Any one ever see a rear door like this on any 1909-12 T
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 1855
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
Any one ever see a rear door like this on any 1909-12 T
Looking at an unusual “early Ford T” to purchase. Looked more late 11 to early 12 put together. 9/10 steering column, split valve engine mid teens rear axle case and so forth. I can attest that the body is early but I don’t think Ford. What through me was the split front seats and rear doors with a slightly curved shape & bail handles. Anyone have an idea of the body?
Last edited by JTT3 on Sat Feb 22, 2020 7:11 pm, edited 1 time in total.
-
- Posts: 4249
- Joined: Sun Jan 06, 2019 3:13 pm
- First Name: Wayne
- Last Name: Sheldon
- * REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
- Location: Grass Valley California, USA
- Board Member Since: 2005
Re: Any one ever see a rear door like this on any 1909-12 T
What are the body mounts/brackets like? Even if they are Ford, was shimming or trimming required? Any holes or fillings to indicate other previous mounts? I am with you, I very much doubt that it was a Ford body originally.
Even Ford used outsourced bodies all through the '10s (and before), and many of the companies also produced bodies for other car manufacturers. Wilson produced bodies for dozens of other early automobiles including Cadillac and I believe I read Oldsmobile early on. Fischer in the '10s produced fine bodies for lots of companies. It was not uncommon for similarities to show upon other cars. There is a surviving Maxwell center-door sedan in very original condition. People that have looked it over closely say the body is nearly identical to the Ford center-door sedan, and original sales literature bears this out as being Maxwell original.
It sounds as if someone got a nice original body and built a Ford under it!
I seem to recall seeing an EMF/Flanders many years ago with a body very similar to this.
Even Ford used outsourced bodies all through the '10s (and before), and many of the companies also produced bodies for other car manufacturers. Wilson produced bodies for dozens of other early automobiles including Cadillac and I believe I read Oldsmobile early on. Fischer in the '10s produced fine bodies for lots of companies. It was not uncommon for similarities to show upon other cars. There is a surviving Maxwell center-door sedan in very original condition. People that have looked it over closely say the body is nearly identical to the Ford center-door sedan, and original sales literature bears this out as being Maxwell original.
It sounds as if someone got a nice original body and built a Ford under it!
I seem to recall seeing an EMF/Flanders many years ago with a body very similar to this.
-
- Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: Any one ever see a rear door like this on any 1909-12 T
Front seats: Ford Model early T (or possibly R or S) runabout. Top support holes plugged.
It's a marriage. To what/whom, I don't know. Maybe Wayne is right on the rear half. EMF had bale handles on the rear but the shape of the rear door doesn't look right for EMF.
It's a marriage. To what/whom, I don't know. Maybe Wayne is right on the rear half. EMF had bale handles on the rear but the shape of the rear door doesn't look right for EMF.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 425
- Joined: Sun Jan 06, 2019 1:07 pm
- First Name: Charley
- Last Name: Shaver
- * REQUIRED* Type and Year of Model Ts owned: 1913
- Location: MO
Re: Any one ever see a rear door like this on any 1909-12 T
here is a car that was put together in the 60s ,its on a 13 stude 35 who knows what the body is i have it now in maney pieces, it crashed on the highway.i have it all and will rebuild it for my 1911 russell knight if i live that long ha,ha. charley
- Attachments
-
- !cid_BF999ADF1D774F6D97D13069F9C577C5@hornsrusHP.png (126.3 KiB) Viewed 2501 times
-
- Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: Any one ever see a rear door like this on any 1909-12 T
John
am looking forward to your further assessment of this car.
I am still pretty sure front seat is runabout, but less sure it is Ford, though there have been some photos in the long-past which had very similar seat dividers.
am looking forward to your further assessment of this car.
I am still pretty sure front seat is runabout, but less sure it is Ford, though there have been some photos in the long-past which had very similar seat dividers.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured