 04, 2025 9:03 am

I’m working through a front end issue and don’t want to out new tires in the process so hoping I could find a decent Universal T driver 3 1/2 x 30.

Thanks

David

0 Replies

1189 Views

Last post by Woody23
Sun May 04, 2025 9:03 am
FS: '17-'23 Fenders, Hood, Shell, Turtle -- Luray Delivery -- NOS, exc. orig., and repro.

Last post by Walter Higgins « Sat May 03, 2025 9:31 pm

by Walter Higgins » Sat May 03, 2025 9:31 pm

As mentioned in the subject, I'm selling an assortment of very nice sheet metal that was purchased for a 1920 roadster project that never materialized. All of it is very much above average. There are a few photos below. Email or PM me through my profile with your email address and I'll send you a link to an album where you can see all the photos...

0 Replies

1389 Views

Last post by Walter Higgins
Sat May 03, 2025 9:31 pm
FS: 21" wood wheels with rims and tires -- Luray Delivery

Last post by Walter Higgins « Sat May 03, 2025 9:14 pm

by Walter Higgins » Sat May 03, 2025 9:14 pm

Luray delivery available.

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver....

0 Replies

1354 Views

Last post by Walter Higgins
Sat May 03, 2025 9:14 pm
Thordarson Transformer (COIL)

Last post by Melba Nolan « Sat May 03, 2025 5:59 pm
Replies: 2
by Melba Nolan » Fri May 02, 2025 6:30 pm

First post

For sale: Thordanson Transformer $75 plus shipping
20250428_185339.jpg 20250428_185259.jpg 20250428_185317.jpg

Last post

ok I couldn't find on exactly like it.

2 Replies

1172 Views

Last post by Melba Nolan
Sat May 03, 2025 5:59 pm
fun products coil tester wtb

Last post by 23ford « Sat May 03, 2025 5:00 pm
Replies: 1
by 23ford » Tue Apr 22, 2025 10:41 pm

First post

?looking for the small coil tester that fun projects produced..........thank you

Last post

to top please help

1 Replies

1659 Views

Last post by 23ford
Sat May 03, 2025 5:00 pm
KR Wilson Combination Machine

Last post by Chris Haynes « Sat May 03, 2025 1:56 pm
Replies: 1
by Dennis Fleming » Sat May 03, 2025 6:58 am

First post

I will have this for sale at Luray
Mid Atlantic Pre War Swap Meet.
6 days away!!!! IMG_1281.jpeg IMG_1282.jpeg IMG_1287.jpeg IMG_1284.jpeg

Last post

I also have one. No idea how to use it or what to do with it.

1 Replies

1010 Views

Last post by Chris Haynes
Sat May 03, 2025 1:56 pm
Prest-O-Lite regulator for tank F/S

Last post by Layden Butler « Sat May 03, 2025 1:45 pm

by Layden Butler » Sat May 03, 2025 1:45 pm

This regulator fits all 6 diameter tanks. $95 including 48 state shipping.

0 Replies

1267 Views

Last post by Layden Butler
Sat May 03, 2025 1:45 pm
FS Babbitt/Boring Equipment....., ALL SOLD!!!!!

Last post by Henry K. Lee « Sat May 03, 2025 7:43 am
Replies: 19
by Henry K. Lee » Mon Jan 27, 2025 2:54 pm

First post

Gene French heavy for doing A cranks in a T block or just T cranks, high dollar carbide cutters, multiple rod molds (A & T), main molds (A & T), pounds of babbitt and solder for tinting, manuals, penning/scraping/ladle tools, $2,000.00 and a beautiful original KR Wilson stock dimension T crank ream $500.00. Don't ask how much to ship...., no clue!...

Last post

KR Wilson ream is SOLD!

Hank

19 Replies

9145 Views

Last post by Henry K. Lee
Sat May 03, 2025 7:43 am
carb top SOLD

Last post by Melba Nolan « Sat May 03, 2025 12:09 am
Replies: 2
by Melba Nolan » Fri May 02, 2025 6:53 pm

First post

For sale: NH carb top $25 plus postage
20250416_110344.jpg 20250416_110312.jpg

Last post

It is yours. Send me your information. melbanolan@aol.com

2 Replies

1017 Views

Last post by Melba Nolan
Sat May 03, 2025 12:09 am
Fordson Babbitting tools.

