What are you bringing to Luray?? Post it here to let us know.

[James_Lyons-WV]

We are less than two-months away from Luray!! (May 10 & 11 for the Swap meet, and May 12-14 for the MTFCI Spring Regional Tour!!)

I am bringing:
Model T engine parts
Dodge Brothers Model T Front axle
1918 Coil Box - beautifully restored.
Nice looking Black - n - brass era, Brass Radiator
Various other Model T related items

I'm also bringing some Maxwell 2-cylinder parts.
And I have a mostly restored 1911 Maxwell AB Southern Wide-Track for $12,000. I am not bringing it, but I will show you photo's, OR better yet, you can stop and see it on your way home up I-81 and see it yourself!

Post what you are bringing along or what you hope to find at the meet!!!
See you in May, at Luray!!!

For more information on the meet, go to: www.mapwsm.com

[J1MGOLDEN]

Hi James:

I have a lot of Model T parts, especially way too many good transmissions and the remain of the many parts from two estate sales that I agreed to help sell.

Also a few early fire truck parts.

[dobro1956]

Can someone post lots of photos of the parts and some good photos of the layout of the swap meet. We can not go this year. But we may want to bring a good size load to the swap meet in 2025. Also is there camping or room for a RV.

[Dan Hatch]

Here is link to their website
https://www.mapwsm.com/
You can google the address of VFW and look at the site. I think they allow camping on the swap spaces plus there is campgrounds close by.
Very beautiful country there.

And there is a vendor dinner one night at VFW too. Those guys do a great job.

[Dennis Fleming]

Hey Donnie,
Here is the field layout 2023 w/ vendor names.
We set this up at the entrance of the swap meet.
Camping on site is permitted. The VFW is trying to get shower rooms installed on site as well.
Hope this helps.
We are old school

[Terry_007]

Really looking forward to it. I'll have a good selection of brass stuff-some lamps, burners, accessory items, early misc literature and some nice quality automobilia-the real suff! Will also be bringing a few antique toys and a nice selection of automobile related sheet music or those who collect it or want to start. As usual, I'll bring a selection of spark plugs for collectors. Always looking to add something to my collection too so let me know if you're bring any early plugs.
See you in May.
Terry

[pkhammer]

Planning to bring a full trailer of Model T and A parts. Windshield frames, wheels, rims, headlights, coil boxes, steering columns, Model A front end assy (axle, spindles, spring, wishbone), A radiators, T carburetors, couple fenders, running boards, toolbox, firewalls, grille shells, steering wheels, axle housings, Good A flywheel housings, transmission parts, etc. Have a 1918 engine and a 1914 block I could bring if any interest. Might be bringing a 1928 Model A Roadster to sell.
What do you need?

[pkhammer]

Oh, I also have some Model A and T Crankshafts (some turned) and a couple T camshafts. I'm not a rebuilder so these will go to someone that can use them for a great price!!

[dobro1956]

Thanks for the info. It looks very promising. Will be 2025 for us. Looks like We will need 3 spaces. I'll have the same kind of stuff we took to Chickasha. Hope to see some old friends and also some new ones.

[tom_strickling]

Reverse Pedal Extension in aluminum and BRASS.

4 early Model A wheels.
Model T Front fenders.
D handle pull starter for the Model T.
Model T snowmobile skis.
TT rear springs.
Various TT parts
TT rear wheels...need restored.
Detachable transmission bands
Acccessory HUDCO Hogshead that actually comes apart to make band changing easier.
1 AA rear wheel.

Possibly a TT frame or a TT rolling chassis with no engine or steering wheel. I would need a commitment to buy before loading them.

[tom_strickling]

LUray anyone else???

[DanTreace]

Bringing many boxes of smaller T parts, one Disteel wheel, older but new like tread Wards Riverside clincher tire, 26-27 front axle, 26-27 headlamps and bar, 26-27 wire wheel front and rear hubs, coil box wood kit...many more things for the old Ford.

Come by and look and buy, sorry no early prices or shipping on these goodies, you have to be there .

[tom_strickling]

ALSO Bringing VISOR KITS for 23-25 closed cars. Not available in catalogs, I have 2 more sets to sell and no plans on making more.
\1 frame and 2 brackets, no fabric, but it is available in the catalogs.

[SteveD]

I'm looking for a set of rear radius rods. Anyone have a set they're bringing?

[Dan Hatch]

You need tell what year RR you are looking for. Makes a difference.

[SteveD]

Thanks Dan. Well, I'm fixing a large drum rear. It's going in my 25

[Jones in Aiken SC]

Who is bringing the 1911/1912 brass parts? The good stuff.....

[Oldav8tor]

Three new, unused, zinc plated, 30 x 3.5 inch demountable clincher rims from Vintage rims of Australia. Important note - they only work with Kelsey felloes. Contact me if you want more info.

