I picked this up on an auction over the weekend. Rusty but there's absolutely no play in the gears and babbitt bearings. My thought is it was mounted and twisted the end of the crankshaft off. Promptly removed and put on a shelf. Anyone have one like it? Anyone using one? Any info will be appreciated!
Thanks!
Mike
Belt pulley accessory for a model T
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 692
- Joined: Sun Jan 06, 2019 11:00 am
- First Name: Michael
- Last Name: Peternell
- * REQUIRED* Type and Year of Model Ts owned: TT gas truck, T tractor conversions, '15 touring, '17 speedster, '26 16 valve speedster
- Location: Albany mn
-
- Posts: 3813
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: Belt pulley accessory for a model T
This post has lots of info if you open the link embedded in this thread
https://www.mtfca.com/discus/messages/4 ... 1408370269
https://www.mtfca.com/discus/messages/4 ... 1408370269
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Topic author - Posts: 692
- Joined: Sun Jan 06, 2019 11:00 am
- First Name: Michael
- Last Name: Peternell
- * REQUIRED* Type and Year of Model Ts owned: TT gas truck, T tractor conversions, '15 touring, '17 speedster, '26 16 valve speedster
- Location: Albany mn
Re: Belt pulley accessory for a model T
Thanks Dan! Very appreciated. Odd it didn't show up when I put it in my googler.