Classifieds - Parts - Page 97

Classifieds - Parts

New Topic

10395 topics

Page 97 of 104
- Jump to page:
Previous
1
…
95
96
97
98
99
…
104
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83764 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

SOLD Jack Original Model T 1926/27 Ajax Stamped Ratchet Style

Last post by MAG « Tue Jan 10, 2023 8:47 am
Replies: 1
by MAG » Sun Jan 08, 2023 12:50 pm

First post

Model T 1926/27 Ajax stamped ratchet style jack. Stamping of the Ajax logo is very light – faint. This jack works as it should. These are not listed often and are hard to find. $125 and $15 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Last post

Sold quickly

1 Replies

834 Views

Last post by MAG
Tue Jan 10, 2023 8:47 am
WTB Alen HCCT base

Last post by BE_ZERO_BE « Tue Jan 10, 2023 1:20 am
Replies: 2
by tman12 » Mon Jan 09, 2023 12:05 pm

First post

Hi From Iowa! My orig Alen HCCT was dropped sometime in it's past & the cast iron base had one of the corners broken off. now bolted to a plank for stability. Does anyone know where I can get a replacement base? I would sure appreciate any help or suggestions! Thanks JOhn

Last post

They can be welded.
Here is one I did.

Start - Finish.jpg

2 Replies

953 Views

Last post by BE_ZERO_BE
Tue Jan 10, 2023 1:20 am
WTB: Early style spark rod Lever, part #3530.

Last post by Tony Delbianco « Mon Jan 09, 2023 10:34 pm
Replies: 5
by Tony Delbianco » Sat Jan 07, 2023 4:31 pm

First post

Does anyone have an early style spark rod Lever, part #3530, that they would sell? (See photo).
Original or reproduction would be fine.

I know the later style would work, but I'd like to try finding this one first.

Tony

Last post

Mike...thanks for the info...looks like it's my turn to chase the rabbit.
I have the newer style on my car now that I bent, it works fine, but am planning on doing some work on the column, so would like to try getting the correct parts together first.

Still looking!

5 Replies

1312 Views

Last post by Tony Delbianco
Mon Jan 09, 2023 10:34 pm
WTB—->Ford Script oil cap

Last post by Runabout « Mon Jan 09, 2023 10:11 pm
Replies: 5
by Runabout » Sat Jan 07, 2023 10:58 pm

First post

Looking for a 6 fluted Ford Script oil cap with “Made in USA” stamped on it… Steel or Brass.
Should look like this one ( with Made in USA ) stamped underneath the Ford script.

Last post

Tourabout ….. Nope haven’t found one yet, I’m sure someone has some laying around or stuck in a box of spare parts somewhere…

5 Replies

1833 Views

Last post by Runabout
Mon Jan 09, 2023 10:11 pm
1911-12 Aluminum Intake Manifold Sold P/P

Last post by rickd « Mon Jan 09, 2023 5:08 pm
Replies: 2
by rickd » Mon Jan 09, 2023 12:30 pm

First post

1911-12 aluminum intake manifold. Good condition. $75.00+$15.00 shipping. Check or money order. Email me through this site. M1.jpg M2.jpg M3.jpg

Last post

Thanks Tim.

2 Replies

931 Views

Last post by rickd
Mon Jan 09, 2023 5:08 pm
Nos front spring leaves

Last post by Shannon_in_Texas « Mon Jan 09, 2023 3:43 pm
Replies: 1
by Don ellis » Mon Jan 09, 2023 3:26 pm

First post

I have pretty good pile of nos spring leaves but they are only number 2 and four coming from the bottom. They are all clipped end. They are all marked Ford. Any interest at all? They would make good knives I bet.

Last post

Don, I would be interested in them. My younger brother is a bladesmith and it would be fun to see what he could create with them. I will send you an email through the site. Shannon

1 Replies

834 Views

Last post by Shannon_in_Texas
Mon Jan 09, 2023 3:43 pm
Battery Horn Sold P/P

Last post by rickd « Mon Jan 09, 2023 1:18 pm

by rickd » Mon Jan 09, 2023 1:18 pm

Working 6V battery horn. Was installed on a 25 Touring, replaced with the correct horn. This horn needs to go on a TT. $60.00+$15.00 shipping to the lower 48. Check or money order. Email me through this site. H1.jpg H2.jpg

0 Replies

647 Views

Last post by rickd
Mon Jan 09, 2023 1:18 pm
65/66 Mustang

Last post by TWrenn « Mon Jan 09, 2023 10:11 am
Replies: 5
by Melba Nolan » Fri Oct 14, 2022 11:54 pm

First post

For sale: 65/66 Mustang 298 V8 AC bracket $50 plus postage
20220819_174505.jpg 20220819_174514.jpg 20220819_174524.jpg

Last post

Dang Melba...here I thought you were selling an ACTUAL Mustang!! Ha ha. I been keeping an eye out for the right one . Lucky you Alan..you got just about exactly what I'd love to have. Preferably a 65, but I'd be ok with a 66.

5 Replies

1975 Views

Last post by TWrenn
Mon Jan 09, 2023 10:11 am
SOLD - Jack Handle fits a ratchet type Ajax or Walker jack

Last post by MAG « Mon Jan 09, 2023 9:31 am
Replies: 1
by MAG » Sun Jan 08, 2023 12:55 pm

First post

This jack handle fits a ratchet type Ajax or Walker jack. Unknown what year this is for. The nut cutout is for a ¾” size nut. $25 and $10 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

1 Replies

864 Views

Last post by MAG
Mon Jan 09, 2023 9:31 am
SOLD - Ford Wire Wheel Front Hubs

Last post by MAG « Mon Jan 09, 2023 9:30 am
Replies: 2
by MAG » Sun Jan 08, 2023 1:22 pm

First post

Front wire wheel hub set. Very nice condition with excellent stud threads and new races installed (bearing cups). $400 and $25 shipping. Selling as these are extra to my needs. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

2 Replies

1091 Views

Last post by MAG
Mon Jan 09, 2023 9:30 am
SOLD NEW Hubcaps - Nickel - 1926/27 Wire Wheels - set of 4

Last post by MAG « Mon Jan 09, 2023 9:30 am
Replies: 2
by MAG » Sun Jan 08, 2023 1:02 pm

First post

NEW 1926/27 wire wheel nickel hubcaps set of 4. These new are $22 each but these can be yours for $70 and $10 shipping. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

2 Replies

1195 Views

Last post by MAG
Mon Jan 09, 2023 9:30 am
1915 Towncar windshield SOLD

Last post by Tracer « Mon Jan 09, 2023 5:18 am
Replies: 2
by Layden Butler » Thu Jan 05, 2023 4:45 pm

First post

Original 1915 era Towncar windshield,

Last post

Such a rare and amazing piece

2 Replies

1034 Views

Last post by Tracer
Mon Jan 09, 2023 5:18 am
Stewart speedometer parts

Last post by tselliott « Sun Jan 08, 2023 9:41 pm
Replies: 2
by tselliott » Fri Jan 06, 2023 5:35 pm

First post

Selling as one lot. Bracket 4007 with a good swivel and fiber gear. Also included bracket 11295 with a swivel that has been taken apart, but still together. Has a bolt kind of hold it together. All the parts in the swivel move freely.
$100 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Sold,
Thanks MTFCA

2 Replies

1197 Views

Last post by tselliott
Sun Jan 08, 2023 9:41 pm
Demountable Rim

Last post by tselliott « Sun Jan 08, 2023 9:39 pm
Replies: 1
by tselliott » Fri Jan 06, 2023 5:19 pm

First post

This looks very much like a Hayes demountable, but it is not. It would definitely work in place of a Hayes. It seems to be well built. It weighs the same as a Hayes. There are no sharp edges. The tube stem hole has a little bit of a lip to it. All mounting holes look good. This has been hot dipped galvanized at some point. Would work great for...