[pkhammer]

[image]Planning to bring this nice little 1928 Roadster recently found in a shed in the Blue Ridge Mountains.

[Don Demio]

LOOKING FOR Model T Ford keys (numbered, coil box, blank, riveted master & loose master) to add to my collection and to spend some time with many Model T Ford Folks.

[pkhammer]

I also have some larger, heavier parts nearby that I can bring if anyone needs them such as a complete engine (later with starter) -$125.00, two rear ends complete -$50.00 each, and lots of other stuff.

[Racer_22]

Bringing an unrestored 1919 roadster with rebuilt engine. High speed TT ring and pinions 2 are used and good and 1 is new. High compression heads, gas tanks oval and round, high volume oil line kits, T/A crank 4 dipper pan spacers and alot of good misc T parts. Stay tuned Ill be posting what else. Email me at kprus@zoominternet.net for pics of car and what your looking for.
Kevin Prus

[mike catlin]

Looking for a ignition switch for a 1920 to 1925 t

[pkhammer]

I have some crankshafts, cams and rods if anyone can use them. One Model T and one model A crank appear to have been cleaned and turned. Hoping to find someone that can use these items and willing to sell very reasonably.

[Jones in Aiken SC]

I'm interested in both the A and T cranks. I am going to Luray.....

[pkhammer]

Awesome! I sent you an email.

[J1MGOLDEN]

I'm bringing a 1917 Prototype of the TT Truck that has a total frame off restoration, rebuilt engine with a 1920 rebuilt transmission and a starter attached, a set of recently new Wards Riverside tires and the longer TT new wood box.

[RVA23T]

Engine # 2682244 with May 11, 1918 casting date, non-generator, turns with a hand crank.
Engine # 6592041 w/transmission, had Starter & Generator. Turns with a hand crank.
Chevy/Jaxon Disc Wheels,6-Lug,21” 20”. Have extra rims for both sizes. Also have 2 sets of 6 lug to model T adaptors.
2 generators for cores
2 flywheels.
EA model F 6v horn for restoration.
parts from 2 or 3 broken down transmissions and 2 or 3 differentials.
Various & many other T parts.

[Racer_22]

Im bringing my new Prus 280 T camshafts. I picked them up from the manufacture last friday.Just had a couple hundred produced. They are selling fast. Will have some available for Luray.

[George Danek]

’17-’22 parts, Runabout top irons, NOS hood, Windshield, L&R front fenders, Front Square fellow wheels, Set of square fellow wheels with good tires, Radiator, Turtle deck with flat handles, much more. See you there.

[Jim Suter Virginia]

Will have a general mix of T parts, Carbs., Wheels, Coil Boxes, etc.
* Engine Blocks:
1915, 5/11/15 casting date, # 9291xx, light pitting on three valve seat areas to heavy pitting in one valve seat area, std. bore, Fair Condition.
1920 Two Valve Plate Block, Std. bore, No.#, Good
1921 #45009xx, Std. bore. Good

* 1923 Engine/Trans #67130xx, turns free, good. Will leave this at home unless someone makes a commitment prior to Luray.

* One NRS & Early 09, Straight Hub Rear Wheel Assy., hub has a crack ( I believe it can be repaired), drum, wood is not that good, Fair Condition.

* Vintage Ford Magazines in 1990's

* One pair 1915 Rear Axle Housings, good

Come and take a look at the parts I have or send a friend to do your buying, no shipping, just be there. THANKS, JIM
Cell: 5 four 0, 8 two 0, two 0 one 3, no text please.

[Bryant]

Im bringing my new Prus 280 T camshafts. I picked them up from the manufacture last friday.Just had a couple hundred produced. They are selling fast. Will have some available for Luray.

What’s the going rate for your cams?
Bryant

[Racer_22]

Cams are $525.00 plus shipping. Get them at Luray and save shipping. I will have a limited number at the swapmeet. They are flying out the door. Response has been great.

[Howard Tomlinson]

I'll be bring a load of parts from Orange Va.

21" wheel fellows, clipped springs, running boards, coil boxes, misc. carbs, 26-27 and low firewalls, engine front plates, orig. cranks, rebuilt 1927 engine/trans, plus whatever else I can load up.

WANTED: The metal panel that goes under a 1921 roadster seat (covers the gas tank).

Thanks,
Howard

[Dennis Fleming]

I will have a KR Wilson combination machine setup for model T and a KR Wilson rearend stand. Low 17-21 radiator shell nice. 20’s era Side lights and many T era Spark plugs. Plus much more.

[Dennis Fleming]

Oh by the way the weather is now looking pretty good for Luray.

[sweet23]

I am bringing North Carolina sunshine, and an umbrella just in case! Will have vintage ford tools & jacks, along with some other wonderful items .