Carbide generator instructions
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 1551
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- Location: Norwalk Ohio
Carbide generator instructions
This is courtesy of a good friend. He has a NOS generator he received from the original owner 50 years ago. This was inside it.
-
- Posts: 164
- Joined: Sun Jan 06, 2019 11:43 am
- First Name: Darren
- Last Name: Wallace
- Location: Woodstock, Ontario, Canada
- Board Member Since: 2005
- Contact:
Re: Carbide generator instructions
Hi Tim, any way I could get a nice scan of that for my generator? Thanking you in advance, Darren 

1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars
-
Topic author - Posts: 1551
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- Location: Norwalk Ohio
Re: Carbide generator instructions
It was offered and I didn’t want to take it last night, so had wifey take a quick pic. I will get it scanned and then forward to you and anyone else that wants it. Might be later this week. T
-
- Posts: 187
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John T
- Last Name: Tannehill III
- Location: Hot Coffee, MS
Re: Carbide generator instructions
Nice of you to offer the scan Tim. Looks like it’s for a Victor based on the “hook” mention in the drip regulation. Still very usable no matter what type carbide generator. Best John
-
- Posts: 33
- Joined: Sun Jan 06, 2019 5:24 pm
- First Name: Bob
- Last Name: Bishop
- Location: San Diego, CA
- MTFCA Number: 502
- MTFCA Life Member: YES
- Board Member Since: 2001
Re: Carbide generator instructions
Hi Tim,
Maybe you could just post the scan on here? Might save you some time as I would imagine there are more than a few of us that would appreciate a copy of that!
Thank you.
Maybe you could just post the scan on here? Might save you some time as I would imagine there are more than a few of us that would appreciate a copy of that!
Thank you.
Bob Bishop
San Diego, CA
1914 touring, 1917 touring
San Diego, CA
1914 touring, 1917 touring
-
- Posts: 146
- Joined: Sun Jan 06, 2019 4:36 pm
- First Name: Dom
- Last Name: Denio
- Location: Tennessee
- MTFCA Number: 27167
- MTFCI Number: 20405
Re: Carbide generator instructions
Tim,
Thanks for posting this. Attached is a MS Word document that I typed. Feel free to copy for your use.
Have a great day,
Dom
Thanks for posting this. Attached is a MS Word document that I typed. Feel free to copy for your use.
Have a great day,
Dom
Last edited by Dom Denio on Tue Oct 15, 2019 7:25 pm, edited 1 time in total.
-
Topic author - Posts: 1551
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- Location: Norwalk Ohio
Re: Carbide generator instructions
Glad to do it. I’ll have to get some help from granddaughter to post here. Ill have to get granddaughter to help as that’s beyond my two fingered iPad skills. I’ll probably get a small stack of color copies, too.
-
- Posts: 146
- Joined: Sun Jan 06, 2019 4:36 pm
- First Name: Dom
- Last Name: Denio
- Location: Tennessee
- MTFCA Number: 27167
- MTFCI Number: 20405
Re: Carbide generator instructions
Another set of Carbide Generator Directions I found on the internet.
Enjoy,
Dom
Enjoy,
Dom
-
- Posts: 187
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John T
- Last Name: Tannehill III
- Location: Hot Coffee, MS
Re: Carbide generator instructions
Way to go Dom, thank you.