Babbit Question, Dross
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
got10carz
Topic author - Posts: 552
- Joined: Sun Jan 06, 2019 6:37 pm
- First Name: Steve
- Last Name: Meixner
- * REQUIRED* Type and Year of Model Ts owned: 1911,13,14,19,23,25,26,27
- Location: Moorhead MN
Babbit Question, Dross
Has anyone tried using a heavy gas such as argon to reduce the amount of dross created? It would certainly stay in the melting pot.
-
BUSHMIKE
- Posts: 354
- Joined: Tue Nov 01, 2022 6:46 am
- First Name: Mike
- Last Name: Cushway
- * REQUIRED* Type and Year of Model Ts owned: 1925 TT, 1926 TT, 1926 TT
- Location: Trout Creek, MI
Re: Babbit Question, Dross
A small bit of beeswax, the size of a marble, added to and stirred into the melted babbitt just before pouring will put most of the tin back in suspension. The “dross” in most cases is the separation of tin or other alloys. Skimming and removing it can dramatically change the alloy percentage. I dont like the smoke created from beeswax, so just use dead dry pine shavings. You will be pleasantly surprised at how much of the dross goes back into the melt when fluxing it.