Just finishing up the top installation and was wondering if anyone had a picture of how the hide em welt finishes up with the top right at the cab bucket armrest? I know it terminates with a buckle tip. Here’s a couple pictures of where my installation sits leading up to that spot before final fastening, trimming and hide em welt. I’ve tapped and screwed in the lift the dot fasteners inside the top iron (yes, I know, they should be push button fasteners and body sockets), and will install the lift the dot plates in the top flap.
Happy 4th! First year I haven’t had a running T for the parade!
26-27 top installation help!
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
fordt
Topic author - Posts: 162
- Joined: Wed Jun 19, 2019 5:21 pm
- First Name: Rob
- Last Name: Trippet
- * REQUIRED* Type and Year of Model Ts owned: 27 Roadster PU (in progress)
- Location: Comfort, TX
26-27 top installation help!
- Attachments
-
-
-
DanTreace
- Posts: 3812
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: 26-27 top installation help!
These may help.
- DCP_3042.JPG (127.48 KiB) Viewed 1023 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
fordt
Topic author - Posts: 162
- Joined: Wed Jun 19, 2019 5:21 pm
- First Name: Rob
- Last Name: Trippet
- * REQUIRED* Type and Year of Model Ts owned: 27 Roadster PU (in progress)
- Location: Comfort, TX
Re: 26-27 top installation help!
Perfect! But I fear my corner top piece is coming a little too far forward of the top iron. This’ll be one of those the next time you do it it’ll be easier and hopefully look better moments!
-
Humblej
- Posts: 1957
- Joined: Sun Jan 06, 2019 12:23 pm
- First Name: Jeff
- Last Name: Humble
- * REQUIRED* Type and Year of Model Ts owned: 1926 Canadian coupe, 1924 TT C-cab, 1924 runabout
- Location: Charlevoix, Mi
- Board Member Since: 2006
Re: 26-27 top installation help!
Correct spacing of the bows to Ford specs is critical for a proper fitting top.
-
John Codman
- Posts: 1481
- Joined: Mon Jan 07, 2019 10:27 am
- First Name: John
- Last Name: Codman
- * REQUIRED* Type and Year of Model Ts owned: 1927 Youring
- Location: Naples, FL 34120
Re: 26-27 top installation help!
Mine is a touring car, the method of top attachment appears to be pretty much the same, but you probably should use a roadster pickup as your model.