Thrust washers
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
wrees
Topic author - Posts: 10
- Joined: Sun Jan 06, 2019 3:20 pm
- First Name: Walter
- Last Name: Rees
- * REQUIRED* Type and Year of Model Ts owned: 1923 Touring
- Location: Holtwood, PA
Thrust washers
When replacing thrust washers, do thrust plates go on either side of thrust washers or both towards pumpkin?
-
Steve Jelf
- Posts: 7237
- Joined: Fri Jan 04, 2019 9:37 pm
- First Name: Steve
- Last Name: Jelf
- * REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
- Location: Parkerfield, Kansas
- Board Member Since: 2007
- Contact:
Re: Thrust washers
Sandwich. Steel bread, bronze filling.
The inevitable often happens.
1915 Runabout
1923 Touring
1915 Runabout
1923 Touring
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: Thrust washers
And steel thrust washers are kept from rotating by pins in the axle housings and on the differential cases.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
jab35
- Posts: 1001
- Joined: Sun Jan 06, 2019 12:28 pm
- First Name: James
- Last Name: Bartsch
- * REQUIRED* Type and Year of Model Ts owned: '26 Coupe
- Location: Dryden, NY 13053
- MTFCA Life Member: YES
Re: Thrust washers
Walter: If those pins are worn away or missing you need to install new ones before assembling the unit. The 'Axle Handbook" explains this. Without the pins holding the steel washers in place it's possible for the washers to ride on the axle shaft and wear a groove in the shaft. If this has already occured, I suggest replacing the axle out of safety concerns. Good luck.