26 Radiator Mount Question
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Scott C.
Topic author - Posts: 837
- Joined: Sun Jan 06, 2019 11:44 am
- First Name: Scott
- Last Name: Clements
- Location: Waynetown Indiana
26 Radiator Mount Question
I am working on my 26 Coupe replacing the wood blocks underneath of the hood shelfs and the hood latches. Should there be a rubber pad under the radiator mounts, or not?
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: 26 Radiator Mount Question
No just springs.
Go down to Saturday, January 10, 2015 - 12:30 am
http://www.mtfca.com/discus/messages/50 ... 1442012707
Go down to Saturday, January 10, 2015 - 12:30 am
http://www.mtfca.com/discus/messages/50 ... 1442012707
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
Scott C.
Topic author - Posts: 837
- Joined: Sun Jan 06, 2019 11:44 am
- First Name: Scott
- Last Name: Clements
- Location: Waynetown Indiana
Re: 26 Radiator Mount Question
Thanks!! There were pads there when I took it apart. I looked at the Vowell Art diagram and it did not show them. So, I wanted clarification before I put it back together.