Last post

Sold,
Thanks MTFCA

1 Replies

856 Views

Last post by tselliott
Sun Jan 08, 2023 9:39 pm
Early fan assembly #1

Last post by tselliott « Sun Jan 08, 2023 9:38 pm
Replies: 1
by tselliott » Fri Jan 06, 2023 6:25 pm

First post

All fan blade rivets are tight. One small crank in one of the blades. Brass pulley. T-604 bracket. Spins nice. Will clean up nice.
$100 plus shipping
Scott Elliott
971-5O6-94O2

Last post

Sold,
Thanks MTFCA

1 Replies

936 Views

Last post by tselliott
Sun Jan 08, 2023 9:38 pm
Hayes Demountable Rim

Last post by tselliott « Sun Jan 08, 2023 9:37 pm
Replies: 7
by tselliott » Fri Jan 06, 2023 4:59 pm

First post

No sharp edges. One hole is slightly wallowed out.
$85 plus shipping
Scott Elliott
971-5O6-94O2

Last post

Sold
Thanks MTFCA

7 Replies

1767 Views

Last post by tselliott
Sun Jan 08, 2023 9:37 pm
WTB Rear door Handle and Mech for 30/31 Sedan Delivery

Last post by aajf « Sun Jan 08, 2023 8:07 pm
Replies: 6
by aajf » Sun Nov 06, 2022 2:47 pm

First post

Rear door Handle and Mech for 30/31 Sedan Delivery. Please dm or contact 360-961-170six. Thanks! Andrew

Last post

Brent, Thank you so much for the information. Happy New Year!! Andrew

6 Replies

1610 Views

Last post by aajf
Sun Jan 08, 2023 8:07 pm
FS Water Outlet 1926/27 with eccentric

Last post by MAG « Sun Jan 08, 2023 7:13 pm
Replies: 1
by MAG » Sun Jan 08, 2023 12:46 pm

First post

1926/27 Water Outlet with eccentric, good condition. $45 + $10 shipping. Email me at markpaulagember AT aol DOT com

Last post

Sold awaiting payment

1 Replies

743 Views

Last post by MAG
Sun Jan 08, 2023 7:13 pm
Brass Step Plates Sold P/P

Last post by rickd « Sun Jan 08, 2023 4:48 pm
Replies: 2
by rickd » Sun Jan 08, 2023 2:20 pm

First post

Three brass step plates for sale. One still in the wrapper. Been on my shelves for years and need polished. $275.00 includes shipping. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg

Last post

Are you sure you want to do that? These brass step plates are heavy and shipping to you in NC is going to be in the $35-40 range. Reread my ad, my price includes shipping to you. You can email me through this site.

2 Replies

930 Views

Last post by rickd
Sun Jan 08, 2023 4:48 pm
SOLD

Last post by MAG « Sun Jan 08, 2023 3:50 pm
Replies: 3
by MAG » Sun Jan 08, 2023 1:04 pm

First post

SOLD post deleted

Last post

Thanks MTFCA

3 Replies

1239 Views

Last post by MAG
Sun Jan 08, 2023 3:50 pm
For Sale - new

Last post by BHarper « Sun Jan 08, 2023 1:24 pm
Replies: 1
by Daktarirp » Sun Jan 08, 2023 11:07 am

First post

New Floating transmission output shaft, complete. Never used, no longer needed.
$395.00 plus shipping

Last post

Email sent.

1 Replies

1253 Views

Last post by BHarper
Sun Jan 08, 2023 1:24 pm
SOLD An odd lot of Ford tools

Last post by MAG « Sun Jan 08, 2023 1:12 pm

by MAG » Sun Jan 08, 2023 1:12 pm

This lot of Ford tool wrenches include: 4 band, 2 Monkey, 1 TT Head & Spark Plug, and 1 box end. These can be yours for $45 and $15 shipping. Email me at markpaulagember AT aol dot com

0 Replies

793 Views

Last post by MAG
Sun Jan 08, 2023 1:12 pm
SOLD Ford Model T Connecting Rod Bolt Wrench 3Z647 & 5-Z-209 set

Last post by MAG « Sun Jan 08, 2023 12:59 pm

by MAG » Sun Jan 08, 2023 12:59 pm

Ford Model T Connecting rod bolt wrench’s 3Z647 & 5-Z-209. Both the same wrench from different years with tool number changes. $25 and $15 shipping. Email me at markpaulagember AT aol dot com

0 Replies

685 Views

Last post by MAG
Sun Jan 08, 2023 12:59 pm
SOLD Ford Wire Wheel Lug Wrench

Last post by MAG « Sun Jan 08, 2023 12:58 pm

by MAG » Sun Jan 08, 2023 12:58 pm

Ford script T-2839 Wire wheel lug wrench. This is the original wrench supplied by Ford when you got wire wheels. $80 and $15 shipping. Email me at markpaulagember AT aol dot com

0 Replies

669 Views

Last post by MAG
Sun Jan 08, 2023 12:58 pm
FS Tie Rod Anti Rattlers like new

Last post by MAG « Sun Jan 08, 2023 12:43 pm

by MAG » Sun Jan 08, 2023 12:43 pm

Tie Rod Anti Rattlers. $15 + $10 shipping. Email me at markpaulagember AT aol DOT com

0 Replies

592 Views

Last post by MAG
Sun Jan 08, 2023 12:43 pm
SOLD 1 Pair of new 1926-7 front fenders

Last post by Steve Hughes « Sun Jan 08, 2023 12:52 am
Replies: 4
by FATMAN » Wed Jan 04, 2023 12:22 pm

First post

Sold pending payment
1926-7 Front fenders new from Rootlieb
Selling these for a lady who's husband is in a nursing home retail is 675,00 each. how about 1200.00 local pick up
Bob
815-633-7244
modelt2001@comcast.net
no p m's please

Last post

email sent.

4 Replies

1598 Views

Last post by Steve Hughes
Sun Jan 08, 2023 12:52 am
Wanted kr Wilson tools

Last post by 1937Ford « Sat Jan 07, 2023 10:12 pm

by 1937Ford » Sat Jan 07, 2023 10:12 pm

I’m looking for the kr Wilson model b main bearing pouring bar, boring frame, reamers if anyone has any they would like to sell please email me it would be a great help. Thanks
dereklefsrud1@gmail.com

0 Replies

632 Views

Last post by 1937Ford
Sat Jan 07, 2023 10:12 pm
Stewart WARNER Speedo: For Sale / What Model?

