Clock refinishing

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Tbird
Posts: 157
Joined: Sun Jan 06, 2019 6:51 pm
First Name: Mike
Last Name: Bird
Location: Goshen IN

Clock refinishing

Post by Tbird » Tue Aug 20, 2019 1:32 pm

I have a Phinney Walker Brass clock. It runs great, but the slivering is all gone. The face is brass. The numbers and lines could use a little touch up with the black wax. Here’s my question. Have you used/ done any of the slivering face before? Results? which kit did you use?
Thanks guys


donald4ham
Posts: 81
Joined: Tue Jan 08, 2019 12:19 pm
First Name: Donald
Last Name: Goodwin
Location: Medina Ohio
Board Member Since: 2018

Re: Clock refinishing

Post by donald4ham » Tue Aug 20, 2019 3:12 pm

check Merritts clock parts in Pa., they sell dial reslivering kits.


Mark Osterman
Posts: 653
Joined: Mon Jan 07, 2019 10:18 pm
First Name: Mark
Last Name: Osterman
Location: Rochester, NY

Re: Clock refinishing

Post by Mark Osterman » Tue Aug 20, 2019 6:44 pm

If it’s actually brass .. polish the brass first. Then make a paste of silver nitrate, calcium carbonate and either potassium cyanide or sodium thiosulfate. Rub this onto the brass and it will deposit pure silver.

Post Reply Previous topicNext topic