fore and aft slack
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
r4rabbitx
Topic author - Posts: 2
- Joined: Wed May 07, 2025 1:40 pm
- First Name: Reni
- Last Name: wayne
- * REQUIRED* Type and Year of Model Ts owned: 1926 Ford Model T touring
- Location: Sacramento Ca
fore and aft slack
On a Model T Generator , how much fore and aft slack is allowable in a 26-27 Model T generator? The gear seems to be tight on the shaft and the generator works normally, but I can move the shaft back and forth about 3/32".
-
speedytinc
- Posts: 4904
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: fore and aft slack
Minimal to none.
There are spring steel bearing tensioner spacers available to go under the rear bearing to take away that slop.
You can also drop in an extra generator felt seal in under the bearing that will take out the play.
There are spring steel bearing tensioner spacers available to go under the rear bearing to take away that slop.
You can also drop in an extra generator felt seal in under the bearing that will take out the play.