Wondering if any of you have good infromation on this engine and or where I can go to get more information on it.
thanks in advance.
Meant to put this in the off topic, not sure how to move it now.
Help with steam engine id?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Angmar
Topic author - Posts: 341
- Joined: Sun Jan 06, 2019 7:11 pm
- First Name: Mark
- Last Name: Bailey
- * REQUIRED* Type and Year of Model Ts owned: 1918 Roadster P/U
- Location: Colorado
- Board Member Since: 2016
Help with steam engine id?
- Attachments
-
- Steam 1.jpg (105.96 KiB) Viewed 3435 times
Still crankin old iron
-
kevinf
- Posts: 130
- Joined: Sun Jan 13, 2019 9:17 pm
- First Name: Kevin
- Last Name: Fielding
- Location: Ewe-taw
Re: Help with steam engine id?
Try Smokestack, and list it in the steam forum. You might get lucky, just be aware there were a lot of jobbers building engines, some with very limited production. Good luck, Kevin
-
kevinf
- Posts: 130
- Joined: Sun Jan 13, 2019 9:17 pm
- First Name: Kevin
- Last Name: Fielding
- Location: Ewe-taw
Re: Help with steam engine id?
Sorry you will need to go to www.oldengine.com, and then go to the smokestack forum.
-
TRDxB2
- Posts: 6261
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Help with steam engine id?
Closest I could find. for "Vertical Steam Engine". There are many similar in shape but none with the same dual fly wheels. These were used in small locomotives, boats etc
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
RichardG
- Posts: 353
- Joined: Sun Jan 06, 2019 10:29 pm
- First Name: Richard
- Last Name: Grzegorowicz
- * REQUIRED* Type and Year of Model Ts owned: 1921 T pickup
- Location: Hartland VT
Re: Help with steam engine id?
most likely what you have is a Kerwood, made for sears and many other outlets, the only way to find for sure is the casting numbers IF there are any,, i have owned several over the years, i have a picture taken of me 50 years ago at a show with one i saved, it ran a sausage grinder in a butcher shop,in the day not every one had electric wiring and motors to do the work but they had boilers, i will find the photo to show, that type engine was refered to as a bottle engine, depending on boiler pressure 4-6 hp,
-
Herb Iffrig
- Posts: 1666
- Joined: Sun Jan 06, 2019 11:47 am
- First Name: Herb
- Last Name: Iffrig
- * REQUIRED* Type and Year of Model Ts owned: 1911 Torpedo, 1918 TT Hucksters
- Location: St. Peters, MO
Re: Help with steam engine id?
I have one that is similar in construction that is marked Climax.
-
Angmar
Topic author - Posts: 341
- Joined: Sun Jan 06, 2019 7:11 pm
- First Name: Mark
- Last Name: Bailey
- * REQUIRED* Type and Year of Model Ts owned: 1918 Roadster P/U
- Location: Colorado
- Board Member Since: 2016
Re: Help with steam engine id?
a few more photos. Thanks for the help guys.
- Attachments
-
- Steam 4.jpg (50.4 KiB) Viewed 2972 times
-
- steam 3.jpg (72.83 KiB) Viewed 2972 times
-
- steam 2.jpg (68.75 KiB) Viewed 2972 times
Still crankin old iron
-
TRDxB2
- Posts: 6261
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Help with steam engine id?
it would help to know what this says...
??canton Pump C0. A20?? Canton Ohio
??canton Pump C0. A20?? Canton Ohio
- Attachments
-
- pump 4.png (364.89 KiB) Viewed 2946 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
kevinf
- Posts: 130
- Joined: Sun Jan 13, 2019 9:17 pm
- First Name: Kevin
- Last Name: Fielding
- Location: Ewe-taw
Re: Help with steam engine id?
That last photo is of a duplex pump
Steam cylinders on one side and the pump cylinders on the other. Used as a boiler feed pump.
Steam cylinders on one side and the pump cylinders on the other. Used as a boiler feed pump.