I have a 1907 engine and transmission that is ready to go into the car, but the transmission needs to be adjusted. I’m not sure how to do that. Can you guide me to someone who may be able to help?
Tom Rowett
1907 Model R Ford
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
jlrowett@gmail.com
Topic author - Posts: 1
- Joined: Mon Jan 13, 2025 1:00 pm
- First Name: Tom
- Last Name: Rowett
- * REQUIRED* Type and Year of Model Ts owned: 1923 Touring
- Location: Spearfish SD
-
DHort
- Posts: 2826
- Joined: Sun Jan 06, 2019 1:30 pm
- First Name: Dave
- Last Name: Hjortnaes
- * REQUIRED* Type and Year of Model Ts owned: 24 Speedster, 20 touring
- Location: Men Falls, WI
Re: 1907 Model R Ford
Paul Schaefer in Ohio is probably your best bet. I do not have his number, but he is on the forum.
Go to 'Extra Quick links' on top right and enter his name. You can contact him that way.
Go to 'Extra Quick links' on top right and enter his name. You can contact him that way.
-
DanTreace
- Posts: 3813
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: 1907 Model R Ford
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Jerry VanOoteghem
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: 1907 Model R Ford
Tom,
Is the transmission fully assembled? Is it installed in the transmission frame and attached to the engine?
Is the transmission fully assembled? Is it installed in the transmission frame and attached to the engine?