Model T tappit VS Ford Y block tappit
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
got10carz
Topic author - Posts: 552
- Joined: Sun Jan 06, 2019 6:37 pm
- First Name: Steve
- Last Name: Meixner
- * REQUIRED* Type and Year of Model Ts owned: 1911,13,14,19,23,25,26,27
- Location: Moorhead MN
Model T tappit VS Ford Y block tappit
Posting this for FYI. T body is 7/16". Y block is 1/2 with a divot in the top for push rod. Foot is the same size. I understand why this conversion is convenient for OHV.
- Attachments
-
-
-
Jerry VanOoteghem
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: Model T tappit VS Ford Y block tappit
I used the Y-Block tappets in my Model N engine rebuild. Just ground the tops down till the cup was gone.