Does anybody in Model T hobby do small parts chrome plating?
Jim B
plating
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Jim Bowery
Topic author - Posts: 29
- Joined: Mon Jan 07, 2019 5:59 am
- First Name: Jim
- Last Name: Bowery
- * REQUIRED* Type and Year of Model Ts owned: 26 Roadster, 27 Touring, 26 Depot Hack
- Location: Wellsburg, WV
- MTFCA Number: 19036
- MTFCI Number: 14288
-
CudaMan
- Posts: 2402
- Joined: Fri Jan 04, 2019 4:17 pm
- First Name: Mark
- Last Name: Strange
- * REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
- Location: Hillsboro, MO
- MTFCA Number: 30944
- MTFCI Number: 23667
- Board Member Since: 2013
Re: plating
You may already know this, but Model T parts were nickel plated from the factory, not chrome. I have had good luck using a Caswell nickel plating kit to plate my own small parts (after I clean and polish them of course, and no, I don't plate parts for other people). Here is a link to Caswell's website:
https://www.caswellplating.com/electrop ... izing.html
https://www.caswellplating.com/electrop ... izing.html
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
-
Rich Eagle
- Posts: 6815
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
- MTFCA Number: 1219
- Contact:
Re: plating
We have a small shop a few miles away that does great nickel for me. If I take it there already polished it saves some money. Nickel has gotten more expensive than it was when I did most of my small parts. I would think there are several plating shops in your area that could do what you want. A smaller shop might be more welcoming to the little stuff.
Hope you find what you need.
Rich
Hope you find what you need.
Rich
When did I do that?
-
Original Smith
- Posts: 3298
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Number: 121
- MTFCA Life Member: YES
- MTFCI Number: 16310
Re: plating
Don't go to a regular chrome plating shop. The nickel they use doesn't stand up like the old stuff does. I have a couple of plating shops I use, and all I need to do occasionally is wipe it off with a soft cotton rag.
-
TRDxB2
- Posts: 5460
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: plating
You might consider DIY. There are several YOUTUBE videos showing how its done. Look at several before you decide go/no go. Besides all the chemicals you'll need a good voltage source. Here is one video https://www.youtube.com/watch?v=Qi-tK1jwO-k (skip the ads)
I'm thinking of re-plating some coil box terminal bolts in copper for fun - sounds easy and a a learning process to do nickle.
I'm thinking of re-plating some coil box terminal bolts in copper for fun - sounds easy and a a learning process to do nickle.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger