Horn replacement
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Jfmarkham
Topic author - Posts: 33
- Joined: Mon Jan 21, 2019 3:15 pm
- First Name: John
- Last Name: Markham
- * REQUIRED* Type and Year of Model Ts owned: 1923 pie wagon
- Location: New york
Horn replacement
The horn on my T died, I bought a Sparton #9 on ebay but the bolts on the cover are farther apart than the old one and don't fit the bracket, my bracket the holes are 2 inches apart,the new horn they are 2 1/2 inches apart anyone know where I can get a bracket to fit this horn?
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Horn replacement
John, it might be quicker to make am adaptor to get from a Ford bracket to the new one.
Allan from down under.
Allan from down under.
-
MichaelPawelek
- Posts: 712
- Joined: Sun Jan 06, 2019 2:01 pm
- First Name: Michael
- Last Name: Pawelek
- * REQUIRED* Type and Year of Model Ts owned: 1919 Touring, 1925 Coupe
- Location: Brookshire, Texas
- Board Member Since: 1999
Re: Horn replacement
Can you just drill one new hole and adapt?
-
Jfmarkham
Topic author - Posts: 33
- Joined: Mon Jan 21, 2019 3:15 pm
- First Name: John
- Last Name: Markham
- * REQUIRED* Type and Year of Model Ts owned: 1923 pie wagon
- Location: New york
Re: Horn replacement
Thanks everyone, found correct bracket