Last post by Dan Hatch « Fri May 02, 2025 10:59 pm
Replies: 2
by Temple2426 » Fri May 02, 2025 9:22 am

First post

I am looking for any Fordson tractor engine rebuilding tools, especially babbitting tools. I am also looking for the KR Wilson engine stand adapter for the Fordson tractor engine. Please let me know what you have for sale. I'll be at Luray and can pick up there or can arrange shipping at my cost. Six zero one Nine four one zero five three eight....

Last post

Dave is it for the Fordson? I would like to see a picture of that, not wanting it just never seen one.
I sold all my Fordson Babbitt tooling. Not much demand for that around here.

2 Replies

978 Views

Last post by Dan Hatch
Fri May 02, 2025 10:59 pm
For Sale New Rootlieb fenders

Last post by Tlight « Fri May 02, 2025 9:07 pm

by Tlight » Fri May 02, 2025 9:07 pm

For sale 2 (two) front fenders by Rootlieb, 1914 front fenders, never been installed, have been prepped and primed. Will have them at Luray, VA. swap meet for pick up. $850.00 firm.

0 Replies

1583 Views

Last post by Tlight
Fri May 02, 2025 9:07 pm
FOR SALE - EAGLE TIMER AND ROTOR NEW OLD STOCK IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Fri May 02, 2025 8:46 pm
Replies: 4
by Jay In Northern Ca. » Mon Apr 28, 2025 9:28 pm

First post

New never used in the original box.One box flap is loose. Asking $45 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! eagle timer 1.jpg eagle timer 2.jpg eagle timer 3.jpg eagle timer 4.jpg eagle timer 5.jpg

Last post

Sold to Rich!

4 Replies

1557 Views

Last post by Jay In Northern Ca.
Fri May 02, 2025 8:46 pm
WTB - Atlas water pump - found

Last post by ewdysar « Fri May 02, 2025 5:34 pm
Replies: 7
by ewdysar » Mon Apr 28, 2025 6:29 pm

First post

I'm looking for an Atlas water pump, as seen in this photo:
Atlas water pump.png

Does anybody have one gathering dust on the shelf?

Keep crankin',
Eric

Last post

The Atlas is in my hands. Thanks Hank! On to the next challenge...

Keep crankin',
Eric

7 Replies

2674 Views

Last post by ewdysar
Fri May 02, 2025 5:34 pm
WTB Early Pliers, Part No. T 1903

Last post by BigAl « Fri May 02, 2025 4:54 pm
Replies: 108
by BigAl » Mon Sep 18, 2023 12:47 pm
1

2
First post

The last tool I need to complete my 1911 Tool Kit! Thank you MTFCA and Bob for helping me with finding and buying the other two tools I needed. The following picture is the T 1903 Pliers I am looking for. Any help or leads will be great fully appreciated. 1911 T 1903 PLIERS - 091523.JPG

Last post

Try it again!
108 Replies

133860 Views

Last post by BigAl
Fri May 02, 2025 4:54 pm
steering support SOLD

Last post by Melba Nolan « Fri May 02, 2025 4:49 pm
Replies: 2
by Melba Nolan » Fri May 02, 2025 3:39 pm

First post

For sale: solid BRASS steering column support for 09/23 $75 plus postage
20250502_124344.jpg

Last post

sold pending payment

2 Replies

1819 Views

Last post by Melba Nolan
Fri May 02, 2025 4:49 pm
WTB: 26/27 roadster used upholstery

Last post by Henry K. Lee « Fri May 02, 2025 2:24 pm
Replies: 1
by frontyboy » Thu May 01, 2025 11:47 pm

First post

If you have the backrest upholstery and seat cushion covers used I am interested in buying . This is for a low budget project for a man with some health issues and limited funds. Need not be perfect just able to be reinstalled in his project.

I'm trying to help out an older very ill dedicated model t guy, he disparately wants to get this finished...

Last post

No disrespect to anyone but...., Limited funds, Health issues, Elderly person, and you are his friend trying to help out is about a ridiculous statement. You have known as much as you monitor this forum and weigh in that there is a good 6 months plus waiting list on a seat kit. And you have insulted me on offers for my cars so no bleeding heart...

1 Replies

956 Views

Last post by Henry K. Lee
Fri May 02, 2025 2:24 pm
front fender brace

Last post by Melba Nolan « Fri May 02, 2025 1:46 pm

by Melba Nolan » Fri May 02, 2025 1:46 pm

For sale: front fender brace (bracket) for 26/27 $20 plus shipping
20250325_182315.jpg

0 Replies

1229 Views

Last post by Melba Nolan
Fri May 02, 2025 1:46 pm
water outlet

Last post by Melba Nolan « Fri May 02, 2025 1:36 pm

by Melba Nolan » Fri May 02, 2025 1:36 pm

For sale: water outlet for 17/25 $15 plus postage
20250324_171742.jpg 20250324_171753.jpg

0 Replies

1300 Views

Last post by Melba Nolan
Fri May 02, 2025 1:36 pm
Rayfield carb Reduced Price

Last post by Melba Nolan « Fri May 02, 2025 1:24 pm
Replies: 4
by Melba Nolan » Wed Oct 30, 2024 1:21 am

First post

For sale: Rayfield carburetor and intake manifold $350 plus shipping
20241024_120832 - Copy.jpg
20241024_120858.jpg
20241024_121000.jpg
20241024_121203.jpg

New price is $300 plus shipping

Last post

move to top

4 Replies

2096 Views

Last post by Melba Nolan
Fri May 02, 2025 1:24 pm
floor board plate

Last post by Melba Nolan « Fri May 02, 2025 1:24 pm
Replies: 2
by Melba Nolan » Fri Nov 29, 2024 11:38 am

First post

For sale: like new floor board joining plate $5 each plus postage

20241029_175041.jpg 20241029_175025.jpg

Last post

move to top

2 Replies

1522 Views

Last post by Melba Nolan
Fri May 02, 2025 1:24 pm
fan bracket 17/25

Last post by Melba Nolan « Fri May 02, 2025 12:12 pm

by Melba Nolan » Fri May 02, 2025 12:12 pm

For sale: Fan bracket for 1917 thru 1925 $20 plus shipping
20240629_124013.jpg

0 Replies

1236 Views

Last post by Melba Nolan
Fri May 02, 2025 12:12 pm
Autokamp trailer

Last post by Jerry VanOoteghem « Fri May 02, 2025 6:29 am
Replies: 5
by Pipebomb » Tue Apr 29, 2025 7:16 am

First post

Helping sell a 1920s Autokamp trailer for an estate.
A few of you might remember This was posted a while back by Bushmike. It’s now ready to go to a new home.
It’s in pretty good shape, was actually used for camping 8/10 years ago. Has one rip in the main canvas. Here’s a bunch of pictures and a walk around video.

Can also get more pictures...

Last post

Helping sell a 1920s Autokamp trailer for an estate.
A few of you might remember This was posted a while back by Bushmike.

Did some thing happen to Bushmike? I liked his postings here.

5 Replies

1825 Views

Last post by Jerry VanOoteghem
Fri May 02, 2025 6:29 am
FS: Restored generators at Luray

Last post by ndnchf « Fri May 02, 2025 5:40 am

by ndnchf » Fri May 02, 2025 5:40 am

ll'l be at Luray with restored model T, model A and flathead V8 generators. The model T generators have tested and serviced armatures, new field coils, brushes, wiring, insulators, paint, sealed bearings and hardware. They are complete with refurbushed original Ford cutout, cover band and gear pinned and peened in place. Bench tested and ready to...

0 Replies

1342 Views

Last post by ndnchf
Fri May 02, 2025 5:40 am
For Sale: Four Magnetos on Magneto Monday

Last post by jethro « Thu May 01, 2025 8:10 pm
Replies: 5
by jethro » Sun Apr 27, 2025 9:23 pm

First post

This is a collection of four Magnetos For Sale on Magneto Monday. Look at the pictures closely. $200.00 each plus shipping but for Magneto Monday the first magneto to be purchased will sell for $100.00 plus shipping. Come get these while they last

Thank you for your interest.

R/S,
Jonathan Bodine
406 498 3946

Last post

Well, Magneto Monday promotion didn't work. How about $100.00 each plus shipping? Let me know what you think.

5 Replies

1376 Views

Last post by jethro
Thu May 01, 2025 8:10 pm

New Topic

9177 topics

Page 10 of 92
- Jump to page:
Previous
1
…
8
9
10
11
12
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum