Got one - WTB - Gas head lamp, glass mirror insert

Post parts wanted or for sale here
Post Reply Previous topicNext topic

Topic author
Model-T&A
Posts: 12
Joined: Tue Jan 08, 2019 5:43 pm
First Name: Richard
Last Name: Ressijac
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring
Location: Massachusetts
MTFCA Life Member: YES

Got one - WTB - Gas head lamp, glass mirror insert

Post by Model-T&A » Fri Jan 13, 2023 5:07 pm

Thank you to all the forum members for checking out my search. I was successful in obtaining a replacement.

The Forum is the place to go for advice and parts. A great community for our hobby.

Rick

WTB - Glass mirror insert for a Victor Lamp Co. gas head lamp. Looking for good glass and I can have it re-mirrored if needed.

Thanks,
Rick
Attachments
mirror.jpg
measurements.jpg
Last edited by Model-T&A on Tue Jan 17, 2023 12:57 pm, edited 1 time in total.
Top
User avatar

RajoRacer
Posts: 5172
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: WTB - Gas head lamp, glass mirror insert

Post by RajoRacer » Sun Jan 15, 2023 5:03 pm

Best I can do is a 6" X 1 & 1/2"

Addendum: I re-measured the height - its a smidge over 1 & 9/16".
Top

Topic author
Model-T&A
Posts: 12
Joined: Tue Jan 08, 2019 5:43 pm
First Name: Richard
Last Name: Ressijac
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring
Location: Massachusetts
MTFCA Life Member: YES

Re: WTB - Gas head lamp, glass mirror insert

Post by Model-T&A » Mon Jan 16, 2023 12:16 pm

Hi Steve,

Thank you for your reply, and to all the forum members for reading my post.

I will recheck my measurement today and get back to you. Fingers crossed.

Thanks,
Rick
Top

Topic author
Model-T&A
Posts: 12
Joined: Tue Jan 08, 2019 5:43 pm
First Name: Richard
Last Name: Ressijac
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring
Location: Massachusetts
MTFCA Life Member: YES

Re: WTB - Gas head lamp, glass mirror insert

Post by Model-T&A » Mon Jan 16, 2023 1:58 pm

Hi Steve,

Remeasured and it appears that your mirror should fit. Mine is 6" wide and depth is 1-11/16", attached is a poor man's drawing of the measurements of the bevel. For what it is worth my mirror is etched with the manufacturer Lancaster Glass Corporation - Ohio U.S.A.

I will send a PM with my contact information.

Thank you to everyone who took the time to read my post.

Rick
Attachments
IMG_2021.jpg
Gas lamp mirror 1.pdf
(211.83 KiB) Downloaded 40 times
Top
Post Reply Previous topicNext topic

Return to “Classifieds - Parts”