I am in the process of making a couple new clutch drums. The only dimension I am missing is from the face the washers right against to the set screw hole. Obviously that is critical. I know there were two different numbers for early cars and late cars. At least that is what I understand. Does anybody have that dimension or a drawing?
Thank you in advance.
New clutch drum
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
greenacres36
Topic author - Posts: 156
- Joined: Sun Sep 27, 2020 3:50 pm
- First Name: Brian
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 1926 Tudor, 1915 Runabout
- Location: Prospect, Ohio
-
Dan McEachern
- Posts: 1402
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: New clutch drum
No dims, but__________https://www.mtfca.com/phpBB3/viewtopic.php?f=2& ... +b#p218965
-
Joe Bell
- Posts: 1174
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
Re: New clutch drum
Brian I have boxes of them, you are welcome to what you need, I am in Tiffin Ohio!
-
greenacres36
Topic author - Posts: 156
- Joined: Sun Sep 27, 2020 3:50 pm
- First Name: Brian
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 1926 Tudor, 1915 Runabout
- Location: Prospect, Ohio
Re: New clutch drum
I sent a pm to you Joe