Early 1926 Fan Bracket Wster Outlet FS

[Dan Hatch]

Here is a nice Early 1926 Fan Bracket Water Outlet. This is a very nice one, not broken or rusted bad. If you have an early 26 you know how hard good ones are to find. They are either broken cause someone did not know how to adjust them. Or they are rusted so bad. The pulley on this is not much good, you are buying the not broken housing not the pulley. $65.00 + shipping. Email me at address in pictures. Thanks Dan

IMG_0260.jpeg (38.12 KiB) Viewed 1027 times

[Dan Hatch]

Back to the top

[Shannon_in_Texas]

Dan, do you know roughly when the switch to the later type of bracket was made? I may be interested in this one if it fits the time frame of my project.

[Dan Hatch]

Sold pending payment

[TRDxB2]

Dan, do you know roughly when the switch to the later type of bracket was made? I may be interested in this one if it fits the time frame of my project.

From the MTFCA encyclopedia
FEB 6 Box 169, Ford Archives
A communication to Mr. Scofield from Mr. Butler, dated Feb. 6, reports that the production of the old-style water outlet connection and fan bracket which used the bolt at the bottom to both rotate and clamp the eccentric T8719B ended on January 30, 1926. Production of the new style, T8917C began on January 29, 1926.

[Shannon_in_Texas]

Thank you, Frank!