Saw this the other day, what are your thoughts. My first thought, how would you set the floats? Looks like they are headed down hill???
Original or home made?
Not mine just interesting, worthy of some discussion
Kevin
https://www.ebay.com/itm/156704089088?i ... 247c4aa400
Zenith dual intake
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: Zenith dual intake
Ya they do look like going downhill but that was not where my mind went when seeing it, I was thinking how would that fit in that area, it is tight anyway.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
TRDxB2
- Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Zenith dual intake
Photos may be slightly distorting the setup
The manifold legs are turned outward for clearance and access. But there is an issue with the hole in the center of the manifold, it goes through to the other side.
The manifold legs are turned outward for clearance and access. But there is an issue with the hole in the center of the manifold, it goes through to the other side.
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: Zenith dual intake
So the carbs sit "over" the frame rail not between it and the block like stock? That is what I was talking about. In the photo, eBay listing, they didn't look short enough to go over the top of the frame.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup