13 pinnion gear
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Rich Huggins
Topic author - Posts: 107
- Joined: Sat Oct 12, 2019 7:56 am
- First Name: Rich
- Last Name: Huggins
- * REQUIRED* Type and Year of Model Ts owned: 1923 touring- 1922 deverley truck -1922 center door
- Location: Maricopa AZ
- Contact:
13 pinnion gear
high gear ratio 13 tooth pinnion install on 40 tooth stock ring gear can i do it 1923 t touring 3speed bg warnner t 90 trans
-
Ruxstel24
- Posts: 2345
- Joined: Sun Jan 06, 2019 11:25 am
- First Name: Dave
- Last Name: Hanlon
- * REQUIRED* Type and Year of Model Ts owned: 24 Touring car
- Location: NE Ohio
- Board Member Since: 2018
Re: 13 pinnion gear
You can use a 40 tooth gear with a 13 tooth pinion, but not a stock ring gear.
It has to be recessed on the backside to position it to the left a little, to be able to get the proper depth of the pinion. 3.076 is the ratio.
It has to be recessed on the backside to position it to the left a little, to be able to get the proper depth of the pinion. 3.076 is the ratio.
-
Rich Huggins
Topic author - Posts: 107
- Joined: Sat Oct 12, 2019 7:56 am
- First Name: Rich
- Last Name: Huggins
- * REQUIRED* Type and Year of Model Ts owned: 1923 touring- 1922 deverley truck -1922 center door
- Location: Maricopa AZ
- Contact:
Re: 13 pinnion gear
Were do i find the proper ring gear 40 tooth with recess