Stevens Tooling is In. FS video added

Post parts wanted or for sale here
Post Reply Previous topicNext topic

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Stevens Tooling is In. FS video added

Post by Dan Hatch » Thu Dec 29, 2022 4:14 pm

New batch of Stevens Front Axle Tooling is done. Those that pre ordered will be receiving total soon. There are a few sets left, so if you want a set you better jump on these. Due to the price increase there may not be any more.
These are only being sold in sets, one top (tapered) reamer and one reamer/tap (bottom).
Price is $475 for the set + shipping.
Email me at address in pictures. Thanks Dan

Also available will be bronze thrust washers @ $7.50 each.
Top reamer
Top reamer
Reamer/tap bottom
Reamer/tap bottom
97C4F6D4-8B70-41B9-8A92-341651BD839B.jpeg
97C4F6D4-8B70-41B9-8A92-341651BD839B.jpeg (34.02 KiB) Viewed 2187 times
Been ask about thrust washers. They are for protection of the Stevens frame. Here is a picture of where they are used.
110688F6-AC36-4D68-B35A-87E21A3514C1.jpeg
Last edited by Dan Hatch on Sun Jan 01, 2023 4:15 am, edited 3 times in total.
Top

Wayne Mims
Posts: 140
Joined: Sun Jan 13, 2019 11:49 am
First Name: Ervin
Last Name: Mims
* REQUIRED* Type and Year of Model Ts owned: 12 rdstr 13 tor 14 tor 15 pickup 22 drs coupe 21 center door
Location: Las Vegas

Re: Stevens Tooling is In. FS

Post by Wayne Mims » Thu Dec 29, 2022 4:54 pm

My name is Wayne Mims I want to set call me I will give you a credit card number and it will be done please my number is 702-354-63 65
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS

Post by Dan Hatch » Fri Dec 30, 2022 2:43 pm

Wayne: Send me an email to address in pictures. Thanks Dan
Top

FordFool
Posts: 168
Joined: Mon Jan 28, 2019 4:49 pm
First Name: Don
Last Name: Kirtley
* REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
Location: Devore, CA
Board Member Since: 2009

Re: Stevens Tooling is In. FS

Post by FordFool » Fri Dec 30, 2022 5:50 pm

Dan. I’ll take a set. Let me know the total cost and I’ll send you a check. Don
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS

Post by Dan Hatch » Sat Dec 31, 2022 3:05 pm

Back to the top
Top

FordFool
Posts: 168
Joined: Mon Jan 28, 2019 4:49 pm
First Name: Don
Last Name: Kirtley
* REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
Location: Devore, CA
Board Member Since: 2009

Re: Stevens Tooling is In. FS

Post by FordFool » Sat Dec 31, 2022 3:50 pm

Dan am I on your list?
Top

RGould1910
Posts: 1128
Joined: Tue Jan 22, 2019 8:16 am
First Name: Richard
Last Name: Gould
* REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
Location: Folsom, CA

Re: Stevens Tooling is In. FS

Post by RGould1910 » Sat Dec 31, 2022 5:10 pm

Dan Ill take a set and some inserts. Email sent
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS

Post by Dan Hatch » Sat Dec 31, 2022 6:56 pm

Don check your email
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS

Post by Dan Hatch » Sat Dec 31, 2022 9:05 pm

I have gotten some request about how a Stevens Front Axle tool works. Here is a link to me repairing an axle with one. Thanks to Bill for making this available.
https://www.youtube.com/watch?v=7DNGT7P79vg
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS video added

Post by Dan Hatch » Mon Jan 02, 2023 5:39 am

Back to the top
Top

Harry Lillo
Posts: 327
Joined: Fri Jan 04, 2019 10:18 pm
First Name: Harry
Last Name: Lillo
* REQUIRED* Type and Year of Model Ts owned: Speedsters, racers, depot hack, coupe
Location: Calgary

Re: Stevens Tooling is In. FS video added

Post by Harry Lillo » Mon Jan 02, 2023 1:18 pm

Dan,
Thank you for the video.
When you complete the reaming for the cone insert,
do you attempt to leave the top of the cone level with the top
of the axel or just a little proud (above the top)?
Harry Lillo Calgary
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS video added

Post by Dan Hatch » Mon Jan 02, 2023 2:38 pm

Little above. I am still going to send you the instructions. Just have to scan again, that file got lost. Been too busy to stop and do it. Please be patient with me. Thanks Dan
Top

Topic author
Dan Hatch
Posts: 5018
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Stevens Tooling is In. FS video added

Post by Dan Hatch » Tue Jan 03, 2023 11:42 am

Back to the top
Top
Post Reply Previous topicNext topic

Return to “Classifieds - Parts”