"The car was barn find and driven as it was for a few miles.
Than there was some noice the car lost traction and the brake failed".
Here is what I found.
Next step will be the rear axle inspection but I think it will be no better.
Andre
Belgium
There was some noice on the driveshaft and the car stopped.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
AndreFordT
Topic author - Posts: 514
- Joined: Sun Jan 06, 2019 12:25 pm
- First Name: Andre
- Last Name: Valkenaers
- * REQUIRED* Type and Year of Model Ts owned: 1926 ; 1922 ; 1915.
- Location: Scherpenheuvel
-
Jim Eubanks
- Posts: 217
- Joined: Mon Jan 07, 2019 6:04 pm
- First Name: Jim
- Last Name: Eubanks
- * REQUIRED* Type and Year of Model Ts owned: 1926 touring, 1927 cpe
- Location: Powell, TN
Re: There was some noice on the driveshaft and the car stopped.
babbit washers failed on either side of the ring gear causing the ring gear and pinion to go half mesh which stripped things.