I have a 25' Coupe that I am working on getting as period correct as I can.
This is my visor, it has philips' head screws and chrome acorn nuts threaded through the material. I have not been able to study other cars up close, anyone know the proper hardware to use on this visor? I am planning on buying a kit to recover it as well, any tips or tricks to it?
1925 Sunvisor Hardware
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 6895
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
Re: 1925 Sunvisor Hardware
They were riveted.
http://www.mtfca.com/discus/messages/708324/780403.jpg
http://www.mtfca.com/discus/messages/708324/780403.jpg
When did I do that?
-
- Posts: 6895
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
Re: 1925 Sunvisor Hardware
I hope you can tell what they look like from these. It wasn't good for pictures today.
Rich
I used some screws and nuts and ground them to look like rivets on mine.
I hope this helps.Rich
When did I do that?
-
Topic author - Posts: 553
- Joined: Wed Jul 28, 2021 7:17 am
- First Name: Tad
- Last Name: Glahn
- * REQUIRED* Type and Year of Model Ts owned: 1925 Coupe, 1926 TT Closed Cab, 1924 Runabout
- Location: Grant's Lick, Kentucky
- Board Member Since: 2021
Re: 1925 Sunvisor Hardware
Thank you again Mr. Eagle.