Help received from a Simmons/Wizard carb owner - THANK YOU

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Scott_Conger
Posts: 6658
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: 1919
Location: not near anywhere, WY
Board Member Since: 2005

Help received from a Simmons/Wizard carb owner - THANK YOU

Post by Scott_Conger » Tue Dec 09, 2025 4:40 pm

I foolishly sold my last complete Wizard awhile ago, and now cannot find my sketch of the adjuster needle - I have some basic measurements but not a couple details that I'd like to have.

Here is a new adjuster needle and I would like someone with an AUTHENTIC Wizard carb that isn't on their car to please compare the visual of my needle to theirs...I am not sure if the threads need to go all the way to the end of the brass or not. I have a Wizard carcass, minus the needle and my part seems to fit just fine but I'd like to be sure, so if you have one on the shelf please consider taking a moment and comparing my picture to your actual part.

Many thanks and regards

IMG_20251209_141652~2.jpg
Last edited by Scott_Conger on Tue Dec 09, 2025 5:47 pm, edited 1 time in total.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Top
User avatar

Pep C Strebeck
Posts: 615
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI

Re: Requesting help from a Simmons/Wizard carb owner

Post by Pep C Strebeck » Tue Dec 09, 2025 5:29 pm

Scott, I sent you a PM.

IMG_7300.JPG
IMG_7301.JPG
IMG_7302.JPG
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
Top

Topic author
Scott_Conger
Posts: 6658
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: 1919
Location: not near anywhere, WY
Board Member Since: 2005

Re: Requesting help from a Simmons/Wizard carb owner

Post by Scott_Conger » Tue Dec 09, 2025 5:40 pm

Joseph

Message received and THANK YOU!!!
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”