1926 Dash board screws

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Posts: 170
Joined: Sat Jan 12, 2019 9:24 pm
First Name: Robert
Last Name: Govoni
Location: Fredericksburg, VA
MTFCA Number: 32331
Board Member Since: 2016

1926 Dash board screws

Post by Mopar_man » Thu Feb 06, 2020 10:19 pm

Is the dash on a 26 Touring held on with flat head bolts and washers that the head of the bolt fits into? Same to hold the steering column?

Howard Tomlinson
Posts: 18
Joined: Sun Jan 06, 2019 7:23 pm
First Name: Howard
Last Name: Tomlinson
Location: Orange VA

Re: 1926 Dash board screws

Post by Howard Tomlinson » Thu Feb 06, 2020 10:54 pm

Nickel plated oval head machine screws. Lang's sells them under "interior screw set". I can't find them locally.

Posts: 181
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
Location: Bartow, FL
MTFCA Number: 50126

Re: 1926 Dash board screws

Post by jiminbartow » Fri Feb 07, 2020 12:14 am

We have an old style hardware store here in central Florida called Crowder Brothers that has them. Some Ace Hardware stores have them too, in separate steel boxes in the fastener aisle. Jim Patrick

User avatar

George N Lake Ozark
Posts: 207
Joined: Sun Jan 06, 2019 2:15 pm
First Name: George P
Last Name: Clipner
Location: LakeOzark,Missourah
MTFCI Number: 18665

Re: 1926 Dash board screws

Post by George N Lake Ozark » Fri Feb 07, 2020 12:39 am

And held in place by square nuts on the backside

Posts: 1013
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
Location: Gawler, Australia

Re: 1926 Dash board screws

Post by Allan » Fri Feb 07, 2020 4:41 am

On our Canadian products I believe there are no cup washers. The panel itself has a raised lip around the holes, and the screws sit in this lip.And, they are Robertson screws wuth the square hole drive.

Allan from down under

Posts: 76
Joined: Tue Jan 08, 2019 6:04 pm
First Name: Kevin
Last Name: Whelihan
Location: Danbury, WI
MTFCA Number: 30688
Board Member Since: 2008

Re: 1926 Dash board screws

Post by Gonenorth » Fri Feb 07, 2020 9:23 am

You can get the screws at McMaster-Carr, Seems to me they are 1/4-20 oval head. Forget the length at the moment. Not real expensive.

Original Smith
Posts: 1199
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
Location: Lomita, California
MTFCA Number: 121
MTFCA Life Member: YES
MTFCI Number: 16310

Re: 1926 Dash board screws

Post by Original Smith » Fri Feb 07, 2020 10:32 am

I personally like stainless steel.

Post Reply Previous topicNext topic