Last post by KiwiFordGuy « Sat Jan 07, 2023 7:53 pm
Replies: 2
by KiwiFordGuy » Sat Jan 07, 2023 12:01 am

First post

Hi folks,

I recently purchased a bracket and speedo cable for a non Model T project I am working on.

This head was part of the package. Can anyone confirm the Model / Year and if this suits a T Ford or some other marque?

There is what I believe to be a model number or such that says M-5

Is excess is to my requirements so if you need such a...

Last post

Thanks Rick - appreciate the reply

2 Replies

1021 Views

Last post by KiwiFordGuy
Sat Jan 07, 2023 7:53 pm
WTB Door lock cylinder

Last post by Joe Bell « Sat Jan 07, 2023 5:42 pm
Replies: 4
by Bill Anziani » Thu Jan 05, 2023 10:45 pm

First post

Looking to replace the locking door cylinder with an original with keyfor 24 coupe
Any help appreciated

Last post

Bill found four but none of the keys turn the lock.

4 Replies

1187 Views

Last post by Joe Bell
Sat Jan 07, 2023 5:42 pm
FOR SALE: MODEL T FAN BELT GUIDE SOLD SOLD SOLD

Last post by StevenS « Sat Jan 07, 2023 2:01 pm
Replies: 2
by StevenS » Fri Jan 06, 2023 6:43 pm

First post

I have for sale a Model T fan belt guide. The price is $17 and that includes shipping to the lower 48 states. Shipping anyplace else will need to be adjusted. Just PM or Email me.

EMAIL LINK:

PM LINK:

1004 belt#1.jpg

Last post

Sold to Shannon, pending payment.

2 Replies

1183 Views

Last post by StevenS
Sat Jan 07, 2023 2:01 pm
Annual Winter Special-Model T Ford Ignition Coil Rebuilding.

Last post by Ron Patterson « Sat Jan 07, 2023 9:41 am
Replies: 7
by Ron Patterson » Tue Dec 20, 2022 6:11 pm

First post

Nelson Yammal's Argentina Coils 003 (2).JPG

Have your coils rebuilt and tested by someone with over 24 years’ experience and over 24,000 coils rebuilt for customers world wide
Coils received in my shop between January 1, 2023 and January 31, 2023 will enjoy the benefit of free Priority Mail return shipping to USA addresses.
If you have...

Last post

Get your coils rebuilt and save some money.

7 Replies

2691 Views

Last post by Ron Patterson
Sat Jan 07, 2023 9:41 am
FOR SALE: BRASS OIL GAUGE #1 SOLD SOLD SOLD

Last post by StevenS « Fri Jan 06, 2023 11:32 pm
Replies: 2
by StevenS » Fri Jan 06, 2023 6:49 pm

First post

I have for sale a brass oil gauge (THIS IS #1, I HAVE TWO FOR SALE SO PLEASE TELL ME WHICH ONE YOU WANT). The glass is good and the petcock turns. The price is $35 and that includes shipping to the lower 48 states. Shipping anyplace else will need to be adjusted. Just PM or Email me.

EMAIL LINK:

PM LINK:

1005 oil gauge#1.jpg

Last post

Sold to Brian, pending payment.

2 Replies

1153 Views

Last post by StevenS
Fri Jan 06, 2023 11:32 pm
FOR SALE: BRASS OIL GAUGE #2 SOLD SOLD SOLD

Last post by StevenS « Fri Jan 06, 2023 11:28 pm
Replies: 2
by StevenS » Fri Jan 06, 2023 6:51 pm

First post

I have for sale a brass oil gauge (THIS IS #2, I HAVE TWO FOR SALE SO PLEASE TELL ME WHICH ONE YOU WANT). The glass is good and the petcock turns. The price is $35 and that includes shipping to the lower 48 states. Shipping anyplace else will need to be adjusted. Just PM or Email me.

EMAIL LINK:

PM LINK:

1006 oil gauge#1.jpg

Last post

Ok Shannon, it is yours. Waiting for the email.

2 Replies

1194 Views

Last post by StevenS
Fri Jan 06, 2023 11:28 pm
FS: Stevens Drive Shaft Bushing Reamer and Jig

Last post by LOCParts « Fri Jan 06, 2023 10:56 pm
Replies: 2
by LOCParts » Fri Jan 06, 2023 7:48 pm

First post

For sale: Genuine Stevens NY T-244 Drive Shaft bushing reaming jig and No. 2581 reamer. This is the reamer and jig Stevens sold for reaming the bushing at the front of the Model T drive shaft tube. The jig is in very good condition and retains almost all of its original green paint. The No. 2581 reamer is also in good condition. Both of the items...

Last post

The Stevens driveshaft bushing jig and reamer have been spoken for.

Thanks,

MTFCA

2 Replies

1172 Views

Last post by LOCParts
Fri Jan 06, 2023 10:56 pm
F-S 1926-7 Touring body see photos

Last post by EricMac « Fri Jan 06, 2023 10:02 pm
Replies: 3
by FATMAN » Wed Jan 04, 2023 3:47 pm

First post

This is a real good start for someone, you will need to make 2 patch panels behind the rear fenders, this sale is for the body only, no frame or fenders, The doors all open nice lines are good for straightness, 3000.00
Body and doors and cowl are what's for sale
815-633-7244
MODELT2001@COMCAST.NET

Last post

That is a very good start and a decent price.

3 Replies

1377 Views

Last post by EricMac
Fri Jan 06, 2023 10:02 pm
Dropped Axle

Last post by Liberty Garage « Fri Jan 06, 2023 7:45 pm

by Liberty Garage » Fri Jan 06, 2023 7:45 pm

Model T dropped axle. 3 drop stretched to 52 KP to KP $450 + ship

0 Replies

828 Views

Last post by Liberty Garage
Fri Jan 06, 2023 7:45 pm
Ruckstell shifter parts

Last post by RajoRacer « Fri Jan 06, 2023 6:55 pm
Replies: 5
by tselliott » Fri Jan 06, 2023 4:29 pm

First post

Ruckstell shifter, lever and arm. No mounting bracket.
$25 plus shipping
Scott Elliott
971-5O6-94O2

Last post

Thanks for the photo Scott !

5 Replies

1370 Views

Last post by RajoRacer
Fri Jan 06, 2023 6:55 pm
Want To Trade: Ben Martin Restored '26-'27 Switch for a Black Model

Last post by RajoRacer « Fri Jan 06, 2023 4:48 pm
Replies: 4
by RajoRacer » Wed Oct 26, 2022 11:38 am

First post

I have a beautifully restored Ben Martin '26 - '27 switch plate that I'd like to trade for the same in the Black style.

Last post

Bump to the top - nobody has one on a shelf ?

4 Replies

1397 Views

Last post by RajoRacer
Fri Jan 06, 2023 4:48 pm
Fiber Cam Gear NOS

Last post by tselliott « Fri Jan 06, 2023 4:19 pm

by tselliott » Fri Jan 06, 2023 4:19 pm

This is probably more of a novelty item. It has a small chip on one tooth. I suppose it could be run in an engine.
Make offer
Scott Elliott
971-5O6-94O2

0 Replies

612 Views

Last post by tselliott
Fri Jan 06, 2023 4:19 pm
pedal pads

Last post by Melba Nolan « Fri Jan 06, 2023 2:02 pm
Replies: 3
by Melba Nolan » Sat Aug 06, 2022 9:44 am

First post

For sale: 1 each of pedal pad C R and B black rubber $8 for set plus shipping

Last post

move to top

3 Replies

1268 Views

Last post by Melba Nolan
Fri Jan 06, 2023 2:02 pm
BRASS hubcaps

Last post by Melba Nolan « Fri Jan 06, 2023 2:01 pm
Replies: 4
by Melba Nolan » Thu Jul 21, 2022 9:11 pm

First post

FOR SALE: 3 solid brass hub caps. 13/16 FORD MADE IN USA $55 plus postage
1 cap has a split on the side
. 20220721_195820.jpg 20220721_195824.jpg 20220721_195926.jpg

Last post

move to top

4 Replies

1808 Views

Last post by Melba Nolan
Fri Jan 06, 2023 2:01 pm
Accessory emergency/towing axle

Last post by tselliott « Fri Jan 06, 2023 1:56 pm
Replies: 1
by tselliott » Fri Jan 06, 2023 12:40 am

First post

For use on small drum axles. This could be used for a broken axle or towing. It will fit over an axle that is not broken. A front wheel is used on the axle stub. The threads are in good shape. This is a nice solid rare piece.
I don’t see any identifying names or marks on it.
$250 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Sold,
Thanks MTFCA

1 Replies

806 Views

Last post by tselliott
Fri Jan 06, 2023 1:56 pm
WTB reproduction Akuret or Rajo oil gauge.

Last post by Reno Speedster « Fri Jan 06, 2023 1:03 pm
Replies: 1
by Reno Speedster » Thu Jan 05, 2023 11:58 pm

First post

I am looking to add an oil gauge to my 22 and I see that the period Akuret and Rajo style gauges have been reproduced but are not currently available. If you have one sitting around that you don’t need, let me know. For the Akuret, I would need the shorter one for pre 26-27 cars.

Thanks!

Last post

I found a Rajo gauge but am still looking for an Akuret.

1 Replies

658 Views

Last post by Reno Speedster
Fri Jan 06, 2023 1:03 pm
Jno Brown Generator for Sale

Last post by John iaccino « Fri Jan 06, 2023 12:39 pm
Replies: 10
by John iaccino » Wed Jan 04, 2023 2:42 pm

First post

Brass Jno Brown carbide generator for sale. Bought it with the idea to use it on my car, but it makes the rest of the brass look bad. Will sell for what I paid plus shipping. $1200

Last post

Still available. Just a few comments. It is well known that Ford used whatever parts were in the supply at the time. Often headlights were not matched to the side lights or tail light. The generator was not necessarily matched to the rest of the brass. Today we often want everything to match but that was not the way it was 100 years ago. in any...

10 Replies

2184 Views

Last post by John iaccino
Fri Jan 06, 2023 12:39 pm
Brass Holley G carburetor/sold

Last post by Corey Walker « Fri Jan 06, 2023 9:58 am
Replies: 1
by Corey Walker » Mon Jan 02, 2023 8:04 am

First post

New needle and seat, float, choke spring, venturi, reconditioned spray needle. The double arm choke lever for use with a starter is not brass but painted gold to match as is the spray needle. Test run, $225 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

1 Replies

791 Views

Last post by Corey Walker
Fri Jan 06, 2023 9:58 am
Wanted: 1926/1927 Wire Wheel Front Hub

Last post by Mark Gregush « Thu Jan 05, 2023 9:48 pm
Replies: 5
by Speedster Jeff » Thu Jan 05, 2023 10:30 am

First post

Hello,

I am in need of one (1) good front wire wheel hub for a 1926/1927 style wire wheel. One of the hubs I was rebuilding has a spun outer bearing and I would like to purchase a good used one that doesn't have this problem. After speaking with a few T folks, this seems to have been a problem.

Thank you,

Jeff Smith
Stuart, Florida

Last post

Spun/loose race/cup.

5 Replies

1347 Views

Last post by Mark Gregush
Thu Jan 05, 2023 9:48 pm
1926 T Coupe bumpers

Last post by Humblej « Thu Jan 05, 2023 7:20 pm
Replies: 7
by BarnesvilleT » Wed Jan 04, 2023 11:58 am

First post

Trying to locate some original bumpers and brackets. Prefer split on the back but will full will work.

Last post

There are two different length rear bumper brackets for 26-27. The coupe/roadster use a longer rear bumper bracket than the sedan/touring due to the bottom of the spare tire sticking out further on the coupe/roadster.

7 Replies

1810 Views

Last post by Humblej
Thu Jan 05, 2023 7:20 pm
Bauer fatman steering wheel center Wanted

Last post by Layden Butler « Thu Jan 05, 2023 7:14 pm

by Layden Butler » Thu Jan 05, 2023 7:14 pm

Just need the steel center ( 2 pictures) to complete this wheel. Thanks for looking.

0 Replies

629 Views

Last post by Layden Butler
Thu Jan 05, 2023 7:14 pm
Stewart speedometer bracket Wanted

Last post by Layden Butler « Thu Jan 05, 2023 6:47 pm
Replies: 2
by Layden Butler » Tue Dec 20, 2022 4:00 pm

First post

Need bracket to mount my speedometer head to a wooden firewall. Like the pictures below or what have you?
Thanks for looking.

Last post

Thanks for the offer but too rich for my blood.

2 Replies

1125 Views

Last post by Layden Butler
Thu Jan 05, 2023 6:47 pm
1912 touring body wanted

Last post by Aussie16 « Thu Jan 05, 2023 6:37 pm
Replies: 3
by Abner1601 » Mon Jan 02, 2023 11:00 am

First post

My 12 came as a barn find with a 14 touring body. I’d like to find a 12 touring body in restorable condition. Anything out there?

Last post

A rare opportunity there at Langs! Get on it!

3 Replies

1686 Views

Last post by Aussie16
Thu Jan 05, 2023 6:37 pm
N.O.S FORD T MAGNETO LAMP REGULATOR

Last post by David Babcock « Thu Jan 05, 2023 1:55 pm
Replies: 3
by David Babcock » Fri Dec 23, 2022 12:45 pm

First post

NEW IN BOX. 1920s ?. $100.

Last post

ITEM IS SOLD.

3 Replies

1528 Views

Last post by David Babcock
Thu Jan 05, 2023 1:55 pm
Wtb 26/27 Closed Car Door Key Blanks.

Last post by ModelT46 « Thu Jan 05, 2023 1:21 pm
Replies: 2
by Jeepbone1 » Wed Jan 04, 2023 7:48 pm

First post

Does anyone know where I can get an original 26/27 door lock key blank? Looking for a few for my 27 coupe. Ford script preferred and 2 would be awesome! An original trunk key would be icing on the cake too.

Call or text me anytime. 54zero-76one-2three03
Email me at bkirtner(at)gmail(dot)com.
PM’s generally get lost.
Brad

Last post

I have several original used keys, Ford script and numbered. If your keep/lock cylinder ils original, you should know the key number. Let me klnow th e key number and I will see if I h ave one with the same number.

2 Replies

917 Views

Last post by ModelT46
Thu Jan 05, 2023 1:21 pm
1926/7 Chrome Windshield and stanchions

Last post by Mopar_man « Thu Jan 05, 2023 11:43 am
Replies: 7
by Mopar_man » Thu Dec 01, 2022 8:46 pm

First post

My Touring car came with a Chrome windshield Top and bottom as well as chrome stanchions. I went with the original look. These were sold for a speedster or a hotrod. There is no channel on the bottom for the rubber. All look presentable. The stanchions are very nice and the windshield frame could use a polishing. 350.00 for everything you see plus...

Last post

To the top. Someone??? I'd like to take the money and put it into a new windshield.

7 Replies

1945 Views

Last post by Mopar_man
Thu Jan 05, 2023 11:43 am
WTB upper water outlet/fan mount

Last post by CTLeonard « Thu Jan 05, 2023 10:14 am
Replies: 2
by colonelpowers » Wed Jan 04, 2023 8:45 pm

First post

I am really just needing the eccentric cast iron insert. Much of the outer lip is broken off of mine. I would be willing to buy the entire water outlet if I need to.

Thanks and God Bless

Last post

Email to ctleonard64@gmail.com

2 Replies

924 Views

Last post by CTLeonard
Thu Jan 05, 2023 10:14 am
Water pump pulley

Last post by Kevin Pharis « Wed Jan 04, 2023 10:56 pm
Replies: 3
by Kevin Pharis » Fri Dec 02, 2022 6:53 pm

First post

The vendors were out, so I made my own… and an extra. Here is the extra. $40 plus shipping

1-3/4” diameter
1/2” shaft bore
1-1/4” flat belt
Crowned surface
Aluminum

AE3F29B2-D049-4F20-993E-4E1254CCACD7.jpeg 443D87AF-2C45-491B-BAF9-E0DF866DF835.jpeg A0CE4FDD-E855-41F8-85A1-5B941856F0A7.jpeg

Last post

Sold!!!!!!!

3 Replies

1323 Views

Last post by Kevin Pharis
Wed Jan 04, 2023 10:56 pm
WTB brass rands winsheild hinge

Last post by brian korth « Wed Jan 04, 2023 9:36 pm

by brian korth » Wed Jan 04, 2023 9:36 pm

I am looking for an original set of hinges to fit my 1911 roadster. Already have set for one side of windshield and need a second set for other side. Original set will have words- RANDS MFG. CO stamped in a half circle. Also DETRIOT,MICH. stamped in another half circle. call me at 586 465-2306 email brian.r.korth@gmail.com 20230119_193918.jpg

0 Replies

593 Views

Last post by brian korth
Wed Jan 04, 2023 9:36 pm
Fs solar headlights

Last post by JThompson « Wed Jan 04, 2023 9:29 pm
Replies: 3
by Bjerm » Sun Aug 29, 2021 6:54 pm

First post

Really nice pair of solar headlights. I was going to use them for a speedster build but my plans changed so they are for sale$500 plus shipping best way to reach me is bjerm10@gmail.com

Last post

Do you still have the headlights?
Where are you located?
Thanks,
Jim

3 Replies

2331 Views

Last post by JThompson
Wed Jan 04, 2023 9:29 pm
Parts for sale

Last post by CTLeonard « Wed Jan 04, 2023 3:13 pm
Replies: 16
by jaybee47 » Tue Jan 03, 2023 9:28 pm

First post

Gas tank, square. $50 plus shipping to 48 states only. Or pickup at zip 46725 Indiana. Has some small bits of debris rattling inside which can probably be sucked out with a vacuum having a small diameter hose. Marked '27 but believe it came from a '25 Tudor. Stored over 40 years ago without leaks.

Hubcaps, brass. $10 plus shipping to 48 states...

Last post

I would like your radiator! Please call Mike or email me. 8122058541. ctleonard64@gmail.com

16 Replies

3782 Views

Last post by CTLeonard
Wed Jan 04, 2023 3:13 pm
SOLD: High Quality, Brass Era Through Early Teens, Six Cylinder Distributor Assembly

Last post by GGZ « Wed Jan 04, 2023 11:18 am
Replies: 5
by GGZ » Wed Nov 30, 2022 6:59 pm

First post

SOLD!

Here is a very high quality, six cylinder distributor assembly that would be suitable for any large, early six cylinder automobile. It appears to have been restored at some point and it in excellent condition. The distributor body itself is cast and machined aluminum. The cap and wire contacts are excellent. It has its original bronze spark...

Last post

SOLD SOLD SOLD!

5 Replies

1879 Views

Last post by GGZ
Wed Jan 04, 2023 11:18 am
exhaust pack nut

Last post by RedDogPilot « Tue Jan 03, 2023 6:56 pm
Replies: 2
by Melba Nolan » Sun Dec 18, 2022 5:56 pm

First post

For sale: New brass exhaust pack nut $10 plus postage
20221218_220439.jpg

Last post

i will take it. dan mari 2820 shepperd rd monkton md 21111 410241 4584

2 Replies

1076 Views

Last post by RedDogPilot
Tue Jan 03, 2023 6:56 pm
WANTED

Last post by havnfun « Tue Jan 03, 2023 3:19 pm
Replies: 5
by Rich P. Bingham » Sat Dec 31, 2022 6:24 pm

First post

Does anyone who has nos Scandinavia linings '09-'25 they laid by before the hoarders got them all have a set they could sell me ? Much appreciated !

Last post

Rich,
Sent you an email

5 Replies

1922 Views

Last post by havnfun
Tue Jan 03, 2023 3:19 pm
SOLD Firestone Whitewall 4.40/4.50-21

Last post by Adam « Tue Jan 03, 2023 2:16 pm
Replies: 3
by Adam » Sat Dec 10, 2022 11:15 am

First post

Item is SOLD

Last post

Still available. The person I was holding it for didn’t follow thru.

3 Replies

1028 Views

Last post by Adam
Tue Jan 03, 2023 2:16 pm
Stevens Tooling is In. FS video added

Last post by Dan Hatch « Tue Jan 03, 2023 11:42 am
Replies: 12
by Dan Hatch » Thu Dec 29, 2022 4:14 pm

First post

New batch of Stevens Front Axle Tooling is done. Those that pre ordered will be receiving total soon. There are a few sets left, so if you want a set you better jump on these. Due to the price increase there may not be any more.
These are only being sold in sets, one top (tapered) reamer and one reamer/tap (bottom).
Price is $475 for the set +...

Last post

Back to the top

12 Replies

2550 Views

Last post by Dan Hatch
Tue Jan 03, 2023 11:42 am
Stevens tooling UPDATE

Last post by Dan Hatch « Tue Jan 03, 2023 11:42 am
Replies: 2
by Dan Hatch » Mon Jan 02, 2023 11:55 am

First post

If you think you are on the list for a set of Stevens Tooling and have not gotten a recent email ( as on last couple days ) with either a total and payment instructions or a request for address. Email me at address in pictures. I have sent out these to everyone on list and wanted to be sure that I have not missed anyone. Thanks Dan...

Last post

Back to the top

2 Replies

738 Views

Last post by Dan Hatch
Tue Jan 03, 2023 11:42 am
FS Tail light bracket

Last post by Tim D « Tue Jan 03, 2023 10:33 am

by Tim D » Tue Jan 03, 2023 10:33 am

I have a taillight bracket for sale $25 plus shipping.
Looks like it fits a Roadster body car 1915 -1921.
most likely a reproduction.

0 Replies

618 Views

Last post by Tim D
Tue Jan 03, 2023 10:33 am
Pair of sidelamps fs. Sold

Last post by CTLeonard « Tue Jan 03, 2023 9:40 am

by CTLeonard » Tue Jan 03, 2023 9:40 am

Decent set of lamps. One is missing the wheel, the other is spun out.brazs tops and doors. 140.00 plus shipping. ctleonard64@gmail.com IMG_20230103_083442058.jpg IMG_20230103_083457792.jpg IMG_20230103_083417130.jpg IMG_20230103_083427024.jpg

0 Replies

630 Views

Last post by CTLeonard
Tue Jan 03, 2023 9:40 am
13-14 coil box with coils fs. Sold

Last post by bill_severn « Tue Jan 03, 2023 12:21 am
Replies: 1
by CTLeonard » Mon Jan 02, 2023 2:39 pm

First post

Nice box with switch and 4 coils done by Ron Patterson. 250.00 for the box and switch. Coils are 90.00 each. That's 610.00 total. Buy the box, buy the coils or buy both. You'll have to pay shipping also IMG_20230102_132859340.jpg IMG_20230102_132909573.jpg IMG_20230102_132826244.jpg IMG_20230102_132838087.jpg IMG_20230102_132844425.jpg

Last post

Leonard,

I'd like to buy the coil box. I don't need the coils.

Regards,

Bill Severn
936- four four three- 800 six.

1 Replies

1013 Views

Last post by bill_severn
Tue Jan 03, 2023 12:21 am
WTB 4 Champion X Plugs

Last post by JBog « Mon Jan 02, 2023 11:52 pm

by JBog » Mon Jan 02, 2023 11:52 pm

Prefer the older ones in clean and good usable condition. Thanks!

0 Replies

636 Views

Last post by JBog
Mon Jan 02, 2023 11:52 pm
WTB—> 1915 WINDSHIELD WITH RIVETED BRACKETS

Last post by Runabout « Mon Jan 02, 2023 5:46 pm
Replies: 12
by Runabout » Tue Dec 20, 2022 10:28 pm

First post

Looking for a good 1915 windshield frame it should be riveted together not bolted at the lamp/lower frame mounting brackets. Not interested in anything warped, rusted out or full of pits. 423-2eight4-97fifty TEXT, CALL, send pictures, anytime before 11:00 pm. EST.
Thanks .

Last post

Part found here locally…
No longer looking.
Thanks.

12 Replies

2794 Views

Last post by Runabout
Mon Jan 02, 2023 5:46 pm
Changing out fan bushings

Last post by Dan McEachern « Mon Jan 02, 2023 3:39 pm
Replies: 3
by Rich P. Bingham » Mon Jan 02, 2023 1:54 pm

First post

I have my own ideas on this, but I'll bet our members have some good tips ! 1916-20 (?) cast iron hub. Thanks, fellows !

Last post

If you screw a tap into the bushing, just use a long punch or a rod against the end of the tap and knock the bushing out from the opposite direction.
Same for spindle bushings.

3 Replies

1263 Views

Last post by Dan McEachern
Mon Jan 02, 2023 3:39 pm
Sprauge steering box

Last post by DustySpokes « Mon Jan 02, 2023 3:35 pm
Replies: 1
by Bvelk » Sat Nov 26, 2022 11:32 am

First post

SPRAUGE STEERING WTB I am looking for a Sprague scepter gear or the complete steering box setup. Feel free to call anytime 5152917742

Last post

any luck in the quest for the Sprague gear box ? ( a super tough item to find indeed ) .

1 Replies

1204 Views

Last post by DustySpokes
Mon Jan 02, 2023 3:35 pm
Wanted 7-leaf Taper Leaf Rear Spring

Last post by DustySpokes « Mon Jan 02, 2023 3:30 pm
Replies: 3
by Carter » Tue Nov 29, 2022 2:40 pm

First post

As the title says, I'm looking for a nice 7-leaf taper leaf rear spring, the closer to Western Pennsylvania the better. Would consider an 8 leaf also.

Thanks,

Dave Carter

Last post

Did you ever find the spring set ?

3 Replies

1278 Views

Last post by DustySpokes
Mon Jan 02, 2023 3:30 pm
WTB Linebor unit and babbitt molds

Last post by Gene_French « Mon Jan 02, 2023 9:21 am
Replies: 1
by Vonau » Mon Jan 02, 2023 5:24 am

First post

The restoration of my Touring 1926 is a big challenge. I'm from Switzerland and unfortunately I haven't found anyone here or in the surrounding countries who can cast the Babbitt main bearings.
I could imagine learning this job myself. Therefore my question:

Does anyone out there have a used linebor unit and possibly molds that they no longer use...

Last post

Beat:
i sent an email ... i am unable to add an attachment to the email thru the MTFCA mail process ... email my actual email address and request a set of my procedure sheets ... this will be a pdf file ... my email address is : gfrench1953@hotmail.com
Gene French

1 Replies

865 Views

Last post by Gene_French
Mon Jan 02, 2023 9:21 am
Looking for a good front hub for my 22 (found one)

Last post by CTLeonard « Mon Jan 02, 2023 8:36 am
Replies: 1
by Reno Speedster » Sat Dec 31, 2022 8:18 pm

First post

I am rebuilding my wheels and in the process found that the bearing race in one of my front hubs has spun so the race is loose. I have a spare, but it turns out to have the same problem. Does anyone have a good front hub for a wood wheel they would part with? Send me a pm and let me know if you do.

Thanks

(Thanks to the folks who offered up...

Last post

I have a hub. Email for pictures. ctleonard64@gmail.com

1 Replies

762 Views

Last post by CTLeonard
Mon Jan 02, 2023 8:36 am
Looking for a T near here... Sounds simple... but...

Last post by frank_w « Mon Jan 02, 2023 5:19 am
Replies: 4
by Susanne » Fri Dec 30, 2022 12:01 pm

First post

We moved to Italy. I sold Angel (deep regrets there) to make the move, but I am now in serious 3 pedal withdrawl and hope to find something close by that I can get back into the hobby...

If you know of a car for sale in the EU, please let me know. Extra kudos for a pre-16 (yeah, I'm a glutton for punishment, it seems!), and hope to find something...

Last post

Hello,
don't know if that helps, but if you have the time to spare, you might want to visit the Veterama in Mannheim (Germany):
Almost certainly there will be a T or two for sale there.

Apart from that, since I don't know if you're aware of these, it might also be a good idea to keep an eye on the various European craigslist -equivalents. To...

4 Replies

1730 Views

Last post by frank_w
Mon Jan 02, 2023 5:19 am
Kingston L4

Last post by Melba Nolan « Sun Jan 01, 2023 11:40 pm

by Melba Nolan » Sun Jan 01, 2023 11:40 pm

For sale: Kingston L4 Carburetor $75 plus postage
20230101_222201.jpg 20230101_222148.jpg 20230101_222009.jpg

0 Replies

595 Views

Last post by Melba Nolan
Sun Jan 01, 2023 11:40 pm
license plate holder

Last post by Melba Nolan « Sun Jan 01, 2023 11:05 pm
Replies: 3
by Melba Nolan » Thu Oct 20, 2022 6:28 pm

First post

For sale: license plate holder with adjustable light $45 plus postage
20220628_151045.jpg

Last post

sold pending payment

3 Replies

1432 Views

Last post by Melba Nolan
Sun Jan 01, 2023 11:05 pm
John Brown Generator

Last post by Tourabout « Sun Jan 01, 2023 5:56 pm
Replies: 5
by Tourabout » Sat Dec 31, 2022 10:30 am

First post

Looking for a good 1909 1910 JWB Carbide Generator for the new year. Thanks for any help or directive.

816260EA-5A99-4D8B-9298-77441BE2BC7F.jpeg 4FCF922F-AABF-4D0C-9FD2-0DFCACCFBF48.jpeg

Last post

Rick,
i can’t use a Victor generator. It has to be a John Brown Generator.
Thanks,
Robbie

5 Replies

1904 Views

Last post by Tourabout
Sun Jan 01, 2023 5:56 pm
Front plate for oil pump F/S

Last post by Layden Butler « Sun Jan 01, 2023 5:55 pm

by Layden Butler » Sun Jan 01, 2023 5:55 pm

Original Kirk front plate to put an oil pump on a Model T block. $300, domestic postage $15.

0 Replies

700 Views

Last post by Layden Butler
Sun Jan 01, 2023 5:55 pm
SOLD Complete windshield for 1926-7 open car with stantions

Last post by Shannon_in_Texas « Sun Jan 01, 2023 2:15 pm
Replies: 2
by FATMAN » Sun Jan 01, 2023 12:38 pm

First post

Sold to Shannon pending payment
Just got this in 26-7 roadster or touring complete windshield, original has the stantions, only thing missing are the wingnuts hard to find one this good
500.00 plus postage or pick up in Loves Park Il
815-633-7244
modelt2001@comcast.net

Last post

Bob, I sent you an email about this. Thanks!

2 Replies

921 Views

Last post by Shannon_in_Texas
Sun Jan 01, 2023 2:15 pm
WTB windshield moulding

Last post by bnchief « Sun Jan 01, 2023 11:49 am
Replies: 2
by bnchief » Thu Dec 15, 2022 7:40 am

First post

Look for the molding on a 1927 model t fordor this goes on the inside at the bottom of the front header interior trim piece for 1927 model t fordor.jpg

Last post

This is the same molding as a two door or coupe

2 Replies

1301 Views

Last post by bnchief
Sun Jan 01, 2023 11:49 am
WTB TT rear tires 32

Last post by Modeltmike « Sun Jan 01, 2023 8:16 am
Replies: 3
by Modeltmike » Thu Dec 08, 2022 7:41 am

First post

Needing tires and tubes for rear TT project. Don’t have to be new. It looks like the old tires are 32 x 4 1/2. Other sizes may work. Let me know what you have. Thanks

Last post

Still looking. Likely hard to find a decent used or slightly used pair, but never know what’s out there. Thanks

3 Replies

1301 Views

Last post by Modeltmike
Sun Jan 01, 2023 8:16 am
Ruxstell Rear End for TT Truck

Last post by Nv Bob « Sat Dec 31, 2022 1:41 pm
Replies: 1
by GatorsModelT » Sat Dec 31, 2022 12:24 pm

First post

FOR SALE: High Speed Ruxstell rear end for TT Truck. Completely Rebuilt. Has NEW Bull Gear & Worm Gear Set. The Gears were purchased from Mr. Hartman in Arkansas. Asking $2000.00

Last post

To bad your so far about yo rebiuld mine

1 Replies

936 Views

Last post by Nv Bob
Sat Dec 31, 2022 1:41 pm
Looking to buy a 4 wheel drive conversion kit or car

Last post by Nv Bob « Sat Dec 31, 2022 1:38 pm
Replies: 6
by dobro1956 » Fri Dec 30, 2022 1:58 pm

First post

The title pretty much sums it up. I would like to find a 4 wheel drive kit for the Ts. One of the later repros made by the original manufactures family would be preferred as it should not require major rebuilding. But I'm open to anything. If anyone has contact info for the family members that did the repro, I would be interested in contacting...

Last post

Redoing tracks on my snow flyer

6 Replies

1780 Views

Last post by Nv Bob
Sat Dec 31, 2022 1:38 pm
spot light

Last post by Melba Nolan « Sat Dec 31, 2022 11:24 am
Replies: 2
by Melba Nolan » Thu Oct 20, 2022 5:06 pm

First post

For sale: nice small spot light with brackets. $75 plus postage
20221020_105657.jpg 20221020_105728.jpg

Last post

move to top

2 Replies

1129 Views

Last post by Melba Nolan
Sat Dec 31, 2022 11:24 am
carb priming rods

Last post by Melba Nolan « Sat Dec 31, 2022 10:18 am
Replies: 2
by Melba Nolan » Thu Oct 20, 2022 3:40 pm

First post

For sale: carb priming rods. Top one is $15 2nd is $15 3rd is New $20 last 3 $5 ea. plus postage

20221020_105444.jpg 20221020_105407.jpg 20221020_105432.jpg

Last post

move to top

2 Replies

1046 Views

Last post by Melba Nolan
Sat Dec 31, 2022 10:18 am
early steering wheel

Last post by Melba Nolan « Sat Dec 31, 2022 10:17 am
Replies: 4
by Melba Nolan » Tue Aug 16, 2022 1:34 pm

First post

20220816_115533.jpg 20220816_115553.jpg 20220816_115559.jpg 20220816_115617.jpg 20220816_115627.jpg
For sale: One piece steering wheel. Ford script and #T902 BO. needs refinshed and the joint needs reglued. $75 plus postage

Last post

move to to[

4 Replies

1780 Views

Last post by Melba Nolan
Sat Dec 31, 2022 10:17 am
Login test

Last post by Scott Rosenthal « Sat Dec 31, 2022 10:05 am
Replies: 1
by Scott Rosenthal » Sat Dec 31, 2022 9:58 am

First post

Testing Classified not showing up.

Last post

1909 Double Twist brass horns (2). Both perfect show condition parts with correct mounting foot, and screen cover. Both use threaded brass reed (not included). Both appear close to identical....one has Nonperiel stamped, other has no markings. 900.00 for Nonperiel....800.00 for no stamping. Five one three 378 four two three five.
Thx.

1 Replies

645 Views

Last post by Scott Rosenthal
Sat Dec 31, 2022 10:05 am
F-S 2 Sets of rear coupe and roadster fender irons

Last post by FATMAN « Sat Dec 31, 2022 9:43 am
Replies: 2
by FATMAN » Fri Dec 30, 2022 11:50 am

First post

These are above normal
no wear where the eye bolt goes
coupe and roadster getting hard to find as nice as these are 150.00 per pair plus postage
815-633-7244
Bob
modelt2001@comcast.net
no p.m.'s please

Last post

Going to t bay soon

2 Replies

754 Views

Last post by FATMAN
Sat Dec 31, 2022 9:43 am
Dyke's Encyclopedia brass era 1915 SOLD

Last post by Jim Suter Virginia « Sat Dec 31, 2022 6:24 am
Replies: 4
by Layden Butler » Sat Oct 01, 2022 4:54 pm

First post

Early Dyke's Encyclopedia from the brass Model T era, 4th Edition 1915-1916, famous for 640 pages of great general automotive reading ( it is 2 thick) plus another 100 pages of specific make. Famous Model T Ford supplement section, aircraft, trucks, tractors, motorcycles, carburetors, general engineering, magnetos. and on and on seemingly forever!...

Last post

Layden,
I will take your Dyke's Book for $60 including postage. Will e-mail you to give you my address and to cover payment. Thanks
Jim Suter

4 Replies

1471 Views

Last post by Jim Suter Virginia
Sat Dec 31, 2022 6:24 am
rocker sill panels

Last post by Melba Nolan « Fri Dec 30, 2022 6:28 pm
Replies: 1
by Melba Nolan » Thu Nov 24, 2022 3:07 pm

First post

For sale: New rocker sill panels for 26/27 $45 plus postage
20221124_101309.jpg 20221124_101318.jpg

Last post

sold pending payment

1 Replies

993 Views

Last post by Melba Nolan
Fri Dec 30, 2022 6:28 pm
NOS Rush Roller Timer Brush (SOLD)

Last post by RajoRacer « Fri Dec 30, 2022 4:03 pm
Replies: 1
by ThreePedalTapDancer » Fri Dec 30, 2022 2:39 pm

First post

BD054FAD-7E75-4DBA-A64A-EC97AD766C8B.jpeg Here is an original NOS Rush Roller Brush in its original crumbling box. 25.00 shipped.

Last post

I'll take that Ed ! I'll send you a note.

1 Replies

728 Views

Last post by RajoRacer
Fri Dec 30, 2022 4:03 pm
WTB 26/27 roadster body

Last post by micshotrodgarage « Fri Dec 30, 2022 12:22 pm
Replies: 24
by ModelTGal » Sun Apr 24, 2022 6:50 pm

First post

Finally finished most of the running gear and directed my focus to my roadster body - only to discover a former owner had pop-riveted patch panels along the entire length of both side of the body (firewall to back of bucket) to cover up rusted out panels and (unfortunately) a significant amount of the subframe is also rusted out or paper thin…...

Last post

Hi Jennifer, I have some 26-27 T roadster stuff which may help you rebuild your car. I'm not sure what all you are needing. Make me a list and will go from there. I'm not real close to your local; western Colorado, But maybe we can work it out. Kind Regards Mike

24 Replies

7100 Views

Last post by micshotrodgarage
Fri Dec 30, 2022 12:22 pm
dippers

Last post by Melba Nolan « Fri Dec 30, 2022 11:55 am

by Melba Nolan » Fri Dec 30, 2022 11:55 am

20221230_171536.jpg
For sale: 5 new dippers $20 plus postage

0 Replies

610 Views

Last post by Melba Nolan
Fri Dec 30, 2022 11:55 am
Split rim question

Last post by TheSaintDiscJockey « Fri Dec 30, 2022 11:52 am
Replies: 1
by TheSaintDiscJockey » Fri Dec 30, 2022 11:50 am

First post

What was the purpose of the split rim?
Was it to accommodate the larger balloon tire?

Last post

Sorry!
Wrong section!

1 Replies

706 Views

Last post by TheSaintDiscJockey
Fri Dec 30, 2022 11:52 am
Now found thanks! WTB: KR Wilson Quick Bolts

Last post by KiwiFordGuy « Thu Dec 29, 2022 6:11 pm
Replies: 10
by KiwiFordGuy » Tue Dec 20, 2022 5:53 am

First post

I’m looking for a set of quick bolts, keepers and nuts to complete my KR Wilson Combination Set up.

Please message me via the forum if you can assist. To do this, please click on my profile name and then either click on ‘send an email’ or ‘send private message’.

Thanks Alex

Last post

Thanks to those who messaged!

10 Replies

2307 Views

Last post by KiwiFordGuy
Thu Dec 29, 2022 6:11 pm
Various fender and body brackets

Last post by Allan « Thu Dec 29, 2022 5:55 pm
Replies: 2
by Divcoone » Thu Dec 29, 2022 11:28 am

First post

Later fender brackets and early body brackets. $25.00 local pick up. $17.00 shipped priority mail.
Located in Johnstown, Pa. 15904
Personal check with hold.
Bob Giles
divco100b@icloud.com
814-266-2780

Last post

The guy looking for depot hack fenders needs these.

Allan from down under.

2 Replies

1010 Views

Last post by Allan
Thu Dec 29, 2022 5:55 pm
Seeking Allen Electric Hand Cranked Coil Tester

Last post by GG Gregory « Thu Dec 29, 2022 3:46 pm
Replies: 4
by Ron Patterson » Mon Dec 26, 2022 6:27 pm

First post

Seeking Allen Electric HCCT with missing meter/s for restoration.
Like this one.
solid disc style.jpg
Ron Patterson

Last post

Jim, The whole machine needs gone through. I’m not even sure the meter works. I put a good coil in and get nothing.

4 Replies

1700 Views

Last post by GG Gregory
Thu Dec 29, 2022 3:46 pm
Reproduction 1914 Model T body

Last post by avahon « Thu Dec 29, 2022 1:16 pm
Replies: 8
by Skidoo1914 » Thu Jul 08, 2021 10:40 pm

First post

FS Reproduction 1914 Model T body. Has seat cushions and upholstery. Sheet metal is in primer. Purchased decades ago and never installed on a car.

Located near Reno, NV $2,800 email questions

DSC00553.JPG DSC00552.JPG

Last post

Built by Charlie Shaver of Missouri decades ago.

8 Replies

3694 Views

Last post by avahon
Thu Dec 29, 2022 1:16 pm
Taillight

Last post by Mark Gregush « Thu Dec 29, 2022 1:03 pm
Replies: 3
by Divcoone » Thu Dec 29, 2022 11:38 am

First post

2 bulb taillight. Not sure what it belongs to. $25.00 local pick up in Johnstown, Pa. 15904. $17.00 shipped with priority mail.
Bob Giles
divco100b@icloud.com
814-266-2780

Last post

Aftermarket light. They were made so one side could be magneto powered and the other hooked up to a battery. Some use them now as a tail/brake light. Very nice example.

3 Replies

1285 Views

Last post by Mark Gregush
Thu Dec 29, 2022 1:03 pm

New Topic

10395 topics

Page 97 of 104
- Jump to page:
Previous
1
…
95
96
97
98
99
…
104
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum